ARM: add #defines for JTAG ack codes
[openocd.git] / src / target / arm_adi_v5.h
1 /***************************************************************************
2 * Copyright (C) 2006 by Magnus Lundin *
3 * lundin@mlu.mine.nu *
4 * *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
7 * *
8 * This program is free software; you can redistribute it and/or modify *
9 * it under the terms of the GNU General Public License as published by *
10 * the Free Software Foundation; either version 2 of the License, or *
11 * (at your option) any later version. *
12 * *
13 * This program is distributed in the hope that it will be useful, *
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
16 * GNU General Public License for more details. *
17 * *
18 * You should have received a copy of the GNU General Public License *
19 * along with this program; if not, write to the *
20 * Free Software Foundation, Inc., *
21 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
22 ***************************************************************************/
23 #ifndef ARM_ADI_V5_H
24 #define ARM_ADI_V5_H
25
26 /**
27 * @file
28 * This defines formats and data structures used to talk to ADIv5 entities.
29 * Those include a DAP, different types of Debug Port (DP), and memory mapped
30 * resources accessed through a MEM-AP.
31 */
32
33 #include "arm_jtag.h"
34
35 /* JTAG instructions/registers for JTAG-DP and SWJ-DP */
36 #define JTAG_DP_ABORT 0x8
37 #define JTAG_DP_DPACC 0xA
38 #define JTAG_DP_APACC 0xB
39 #define JTAG_DP_IDCODE 0xE
40
41 /* three-bit ACK values for DPACC and APACC reads */
42 #define JTAG_ACK_OK_FAULT 0x2
43 #define JTAG_ACK_WAIT 0x1
44
45 #define DPAP_WRITE 0
46 #define DPAP_READ 1
47
48 /* A[3:0] for DP registers (for JTAG, stored in DPACC) */
49 #define DP_ZERO 0
50 #define DP_CTRL_STAT 0x4
51 #define DP_SELECT 0x8
52 #define DP_RDBUFF 0xC
53
54 /* Fields of the DP's CTRL/STAT register */
55 #define CORUNDETECT (1 << 0)
56 #define SSTICKYORUN (1 << 1)
57 /* 3:2 - transaction mode (e.g. pushed compare) */
58 #define SSTICKYERR (1 << 5)
59 #define READOK (1 << 6)
60 #define WDATAERR (1 << 7)
61 /* 11:8 - mask lanes for pushed compare or verify ops */
62 /* 21:12 - transaction counter */
63 #define CDBGRSTREQ (1 << 26)
64 #define CDBGRSTACK (1 << 27)
65 #define CDBGPWRUPREQ (1 << 28)
66 #define CDBGPWRUPACK (1 << 29)
67 #define CSYSPWRUPREQ (1 << 30)
68 #define CSYSPWRUPACK (1 << 31)
69
70 /* MEM-AP register addresses */
71 /* TODO: rename as MEM_AP_REG_* */
72 #define AP_REG_CSW 0x00
73 #define AP_REG_TAR 0x04
74 #define AP_REG_DRW 0x0C
75 #define AP_REG_BD0 0x10
76 #define AP_REG_BD1 0x14
77 #define AP_REG_BD2 0x18
78 #define AP_REG_BD3 0x1C
79 #define AP_REG_CFG 0xF4 /* big endian? */
80 #define AP_REG_BASE 0xF8
81
82 /* Generic AP register address */
83 #define AP_REG_IDR 0xFC
84
85 /* Fields of the MEM-AP's CSW register */
86 #define CSW_8BIT 0
87 #define CSW_16BIT 1
88 #define CSW_32BIT 2
89 #define CSW_ADDRINC_MASK (3 << 4)
90 #define CSW_ADDRINC_OFF 0
91 #define CSW_ADDRINC_SINGLE (1 << 4)
92 #define CSW_ADDRINC_PACKED (2 << 4)
93 #define CSW_DEVICE_EN (1 << 6)
94 #define CSW_TRIN_PROG (1 << 7)
95 #define CSW_SPIDEN (1 << 23)
96 /* 30:24 - implementation-defined! */
97 #define CSW_HPROT (1 << 25) /* ? */
98 #define CSW_MASTER_DEBUG (1 << 29) /* ? */
99 #define CSW_DBGSWENABLE (1 << 31)
100
101 /* transaction mode */
102 #define TRANS_MODE_NONE 0
103 /* Transaction waits for previous to complete */
104 #define TRANS_MODE_ATOMIC 1
105 /* Freerunning transactions with delays and overrun checking */
106 #define TRANS_MODE_COMPOSITE 2
107
108 /**
109 * This represents an ARM Debug Interface (v5) Debug Access Port (DAP).
110 * A DAP has two types of component: one Debug Port (DP), which is a
111 * transport agent; and at least one Access Port (AP), controlling
112 * resource access. Most common is a MEM-AP, for memory access.
113 *
114 * @todo Rename "swjdp_common" as "dap". Use of SWJ-DP is optional!
115 */
116 struct swjdp_common
117 {
118 struct arm_jtag *jtag_info;
119 /* Control config */
120 uint32_t dp_ctrl_stat;
121 /* Support for several AP's in one DAP */
122 uint32_t apsel;
123 /* Register select cache */
124 uint32_t dp_select_value;
125 uint32_t ap_csw_value;
126 uint32_t ap_tar_value;
127 /* information about current pending SWjDP-AHBAP transaction */
128 uint8_t trans_mode;
129 uint8_t trans_rw;
130 uint8_t ack;
131 /* extra tck clocks for memory bus access */
132 uint32_t memaccess_tck;
133 /* Size of TAR autoincrement block, ARM ADI Specification requires at least 10 bits */
134 uint32_t tar_autoincr_block;
135
136 };
137
138 /* Accessor function for currently selected DAP-AP number */
139 static inline uint8_t dap_ap_get_select(struct swjdp_common *swjdp)
140 {
141 return (uint8_t)(swjdp ->apsel >> 24);
142 }
143
144 /* Queued transactions -- use with care */
145 int dap_setup_accessport(struct swjdp_common *swjdp,
146 uint32_t csw, uint32_t tar);
147 int dap_ap_select(struct swjdp_common *swjdp,uint8_t apsel);
148 int dap_ap_write_reg_u32(struct swjdp_common *swjdp,
149 uint32_t addr, uint32_t value);
150 int dap_ap_read_reg_u32(struct swjdp_common *swjdp,
151 uint32_t addr, uint32_t *value);
152
153 /* Queued transactions must be completed with swjdp_transaction_endcheck() */
154 int swjdp_transaction_endcheck(struct swjdp_common *swjdp);
155
156 /* MEM-AP memory mapped bus single uint32_t register transfers, without endcheck */
157 int mem_ap_read_u32(struct swjdp_common *swjdp, uint32_t address, uint32_t *value);
158 int mem_ap_write_u32(struct swjdp_common *swjdp, uint32_t address, uint32_t value);
159
160 /* MEM-AP memory mapped bus transfers, single registers, complete transactions */
161 int mem_ap_read_atomic_u32(struct swjdp_common *swjdp,
162 uint32_t address, uint32_t *value);
163 int mem_ap_write_atomic_u32(struct swjdp_common *swjdp,
164 uint32_t address, uint32_t value);
165
166 /* MEM-AP memory mapped bus block transfers */
167 int mem_ap_read_buf_u8(struct swjdp_common *swjdp,
168 uint8_t *buffer, int count, uint32_t address);
169 int mem_ap_read_buf_u16(struct swjdp_common *swjdp,
170 uint8_t *buffer, int count, uint32_t address);
171 int mem_ap_read_buf_u32(struct swjdp_common *swjdp,
172 uint8_t *buffer, int count, uint32_t address);
173
174 int mem_ap_write_buf_u8(struct swjdp_common *swjdp,
175 uint8_t *buffer, int count, uint32_t address);
176 int mem_ap_write_buf_u16(struct swjdp_common *swjdp,
177 uint8_t *buffer, int count, uint32_t address);
178 int mem_ap_write_buf_u32(struct swjdp_common *swjdp,
179 uint8_t *buffer, int count, uint32_t address);
180
181 /* Initialisation of the debug system, power domains and registers */
182 int ahbap_debugport_init(struct swjdp_common *swjdp);
183
184
185 /* Commands for user dap access */
186 int dap_info_command(struct command_context *cmd_ctx,
187 struct swjdp_common *swjdp, int apsel);
188
189 #define DAP_COMMAND_HANDLER(name) \
190 COMMAND_HELPER(name, struct swjdp_common *swjdp)
191 DAP_COMMAND_HANDLER(dap_baseaddr_command);
192 DAP_COMMAND_HANDLER(dap_memaccess_command);
193 DAP_COMMAND_HANDLER(dap_apsel_command);
194 DAP_COMMAND_HANDLER(dap_apid_command);
195
196 #endif

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)