armv7m: add gdb target description support
[openocd.git] / src / target / arm_dpm.h
1 /*
2 * Copyright (C) 2009 by David Brownell
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the
16 * Free Software Foundation, Inc.,
17 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
18 */
19
20 #ifndef __ARM_DPM_H
21 #define __ARM_DPM_H
22
23 /**
24 * @file
25 * This is the interface to the Debug Programmers Model for ARMv6 and
26 * ARMv7 processors. ARMv6 processors (such as ARM11xx implementations)
27 * introduced a model which became part of the ARMv7-AR architecture
28 * which is most familiar through the Cortex-A series parts. While
29 * specific details differ (like how to write the instruction register),
30 * the high level models easily support shared code because those
31 * registers are compatible.
32 */
33
34 struct dpm_bpwp {
35 unsigned number;
36 uint32_t address;
37 uint32_t control;
38 /* true if hardware state needs flushing */
39 bool dirty;
40 };
41
42 struct dpm_bp {
43 struct breakpoint *bp;
44 struct dpm_bpwp bpwp;
45 };
46
47 struct dpm_wp {
48 struct watchpoint *wp;
49 struct dpm_bpwp bpwp;
50 };
51
52 /**
53 * This wraps an implementation of DPM primitives. Each interface
54 * provider supplies a structure like this, which is the glue between
55 * upper level code and the lower level hardware access.
56 *
57 * It is a PRELIMINARY AND INCOMPLETE set of primitives, starting with
58 * support for CPU register access.
59 */
60 struct arm_dpm {
61 struct arm *arm;
62
63 /** Cache of DIDR */
64 uint32_t didr;
65
66 /** Invoke before a series of instruction operations */
67 int (*prepare)(struct arm_dpm *);
68
69 /** Invoke after a series of instruction operations */
70 int (*finish)(struct arm_dpm *);
71
72 /* WRITE TO CPU */
73
74 /** Runs one instruction, writing data to DCC before execution. */
75 int (*instr_write_data_dcc)(struct arm_dpm *,
76 uint32_t opcode, uint32_t data);
77
78 /** Runs one instruction, writing data to R0 before execution. */
79 int (*instr_write_data_r0)(struct arm_dpm *,
80 uint32_t opcode, uint32_t data);
81
82 /** Optional core-specific operation invoked after CPSR writes. */
83 int (*instr_cpsr_sync)(struct arm_dpm *dpm);
84
85 /* READ FROM CPU */
86
87 /** Runs one instruction, reading data from dcc after execution. */
88 int (*instr_read_data_dcc)(struct arm_dpm *,
89 uint32_t opcode, uint32_t *data);
90
91 /** Runs one instruction, reading data from r0 after execution. */
92 int (*instr_read_data_r0)(struct arm_dpm *,
93 uint32_t opcode, uint32_t *data);
94
95 /* BREAKPOINT/WATCHPOINT SUPPORT */
96
97 /**
98 * Enables one breakpoint or watchpoint by writing to the
99 * hardware registers. The specified breakpoint/watchpoint
100 * must currently be disabled. Indices 0..15 are used for
101 * breakpoints; indices 16..31 are for watchpoints.
102 */
103 int (*bpwp_enable)(struct arm_dpm *, unsigned index_value,
104 uint32_t addr, uint32_t control);
105
106 /**
107 * Disables one breakpoint or watchpoint by clearing its
108 * hardware control registers. Indices are the same ones
109 * accepted by bpwp_enable().
110 */
111 int (*bpwp_disable)(struct arm_dpm *, unsigned index_value);
112
113 /* The breakpoint and watchpoint arrays are private to the
114 * DPM infrastructure. There are nbp indices in the dbp
115 * array. There are nwp indices in the dwp array.
116 */
117
118 unsigned nbp;
119 unsigned nwp;
120 struct dpm_bp *dbp;
121 struct dpm_wp *dwp;
122
123 /** Address of the instruction which triggered a watchpoint. */
124 uint32_t wp_pc;
125
126 /** Recent value of DSCR. */
127 uint32_t dscr;
128
129 /* FIXME -- read/write DCSR methods and symbols */
130 };
131
132 int arm_dpm_setup(struct arm_dpm *dpm);
133 int arm_dpm_initialize(struct arm_dpm *dpm);
134
135 int arm_dpm_read_current_registers(struct arm_dpm *);
136 int dpm_modeswitch(struct arm_dpm *dpm, enum arm_mode mode);
137
138
139 int arm_dpm_write_dirty_registers(struct arm_dpm *, bool bpwp);
140
141 void arm_dpm_report_wfar(struct arm_dpm *, uint32_t wfar);
142
143 /* DSCR bits; see ARMv7a arch spec section C10.3.1.
144 * Not all v7 bits are valid in v6.
145 */
146 #define DSCR_CORE_HALTED (0x1 << 0)
147 #define DSCR_CORE_RESTARTED (0x1 << 1)
148 #define DSCR_ENTRY_MASK (0xF << 2)
149 #define DSCR_STICKY_ABORT_PRECISE (0x1 << 6)
150 #define DSCR_STICKY_ABORT_IMPRECISE (0x1 << 7)
151 #define DSCR_STICKY_UNDEFINED (0x1 << 8)
152 #define DSCR_DBG_NOPWRDWN (0x1 << 9) /* v6 only */
153 #define DSCR_DBG_ACK (0x1 << 10)
154 #define DSCR_INT_DIS (0x1 << 11)
155 #define DSCR_CP14_USR_COMMS (0x1 << 12)
156 #define DSCR_ITR_EN (0x1 << 13)
157 #define DSCR_HALT_DBG_MODE (0x1 << 14)
158 #define DSCR_MON_DBG_MODE (0x1 << 15)
159 #define DSCR_SEC_PRIV_INVASV_DIS (0x1 << 16)
160 #define DSCR_SEC_PRIV_NINVASV_DIS (0x1 << 17)
161 #define DSCR_NON_SECURE (0x1 << 18)
162 #define DSCR_DSCRD_IMPRECISE_ABORT (0x1 << 19)
163 #define DSCR_EXT_DCC_MASK (0x3 << 20) /* DTR mode */ /* bits 22, 23 are reserved */
164 #define DSCR_INSTR_COMP (0x1 << 24)
165 #define DSCR_PIPE_ADVANCE (0x1 << 25)
166 #define DSCR_DTRTX_FULL_LATCHED (0x1 << 26)
167 #define DSCR_DTRRX_FULL_LATCHED (0x1 << 27) /* bit 28 is reserved */
168 #define DSCR_DTR_TX_FULL (0x1 << 29)
169 #define DSCR_DTR_RX_FULL (0x1 << 30) /* bit 31 is reserved */
170
171 #define DSCR_ENTRY(dscr) (((dscr) >> 2) & 0xf)
172 #define DSCR_RUN_MODE(dscr) ((dscr) & (DSCR_CORE_HALTED | DSCR_CORE_RESTARTED))
173
174
175 /* Methods of entry into debug mode */
176 #define DSCR_ENTRY_HALT_REQ (0x0 << 2)
177 #define DSCR_ENTRY_BREAKPOINT (0x1 << 2)
178 #define DSCR_ENTRY_IMPRECISE_WATCHPT (0x2 << 2)
179 #define DSCR_ENTRY_BKPT_INSTR (0x3 << 2)
180 #define DSCR_ENTRY_EXT_DBG_REQ (0x4 << 2)
181 #define DSCR_ENTRY_VECT_CATCH (0x5 << 2)
182 #define DSCR_ENTRY_D_SIDE_ABORT (0x6 << 2) /* v6 only */
183 #define DSCR_ENTRY_I_SIDE_ABORT (0x7 << 2) /* v6 only */
184 #define DSCR_ENTRY_OS_UNLOCK (0x8 << 2)
185 #define DSCR_ENTRY_PRECISE_WATCHPT (0xA << 2)
186
187 /* DTR modes */
188 #define DSCR_EXT_DCC_NON_BLOCKING (0x0 << 20)
189 #define DSCR_EXT_DCC_STALL_MODE (0x1 << 20)
190 #define DSCR_EXT_DCC_FAST_MODE (0x2 << 20) /* bits 22, 23 are reserved */
191
192
193
194
195
196 /* DRCR (debug run control register) bits */
197 #define DRCR_HALT (1 << 0)
198 #define DRCR_RESTART (1 << 1)
199 #define DRCR_CLEAR_EXCEPTIONS (1 << 2)
200
201 void arm_dpm_report_dscr(struct arm_dpm *dpm, uint32_t dcsr);
202
203 #endif /* __ARM_DPM_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)