Code Review / openocd.git / blob
? search:
summary | shortlog | log | commit | commitdiff | review | tree
history | raw | HEAD
cortex_m.c: Use two byte breakpoint for 32bit Thumb-2 request
[openocd.git] / src / target / cortex_m.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * Copyright (C) 2006 by Magnus Lundin *
6 * lundin@mlu.mine.nu *
7 * *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
10 * *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
15 * *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
20 * *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
25 * *
26 * *
27 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
28 * *
29 ***************************************************************************/
30 #ifdef HAVE_CONFIG_H
31 #include "config.h"
32 #endif
33
34 #include "jtag/interface.h"
35 #include "breakpoints.h"
36 #include "cortex_m.h"
37 #include "target_request.h"
38 #include "target_type.h"
39 #include "arm_disassembler.h"
40 #include "register.h"
41 #include "arm_opcodes.h"
42 #include "arm_semihosting.h"
43 #include <helper/time_support.h>
44
45 /* NOTE: most of this should work fine for the Cortex-M1 and
46 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
47 * Some differences: M0/M1 doesn't have FBP remapping or the
48 * DWT tracing/profiling support. (So the cycle counter will
49 * not be usable; the other stuff isn't currently used here.)
50 *
51 * Although there are some workarounds for errata seen only in r0p0
52 * silicon, such old parts are hard to find and thus not much tested
53 * any longer.
54 */
55
56 /**
57 * Returns the type of a break point required by address location
58 */
59 #define BKPT_TYPE_BY_ADDR(addr) ((addr) < 0x20000000 ? BKPT_HARD : BKPT_SOFT)
60
61 /* forward declarations */
62 static int cortex_m_store_core_reg_u32(struct target *target,
63 uint32_t num, uint32_t value);
64
65 static int cortexm_dap_read_coreregister_u32(struct target *target,
66 uint32_t *value, int regnum)
67 {
68 struct armv7m_common *armv7m = target_to_armv7m(target);
69 struct adiv5_dap *swjdp = armv7m->arm.dap;
70 int retval;
71 uint32_t dcrdr;
72
73 /* because the DCB_DCRDR is used for the emulated dcc channel
74 * we have to save/restore the DCB_DCRDR when used */
75 if (target->dbg_msg_enabled) {
76 retval = mem_ap_read_u32(swjdp, DCB_DCRDR, &dcrdr);
77 if (retval != ERROR_OK)
78 return retval;
79 }
80
81 retval = mem_ap_write_u32(swjdp, DCB_DCRSR, regnum);
82 if (retval != ERROR_OK)
83 return retval;
84
85 retval = mem_ap_read_atomic_u32(swjdp, DCB_DCRDR, value);
86 if (retval != ERROR_OK)
87 return retval;
88
89 if (target->dbg_msg_enabled) {
90 /* restore DCB_DCRDR - this needs to be in a separate
91 * transaction otherwise the emulated DCC channel breaks */
92 if (retval == ERROR_OK)
93 retval = mem_ap_write_atomic_u32(swjdp, DCB_DCRDR, dcrdr);
94 }
95
96 return retval;
97 }
98
99 static int cortexm_dap_write_coreregister_u32(struct target *target,
100 uint32_t value, int regnum)
101 {
102 struct armv7m_common *armv7m = target_to_armv7m(target);
103 struct adiv5_dap *swjdp = armv7m->arm.dap;
104 int retval;
105 uint32_t dcrdr;
106
107 /* because the DCB_DCRDR is used for the emulated dcc channel
108 * we have to save/restore the DCB_DCRDR when used */
109 if (target->dbg_msg_enabled) {
110 retval = mem_ap_read_u32(swjdp, DCB_DCRDR, &dcrdr);
111 if (retval != ERROR_OK)
112 return retval;
113 }
114
115 retval = mem_ap_write_u32(swjdp, DCB_DCRDR, value);
116 if (retval != ERROR_OK)
117 return retval;
118
119 retval = mem_ap_write_atomic_u32(swjdp, DCB_DCRSR, regnum | DCRSR_WnR);
120 if (retval != ERROR_OK)
121 return retval;
122
123 if (target->dbg_msg_enabled) {
124 /* restore DCB_DCRDR - this needs to be in a seperate
125 * transaction otherwise the emulated DCC channel breaks */
126 if (retval == ERROR_OK)
127 retval = mem_ap_write_atomic_u32(swjdp, DCB_DCRDR, dcrdr);
128 }
129
130 return retval;
131 }
132
133 static int cortex_m_write_debug_halt_mask(struct target *target,
134 uint32_t mask_on, uint32_t mask_off)
135 {
136 struct cortex_m_common *cortex_m = target_to_cm(target);
137 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
138
139 /* mask off status bits */
140 cortex_m->dcb_dhcsr &= ~((0xFFFF << 16) | mask_off);
141 /* create new register mask */
142 cortex_m->dcb_dhcsr |= DBGKEY | C_DEBUGEN | mask_on;
143
144 return mem_ap_write_atomic_u32(swjdp, DCB_DHCSR, cortex_m->dcb_dhcsr);
145 }
146
147 static int cortex_m_clear_halt(struct target *target)
148 {
149 struct cortex_m_common *cortex_m = target_to_cm(target);
150 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
151 int retval;
152
153 /* clear step if any */
154 cortex_m_write_debug_halt_mask(target, C_HALT, C_STEP);
155
156 /* Read Debug Fault Status Register */
157 retval = mem_ap_read_atomic_u32(swjdp, NVIC_DFSR, &cortex_m->nvic_dfsr);
158 if (retval != ERROR_OK)
159 return retval;
160
161 /* Clear Debug Fault Status */
162 retval = mem_ap_write_atomic_u32(swjdp, NVIC_DFSR, cortex_m->nvic_dfsr);
163 if (retval != ERROR_OK)
164 return retval;
165 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32 "", cortex_m->nvic_dfsr);
166
167 return ERROR_OK;
168 }
169
170 static int cortex_m_single_step_core(struct target *target)
171 {
172 struct cortex_m_common *cortex_m = target_to_cm(target);
173 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
174 uint32_t dhcsr_save;
175 int retval;
176
177 /* backup dhcsr reg */
178 dhcsr_save = cortex_m->dcb_dhcsr;
179
180 /* Mask interrupts before clearing halt, if done already. This avoids
181 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
182 * HALT can put the core into an unknown state.
183 */
184 if (!(cortex_m->dcb_dhcsr & C_MASKINTS)) {
185 retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
186 DBGKEY | C_MASKINTS | C_HALT | C_DEBUGEN);
187 if (retval != ERROR_OK)
188 return retval;
189 }
190 retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
191 DBGKEY | C_MASKINTS | C_STEP | C_DEBUGEN);
192 if (retval != ERROR_OK)
193 return retval;
194 LOG_DEBUG(" ");
195
196 /* restore dhcsr reg */
197 cortex_m->dcb_dhcsr = dhcsr_save;
198 cortex_m_clear_halt(target);
199
200 return ERROR_OK;
201 }
202
203 static int cortex_m_enable_fpb(struct target *target)
204 {
205 int retval = target_write_u32(target, FP_CTRL, 3);
206 if (retval != ERROR_OK)
207 return retval;
208
209 /* check the fpb is actually enabled */
210 uint32_t fpctrl;
211 retval = target_read_u32(target, FP_CTRL, &fpctrl);
212 if (retval != ERROR_OK)
213 return retval;
214
215 if (fpctrl & 1)
216 return ERROR_OK;
217
218 return ERROR_FAIL;
219 }
220
221 static int cortex_m_endreset_event(struct target *target)
222 {
223 int i;
224 int retval;
225 uint32_t dcb_demcr;
226 struct cortex_m_common *cortex_m = target_to_cm(target);
227 struct armv7m_common *armv7m = &cortex_m->armv7m;
228 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
229 struct cortex_m_fp_comparator *fp_list = cortex_m->fp_comparator_list;
230 struct cortex_m_dwt_comparator *dwt_list = cortex_m->dwt_comparator_list;
231
232 /* REVISIT The four debug monitor bits are currently ignored... */
233 retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &dcb_demcr);
234 if (retval != ERROR_OK)
235 return retval;
236 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32 "", dcb_demcr);
237
238 /* this register is used for emulated dcc channel */
239 retval = mem_ap_write_u32(swjdp, DCB_DCRDR, 0);
240 if (retval != ERROR_OK)
241 return retval;
242
243 /* Enable debug requests */
244 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m->dcb_dhcsr);
245 if (retval != ERROR_OK)
246 return retval;
247 if (!(cortex_m->dcb_dhcsr & C_DEBUGEN)) {
248 retval = mem_ap_write_u32(swjdp, DCB_DHCSR, DBGKEY | C_DEBUGEN);
249 if (retval != ERROR_OK)
250 return retval;
251 }
252
253 /* clear any interrupt masking */
254 cortex_m_write_debug_halt_mask(target, 0, C_MASKINTS);
255
256 /* Enable features controlled by ITM and DWT blocks, and catch only
257 * the vectors we were told to pay attention to.
258 *
259 * Target firmware is responsible for all fault handling policy
260 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
261 * or manual updates to the NVIC SHCSR and CCR registers.
262 */
263 retval = mem_ap_write_u32(swjdp, DCB_DEMCR, TRCENA | armv7m->demcr);
264 if (retval != ERROR_OK)
265 return retval;
266
267 /* Paranoia: evidently some (early?) chips don't preserve all the
268 * debug state (including FBP, DWT, etc) across reset...
269 */
270
271 /* Enable FPB */
272 retval = cortex_m_enable_fpb(target);
273 if (retval != ERROR_OK) {
274 LOG_ERROR("Failed to enable the FPB");
275 return retval;
276 }
277
278 cortex_m->fpb_enabled = 1;
279
280 /* Restore FPB registers */
281 for (i = 0; i < cortex_m->fp_num_code + cortex_m->fp_num_lit; i++) {
282 retval = target_write_u32(target, fp_list[i].fpcr_address, fp_list[i].fpcr_value);
283 if (retval != ERROR_OK)
284 return retval;
285 }
286
287 /* Restore DWT registers */
288 for (i = 0; i < cortex_m->dwt_num_comp; i++) {
289 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 0,
290 dwt_list[i].comp);
291 if (retval != ERROR_OK)
292 return retval;
293 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 4,
294 dwt_list[i].mask);
295 if (retval != ERROR_OK)
296 return retval;
297 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 8,
298 dwt_list[i].function);
299 if (retval != ERROR_OK)
300 return retval;
301 }
302 retval = dap_run(swjdp);
303 if (retval != ERROR_OK)
304 return retval;
305
306 register_cache_invalidate(armv7m->arm.core_cache);
307
308 /* make sure we have latest dhcsr flags */
309 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m->dcb_dhcsr);
310
311 return retval;
312 }
313
314 static int cortex_m_examine_debug_reason(struct target *target)
315 {
316 struct cortex_m_common *cortex_m = target_to_cm(target);
317
318 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason
319 * only check the debug reason if we don't know it already */
320
321 if ((target->debug_reason != DBG_REASON_DBGRQ)
322 && (target->debug_reason != DBG_REASON_SINGLESTEP)) {
323 if (cortex_m->nvic_dfsr & DFSR_BKPT) {
324 target->debug_reason = DBG_REASON_BREAKPOINT;
325 if (cortex_m->nvic_dfsr & DFSR_DWTTRAP)
326 target->debug_reason = DBG_REASON_WPTANDBKPT;
327 } else if (cortex_m->nvic_dfsr & DFSR_DWTTRAP)
328 target->debug_reason = DBG_REASON_WATCHPOINT;
329 else if (cortex_m->nvic_dfsr & DFSR_VCATCH)
330 target->debug_reason = DBG_REASON_BREAKPOINT;
331 else /* EXTERNAL, HALTED */
332 target->debug_reason = DBG_REASON_UNDEFINED;
333 }
334
335 return ERROR_OK;
336 }
337
338 static int cortex_m_examine_exception_reason(struct target *target)
339 {
340 uint32_t shcsr = 0, except_sr = 0, cfsr = -1, except_ar = -1;
341 struct armv7m_common *armv7m = target_to_armv7m(target);
342 struct adiv5_dap *swjdp = armv7m->arm.dap;
343 int retval;
344
345 retval = mem_ap_read_u32(swjdp, NVIC_SHCSR, &shcsr);
346 if (retval != ERROR_OK)
347 return retval;
348 switch (armv7m->exception_number) {
349 case 2: /* NMI */
350 break;
351 case 3: /* Hard Fault */
352 retval = mem_ap_read_atomic_u32(swjdp, NVIC_HFSR, &except_sr);
353 if (retval != ERROR_OK)
354 return retval;
355 if (except_sr & 0x40000000) {
356 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &cfsr);
357 if (retval != ERROR_OK)
358 return retval;
359 }
360 break;
361 case 4: /* Memory Management */
362 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
363 if (retval != ERROR_OK)
364 return retval;
365 retval = mem_ap_read_u32(swjdp, NVIC_MMFAR, &except_ar);
366 if (retval != ERROR_OK)
367 return retval;
368 break;
369 case 5: /* Bus Fault */
370 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
371 if (retval != ERROR_OK)
372 return retval;
373 retval = mem_ap_read_u32(swjdp, NVIC_BFAR, &except_ar);
374 if (retval != ERROR_OK)
375 return retval;
376 break;
377 case 6: /* Usage Fault */
378 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
379 if (retval != ERROR_OK)
380 return retval;
381 break;
382 case 11: /* SVCall */
383 break;
384 case 12: /* Debug Monitor */
385 retval = mem_ap_read_u32(swjdp, NVIC_DFSR, &except_sr);
386 if (retval != ERROR_OK)
387 return retval;
388 break;
389 case 14: /* PendSV */
390 break;
391 case 15: /* SysTick */
392 break;
393 default:
394 except_sr = 0;
395 break;
396 }
397 retval = dap_run(swjdp);
398 if (retval == ERROR_OK)
399 LOG_DEBUG("%s SHCSR 0x%" PRIx32 ", SR 0x%" PRIx32
400 ", CFSR 0x%" PRIx32 ", AR 0x%" PRIx32,
401 armv7m_exception_string(armv7m->exception_number),
402 shcsr, except_sr, cfsr, except_ar);
403 return retval;
404 }
405
406 static int cortex_m_debug_entry(struct target *target)
407 {
408 int i;
409 uint32_t xPSR;
410 int retval;
411 struct cortex_m_common *cortex_m = target_to_cm(target);
412 struct armv7m_common *armv7m = &cortex_m->armv7m;
413 struct arm *arm = &armv7m->arm;
414 struct adiv5_dap *swjdp = armv7m->arm.dap;
415 struct reg *r;
416
417 LOG_DEBUG(" ");
418
419 cortex_m_clear_halt(target);
420 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m->dcb_dhcsr);
421 if (retval != ERROR_OK)
422 return retval;
423
424 retval = armv7m->examine_debug_reason(target);
425 if (retval != ERROR_OK)
426 return retval;
427
428 /* Examine target state and mode
429 * First load register accessible through core debug port */
430 int num_regs = arm->core_cache->num_regs;
431
432 for (i = 0; i < num_regs; i++) {
433 r = &armv7m->arm.core_cache->reg_list[i];
434 if (!r->valid)
435 arm->read_core_reg(target, r, i, ARM_MODE_ANY);
436 }
437
438 r = arm->cpsr;
439 xPSR = buf_get_u32(r->value, 0, 32);
440
441 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
442 if (xPSR & 0xf00) {
443 r->dirty = r->valid;
444 cortex_m_store_core_reg_u32(target, 16, xPSR & ~0xff);
445 }
446
447 /* Are we in an exception handler */
448 if (xPSR & 0x1FF) {
449 armv7m->exception_number = (xPSR & 0x1FF);
450
451 arm->core_mode = ARM_MODE_HANDLER;
452 arm->map = armv7m_msp_reg_map;
453 } else {
454 unsigned control = buf_get_u32(arm->core_cache
455 ->reg_list[ARMV7M_CONTROL].value, 0, 2);
456
457 /* is this thread privileged? */
458 arm->core_mode = control & 1
459 ? ARM_MODE_USER_THREAD
460 : ARM_MODE_THREAD;
461
462 /* which stack is it using? */
463 if (control & 2)
464 arm->map = armv7m_psp_reg_map;
465 else
466 arm->map = armv7m_msp_reg_map;
467
468 armv7m->exception_number = 0;
469 }
470
471 if (armv7m->exception_number)
472 cortex_m_examine_exception_reason(target);
473
474 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32 ", target->state: %s",
475 arm_mode_name(arm->core_mode),
476 *(uint32_t *)(arm->pc->value),
477 target_state_name(target));
478
479 if (armv7m->post_debug_entry) {
480 retval = armv7m->post_debug_entry(target);
481 if (retval != ERROR_OK)
482 return retval;
483 }
484
485 return ERROR_OK;
486 }
487
488 static int cortex_m_poll(struct target *target)
489 {
490 int detected_failure = ERROR_OK;
491 int retval = ERROR_OK;
492 enum target_state prev_target_state = target->state;
493 struct cortex_m_common *cortex_m = target_to_cm(target);
494 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
495
496 /* Read from Debug Halting Control and Status Register */
497 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m->dcb_dhcsr);
498 if (retval != ERROR_OK) {
499 target->state = TARGET_UNKNOWN;
500 return retval;
501 }
502
503 /* Recover from lockup. See ARMv7-M architecture spec,
504 * section B1.5.15 "Unrecoverable exception cases".
505 */
506 if (cortex_m->dcb_dhcsr & S_LOCKUP) {
507 LOG_ERROR("%s -- clearing lockup after double fault",
508 target_name(target));
509 cortex_m_write_debug_halt_mask(target, C_HALT, 0);
510 target->debug_reason = DBG_REASON_DBGRQ;
511
512 /* We have to execute the rest (the "finally" equivalent, but
513 * still throw this exception again).
514 */
515 detected_failure = ERROR_FAIL;
516
517 /* refresh status bits */
518 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m->dcb_dhcsr);
519 if (retval != ERROR_OK)
520 return retval;
521 }
522
523 if (cortex_m->dcb_dhcsr & S_RESET_ST) {
524 target->state = TARGET_RESET;
525 return ERROR_OK;
526 }
527
528 if (target->state == TARGET_RESET) {
529 /* Cannot switch context while running so endreset is
530 * called with target->state == TARGET_RESET
531 */
532 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32,
533 cortex_m->dcb_dhcsr);
534 retval = cortex_m_endreset_event(target);
535 if (retval != ERROR_OK) {
536 target->state = TARGET_UNKNOWN;
537 return retval;
538 }
539 target->state = TARGET_RUNNING;
540 prev_target_state = TARGET_RUNNING;
541 }
542
543 if (cortex_m->dcb_dhcsr & S_HALT) {
544 target->state = TARGET_HALTED;
545
546 if ((prev_target_state == TARGET_RUNNING) || (prev_target_state == TARGET_RESET)) {
547 retval = cortex_m_debug_entry(target);
548 if (retval != ERROR_OK)
549 return retval;
550
551 if (arm_semihosting(target, &retval) != 0)
552 return retval;
553
554 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
555 }
556 if (prev_target_state == TARGET_DEBUG_RUNNING) {
557 LOG_DEBUG(" ");
558 retval = cortex_m_debug_entry(target);
559 if (retval != ERROR_OK)
560 return retval;
561
562 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_HALTED);
563 }
564 }
565
566 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
567 * How best to model low power modes?
568 */
569
570 if (target->state == TARGET_UNKNOWN) {
571 /* check if processor is retiring instructions */
572 if (cortex_m->dcb_dhcsr & S_RETIRE_ST) {
573 target->state = TARGET_RUNNING;
574 retval = ERROR_OK;
575 }
576 }
577
578 /* Did we detect a failure condition that we cleared? */
579 if (detected_failure != ERROR_OK)
580 retval = detected_failure;
581 return retval;
582 }
583
584 static int cortex_m_halt(struct target *target)
585 {
586 LOG_DEBUG("target->state: %s",
587 target_state_name(target));
588
589 if (target->state == TARGET_HALTED) {
590 LOG_DEBUG("target was already halted");
591 return ERROR_OK;
592 }
593
594 if (target->state == TARGET_UNKNOWN)
595 LOG_WARNING("target was in unknown state when halt was requested");
596
597 if (target->state == TARGET_RESET) {
598 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST) && jtag_get_srst()) {
599 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
600 return ERROR_TARGET_FAILURE;
601 } else {
602 /* we came here in a reset_halt or reset_init sequence
603 * debug entry was already prepared in cortex_m3_assert_reset()
604 */
605 target->debug_reason = DBG_REASON_DBGRQ;
606
607 return ERROR_OK;
608 }
609 }
610
611 /* Write to Debug Halting Control and Status Register */
612 cortex_m_write_debug_halt_mask(target, C_HALT, 0);
613
614 target->debug_reason = DBG_REASON_DBGRQ;
615
616 return ERROR_OK;
617 }
618
619 static int cortex_m_soft_reset_halt(struct target *target)
620 {
621 struct cortex_m_common *cortex_m = target_to_cm(target);
622 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
623 uint32_t dcb_dhcsr = 0;
624 int retval, timeout = 0;
625
626 /* soft_reset_halt is deprecated on cortex_m as the same functionality
627 * can be obtained by using 'reset halt' and 'cortex_m reset_config vectreset'
628 * As this reset only used VC_CORERESET it would only ever reset the cortex_m
629 * core, not the peripherals */
630 LOG_WARNING("soft_reset_halt is deprecated, please use 'reset halt' instead.");
631
632 /* Enter debug state on reset; restore DEMCR in endreset_event() */
633 retval = mem_ap_write_u32(swjdp, DCB_DEMCR,
634 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
635 if (retval != ERROR_OK)
636 return retval;
637
638 /* Request a core-only reset */
639 retval = mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR,
640 AIRCR_VECTKEY | AIRCR_VECTRESET);
641 if (retval != ERROR_OK)
642 return retval;
643 target->state = TARGET_RESET;
644
645 /* registers are now invalid */
646 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
647
648 while (timeout < 100) {
649 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &dcb_dhcsr);
650 if (retval == ERROR_OK) {
651 retval = mem_ap_read_atomic_u32(swjdp, NVIC_DFSR,
652 &cortex_m->nvic_dfsr);
653 if (retval != ERROR_OK)
654 return retval;
655 if ((dcb_dhcsr & S_HALT)
656 && (cortex_m->nvic_dfsr & DFSR_VCATCH)) {
657 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
658 "DFSR 0x%08x",
659 (unsigned) dcb_dhcsr,
660 (unsigned) cortex_m->nvic_dfsr);
661 cortex_m_poll(target);
662 /* FIXME restore user's vector catch config */
663 return ERROR_OK;
664 } else
665 LOG_DEBUG("waiting for system reset-halt, "
666 "DHCSR 0x%08x, %d ms",
667 (unsigned) dcb_dhcsr, timeout);
668 }
669 timeout++;
670 alive_sleep(1);
671 }
672
673 return ERROR_OK;
674 }
675
676 void cortex_m_enable_breakpoints(struct target *target)
677 {
678 struct breakpoint *breakpoint = target->breakpoints;
679
680 /* set any pending breakpoints */
681 while (breakpoint) {
682 if (!breakpoint->set)
683 cortex_m_set_breakpoint(target, breakpoint);
684 breakpoint = breakpoint->next;
685 }
686 }
687
688 static int cortex_m_resume(struct target *target, int current,
689 uint32_t address, int handle_breakpoints, int debug_execution)
690 {
691 struct armv7m_common *armv7m = target_to_armv7m(target);
692 struct breakpoint *breakpoint = NULL;
693 uint32_t resume_pc;
694 struct reg *r;
695
696 if (target->state != TARGET_HALTED) {
697 LOG_WARNING("target not halted");
698 return ERROR_TARGET_NOT_HALTED;
699 }
700
701 if (!debug_execution) {
702 target_free_all_working_areas(target);
703 cortex_m_enable_breakpoints(target);
704 cortex_m_enable_watchpoints(target);
705 }
706
707 if (debug_execution) {
708 r = armv7m->arm.core_cache->reg_list + ARMV7M_PRIMASK;
709
710 /* Disable interrupts */
711 /* We disable interrupts in the PRIMASK register instead of
712 * masking with C_MASKINTS. This is probably the same issue
713 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
714 * in parallel with disabled interrupts can cause local faults
715 * to not be taken.
716 *
717 * REVISIT this clearly breaks non-debug execution, since the
718 * PRIMASK register state isn't saved/restored... workaround
719 * by never resuming app code after debug execution.
720 */
721 buf_set_u32(r->value, 0, 1, 1);
722 r->dirty = true;
723 r->valid = true;
724
725 /* Make sure we are in Thumb mode */
726 r = armv7m->arm.cpsr;
727 buf_set_u32(r->value, 24, 1, 1);
728 r->dirty = true;
729 r->valid = true;
730 }
731
732 /* current = 1: continue on current pc, otherwise continue at <address> */
733 r = armv7m->arm.pc;
734 if (!current) {
735 buf_set_u32(r->value, 0, 32, address);
736 r->dirty = true;
737 r->valid = true;
738 }
739
740 /* if we halted last time due to a bkpt instruction
741 * then we have to manually step over it, otherwise
742 * the core will break again */
743
744 if (!breakpoint_find(target, buf_get_u32(r->value, 0, 32))
745 && !debug_execution)
746 armv7m_maybe_skip_bkpt_inst(target, NULL);
747
748 resume_pc = buf_get_u32(r->value, 0, 32);
749
750 armv7m_restore_context(target);
751
752 /* the front-end may request us not to handle breakpoints */
753 if (handle_breakpoints) {
754 /* Single step past breakpoint at current address */
755 breakpoint = breakpoint_find(target, resume_pc);
756 if (breakpoint) {
757 LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32 " (ID: %" PRIu32 ")",
758 breakpoint->address,
759 breakpoint->unique_id);
760 cortex_m_unset_breakpoint(target, breakpoint);
761 cortex_m_single_step_core(target);
762 cortex_m_set_breakpoint(target, breakpoint);
763 }
764 }
765
766 /* Restart core */
767 cortex_m_write_debug_halt_mask(target, 0, C_HALT);
768
769 target->debug_reason = DBG_REASON_NOTHALTED;
770
771 /* registers are now invalid */
772 register_cache_invalidate(armv7m->arm.core_cache);
773
774 if (!debug_execution) {
775 target->state = TARGET_RUNNING;
776 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
777 LOG_DEBUG("target resumed at 0x%" PRIx32 "", resume_pc);
778 } else {
779 target->state = TARGET_DEBUG_RUNNING;
780 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
781 LOG_DEBUG("target debug resumed at 0x%" PRIx32 "", resume_pc);
782 }
783
784 return ERROR_OK;
785 }
786
787 /* int irqstepcount = 0; */
788 static int cortex_m_step(struct target *target, int current,
789 uint32_t address, int handle_breakpoints)
790 {
791 struct cortex_m_common *cortex_m = target_to_cm(target);
792 struct armv7m_common *armv7m = &cortex_m->armv7m;
793 struct adiv5_dap *swjdp = armv7m->arm.dap;
794 struct breakpoint *breakpoint = NULL;
795 struct reg *pc = armv7m->arm.pc;
796 bool bkpt_inst_found = false;
797 int retval;
798 bool isr_timed_out = false;
799
800 if (target->state != TARGET_HALTED) {
801 LOG_WARNING("target not halted");
802 return ERROR_TARGET_NOT_HALTED;
803 }
804
805 /* current = 1: continue on current pc, otherwise continue at <address> */
806 if (!current)
807 buf_set_u32(pc->value, 0, 32, address);
808
809 uint32_t pc_value = buf_get_u32(pc->value, 0, 32);
810
811 /* the front-end may request us not to handle breakpoints */
812 if (handle_breakpoints) {
813 breakpoint = breakpoint_find(target, pc_value);
814 if (breakpoint)
815 cortex_m_unset_breakpoint(target, breakpoint);
816 }
817
818 armv7m_maybe_skip_bkpt_inst(target, &bkpt_inst_found);
819
820 target->debug_reason = DBG_REASON_SINGLESTEP;
821
822 armv7m_restore_context(target);
823
824 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
825
826 /* if no bkpt instruction is found at pc then we can perform
827 * a normal step, otherwise we have to manually step over the bkpt
828 * instruction - as such simulate a step */
829 if (bkpt_inst_found == false) {
830 /* Automatic ISR masking mode off: Just step over the next instruction */
831 if ((cortex_m->isrmasking_mode != CORTEX_M_ISRMASK_AUTO))
832 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
833 else {
834 /* Process interrupts during stepping in a way they don't interfere
835 * debugging.
836 *
837 * Principle:
838 *
839 * Set a temporary break point at the current pc and let the core run
840 * with interrupts enabled. Pending interrupts get served and we run
841 * into the breakpoint again afterwards. Then we step over the next
842 * instruction with interrupts disabled.
843 *
844 * If the pending interrupts don't complete within time, we leave the
845 * core running. This may happen if the interrupts trigger faster
846 * than the core can process them or the handler doesn't return.
847 *
848 * If no more breakpoints are available we simply do a step with
849 * interrupts enabled.
850 *
851 */
852
853 /* 2012-09-29 ph
854 *
855 * If a break point is already set on the lower half word then a break point on
856 * the upper half word will not break again when the core is restarted. So we
857 * just step over the instruction with interrupts disabled.
858 *
859 * The documentation has no information about this, it was found by observation
860 * on STM32F1 and STM32F2. Proper explanation welcome. STM32F0 dosen't seem to
861 * suffer from this problem.
862 *
863 * To add some confusion: pc_value has bit 0 always set, while the breakpoint
864 * address has it always cleared. The former is done to indicate thumb mode
865 * to gdb.
866 *
867 */
868 if ((pc_value & 0x02) && breakpoint_find(target, pc_value & ~0x03)) {
869 LOG_DEBUG("Stepping over next instruction with interrupts disabled");
870 cortex_m_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
871 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
872 /* Re-enable interrupts */
873 cortex_m_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
874 }
875 else {
876
877 /* Set a temporary break point */
878 if (breakpoint)
879 retval = cortex_m_set_breakpoint(target, breakpoint);
880 else
881 retval = breakpoint_add(target, pc_value, 2, BKPT_TYPE_BY_ADDR(pc_value));
882 bool tmp_bp_set = (retval == ERROR_OK);
883
884 /* No more breakpoints left, just do a step */
885 if (!tmp_bp_set)
886 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
887 else {
888 /* Start the core */
889 LOG_DEBUG("Starting core to serve pending interrupts");
890 int64_t t_start = timeval_ms();
891 cortex_m_write_debug_halt_mask(target, 0, C_HALT | C_STEP);
892
893 /* Wait for pending handlers to complete or timeout */
894 do {
895 retval = mem_ap_read_atomic_u32(swjdp,
896 DCB_DHCSR,
897 &cortex_m->dcb_dhcsr);
898 if (retval != ERROR_OK) {
899 target->state = TARGET_UNKNOWN;
900 return retval;
901 }
902 isr_timed_out = ((timeval_ms() - t_start) > 500);
903 } while (!((cortex_m->dcb_dhcsr & S_HALT) || isr_timed_out));
904
905 /* only remove breakpoint if we created it */
906 if (breakpoint)
907 cortex_m_unset_breakpoint(target, breakpoint);
908 else {
909 /* Remove the temporary breakpoint */
910 breakpoint_remove(target, pc_value);
911 }
912
913 if (isr_timed_out) {
914 LOG_DEBUG("Interrupt handlers didn't complete within time, "
915 "leaving target running");
916 } else {
917 /* Step over next instruction with interrupts disabled */
918 cortex_m_write_debug_halt_mask(target,
919 C_HALT | C_MASKINTS,
920 0);
921 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
922 /* Re-enable interrupts */
923 cortex_m_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
924 }
925 }
926 }
927 }
928 }
929
930 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m->dcb_dhcsr);
931 if (retval != ERROR_OK)
932 return retval;
933
934 /* registers are now invalid */
935 register_cache_invalidate(armv7m->arm.core_cache);
936
937 if (breakpoint)
938 cortex_m_set_breakpoint(target, breakpoint);
939
940 if (isr_timed_out) {
941 /* Leave the core running. The user has to stop execution manually. */
942 target->debug_reason = DBG_REASON_NOTHALTED;
943 target->state = TARGET_RUNNING;
944 return ERROR_OK;
945 }
946
947 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
948 " nvic_icsr = 0x%" PRIx32,
949 cortex_m->dcb_dhcsr, cortex_m->nvic_icsr);
950
951 retval = cortex_m_debug_entry(target);
952 if (retval != ERROR_OK)
953 return retval;
954 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
955
956 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
957 " nvic_icsr = 0x%" PRIx32,
958 cortex_m->dcb_dhcsr, cortex_m->nvic_icsr);
959
960 return ERROR_OK;
961 }
962
963 static int cortex_m_assert_reset(struct target *target)
964 {
965 struct cortex_m_common *cortex_m = target_to_cm(target);
966 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
967 enum cortex_m_soft_reset_config reset_config = cortex_m->soft_reset_config;
968
969 LOG_DEBUG("target->state: %s",
970 target_state_name(target));
971
972 enum reset_types jtag_reset_config = jtag_get_reset_config();
973
974 if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT)) {
975 /* allow scripts to override the reset event */
976
977 target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
978 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
979 target->state = TARGET_RESET;
980
981 return ERROR_OK;
982 }
983
984 /* some cores support connecting while srst is asserted
985 * use that mode is it has been configured */
986
987 bool srst_asserted = false;
988
989 if ((jtag_reset_config & RESET_HAS_SRST) &&
990 (jtag_reset_config & RESET_SRST_NO_GATING)) {
991 adapter_assert_reset();
992 srst_asserted = true;
993 }
994
995 /* Enable debug requests */
996 int retval;
997 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m->dcb_dhcsr);
998 if (retval != ERROR_OK)
999 return retval;
1000 if (!(cortex_m->dcb_dhcsr & C_DEBUGEN)) {
1001 retval = mem_ap_write_u32(swjdp, DCB_DHCSR, DBGKEY | C_DEBUGEN);
1002 if (retval != ERROR_OK)
1003 return retval;
1004 }
1005
1006 /* If the processor is sleeping in a WFI or WFE instruction, the
1007 * C_HALT bit must be asserted to regain control */
1008 if (cortex_m->dcb_dhcsr & S_SLEEP) {
1009 retval = mem_ap_write_u32(swjdp, DCB_DHCSR, DBGKEY | C_HALT | C_DEBUGEN);
1010 if (retval != ERROR_OK)
1011 return retval;
1012 }
1013
1014 retval = mem_ap_write_u32(swjdp, DCB_DCRDR, 0);
1015 if (retval != ERROR_OK)
1016 return retval;
1017
1018 if (!target->reset_halt) {
1019 /* Set/Clear C_MASKINTS in a separate operation */
1020 if (cortex_m->dcb_dhcsr & C_MASKINTS) {
1021 retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
1022 DBGKEY | C_DEBUGEN | C_HALT);
1023 if (retval != ERROR_OK)
1024 return retval;
1025 }
1026
1027 /* clear any debug flags before resuming */
1028 cortex_m_clear_halt(target);
1029
1030 /* clear C_HALT in dhcsr reg */
1031 cortex_m_write_debug_halt_mask(target, 0, C_HALT);
1032 } else {
1033 /* Halt in debug on reset; endreset_event() restores DEMCR.
1034 *
1035 * REVISIT catching BUSERR presumably helps to defend against
1036 * bad vector table entries. Should this include MMERR or
1037 * other flags too?
1038 */
1039 retval = mem_ap_write_atomic_u32(swjdp, DCB_DEMCR,
1040 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
1041 if (retval != ERROR_OK)
1042 return retval;
1043 }
1044
1045 if (jtag_reset_config & RESET_HAS_SRST) {
1046 /* default to asserting srst */
1047 if (!srst_asserted)
1048 adapter_assert_reset();
1049 } else {
1050 /* Use a standard Cortex-M3 software reset mechanism.
1051 * We default to using VECRESET as it is supported on all current cores.
1052 * This has the disadvantage of not resetting the peripherals, so a
1053 * reset-init event handler is needed to perform any peripheral resets.
1054 */
1055 retval = mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR,
1056 AIRCR_VECTKEY | ((reset_config == CORTEX_M_RESET_SYSRESETREQ)
1057 ? AIRCR_SYSRESETREQ : AIRCR_VECTRESET));
1058 if (retval != ERROR_OK)
1059 return retval;
1060
1061 LOG_DEBUG("Using Cortex-M %s", (reset_config == CORTEX_M_RESET_SYSRESETREQ)
1062 ? "SYSRESETREQ" : "VECTRESET");
1063
1064 if (reset_config == CORTEX_M_RESET_VECTRESET) {
1065 LOG_WARNING("Only resetting the Cortex-M core, use a reset-init event "
1066 "handler to reset any peripherals or configure hardware srst support.");
1067 }
1068
1069 /*
1070 SAM4L needs to execute security initalization
1071 startup sequence before AP access would be enabled.
1072 During the intialization CDBGPWRUPACK is pulled low and we
1073 need to wait for it to be set to 1 again.
1074 */
1075 retval = dap_dp_poll_register(swjdp, DP_CTRL_STAT,
1076 CDBGPWRUPACK, CDBGPWRUPACK, 100);
1077 if (retval != ERROR_OK) {
1078 LOG_ERROR("Failed waitnig for CDBGPWRUPACK");
1079 return ERROR_FAIL;
1080 }
1081
1082 {
1083 /* I do not know why this is necessary, but it
1084 * fixes strange effects (step/resume cause NMI
1085 * after reset) on LM3S6918 -- Michael Schwingen
1086 */
1087 uint32_t tmp;
1088 retval = mem_ap_read_atomic_u32(swjdp, NVIC_AIRCR, &tmp);
1089 if (retval != ERROR_OK)
1090 return retval;
1091 }
1092 }
1093
1094 target->state = TARGET_RESET;
1095 jtag_add_sleep(50000);
1096
1097 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
1098
1099 if (target->reset_halt) {
1100 retval = target_halt(target);
1101 if (retval != ERROR_OK)
1102 return retval;
1103 }
1104
1105 return ERROR_OK;
1106 }
1107
1108 static int cortex_m_deassert_reset(struct target *target)
1109 {
1110 LOG_DEBUG("target->state: %s",
1111 target_state_name(target));
1112
1113 /* deassert reset lines */
1114 adapter_deassert_reset();
1115
1116 return ERROR_OK;
1117 }
1118
1119 int cortex_m_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
1120 {
1121 int retval;
1122 int fp_num = 0;
1123 uint32_t hilo;
1124 struct cortex_m_common *cortex_m = target_to_cm(target);
1125 struct cortex_m_fp_comparator *comparator_list = cortex_m->fp_comparator_list;
1126
1127 if (breakpoint->set) {
1128 LOG_WARNING("breakpoint (BPID: %" PRIu32 ") already set", breakpoint->unique_id);
1129 return ERROR_OK;
1130 }
1131
1132 if (cortex_m->auto_bp_type)
1133 breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
1134
1135 if (breakpoint->type == BKPT_HARD) {
1136 while (comparator_list[fp_num].used && (fp_num < cortex_m->fp_num_code))
1137 fp_num++;
1138 if (fp_num >= cortex_m->fp_num_code) {
1139 LOG_ERROR("Can not find free FPB Comparator!");
1140 return ERROR_FAIL;
1141 }
1142 breakpoint->set = fp_num + 1;
1143 hilo = (breakpoint->address & 0x2) ? FPCR_REPLACE_BKPT_HIGH : FPCR_REPLACE_BKPT_LOW;
1144 comparator_list[fp_num].used = 1;
1145 comparator_list[fp_num].fpcr_value = (breakpoint->address & 0x1FFFFFFC) | hilo | 1;
1146 target_write_u32(target, comparator_list[fp_num].fpcr_address,
1147 comparator_list[fp_num].fpcr_value);
1148 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32 "",
1149 fp_num,
1150 comparator_list[fp_num].fpcr_value);
1151 if (!cortex_m->fpb_enabled) {
1152 LOG_DEBUG("FPB wasn't enabled, do it now");
1153 retval = cortex_m_enable_fpb(target);
1154 if (retval != ERROR_OK) {
1155 LOG_ERROR("Failed to enable the FPB");
1156 return retval;
1157 }
1158
1159 cortex_m->fpb_enabled = 1;
1160 }
1161 } else if (breakpoint->type == BKPT_SOFT) {
1162 uint8_t code[4];
1163
1164 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
1165 * semihosting; don't use that. Otherwise the BKPT
1166 * parameter is arbitrary.
1167 */
1168 buf_set_u32(code, 0, 32, ARMV5_T_BKPT(0x11));
1169 retval = target_read_memory(target,
1170 breakpoint->address & 0xFFFFFFFE,
1171 breakpoint->length, 1,
1172 breakpoint->orig_instr);
1173 if (retval != ERROR_OK)
1174 return retval;
1175 retval = target_write_memory(target,
1176 breakpoint->address & 0xFFFFFFFE,
1177 breakpoint->length, 1,
1178 code);
1179 if (retval != ERROR_OK)
1180 return retval;
1181 breakpoint->set = true;
1182 }
1183
1184 LOG_DEBUG("BPID: %" PRIu32 ", Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
1185 breakpoint->unique_id,
1186 (int)(breakpoint->type),
1187 breakpoint->address,
1188 breakpoint->length,
1189 breakpoint->set);
1190
1191 return ERROR_OK;
1192 }
1193
1194 int cortex_m_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
1195 {
1196 int retval;
1197 struct cortex_m_common *cortex_m = target_to_cm(target);
1198 struct cortex_m_fp_comparator *comparator_list = cortex_m->fp_comparator_list;
1199
1200 if (!breakpoint->set) {
1201 LOG_WARNING("breakpoint not set");
1202 return ERROR_OK;
1203 }
1204
1205 LOG_DEBUG("BPID: %" PRIu32 ", Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
1206 breakpoint->unique_id,
1207 (int)(breakpoint->type),
1208 breakpoint->address,
1209 breakpoint->length,
1210 breakpoint->set);
1211
1212 if (breakpoint->type == BKPT_HARD) {
1213 int fp_num = breakpoint->set - 1;
1214 if ((fp_num < 0) || (fp_num >= cortex_m->fp_num_code)) {
1215 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1216 return ERROR_OK;
1217 }
1218 comparator_list[fp_num].used = 0;
1219 comparator_list[fp_num].fpcr_value = 0;
1220 target_write_u32(target, comparator_list[fp_num].fpcr_address,
1221 comparator_list[fp_num].fpcr_value);
1222 } else {
1223 /* restore original instruction (kept in target endianness) */
1224 if (breakpoint->length == 4) {
1225 retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 4, 1,
1226 breakpoint->orig_instr);
1227 if (retval != ERROR_OK)
1228 return retval;
1229 } else {
1230 retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 2, 1,
1231 breakpoint->orig_instr);
1232 if (retval != ERROR_OK)
1233 return retval;
1234 }
1235 }
1236 breakpoint->set = false;
1237
1238 return ERROR_OK;
1239 }
1240
1241 int cortex_m_add_breakpoint(struct target *target, struct breakpoint *breakpoint)
1242 {
1243 struct cortex_m_common *cortex_m = target_to_cm(target);
1244
1245 if (cortex_m->auto_bp_type)
1246 breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
1247
1248 if (breakpoint->type != BKPT_TYPE_BY_ADDR(breakpoint->address)) {
1249 if (breakpoint->type == BKPT_HARD) {
1250 LOG_INFO("flash patch comparator requested outside code memory region");
1251 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1252 }
1253
1254 if (breakpoint->type == BKPT_SOFT) {
1255 LOG_INFO("soft breakpoint requested in code (flash) memory region");
1256 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1257 }
1258 }
1259
1260 if ((breakpoint->type == BKPT_HARD) && (cortex_m->fp_code_available < 1)) {
1261 LOG_INFO("no flash patch comparator unit available for hardware breakpoint");
1262 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1263 }
1264
1265 if (breakpoint->length == 3) {
1266 LOG_DEBUG("Using a two byte breakpoint for 32bit Thumb-2 request");
1267 breakpoint->length = 2;
1268 }
1269
1270 if ((breakpoint->length != 2)) {
1271 LOG_INFO("only breakpoints of two bytes length supported");
1272 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1273 }
1274
1275 if (breakpoint->type == BKPT_HARD)
1276 cortex_m->fp_code_available--;
1277
1278 return cortex_m_set_breakpoint(target, breakpoint);
1279 }
1280
1281 int cortex_m_remove_breakpoint(struct target *target, struct breakpoint *breakpoint)
1282 {
1283 struct cortex_m_common *cortex_m = target_to_cm(target);
1284
1285 /* REVISIT why check? FBP can be updated with core running ... */
1286 if (target->state != TARGET_HALTED) {
1287 LOG_WARNING("target not halted");
1288 return ERROR_TARGET_NOT_HALTED;
1289 }
1290
1291 if (cortex_m->auto_bp_type)
1292 breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
1293
1294 if (breakpoint->set)
1295 cortex_m_unset_breakpoint(target, breakpoint);
1296
1297 if (breakpoint->type == BKPT_HARD)
1298 cortex_m->fp_code_available++;
1299
1300 return ERROR_OK;
1301 }
1302
1303 int cortex_m_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
1304 {
1305 int dwt_num = 0;
1306 uint32_t mask, temp;
1307 struct cortex_m_common *cortex_m = target_to_cm(target);
1308
1309 /* watchpoint params were validated earlier */
1310 mask = 0;
1311 temp = watchpoint->length;
1312 while (temp) {
1313 temp >>= 1;
1314 mask++;
1315 }
1316 mask--;
1317
1318 /* REVISIT Don't fully trust these "not used" records ... users
1319 * may set up breakpoints by hand, e.g. dual-address data value
1320 * watchpoint using comparator #1; comparator #0 matching cycle
1321 * count; send data trace info through ITM and TPIU; etc
1322 */
1323 struct cortex_m_dwt_comparator *comparator;
1324
1325 for (comparator = cortex_m->dwt_comparator_list;
1326 comparator->used && dwt_num < cortex_m->dwt_num_comp;
1327 comparator++, dwt_num++)
1328 continue;
1329 if (dwt_num >= cortex_m->dwt_num_comp) {
1330 LOG_ERROR("Can not find free DWT Comparator");
1331 return ERROR_FAIL;
1332 }
1333 comparator->used = 1;
1334 watchpoint->set = dwt_num + 1;
1335
1336 comparator->comp = watchpoint->address;
1337 target_write_u32(target, comparator->dwt_comparator_address + 0,
1338 comparator->comp);
1339
1340 comparator->mask = mask;
1341 target_write_u32(target, comparator->dwt_comparator_address + 4,
1342 comparator->mask);
1343
1344 switch (watchpoint->rw) {
1345 case WPT_READ:
1346 comparator->function = 5;
1347 break;
1348 case WPT_WRITE:
1349 comparator->function = 6;
1350 break;
1351 case WPT_ACCESS:
1352 comparator->function = 7;
1353 break;
1354 }
1355 target_write_u32(target, comparator->dwt_comparator_address + 8,
1356 comparator->function);
1357
1358 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1359 watchpoint->unique_id, dwt_num,
1360 (unsigned) comparator->comp,
1361 (unsigned) comparator->mask,
1362 (unsigned) comparator->function);
1363 return ERROR_OK;
1364 }
1365
1366 int cortex_m_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
1367 {
1368 struct cortex_m_common *cortex_m = target_to_cm(target);
1369 struct cortex_m_dwt_comparator *comparator;
1370 int dwt_num;
1371
1372 if (!watchpoint->set) {
1373 LOG_WARNING("watchpoint (wpid: %d) not set",
1374 watchpoint->unique_id);
1375 return ERROR_OK;
1376 }
1377
1378 dwt_num = watchpoint->set - 1;
1379
1380 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1381 watchpoint->unique_id, dwt_num,
1382 (unsigned) watchpoint->address);
1383
1384 if ((dwt_num < 0) || (dwt_num >= cortex_m->dwt_num_comp)) {
1385 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1386 return ERROR_OK;
1387 }
1388
1389 comparator = cortex_m->dwt_comparator_list + dwt_num;
1390 comparator->used = 0;
1391 comparator->function = 0;
1392 target_write_u32(target, comparator->dwt_comparator_address + 8,
1393 comparator->function);
1394
1395 watchpoint->set = false;
1396
1397 return ERROR_OK;
1398 }
1399
1400 int cortex_m_add_watchpoint(struct target *target, struct watchpoint *watchpoint)
1401 {
1402 struct cortex_m_common *cortex_m = target_to_cm(target);
1403
1404 if (cortex_m->dwt_comp_available < 1) {
1405 LOG_DEBUG("no comparators?");
1406 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1407 }
1408
1409 /* hardware doesn't support data value masking */
1410 if (watchpoint->mask != ~(uint32_t)0) {
1411 LOG_DEBUG("watchpoint value masks not supported");
1412 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1413 }
1414
1415 /* hardware allows address masks of up to 32K */
1416 unsigned mask;
1417
1418 for (mask = 0; mask < 16; mask++) {
1419 if ((1u << mask) == watchpoint->length)
1420 break;
1421 }
1422 if (mask == 16) {
1423 LOG_DEBUG("unsupported watchpoint length");
1424 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1425 }
1426 if (watchpoint->address & ((1 << mask) - 1)) {
1427 LOG_DEBUG("watchpoint address is unaligned");
1428 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1429 }
1430
1431 /* Caller doesn't seem to be able to describe watching for data
1432 * values of zero; that flags "no value".
1433 *
1434 * REVISIT This DWT may well be able to watch for specific data
1435 * values. Requires comparator #1 to set DATAVMATCH and match
1436 * the data, and another comparator (DATAVADDR0) matching addr.
1437 */
1438 if (watchpoint->value) {
1439 LOG_DEBUG("data value watchpoint not YET supported");
1440 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1441 }
1442
1443 cortex_m->dwt_comp_available--;
1444 LOG_DEBUG("dwt_comp_available: %d", cortex_m->dwt_comp_available);
1445
1446 return ERROR_OK;
1447 }
1448
1449 int cortex_m_remove_watchpoint(struct target *target, struct watchpoint *watchpoint)
1450 {
1451 struct cortex_m_common *cortex_m = target_to_cm(target);
1452
1453 /* REVISIT why check? DWT can be updated with core running ... */
1454 if (target->state != TARGET_HALTED) {
1455 LOG_WARNING("target not halted");
1456 return ERROR_TARGET_NOT_HALTED;
1457 }
1458
1459 if (watchpoint->set)
1460 cortex_m_unset_watchpoint(target, watchpoint);
1461
1462 cortex_m->dwt_comp_available++;
1463 LOG_DEBUG("dwt_comp_available: %d", cortex_m->dwt_comp_available);
1464
1465 return ERROR_OK;
1466 }
1467
1468 void cortex_m_enable_watchpoints(struct target *target)
1469 {
1470 struct watchpoint *watchpoint = target->watchpoints;
1471
1472 /* set any pending watchpoints */
1473 while (watchpoint) {
1474 if (!watchpoint->set)
1475 cortex_m_set_watchpoint(target, watchpoint);
1476 watchpoint = watchpoint->next;
1477 }
1478 }
1479
1480 static int cortex_m_load_core_reg_u32(struct target *target,
1481 uint32_t num, uint32_t *value)
1482 {
1483 int retval;
1484
1485 /* NOTE: we "know" here that the register identifiers used
1486 * in the v7m header match the Cortex-M3 Debug Core Register
1487 * Selector values for R0..R15, xPSR, MSP, and PSP.
1488 */
1489 switch (num) {
1490 case 0 ... 18:
1491 /* read a normal core register */
1492 retval = cortexm_dap_read_coreregister_u32(target, value, num);
1493
1494 if (retval != ERROR_OK) {
1495 LOG_ERROR("JTAG failure %i", retval);
1496 return ERROR_JTAG_DEVICE_ERROR;
1497 }
1498 LOG_DEBUG("load from core reg %i value 0x%" PRIx32 "", (int)num, *value);
1499 break;
1500
1501 case ARMV7M_PRIMASK:
1502 case ARMV7M_BASEPRI:
1503 case ARMV7M_FAULTMASK:
1504 case ARMV7M_CONTROL:
1505 /* Cortex-M3 packages these four registers as bitfields
1506 * in one Debug Core register. So say r0 and r2 docs;
1507 * it was removed from r1 docs, but still works.
1508 */
1509 cortexm_dap_read_coreregister_u32(target, value, 20);
1510
1511 switch (num) {
1512 case ARMV7M_PRIMASK:
1513 *value = buf_get_u32((uint8_t *)value, 0, 1);
1514 break;
1515
1516 case ARMV7M_BASEPRI:
1517 *value = buf_get_u32((uint8_t *)value, 8, 8);
1518 break;
1519
1520 case ARMV7M_FAULTMASK:
1521 *value = buf_get_u32((uint8_t *)value, 16, 1);
1522 break;
1523
1524 case ARMV7M_CONTROL:
1525 *value = buf_get_u32((uint8_t *)value, 24, 2);
1526 break;
1527 }
1528
1529 LOG_DEBUG("load from special reg %i value 0x%" PRIx32 "", (int)num, *value);
1530 break;
1531
1532 default:
1533 return ERROR_COMMAND_SYNTAX_ERROR;
1534 }
1535
1536 return ERROR_OK;
1537 }
1538
1539 static int cortex_m_store_core_reg_u32(struct target *target,
1540 uint32_t num, uint32_t value)
1541 {
1542 int retval;
1543 uint32_t reg;
1544 struct armv7m_common *armv7m = target_to_armv7m(target);
1545
1546 /* NOTE: we "know" here that the register identifiers used
1547 * in the v7m header match the Cortex-M3 Debug Core Register
1548 * Selector values for R0..R15, xPSR, MSP, and PSP.
1549 */
1550 switch (num) {
1551 case 0 ... 18:
1552 retval = cortexm_dap_write_coreregister_u32(target, value, num);
1553 if (retval != ERROR_OK) {
1554 struct reg *r;
1555
1556 LOG_ERROR("JTAG failure");
1557 r = armv7m->arm.core_cache->reg_list + num;
1558 r->dirty = r->valid;
1559 return ERROR_JTAG_DEVICE_ERROR;
1560 }
1561 LOG_DEBUG("write core reg %i value 0x%" PRIx32 "", (int)num, value);
1562 break;
1563
1564 case ARMV7M_PRIMASK:
1565 case ARMV7M_BASEPRI:
1566 case ARMV7M_FAULTMASK:
1567 case ARMV7M_CONTROL:
1568 /* Cortex-M3 packages these four registers as bitfields
1569 * in one Debug Core register. So say r0 and r2 docs;
1570 * it was removed from r1 docs, but still works.
1571 */
1572 cortexm_dap_read_coreregister_u32(target, &reg, 20);
1573
1574 switch (num) {
1575 case ARMV7M_PRIMASK:
1576 buf_set_u32((uint8_t *)&reg, 0, 1, value);
1577 break;
1578
1579 case ARMV7M_BASEPRI:
1580 buf_set_u32((uint8_t *)&reg, 8, 8, value);
1581 break;
1582
1583 case ARMV7M_FAULTMASK:
1584 buf_set_u32((uint8_t *)&reg, 16, 1, value);
1585 break;
1586
1587 case ARMV7M_CONTROL:
1588 buf_set_u32((uint8_t *)&reg, 24, 2, value);
1589 break;
1590 }
1591
1592 cortexm_dap_write_coreregister_u32(target, reg, 20);
1593
1594 LOG_DEBUG("write special reg %i value 0x%" PRIx32 " ", (int)num, value);
1595 break;
1596
1597 default:
1598 return ERROR_COMMAND_SYNTAX_ERROR;
1599 }
1600
1601 return ERROR_OK;
1602 }
1603
1604 static int cortex_m_read_memory(struct target *target, uint32_t address,
1605 uint32_t size, uint32_t count, uint8_t *buffer)
1606 {
1607 struct armv7m_common *armv7m = target_to_armv7m(target);
1608 struct adiv5_dap *swjdp = armv7m->arm.dap;
1609
1610 if (armv7m->arm.is_armv6m) {
1611 /* armv6m does not handle unaligned memory access */
1612 if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
1613 return ERROR_TARGET_UNALIGNED_ACCESS;
1614 }
1615
1616 return mem_ap_read(swjdp, buffer, size, count, address, true);
1617 }
1618
1619 static int cortex_m_write_memory(struct target *target, uint32_t address,
1620 uint32_t size, uint32_t count, const uint8_t *buffer)
1621 {
1622 struct armv7m_common *armv7m = target_to_armv7m(target);
1623 struct adiv5_dap *swjdp = armv7m->arm.dap;
1624
1625 if (armv7m->arm.is_armv6m) {
1626 /* armv6m does not handle unaligned memory access */
1627 if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
1628 return ERROR_TARGET_UNALIGNED_ACCESS;
1629 }
1630
1631 return mem_ap_write(swjdp, buffer, size, count, address, true);
1632 }
1633
1634 static int cortex_m_init_target(struct command_context *cmd_ctx,
1635 struct target *target)
1636 {
1637 armv7m_build_reg_cache(target);
1638 return ERROR_OK;
1639 }
1640
1641 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1642 * on r/w if the core is not running, and clear on resume or reset ... or
1643 * at least, in a post_restore_context() method.
1644 */
1645
1646 struct dwt_reg_state {
1647 struct target *target;
1648 uint32_t addr;
1649 uint32_t value; /* scratch/cache */
1650 };
1651
1652 static int cortex_m_dwt_get_reg(struct reg *reg)
1653 {
1654 struct dwt_reg_state *state = reg->arch_info;
1655
1656 return target_read_u32(state->target, state->addr, &state->value);
1657 }
1658
1659 static int cortex_m_dwt_set_reg(struct reg *reg, uint8_t *buf)
1660 {
1661 struct dwt_reg_state *state = reg->arch_info;
1662
1663 return target_write_u32(state->target, state->addr,
1664 buf_get_u32(buf, 0, reg->size));
1665 }
1666
1667 struct dwt_reg {
1668 uint32_t addr;
1669 char *name;
1670 unsigned size;
1671 };
1672
1673 static struct dwt_reg dwt_base_regs[] = {
1674 { DWT_CTRL, "dwt_ctrl", 32, },
1675 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1676 * increments while the core is asleep.
1677 */
1678 { DWT_CYCCNT, "dwt_cyccnt", 32, },
1679 /* plus some 8 bit counters, useful for profiling with TPIU */
1680 };
1681
1682 static struct dwt_reg dwt_comp[] = {
1683 #define DWT_COMPARATOR(i) \
1684 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1685 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1686 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1687 DWT_COMPARATOR(0),
1688 DWT_COMPARATOR(1),
1689 DWT_COMPARATOR(2),
1690 DWT_COMPARATOR(3),
1691 #undef DWT_COMPARATOR
1692 };
1693
1694 static const struct reg_arch_type dwt_reg_type = {
1695 .get = cortex_m_dwt_get_reg,
1696 .set = cortex_m_dwt_set_reg,
1697 };
1698
1699 static void cortex_m_dwt_addreg(struct target *t, struct reg *r, struct dwt_reg *d)
1700 {
1701 struct dwt_reg_state *state;
1702
1703 state = calloc(1, sizeof *state);
1704 if (!state)
1705 return;
1706 state->addr = d->addr;
1707 state->target = t;
1708
1709 r->name = d->name;
1710 r->size = d->size;
1711 r->value = &state->value;
1712 r->arch_info = state;
1713 r->type = &dwt_reg_type;
1714 }
1715
1716 void cortex_m_dwt_setup(struct cortex_m_common *cm, struct target *target)
1717 {
1718 uint32_t dwtcr;
1719 struct reg_cache *cache;
1720 struct cortex_m_dwt_comparator *comparator;
1721 int reg, i;
1722
1723 target_read_u32(target, DWT_CTRL, &dwtcr);
1724 if (!dwtcr) {
1725 LOG_DEBUG("no DWT");
1726 return;
1727 }
1728
1729 cm->dwt_num_comp = (dwtcr >> 28) & 0xF;
1730 cm->dwt_comp_available = cm->dwt_num_comp;
1731 cm->dwt_comparator_list = calloc(cm->dwt_num_comp,
1732 sizeof(struct cortex_m_dwt_comparator));
1733 if (!cm->dwt_comparator_list) {
1734 fail0:
1735 cm->dwt_num_comp = 0;
1736 LOG_ERROR("out of mem");
1737 return;
1738 }
1739
1740 cache = calloc(1, sizeof *cache);
1741 if (!cache) {
1742 fail1:
1743 free(cm->dwt_comparator_list);
1744 goto fail0;
1745 }
1746 cache->name = "Cortex-M DWT registers";
1747 cache->num_regs = 2 + cm->dwt_num_comp * 3;
1748 cache->reg_list = calloc(cache->num_regs, sizeof *cache->reg_list);
1749 if (!cache->reg_list) {
1750 free(cache);
1751 goto fail1;
1752 }
1753
1754 for (reg = 0; reg < 2; reg++)
1755 cortex_m_dwt_addreg(target, cache->reg_list + reg,
1756 dwt_base_regs + reg);
1757
1758 comparator = cm->dwt_comparator_list;
1759 for (i = 0; i < cm->dwt_num_comp; i++, comparator++) {
1760 int j;
1761
1762 comparator->dwt_comparator_address = DWT_COMP0 + 0x10 * i;
1763 for (j = 0; j < 3; j++, reg++)
1764 cortex_m_dwt_addreg(target, cache->reg_list + reg,
1765 dwt_comp + 3 * i + j);
1766
1767 /* make sure we clear any watchpoints enabled on the target */
1768 target_write_u32(target, comparator->dwt_comparator_address + 8, 0);
1769 }
1770
1771 *register_get_last_cache_p(&target->reg_cache) = cache;
1772 cm->dwt_cache = cache;
1773
1774 LOG_DEBUG("DWT dwtcr 0x%" PRIx32 ", comp %d, watch%s",
1775 dwtcr, cm->dwt_num_comp,
1776 (dwtcr & (0xf << 24)) ? " only" : "/trigger");
1777
1778 /* REVISIT: if num_comp > 1, check whether comparator #1 can
1779 * implement single-address data value watchpoints ... so we
1780 * won't need to check it later, when asked to set one up.
1781 */
1782 }
1783
1784 #define MVFR0 0xe000ef40
1785 #define MVFR1 0xe000ef44
1786
1787 #define MVFR0_DEFAULT_M4 0x10110021
1788 #define MVFR1_DEFAULT_M4 0x11000011
1789
1790 int cortex_m_examine(struct target *target)
1791 {
1792 int retval;
1793 uint32_t cpuid, fpcr, mvfr0, mvfr1;
1794 int i;
1795 struct cortex_m_common *cortex_m = target_to_cm(target);
1796 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
1797 struct armv7m_common *armv7m = target_to_armv7m(target);
1798
1799 /* stlink shares the examine handler but does not support
1800 * all its calls */
1801 if (!armv7m->stlink) {
1802 retval = ahbap_debugport_init(swjdp);
1803 if (retval != ERROR_OK)
1804 return retval;
1805 }
1806
1807 if (!target_was_examined(target)) {
1808 target_set_examined(target);
1809
1810 /* Read from Device Identification Registers */
1811 retval = target_read_u32(target, CPUID, &cpuid);
1812 if (retval != ERROR_OK)
1813 return retval;
1814
1815 /* Get CPU Type */
1816 i = (cpuid >> 4) & 0xf;
1817
1818 LOG_DEBUG("Cortex-M%d r%" PRId8 "p%" PRId8 " processor detected",
1819 i, (uint8_t)((cpuid >> 20) & 0xf), (uint8_t)((cpuid >> 0) & 0xf));
1820 LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
1821
1822 /* test for floating point feature on cortex-m4 */
1823 if (i == 4) {
1824 target_read_u32(target, MVFR0, &mvfr0);
1825 target_read_u32(target, MVFR1, &mvfr1);
1826
1827 if ((mvfr0 == MVFR0_DEFAULT_M4) && (mvfr1 == MVFR1_DEFAULT_M4)) {
1828 LOG_DEBUG("Cortex-M%d floating point feature FPv4_SP found", i);
1829 armv7m->fp_feature = FPv4_SP;
1830 }
1831 } else if (i == 0) {
1832 /* Cortex-M0 does not support unaligned memory access */
1833 armv7m->arm.is_armv6m = true;
1834 }
1835
1836 if (i == 4 || i == 3) {
1837 /* Cortex-M3/M4 has 4096 bytes autoincrement range */
1838 armv7m->dap.tar_autoincr_block = (1 << 12);
1839 }
1840
1841 /* NOTE: FPB and DWT are both optional. */
1842
1843 /* Setup FPB */
1844 target_read_u32(target, FP_CTRL, &fpcr);
1845 cortex_m->auto_bp_type = 1;
1846 /* bits [14:12] and [7:4] */
1847 cortex_m->fp_num_code = ((fpcr >> 8) & 0x70) | ((fpcr >> 4) & 0xF);
1848 cortex_m->fp_num_lit = (fpcr >> 8) & 0xF;
1849 cortex_m->fp_code_available = cortex_m->fp_num_code;
1850 cortex_m->fp_comparator_list = calloc(
1851 cortex_m->fp_num_code + cortex_m->fp_num_lit,
1852 sizeof(struct cortex_m_fp_comparator));
1853 cortex_m->fpb_enabled = fpcr & 1;
1854 for (i = 0; i < cortex_m->fp_num_code + cortex_m->fp_num_lit; i++) {
1855 cortex_m->fp_comparator_list[i].type =
1856 (i < cortex_m->fp_num_code) ? FPCR_CODE : FPCR_LITERAL;
1857 cortex_m->fp_comparator_list[i].fpcr_address = FP_COMP0 + 4 * i;
1858
1859 /* make sure we clear any breakpoints enabled on the target */
1860 target_write_u32(target, cortex_m->fp_comparator_list[i].fpcr_address, 0);
1861 }
1862 LOG_DEBUG("FPB fpcr 0x%" PRIx32 ", numcode %i, numlit %i",
1863 fpcr,
1864 cortex_m->fp_num_code,
1865 cortex_m->fp_num_lit);
1866
1867 /* Setup DWT */
1868 cortex_m_dwt_setup(cortex_m, target);
1869
1870 /* These hardware breakpoints only work for code in flash! */
1871 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
1872 target_name(target),
1873 cortex_m->fp_num_code,
1874 cortex_m->dwt_num_comp);
1875 }
1876
1877 return ERROR_OK;
1878 }
1879
1880 static int cortex_m_dcc_read(struct target *target, uint8_t *value, uint8_t *ctrl)
1881 {
1882 struct armv7m_common *armv7m = target_to_armv7m(target);
1883 struct adiv5_dap *swjdp = armv7m->arm.dap;
1884 uint16_t dcrdr;
1885 uint8_t buf[2];
1886 int retval;
1887
1888 retval = mem_ap_read(swjdp, buf, 2, 1, DCB_DCRDR, false);
1889 if (retval != ERROR_OK)
1890 return retval;
1891
1892 dcrdr = target_buffer_get_u16(target, buf);
1893 *ctrl = (uint8_t)dcrdr;
1894 *value = (uint8_t)(dcrdr >> 8);
1895
1896 LOG_DEBUG("data 0x%x ctrl 0x%x", *value, *ctrl);
1897
1898 /* write ack back to software dcc register
1899 * signify we have read data */
1900 if (dcrdr & (1 << 0)) {
1901 target_buffer_set_u16(target, buf, 0);
1902 retval = mem_ap_write(swjdp, buf, 2, 1, DCB_DCRDR, false);
1903 if (retval != ERROR_OK)
1904 return retval;
1905 }
1906
1907 return ERROR_OK;
1908 }
1909
1910 static int cortex_m_target_request_data(struct target *target,
1911 uint32_t size, uint8_t *buffer)
1912 {
1913 uint8_t data;
1914 uint8_t ctrl;
1915 uint32_t i;
1916
1917 for (i = 0; i < (size * 4); i++) {
1918 int retval = cortex_m_dcc_read(target, &data, &ctrl);
1919 if (retval != ERROR_OK)
1920 return retval;
1921 buffer[i] = data;
1922 }
1923
1924 return ERROR_OK;
1925 }
1926
1927 static int cortex_m_handle_target_request(void *priv)
1928 {
1929 struct target *target = priv;
1930 if (!target_was_examined(target))
1931 return ERROR_OK;
1932
1933 if (!target->dbg_msg_enabled)
1934 return ERROR_OK;
1935
1936 if (target->state == TARGET_RUNNING) {
1937 uint8_t data;
1938 uint8_t ctrl;
1939 int retval;
1940
1941 retval = cortex_m_dcc_read(target, &data, &ctrl);
1942 if (retval != ERROR_OK)
1943 return retval;
1944
1945 /* check if we have data */
1946 if (ctrl & (1 << 0)) {
1947 uint32_t request;
1948
1949 /* we assume target is quick enough */
1950 request = data;
1951 for (int i = 1; i <= 3; i++) {
1952 retval = cortex_m_dcc_read(target, &data, &ctrl);
1953 if (retval != ERROR_OK)
1954 return retval;
1955 request |= ((uint32_t)data << (i * 8));
1956 }
1957 target_request(target, request);
1958 }
1959 }
1960
1961 return ERROR_OK;
1962 }
1963
1964 static int cortex_m_init_arch_info(struct target *target,
1965 struct cortex_m_common *cortex_m, struct jtag_tap *tap)
1966 {
1967 int retval;
1968 struct armv7m_common *armv7m = &cortex_m->armv7m;
1969
1970 armv7m_init_arch_info(target, armv7m);
1971
1972 /* prepare JTAG information for the new target */
1973 cortex_m->jtag_info.tap = tap;
1974 cortex_m->jtag_info.scann_size = 4;
1975
1976 /* default reset mode is to use srst if fitted
1977 * if not it will use CORTEX_M3_RESET_VECTRESET */
1978 cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET;
1979
1980 armv7m->arm.dap = &armv7m->dap;
1981
1982 /* Leave (only) generic DAP stuff for debugport_init(); */
1983 armv7m->dap.jtag_info = &cortex_m->jtag_info;
1984 armv7m->dap.memaccess_tck = 8;
1985
1986 /* Cortex-M3/M4 has 4096 bytes autoincrement range
1987 * but set a safe default to 1024 to support Cortex-M0
1988 * this will be changed in cortex_m3_examine if a M3/M4 is detected */
1989 armv7m->dap.tar_autoincr_block = (1 << 10);
1990
1991 /* register arch-specific functions */
1992 armv7m->examine_debug_reason = cortex_m_examine_debug_reason;
1993
1994 armv7m->post_debug_entry = NULL;
1995
1996 armv7m->pre_restore_context = NULL;
1997
1998 armv7m->load_core_reg_u32 = cortex_m_load_core_reg_u32;
1999 armv7m->store_core_reg_u32 = cortex_m_store_core_reg_u32;
2000
2001 target_register_timer_callback(cortex_m_handle_target_request, 1, 1, target);
2002
2003 retval = arm_jtag_setup_connection(&cortex_m->jtag_info);
2004 if (retval != ERROR_OK)
2005 return retval;
2006
2007 return ERROR_OK;
2008 }
2009
2010 static int cortex_m_target_create(struct target *target, Jim_Interp *interp)
2011 {
2012 struct cortex_m_common *cortex_m = calloc(1, sizeof(struct cortex_m_common));
2013
2014 cortex_m->common_magic = CORTEX_M_COMMON_MAGIC;
2015 cortex_m_init_arch_info(target, cortex_m, target->tap);
2016
2017 return ERROR_OK;
2018 }
2019
2020 /*--------------------------------------------------------------------------*/
2021
2022 static int cortex_m_verify_pointer(struct command_context *cmd_ctx,
2023 struct cortex_m_common *cm)
2024 {
2025 if (cm->common_magic != CORTEX_M_COMMON_MAGIC) {
2026 command_print(cmd_ctx, "target is not a Cortex-M");
2027 return ERROR_TARGET_INVALID;
2028 }
2029 return ERROR_OK;
2030 }
2031
2032 /*
2033 * Only stuff below this line should need to verify that its target
2034 * is a Cortex-M3. Everything else should have indirected through the
2035 * cortexm3_target structure, which is only used with CM3 targets.
2036 */
2037
2038 static const struct {
2039 char name[10];
2040 unsigned mask;
2041 } vec_ids[] = {
2042 { "hard_err", VC_HARDERR, },
2043 { "int_err", VC_INTERR, },
2044 { "bus_err", VC_BUSERR, },
2045 { "state_err", VC_STATERR, },
2046 { "chk_err", VC_CHKERR, },
2047 { "nocp_err", VC_NOCPERR, },
2048 { "mm_err", VC_MMERR, },
2049 { "reset", VC_CORERESET, },
2050 };
2051
2052 COMMAND_HANDLER(handle_cortex_m_vector_catch_command)
2053 {
2054 struct target *target = get_current_target(CMD_CTX);
2055 struct cortex_m_common *cortex_m = target_to_cm(target);
2056 struct armv7m_common *armv7m = &cortex_m->armv7m;
2057 struct adiv5_dap *swjdp = armv7m->arm.dap;
2058 uint32_t demcr = 0;
2059 int retval;
2060
2061 retval = cortex_m_verify_pointer(CMD_CTX, cortex_m);
2062 if (retval != ERROR_OK)
2063 return retval;
2064
2065 retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &demcr);
2066 if (retval != ERROR_OK)
2067 return retval;
2068
2069 if (CMD_ARGC > 0) {
2070 unsigned catch = 0;
2071
2072 if (CMD_ARGC == 1) {
2073 if (strcmp(CMD_ARGV[0], "all") == 0) {
2074 catch = VC_HARDERR | VC_INTERR | VC_BUSERR
2075 | VC_STATERR | VC_CHKERR | VC_NOCPERR
2076 | VC_MMERR | VC_CORERESET;
2077 goto write;
2078 } else if (strcmp(CMD_ARGV[0], "none") == 0)
2079 goto write;
2080 }
2081 while (CMD_ARGC-- > 0) {
2082 unsigned i;
2083 for (i = 0; i < ARRAY_SIZE(vec_ids); i++) {
2084 if (strcmp(CMD_ARGV[CMD_ARGC], vec_ids[i].name) != 0)
2085 continue;
2086 catch |= vec_ids[i].mask;
2087 break;
2088 }
2089 if (i == ARRAY_SIZE(vec_ids)) {
2090 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV[CMD_ARGC]);
2091 return ERROR_COMMAND_SYNTAX_ERROR;
2092 }
2093 }
2094 write:
2095 /* For now, armv7m->demcr only stores vector catch flags. */
2096 armv7m->demcr = catch;
2097
2098 demcr &= ~0xffff;
2099 demcr |= catch;
2100
2101 /* write, but don't assume it stuck (why not??) */
2102 retval = mem_ap_write_u32(swjdp, DCB_DEMCR, demcr);
2103 if (retval != ERROR_OK)
2104 return retval;
2105 retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &demcr);
2106 if (retval != ERROR_OK)
2107 return retval;
2108
2109 /* FIXME be sure to clear DEMCR on clean server shutdown.
2110 * Otherwise the vector catch hardware could fire when there's
2111 * no debugger hooked up, causing much confusion...
2112 */
2113 }
2114
2115 for (unsigned i = 0; i < ARRAY_SIZE(vec_ids); i++) {
2116 command_print(CMD_CTX, "%9s: %s", vec_ids[i].name,
2117 (demcr & vec_ids[i].mask) ? "catch" : "ignore");
2118 }
2119
2120 return ERROR_OK;
2121 }
2122
2123 COMMAND_HANDLER(handle_cortex_m_mask_interrupts_command)
2124 {
2125 struct target *target = get_current_target(CMD_CTX);
2126 struct cortex_m_common *cortex_m = target_to_cm(target);
2127 int retval;
2128
2129 static const Jim_Nvp nvp_maskisr_modes[] = {
2130 { .name = "auto", .value = CORTEX_M_ISRMASK_AUTO },
2131 { .name = "off", .value = CORTEX_M_ISRMASK_OFF },
2132 { .name = "on", .value = CORTEX_M_ISRMASK_ON },
2133 { .name = NULL, .value = -1 },
2134 };
2135 const Jim_Nvp *n;
2136
2137
2138 retval = cortex_m_verify_pointer(CMD_CTX, cortex_m);
2139 if (retval != ERROR_OK)
2140 return retval;
2141
2142 if (target->state != TARGET_HALTED) {
2143 command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
2144 return ERROR_OK;
2145 }
2146
2147 if (CMD_ARGC > 0) {
2148 n = Jim_Nvp_name2value_simple(nvp_maskisr_modes, CMD_ARGV[0]);
2149 if (n->name == NULL)
2150 return ERROR_COMMAND_SYNTAX_ERROR;
2151 cortex_m->isrmasking_mode = n->value;
2152
2153
2154 if (cortex_m->isrmasking_mode == CORTEX_M_ISRMASK_ON)
2155 cortex_m_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
2156 else
2157 cortex_m_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
2158 }
2159
2160 n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, cortex_m->isrmasking_mode);
2161 command_print(CMD_CTX, "cortex_m interrupt mask %s", n->name);
2162
2163 return ERROR_OK;
2164 }
2165
2166 COMMAND_HANDLER(handle_cortex_m_reset_config_command)
2167 {
2168 struct target *target = get_current_target(CMD_CTX);
2169 struct cortex_m_common *cortex_m = target_to_cm(target);
2170 int retval;
2171 char *reset_config;
2172
2173 retval = cortex_m_verify_pointer(CMD_CTX, cortex_m);
2174 if (retval != ERROR_OK)
2175 return retval;
2176
2177 if (CMD_ARGC > 0) {
2178 if (strcmp(*CMD_ARGV, "sysresetreq") == 0)
2179 cortex_m->soft_reset_config = CORTEX_M_RESET_SYSRESETREQ;
2180 else if (strcmp(*CMD_ARGV, "vectreset") == 0)
2181 cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET;
2182 }
2183
2184 switch (cortex_m->soft_reset_config) {
2185 case CORTEX_M_RESET_SYSRESETREQ:
2186 reset_config = "sysresetreq";
2187 break;
2188
2189 case CORTEX_M_RESET_VECTRESET:
2190 reset_config = "vectreset";
2191 break;
2192
2193 default:
2194 reset_config = "unknown";
2195 break;
2196 }
2197
2198 command_print(CMD_CTX, "cortex_m reset_config %s", reset_config);
2199
2200 return ERROR_OK;
2201 }
2202
2203 static const struct command_registration cortex_m_exec_command_handlers[] = {
2204 {
2205 .name = "maskisr",
2206 .handler = handle_cortex_m_mask_interrupts_command,
2207 .mode = COMMAND_EXEC,
2208 .help = "mask cortex_m interrupts",
2209 .usage = "['auto'|'on'|'off']",
2210 },
2211 {
2212 .name = "vector_catch",
2213 .handler = handle_cortex_m_vector_catch_command,
2214 .mode = COMMAND_EXEC,
2215 .help = "configure hardware vectors to trigger debug entry",
2216 .usage = "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2217 },
2218 {
2219 .name = "reset_config",
2220 .handler = handle_cortex_m_reset_config_command,
2221 .mode = COMMAND_ANY,
2222 .help = "configure software reset handling",
2223 .usage = "['srst'|'sysresetreq'|'vectreset']",
2224 },
2225 COMMAND_REGISTRATION_DONE
2226 };
2227 static const struct command_registration cortex_m_command_handlers[] = {
2228 {
2229 .chain = armv7m_command_handlers,
2230 },
2231 {
2232 .name = "cortex_m",
2233 .mode = COMMAND_EXEC,
2234 .help = "Cortex-M command group",
2235 .usage = "",
2236 .chain = cortex_m_exec_command_handlers,
2237 },
2238 COMMAND_REGISTRATION_DONE
2239 };
2240
2241 struct target_type cortexm_target = {
2242 .name = "cortex_m",
2243 .deprecated_name = "cortex_m3",
2244
2245 .poll = cortex_m_poll,
2246 .arch_state = armv7m_arch_state,
2247
2248 .target_request_data = cortex_m_target_request_data,
2249
2250 .halt = cortex_m_halt,
2251 .resume = cortex_m_resume,
2252 .step = cortex_m_step,
2253
2254 .assert_reset = cortex_m_assert_reset,
2255 .deassert_reset = cortex_m_deassert_reset,
2256 .soft_reset_halt = cortex_m_soft_reset_halt,
2257
2258 .get_gdb_reg_list = armv7m_get_gdb_reg_list,
2259
2260 .read_memory = cortex_m_read_memory,
2261 .write_memory = cortex_m_write_memory,
2262 .checksum_memory = armv7m_checksum_memory,
2263 .blank_check_memory = armv7m_blank_check_memory,
2264
2265 .run_algorithm = armv7m_run_algorithm,
2266 .start_algorithm = armv7m_start_algorithm,
2267 .wait_algorithm = armv7m_wait_algorithm,
2268
2269 .add_breakpoint = cortex_m_add_breakpoint,
2270 .remove_breakpoint = cortex_m_remove_breakpoint,
2271 .add_watchpoint = cortex_m_add_watchpoint,
2272 .remove_watchpoint = cortex_m_remove_watchpoint,
2273
2274 .commands = cortex_m_command_handlers,
2275 .target_create = cortex_m_target_create,
2276 .init_target = cortex_m_init_target,
2277 .examine = cortex_m_examine,
2278 };
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)