1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2006 by Magnus Lundin *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
27 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
29 ***************************************************************************/
34 #include "jtag/interface.h"
35 #include "breakpoints.h"
37 #include "target_request.h"
38 #include "target_type.h"
39 #include "arm_disassembler.h"
41 #include "arm_opcodes.h"
42 #include "arm_semihosting.h"
43 #include <helper/time_support.h>
45 /* NOTE: most of this should work fine for the Cortex-M1 and
46 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
47 * Some differences: M0/M1 doesn't have FBP remapping or the
48 * DWT tracing/profiling support. (So the cycle counter will
49 * not be usable; the other stuff isn't currently used here.)
51 * Although there are some workarounds for errata seen only in r0p0
52 * silicon, such old parts are hard to find and thus not much tested
57 * Returns the type of a break point required by address location
59 #define BKPT_TYPE_BY_ADDR(addr) ((addr) < 0x20000000 ? BKPT_HARD : BKPT_SOFT)
61 /* forward declarations */
62 static int cortex_m_store_core_reg_u32(struct target
*target
,
63 uint32_t num
, uint32_t value
);
64 static void cortex_m_dwt_free(struct target
*target
);
66 static int cortexm_dap_read_coreregister_u32(struct target
*target
,
67 uint32_t *value
, int regnum
)
69 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
70 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
74 /* because the DCB_DCRDR is used for the emulated dcc channel
75 * we have to save/restore the DCB_DCRDR when used */
76 if (target
->dbg_msg_enabled
) {
77 retval
= mem_ap_read_u32(swjdp
, DCB_DCRDR
, &dcrdr
);
78 if (retval
!= ERROR_OK
)
82 retval
= mem_ap_write_u32(swjdp
, DCB_DCRSR
, regnum
);
83 if (retval
!= ERROR_OK
)
86 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DCRDR
, value
);
87 if (retval
!= ERROR_OK
)
90 if (target
->dbg_msg_enabled
) {
91 /* restore DCB_DCRDR - this needs to be in a separate
92 * transaction otherwise the emulated DCC channel breaks */
93 if (retval
== ERROR_OK
)
94 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DCRDR
, dcrdr
);
100 static int cortexm_dap_write_coreregister_u32(struct target
*target
,
101 uint32_t value
, int regnum
)
103 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
104 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
108 /* because the DCB_DCRDR is used for the emulated dcc channel
109 * we have to save/restore the DCB_DCRDR when used */
110 if (target
->dbg_msg_enabled
) {
111 retval
= mem_ap_read_u32(swjdp
, DCB_DCRDR
, &dcrdr
);
112 if (retval
!= ERROR_OK
)
116 retval
= mem_ap_write_u32(swjdp
, DCB_DCRDR
, value
);
117 if (retval
!= ERROR_OK
)
120 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DCRSR
, regnum
| DCRSR_WnR
);
121 if (retval
!= ERROR_OK
)
124 if (target
->dbg_msg_enabled
) {
125 /* restore DCB_DCRDR - this needs to be in a seperate
126 * transaction otherwise the emulated DCC channel breaks */
127 if (retval
== ERROR_OK
)
128 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DCRDR
, dcrdr
);
134 static int cortex_m_write_debug_halt_mask(struct target
*target
,
135 uint32_t mask_on
, uint32_t mask_off
)
137 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
138 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
140 /* mask off status bits */
141 cortex_m
->dcb_dhcsr
&= ~((0xFFFF << 16) | mask_off
);
142 /* create new register mask */
143 cortex_m
->dcb_dhcsr
|= DBGKEY
| C_DEBUGEN
| mask_on
;
145 return mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
, cortex_m
->dcb_dhcsr
);
148 static int cortex_m_clear_halt(struct target
*target
)
150 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
151 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
154 /* clear step if any */
155 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_STEP
);
157 /* Read Debug Fault Status Register */
158 retval
= mem_ap_read_atomic_u32(swjdp
, NVIC_DFSR
, &cortex_m
->nvic_dfsr
);
159 if (retval
!= ERROR_OK
)
162 /* Clear Debug Fault Status */
163 retval
= mem_ap_write_atomic_u32(swjdp
, NVIC_DFSR
, cortex_m
->nvic_dfsr
);
164 if (retval
!= ERROR_OK
)
166 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32
"", cortex_m
->nvic_dfsr
);
171 static int cortex_m_single_step_core(struct target
*target
)
173 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
174 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
178 /* backup dhcsr reg */
179 dhcsr_save
= cortex_m
->dcb_dhcsr
;
181 /* Mask interrupts before clearing halt, if done already. This avoids
182 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
183 * HALT can put the core into an unknown state.
185 if (!(cortex_m
->dcb_dhcsr
& C_MASKINTS
)) {
186 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
,
187 DBGKEY
| C_MASKINTS
| C_HALT
| C_DEBUGEN
);
188 if (retval
!= ERROR_OK
)
191 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
,
192 DBGKEY
| C_MASKINTS
| C_STEP
| C_DEBUGEN
);
193 if (retval
!= ERROR_OK
)
197 /* restore dhcsr reg */
198 cortex_m
->dcb_dhcsr
= dhcsr_save
;
199 cortex_m_clear_halt(target
);
204 static int cortex_m_enable_fpb(struct target
*target
)
206 int retval
= target_write_u32(target
, FP_CTRL
, 3);
207 if (retval
!= ERROR_OK
)
210 /* check the fpb is actually enabled */
212 retval
= target_read_u32(target
, FP_CTRL
, &fpctrl
);
213 if (retval
!= ERROR_OK
)
222 static int cortex_m_endreset_event(struct target
*target
)
227 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
228 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
229 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
230 struct cortex_m_fp_comparator
*fp_list
= cortex_m
->fp_comparator_list
;
231 struct cortex_m_dwt_comparator
*dwt_list
= cortex_m
->dwt_comparator_list
;
233 /* REVISIT The four debug monitor bits are currently ignored... */
234 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DEMCR
, &dcb_demcr
);
235 if (retval
!= ERROR_OK
)
237 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32
"", dcb_demcr
);
239 /* this register is used for emulated dcc channel */
240 retval
= mem_ap_write_u32(swjdp
, DCB_DCRDR
, 0);
241 if (retval
!= ERROR_OK
)
244 /* Enable debug requests */
245 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
246 if (retval
!= ERROR_OK
)
248 if (!(cortex_m
->dcb_dhcsr
& C_DEBUGEN
)) {
249 retval
= mem_ap_write_u32(swjdp
, DCB_DHCSR
, DBGKEY
| C_DEBUGEN
);
250 if (retval
!= ERROR_OK
)
254 /* clear any interrupt masking */
255 cortex_m_write_debug_halt_mask(target
, 0, C_MASKINTS
);
257 /* Enable features controlled by ITM and DWT blocks, and catch only
258 * the vectors we were told to pay attention to.
260 * Target firmware is responsible for all fault handling policy
261 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
262 * or manual updates to the NVIC SHCSR and CCR registers.
264 retval
= mem_ap_write_u32(swjdp
, DCB_DEMCR
, TRCENA
| armv7m
->demcr
);
265 if (retval
!= ERROR_OK
)
268 /* Paranoia: evidently some (early?) chips don't preserve all the
269 * debug state (including FBP, DWT, etc) across reset...
273 retval
= cortex_m_enable_fpb(target
);
274 if (retval
!= ERROR_OK
) {
275 LOG_ERROR("Failed to enable the FPB");
279 cortex_m
->fpb_enabled
= 1;
281 /* Restore FPB registers */
282 for (i
= 0; i
< cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
; i
++) {
283 retval
= target_write_u32(target
, fp_list
[i
].fpcr_address
, fp_list
[i
].fpcr_value
);
284 if (retval
!= ERROR_OK
)
288 /* Restore DWT registers */
289 for (i
= 0; i
< cortex_m
->dwt_num_comp
; i
++) {
290 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 0,
292 if (retval
!= ERROR_OK
)
294 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 4,
296 if (retval
!= ERROR_OK
)
298 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 8,
299 dwt_list
[i
].function
);
300 if (retval
!= ERROR_OK
)
303 retval
= dap_run(swjdp
);
304 if (retval
!= ERROR_OK
)
307 register_cache_invalidate(armv7m
->arm
.core_cache
);
309 /* make sure we have latest dhcsr flags */
310 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
315 static int cortex_m_examine_debug_reason(struct target
*target
)
317 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
319 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason
320 * only check the debug reason if we don't know it already */
322 if ((target
->debug_reason
!= DBG_REASON_DBGRQ
)
323 && (target
->debug_reason
!= DBG_REASON_SINGLESTEP
)) {
324 if (cortex_m
->nvic_dfsr
& DFSR_BKPT
) {
325 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
326 if (cortex_m
->nvic_dfsr
& DFSR_DWTTRAP
)
327 target
->debug_reason
= DBG_REASON_WPTANDBKPT
;
328 } else if (cortex_m
->nvic_dfsr
& DFSR_DWTTRAP
)
329 target
->debug_reason
= DBG_REASON_WATCHPOINT
;
330 else if (cortex_m
->nvic_dfsr
& DFSR_VCATCH
)
331 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
332 else /* EXTERNAL, HALTED */
333 target
->debug_reason
= DBG_REASON_UNDEFINED
;
339 static int cortex_m_examine_exception_reason(struct target
*target
)
341 uint32_t shcsr
= 0, except_sr
= 0, cfsr
= -1, except_ar
= -1;
342 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
343 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
346 retval
= mem_ap_read_u32(swjdp
, NVIC_SHCSR
, &shcsr
);
347 if (retval
!= ERROR_OK
)
349 switch (armv7m
->exception_number
) {
352 case 3: /* Hard Fault */
353 retval
= mem_ap_read_atomic_u32(swjdp
, NVIC_HFSR
, &except_sr
);
354 if (retval
!= ERROR_OK
)
356 if (except_sr
& 0x40000000) {
357 retval
= mem_ap_read_u32(swjdp
, NVIC_CFSR
, &cfsr
);
358 if (retval
!= ERROR_OK
)
362 case 4: /* Memory Management */
363 retval
= mem_ap_read_u32(swjdp
, NVIC_CFSR
, &except_sr
);
364 if (retval
!= ERROR_OK
)
366 retval
= mem_ap_read_u32(swjdp
, NVIC_MMFAR
, &except_ar
);
367 if (retval
!= ERROR_OK
)
370 case 5: /* Bus Fault */
371 retval
= mem_ap_read_u32(swjdp
, NVIC_CFSR
, &except_sr
);
372 if (retval
!= ERROR_OK
)
374 retval
= mem_ap_read_u32(swjdp
, NVIC_BFAR
, &except_ar
);
375 if (retval
!= ERROR_OK
)
378 case 6: /* Usage Fault */
379 retval
= mem_ap_read_u32(swjdp
, NVIC_CFSR
, &except_sr
);
380 if (retval
!= ERROR_OK
)
383 case 11: /* SVCall */
385 case 12: /* Debug Monitor */
386 retval
= mem_ap_read_u32(swjdp
, NVIC_DFSR
, &except_sr
);
387 if (retval
!= ERROR_OK
)
390 case 14: /* PendSV */
392 case 15: /* SysTick */
398 retval
= dap_run(swjdp
);
399 if (retval
== ERROR_OK
)
400 LOG_DEBUG("%s SHCSR 0x%" PRIx32
", SR 0x%" PRIx32
401 ", CFSR 0x%" PRIx32
", AR 0x%" PRIx32
,
402 armv7m_exception_string(armv7m
->exception_number
),
403 shcsr
, except_sr
, cfsr
, except_ar
);
407 static int cortex_m_debug_entry(struct target
*target
)
412 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
413 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
414 struct arm
*arm
= &armv7m
->arm
;
415 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
420 cortex_m_clear_halt(target
);
421 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
422 if (retval
!= ERROR_OK
)
425 retval
= armv7m
->examine_debug_reason(target
);
426 if (retval
!= ERROR_OK
)
429 /* Examine target state and mode
430 * First load register accessible through core debug port */
431 int num_regs
= arm
->core_cache
->num_regs
;
433 for (i
= 0; i
< num_regs
; i
++) {
434 r
= &armv7m
->arm
.core_cache
->reg_list
[i
];
436 arm
->read_core_reg(target
, r
, i
, ARM_MODE_ANY
);
440 xPSR
= buf_get_u32(r
->value
, 0, 32);
442 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
445 cortex_m_store_core_reg_u32(target
, 16, xPSR
& ~0xff);
448 /* Are we in an exception handler */
450 armv7m
->exception_number
= (xPSR
& 0x1FF);
452 arm
->core_mode
= ARM_MODE_HANDLER
;
453 arm
->map
= armv7m_msp_reg_map
;
455 unsigned control
= buf_get_u32(arm
->core_cache
456 ->reg_list
[ARMV7M_CONTROL
].value
, 0, 2);
458 /* is this thread privileged? */
459 arm
->core_mode
= control
& 1
460 ? ARM_MODE_USER_THREAD
463 /* which stack is it using? */
465 arm
->map
= armv7m_psp_reg_map
;
467 arm
->map
= armv7m_msp_reg_map
;
469 armv7m
->exception_number
= 0;
472 if (armv7m
->exception_number
)
473 cortex_m_examine_exception_reason(target
);
475 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32
", target->state: %s",
476 arm_mode_name(arm
->core_mode
),
477 buf_get_u32(arm
->pc
->value
, 0, 32),
478 target_state_name(target
));
480 if (armv7m
->post_debug_entry
) {
481 retval
= armv7m
->post_debug_entry(target
);
482 if (retval
!= ERROR_OK
)
489 static int cortex_m_poll(struct target
*target
)
491 int detected_failure
= ERROR_OK
;
492 int retval
= ERROR_OK
;
493 enum target_state prev_target_state
= target
->state
;
494 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
495 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
497 /* Read from Debug Halting Control and Status Register */
498 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
499 if (retval
!= ERROR_OK
) {
500 target
->state
= TARGET_UNKNOWN
;
504 /* Recover from lockup. See ARMv7-M architecture spec,
505 * section B1.5.15 "Unrecoverable exception cases".
507 if (cortex_m
->dcb_dhcsr
& S_LOCKUP
) {
508 LOG_ERROR("%s -- clearing lockup after double fault",
509 target_name(target
));
510 cortex_m_write_debug_halt_mask(target
, C_HALT
, 0);
511 target
->debug_reason
= DBG_REASON_DBGRQ
;
513 /* We have to execute the rest (the "finally" equivalent, but
514 * still throw this exception again).
516 detected_failure
= ERROR_FAIL
;
518 /* refresh status bits */
519 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
520 if (retval
!= ERROR_OK
)
524 if (cortex_m
->dcb_dhcsr
& S_RESET_ST
) {
525 target
->state
= TARGET_RESET
;
529 if (target
->state
== TARGET_RESET
) {
530 /* Cannot switch context while running so endreset is
531 * called with target->state == TARGET_RESET
533 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32
,
534 cortex_m
->dcb_dhcsr
);
535 retval
= cortex_m_endreset_event(target
);
536 if (retval
!= ERROR_OK
) {
537 target
->state
= TARGET_UNKNOWN
;
540 target
->state
= TARGET_RUNNING
;
541 prev_target_state
= TARGET_RUNNING
;
544 if (cortex_m
->dcb_dhcsr
& S_HALT
) {
545 target
->state
= TARGET_HALTED
;
547 if ((prev_target_state
== TARGET_RUNNING
) || (prev_target_state
== TARGET_RESET
)) {
548 retval
= cortex_m_debug_entry(target
);
549 if (retval
!= ERROR_OK
)
552 if (arm_semihosting(target
, &retval
) != 0)
555 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
557 if (prev_target_state
== TARGET_DEBUG_RUNNING
) {
559 retval
= cortex_m_debug_entry(target
);
560 if (retval
!= ERROR_OK
)
563 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_HALTED
);
567 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
568 * How best to model low power modes?
571 if (target
->state
== TARGET_UNKNOWN
) {
572 /* check if processor is retiring instructions */
573 if (cortex_m
->dcb_dhcsr
& S_RETIRE_ST
) {
574 target
->state
= TARGET_RUNNING
;
579 /* Did we detect a failure condition that we cleared? */
580 if (detected_failure
!= ERROR_OK
)
581 retval
= detected_failure
;
585 static int cortex_m_halt(struct target
*target
)
587 LOG_DEBUG("target->state: %s",
588 target_state_name(target
));
590 if (target
->state
== TARGET_HALTED
) {
591 LOG_DEBUG("target was already halted");
595 if (target
->state
== TARGET_UNKNOWN
)
596 LOG_WARNING("target was in unknown state when halt was requested");
598 if (target
->state
== TARGET_RESET
) {
599 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST
) && jtag_get_srst()) {
600 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
601 return ERROR_TARGET_FAILURE
;
603 /* we came here in a reset_halt or reset_init sequence
604 * debug entry was already prepared in cortex_m3_assert_reset()
606 target
->debug_reason
= DBG_REASON_DBGRQ
;
612 /* Write to Debug Halting Control and Status Register */
613 cortex_m_write_debug_halt_mask(target
, C_HALT
, 0);
615 target
->debug_reason
= DBG_REASON_DBGRQ
;
620 static int cortex_m_soft_reset_halt(struct target
*target
)
622 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
623 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
624 uint32_t dcb_dhcsr
= 0;
625 int retval
, timeout
= 0;
627 /* soft_reset_halt is deprecated on cortex_m as the same functionality
628 * can be obtained by using 'reset halt' and 'cortex_m reset_config vectreset'
629 * As this reset only used VC_CORERESET it would only ever reset the cortex_m
630 * core, not the peripherals */
631 LOG_WARNING("soft_reset_halt is deprecated, please use 'reset halt' instead.");
633 /* Enter debug state on reset; restore DEMCR in endreset_event() */
634 retval
= mem_ap_write_u32(swjdp
, DCB_DEMCR
,
635 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
636 if (retval
!= ERROR_OK
)
639 /* Request a core-only reset */
640 retval
= mem_ap_write_atomic_u32(swjdp
, NVIC_AIRCR
,
641 AIRCR_VECTKEY
| AIRCR_VECTRESET
);
642 if (retval
!= ERROR_OK
)
644 target
->state
= TARGET_RESET
;
646 /* registers are now invalid */
647 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
649 while (timeout
< 100) {
650 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &dcb_dhcsr
);
651 if (retval
== ERROR_OK
) {
652 retval
= mem_ap_read_atomic_u32(swjdp
, NVIC_DFSR
,
653 &cortex_m
->nvic_dfsr
);
654 if (retval
!= ERROR_OK
)
656 if ((dcb_dhcsr
& S_HALT
)
657 && (cortex_m
->nvic_dfsr
& DFSR_VCATCH
)) {
658 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
660 (unsigned) dcb_dhcsr
,
661 (unsigned) cortex_m
->nvic_dfsr
);
662 cortex_m_poll(target
);
663 /* FIXME restore user's vector catch config */
666 LOG_DEBUG("waiting for system reset-halt, "
667 "DHCSR 0x%08x, %d ms",
668 (unsigned) dcb_dhcsr
, timeout
);
677 void cortex_m_enable_breakpoints(struct target
*target
)
679 struct breakpoint
*breakpoint
= target
->breakpoints
;
681 /* set any pending breakpoints */
683 if (!breakpoint
->set
)
684 cortex_m_set_breakpoint(target
, breakpoint
);
685 breakpoint
= breakpoint
->next
;
689 static int cortex_m_resume(struct target
*target
, int current
,
690 uint32_t address
, int handle_breakpoints
, int debug_execution
)
692 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
693 struct breakpoint
*breakpoint
= NULL
;
697 if (target
->state
!= TARGET_HALTED
) {
698 LOG_WARNING("target not halted");
699 return ERROR_TARGET_NOT_HALTED
;
702 if (!debug_execution
) {
703 target_free_all_working_areas(target
);
704 cortex_m_enable_breakpoints(target
);
705 cortex_m_enable_watchpoints(target
);
708 if (debug_execution
) {
709 r
= armv7m
->arm
.core_cache
->reg_list
+ ARMV7M_PRIMASK
;
711 /* Disable interrupts */
712 /* We disable interrupts in the PRIMASK register instead of
713 * masking with C_MASKINTS. This is probably the same issue
714 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
715 * in parallel with disabled interrupts can cause local faults
718 * REVISIT this clearly breaks non-debug execution, since the
719 * PRIMASK register state isn't saved/restored... workaround
720 * by never resuming app code after debug execution.
722 buf_set_u32(r
->value
, 0, 1, 1);
726 /* Make sure we are in Thumb mode */
727 r
= armv7m
->arm
.cpsr
;
728 buf_set_u32(r
->value
, 24, 1, 1);
733 /* current = 1: continue on current pc, otherwise continue at <address> */
736 buf_set_u32(r
->value
, 0, 32, address
);
741 /* if we halted last time due to a bkpt instruction
742 * then we have to manually step over it, otherwise
743 * the core will break again */
745 if (!breakpoint_find(target
, buf_get_u32(r
->value
, 0, 32))
747 armv7m_maybe_skip_bkpt_inst(target
, NULL
);
749 resume_pc
= buf_get_u32(r
->value
, 0, 32);
751 armv7m_restore_context(target
);
753 /* the front-end may request us not to handle breakpoints */
754 if (handle_breakpoints
) {
755 /* Single step past breakpoint at current address */
756 breakpoint
= breakpoint_find(target
, resume_pc
);
758 LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32
" (ID: %" PRIu32
")",
760 breakpoint
->unique_id
);
761 cortex_m_unset_breakpoint(target
, breakpoint
);
762 cortex_m_single_step_core(target
);
763 cortex_m_set_breakpoint(target
, breakpoint
);
768 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
);
770 target
->debug_reason
= DBG_REASON_NOTHALTED
;
772 /* registers are now invalid */
773 register_cache_invalidate(armv7m
->arm
.core_cache
);
775 if (!debug_execution
) {
776 target
->state
= TARGET_RUNNING
;
777 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
778 LOG_DEBUG("target resumed at 0x%" PRIx32
"", resume_pc
);
780 target
->state
= TARGET_DEBUG_RUNNING
;
781 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_RESUMED
);
782 LOG_DEBUG("target debug resumed at 0x%" PRIx32
"", resume_pc
);
788 /* int irqstepcount = 0; */
789 static int cortex_m_step(struct target
*target
, int current
,
790 uint32_t address
, int handle_breakpoints
)
792 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
793 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
794 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
795 struct breakpoint
*breakpoint
= NULL
;
796 struct reg
*pc
= armv7m
->arm
.pc
;
797 bool bkpt_inst_found
= false;
799 bool isr_timed_out
= false;
801 if (target
->state
!= TARGET_HALTED
) {
802 LOG_WARNING("target not halted");
803 return ERROR_TARGET_NOT_HALTED
;
806 /* current = 1: continue on current pc, otherwise continue at <address> */
808 buf_set_u32(pc
->value
, 0, 32, address
);
810 uint32_t pc_value
= buf_get_u32(pc
->value
, 0, 32);
812 /* the front-end may request us not to handle breakpoints */
813 if (handle_breakpoints
) {
814 breakpoint
= breakpoint_find(target
, pc_value
);
816 cortex_m_unset_breakpoint(target
, breakpoint
);
819 armv7m_maybe_skip_bkpt_inst(target
, &bkpt_inst_found
);
821 target
->debug_reason
= DBG_REASON_SINGLESTEP
;
823 armv7m_restore_context(target
);
825 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
827 /* if no bkpt instruction is found at pc then we can perform
828 * a normal step, otherwise we have to manually step over the bkpt
829 * instruction - as such simulate a step */
830 if (bkpt_inst_found
== false) {
831 /* Automatic ISR masking mode off: Just step over the next instruction */
832 if ((cortex_m
->isrmasking_mode
!= CORTEX_M_ISRMASK_AUTO
))
833 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
835 /* Process interrupts during stepping in a way they don't interfere
840 * Set a temporary break point at the current pc and let the core run
841 * with interrupts enabled. Pending interrupts get served and we run
842 * into the breakpoint again afterwards. Then we step over the next
843 * instruction with interrupts disabled.
845 * If the pending interrupts don't complete within time, we leave the
846 * core running. This may happen if the interrupts trigger faster
847 * than the core can process them or the handler doesn't return.
849 * If no more breakpoints are available we simply do a step with
850 * interrupts enabled.
856 * If a break point is already set on the lower half word then a break point on
857 * the upper half word will not break again when the core is restarted. So we
858 * just step over the instruction with interrupts disabled.
860 * The documentation has no information about this, it was found by observation
861 * on STM32F1 and STM32F2. Proper explanation welcome. STM32F0 dosen't seem to
862 * suffer from this problem.
864 * To add some confusion: pc_value has bit 0 always set, while the breakpoint
865 * address has it always cleared. The former is done to indicate thumb mode
869 if ((pc_value
& 0x02) && breakpoint_find(target
, pc_value
& ~0x03)) {
870 LOG_DEBUG("Stepping over next instruction with interrupts disabled");
871 cortex_m_write_debug_halt_mask(target
, C_HALT
| C_MASKINTS
, 0);
872 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
873 /* Re-enable interrupts */
874 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
878 /* Set a temporary break point */
880 retval
= cortex_m_set_breakpoint(target
, breakpoint
);
882 retval
= breakpoint_add(target
, pc_value
, 2, BKPT_TYPE_BY_ADDR(pc_value
));
883 bool tmp_bp_set
= (retval
== ERROR_OK
);
885 /* No more breakpoints left, just do a step */
887 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
890 LOG_DEBUG("Starting core to serve pending interrupts");
891 int64_t t_start
= timeval_ms();
892 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
| C_STEP
);
894 /* Wait for pending handlers to complete or timeout */
896 retval
= mem_ap_read_atomic_u32(swjdp
,
898 &cortex_m
->dcb_dhcsr
);
899 if (retval
!= ERROR_OK
) {
900 target
->state
= TARGET_UNKNOWN
;
903 isr_timed_out
= ((timeval_ms() - t_start
) > 500);
904 } while (!((cortex_m
->dcb_dhcsr
& S_HALT
) || isr_timed_out
));
906 /* only remove breakpoint if we created it */
908 cortex_m_unset_breakpoint(target
, breakpoint
);
910 /* Remove the temporary breakpoint */
911 breakpoint_remove(target
, pc_value
);
915 LOG_DEBUG("Interrupt handlers didn't complete within time, "
916 "leaving target running");
918 /* Step over next instruction with interrupts disabled */
919 cortex_m_write_debug_halt_mask(target
,
922 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
923 /* Re-enable interrupts */
924 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
931 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
932 if (retval
!= ERROR_OK
)
935 /* registers are now invalid */
936 register_cache_invalidate(armv7m
->arm
.core_cache
);
939 cortex_m_set_breakpoint(target
, breakpoint
);
942 /* Leave the core running. The user has to stop execution manually. */
943 target
->debug_reason
= DBG_REASON_NOTHALTED
;
944 target
->state
= TARGET_RUNNING
;
948 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
949 " nvic_icsr = 0x%" PRIx32
,
950 cortex_m
->dcb_dhcsr
, cortex_m
->nvic_icsr
);
952 retval
= cortex_m_debug_entry(target
);
953 if (retval
!= ERROR_OK
)
955 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
957 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
958 " nvic_icsr = 0x%" PRIx32
,
959 cortex_m
->dcb_dhcsr
, cortex_m
->nvic_icsr
);
964 static int cortex_m_assert_reset(struct target
*target
)
966 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
967 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
968 enum cortex_m_soft_reset_config reset_config
= cortex_m
->soft_reset_config
;
970 LOG_DEBUG("target->state: %s",
971 target_state_name(target
));
973 enum reset_types jtag_reset_config
= jtag_get_reset_config();
975 if (target_has_event_action(target
, TARGET_EVENT_RESET_ASSERT
)) {
976 /* allow scripts to override the reset event */
978 target_handle_event(target
, TARGET_EVENT_RESET_ASSERT
);
979 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
980 target
->state
= TARGET_RESET
;
985 /* some cores support connecting while srst is asserted
986 * use that mode is it has been configured */
988 bool srst_asserted
= false;
990 if ((jtag_reset_config
& RESET_HAS_SRST
) &&
991 (jtag_reset_config
& RESET_SRST_NO_GATING
)) {
992 adapter_assert_reset();
993 srst_asserted
= true;
996 /* Enable debug requests */
998 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
999 if (retval
!= ERROR_OK
)
1001 if (!(cortex_m
->dcb_dhcsr
& C_DEBUGEN
)) {
1002 retval
= mem_ap_write_u32(swjdp
, DCB_DHCSR
, DBGKEY
| C_DEBUGEN
);
1003 if (retval
!= ERROR_OK
)
1007 /* If the processor is sleeping in a WFI or WFE instruction, the
1008 * C_HALT bit must be asserted to regain control */
1009 if (cortex_m
->dcb_dhcsr
& S_SLEEP
) {
1010 retval
= mem_ap_write_u32(swjdp
, DCB_DHCSR
, DBGKEY
| C_HALT
| C_DEBUGEN
);
1011 if (retval
!= ERROR_OK
)
1015 retval
= mem_ap_write_u32(swjdp
, DCB_DCRDR
, 0);
1016 if (retval
!= ERROR_OK
)
1019 if (!target
->reset_halt
) {
1020 /* Set/Clear C_MASKINTS in a separate operation */
1021 if (cortex_m
->dcb_dhcsr
& C_MASKINTS
) {
1022 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
,
1023 DBGKEY
| C_DEBUGEN
| C_HALT
);
1024 if (retval
!= ERROR_OK
)
1028 /* clear any debug flags before resuming */
1029 cortex_m_clear_halt(target
);
1031 /* clear C_HALT in dhcsr reg */
1032 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
);
1034 /* Halt in debug on reset; endreset_event() restores DEMCR.
1036 * REVISIT catching BUSERR presumably helps to defend against
1037 * bad vector table entries. Should this include MMERR or
1040 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DEMCR
,
1041 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
1042 if (retval
!= ERROR_OK
)
1046 if (jtag_reset_config
& RESET_HAS_SRST
) {
1047 /* default to asserting srst */
1049 adapter_assert_reset();
1051 /* Use a standard Cortex-M3 software reset mechanism.
1052 * We default to using VECRESET as it is supported on all current cores.
1053 * This has the disadvantage of not resetting the peripherals, so a
1054 * reset-init event handler is needed to perform any peripheral resets.
1056 LOG_DEBUG("Using Cortex-M %s", (reset_config
== CORTEX_M_RESET_SYSRESETREQ
)
1057 ? "SYSRESETREQ" : "VECTRESET");
1059 if (reset_config
== CORTEX_M_RESET_VECTRESET
) {
1060 LOG_WARNING("Only resetting the Cortex-M core, use a reset-init event "
1061 "handler to reset any peripherals or configure hardware srst support.");
1064 retval
= mem_ap_write_atomic_u32(swjdp
, NVIC_AIRCR
,
1065 AIRCR_VECTKEY
| ((reset_config
== CORTEX_M_RESET_SYSRESETREQ
)
1066 ? AIRCR_SYSRESETREQ
: AIRCR_VECTRESET
));
1067 if (retval
!= ERROR_OK
)
1068 LOG_DEBUG("Ignoring AP write error right after reset");
1070 retval
= ahbap_debugport_init(swjdp
);
1071 if (retval
!= ERROR_OK
) {
1072 LOG_ERROR("DP initialisation failed");
1077 /* I do not know why this is necessary, but it
1078 * fixes strange effects (step/resume cause NMI
1079 * after reset) on LM3S6918 -- Michael Schwingen
1082 retval
= mem_ap_read_atomic_u32(swjdp
, NVIC_AIRCR
, &tmp
);
1083 if (retval
!= ERROR_OK
)
1088 target
->state
= TARGET_RESET
;
1089 jtag_add_sleep(50000);
1091 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
1093 if (target
->reset_halt
) {
1094 retval
= target_halt(target
);
1095 if (retval
!= ERROR_OK
)
1102 static int cortex_m_deassert_reset(struct target
*target
)
1104 LOG_DEBUG("target->state: %s",
1105 target_state_name(target
));
1107 /* deassert reset lines */
1108 adapter_deassert_reset();
1113 int cortex_m_set_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1118 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1119 struct cortex_m_fp_comparator
*comparator_list
= cortex_m
->fp_comparator_list
;
1121 if (breakpoint
->set
) {
1122 LOG_WARNING("breakpoint (BPID: %" PRIu32
") already set", breakpoint
->unique_id
);
1126 if (cortex_m
->auto_bp_type
)
1127 breakpoint
->type
= BKPT_TYPE_BY_ADDR(breakpoint
->address
);
1129 if (breakpoint
->type
== BKPT_HARD
) {
1130 while (comparator_list
[fp_num
].used
&& (fp_num
< cortex_m
->fp_num_code
))
1132 if (fp_num
>= cortex_m
->fp_num_code
) {
1133 LOG_ERROR("Can not find free FPB Comparator!");
1136 breakpoint
->set
= fp_num
+ 1;
1137 hilo
= (breakpoint
->address
& 0x2) ? FPCR_REPLACE_BKPT_HIGH
: FPCR_REPLACE_BKPT_LOW
;
1138 comparator_list
[fp_num
].used
= 1;
1139 comparator_list
[fp_num
].fpcr_value
= (breakpoint
->address
& 0x1FFFFFFC) | hilo
| 1;
1140 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
,
1141 comparator_list
[fp_num
].fpcr_value
);
1142 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32
"",
1144 comparator_list
[fp_num
].fpcr_value
);
1145 if (!cortex_m
->fpb_enabled
) {
1146 LOG_DEBUG("FPB wasn't enabled, do it now");
1147 retval
= cortex_m_enable_fpb(target
);
1148 if (retval
!= ERROR_OK
) {
1149 LOG_ERROR("Failed to enable the FPB");
1153 cortex_m
->fpb_enabled
= 1;
1155 } else if (breakpoint
->type
== BKPT_SOFT
) {
1158 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
1159 * semihosting; don't use that. Otherwise the BKPT
1160 * parameter is arbitrary.
1162 buf_set_u32(code
, 0, 32, ARMV5_T_BKPT(0x11));
1163 retval
= target_read_memory(target
,
1164 breakpoint
->address
& 0xFFFFFFFE,
1165 breakpoint
->length
, 1,
1166 breakpoint
->orig_instr
);
1167 if (retval
!= ERROR_OK
)
1169 retval
= target_write_memory(target
,
1170 breakpoint
->address
& 0xFFFFFFFE,
1171 breakpoint
->length
, 1,
1173 if (retval
!= ERROR_OK
)
1175 breakpoint
->set
= true;
1178 LOG_DEBUG("BPID: %" PRIu32
", Type: %d, Address: 0x%08" PRIx32
" Length: %d (set=%d)",
1179 breakpoint
->unique_id
,
1180 (int)(breakpoint
->type
),
1181 breakpoint
->address
,
1188 int cortex_m_unset_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1191 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1192 struct cortex_m_fp_comparator
*comparator_list
= cortex_m
->fp_comparator_list
;
1194 if (!breakpoint
->set
) {
1195 LOG_WARNING("breakpoint not set");
1199 LOG_DEBUG("BPID: %" PRIu32
", Type: %d, Address: 0x%08" PRIx32
" Length: %d (set=%d)",
1200 breakpoint
->unique_id
,
1201 (int)(breakpoint
->type
),
1202 breakpoint
->address
,
1206 if (breakpoint
->type
== BKPT_HARD
) {
1207 int fp_num
= breakpoint
->set
- 1;
1208 if ((fp_num
< 0) || (fp_num
>= cortex_m
->fp_num_code
)) {
1209 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1212 comparator_list
[fp_num
].used
= 0;
1213 comparator_list
[fp_num
].fpcr_value
= 0;
1214 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
,
1215 comparator_list
[fp_num
].fpcr_value
);
1217 /* restore original instruction (kept in target endianness) */
1218 if (breakpoint
->length
== 4) {
1219 retval
= target_write_memory(target
, breakpoint
->address
& 0xFFFFFFFE, 4, 1,
1220 breakpoint
->orig_instr
);
1221 if (retval
!= ERROR_OK
)
1224 retval
= target_write_memory(target
, breakpoint
->address
& 0xFFFFFFFE, 2, 1,
1225 breakpoint
->orig_instr
);
1226 if (retval
!= ERROR_OK
)
1230 breakpoint
->set
= false;
1235 int cortex_m_add_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1237 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1239 if (cortex_m
->auto_bp_type
)
1240 breakpoint
->type
= BKPT_TYPE_BY_ADDR(breakpoint
->address
);
1242 if (breakpoint
->type
!= BKPT_TYPE_BY_ADDR(breakpoint
->address
)) {
1243 if (breakpoint
->type
== BKPT_HARD
) {
1244 LOG_INFO("flash patch comparator requested outside code memory region");
1245 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1248 if (breakpoint
->type
== BKPT_SOFT
) {
1249 LOG_INFO("soft breakpoint requested in code (flash) memory region");
1250 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1254 if ((breakpoint
->type
== BKPT_HARD
) && (cortex_m
->fp_code_available
< 1)) {
1255 LOG_INFO("no flash patch comparator unit available for hardware breakpoint");
1256 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1259 if (breakpoint
->length
== 3) {
1260 LOG_DEBUG("Using a two byte breakpoint for 32bit Thumb-2 request");
1261 breakpoint
->length
= 2;
1264 if ((breakpoint
->length
!= 2)) {
1265 LOG_INFO("only breakpoints of two bytes length supported");
1266 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1269 if (breakpoint
->type
== BKPT_HARD
)
1270 cortex_m
->fp_code_available
--;
1272 return cortex_m_set_breakpoint(target
, breakpoint
);
1275 int cortex_m_remove_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1277 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1279 /* REVISIT why check? FBP can be updated with core running ... */
1280 if (target
->state
!= TARGET_HALTED
) {
1281 LOG_WARNING("target not halted");
1282 return ERROR_TARGET_NOT_HALTED
;
1285 if (cortex_m
->auto_bp_type
)
1286 breakpoint
->type
= BKPT_TYPE_BY_ADDR(breakpoint
->address
);
1288 if (breakpoint
->set
)
1289 cortex_m_unset_breakpoint(target
, breakpoint
);
1291 if (breakpoint
->type
== BKPT_HARD
)
1292 cortex_m
->fp_code_available
++;
1297 int cortex_m_set_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1300 uint32_t mask
, temp
;
1301 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1303 /* watchpoint params were validated earlier */
1305 temp
= watchpoint
->length
;
1312 /* REVISIT Don't fully trust these "not used" records ... users
1313 * may set up breakpoints by hand, e.g. dual-address data value
1314 * watchpoint using comparator #1; comparator #0 matching cycle
1315 * count; send data trace info through ITM and TPIU; etc
1317 struct cortex_m_dwt_comparator
*comparator
;
1319 for (comparator
= cortex_m
->dwt_comparator_list
;
1320 comparator
->used
&& dwt_num
< cortex_m
->dwt_num_comp
;
1321 comparator
++, dwt_num
++)
1323 if (dwt_num
>= cortex_m
->dwt_num_comp
) {
1324 LOG_ERROR("Can not find free DWT Comparator");
1327 comparator
->used
= 1;
1328 watchpoint
->set
= dwt_num
+ 1;
1330 comparator
->comp
= watchpoint
->address
;
1331 target_write_u32(target
, comparator
->dwt_comparator_address
+ 0,
1334 comparator
->mask
= mask
;
1335 target_write_u32(target
, comparator
->dwt_comparator_address
+ 4,
1338 switch (watchpoint
->rw
) {
1340 comparator
->function
= 5;
1343 comparator
->function
= 6;
1346 comparator
->function
= 7;
1349 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1350 comparator
->function
);
1352 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1353 watchpoint
->unique_id
, dwt_num
,
1354 (unsigned) comparator
->comp
,
1355 (unsigned) comparator
->mask
,
1356 (unsigned) comparator
->function
);
1360 int cortex_m_unset_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1362 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1363 struct cortex_m_dwt_comparator
*comparator
;
1366 if (!watchpoint
->set
) {
1367 LOG_WARNING("watchpoint (wpid: %d) not set",
1368 watchpoint
->unique_id
);
1372 dwt_num
= watchpoint
->set
- 1;
1374 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1375 watchpoint
->unique_id
, dwt_num
,
1376 (unsigned) watchpoint
->address
);
1378 if ((dwt_num
< 0) || (dwt_num
>= cortex_m
->dwt_num_comp
)) {
1379 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1383 comparator
= cortex_m
->dwt_comparator_list
+ dwt_num
;
1384 comparator
->used
= 0;
1385 comparator
->function
= 0;
1386 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1387 comparator
->function
);
1389 watchpoint
->set
= false;
1394 int cortex_m_add_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1396 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1398 if (cortex_m
->dwt_comp_available
< 1) {
1399 LOG_DEBUG("no comparators?");
1400 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1403 /* hardware doesn't support data value masking */
1404 if (watchpoint
->mask
!= ~(uint32_t)0) {
1405 LOG_DEBUG("watchpoint value masks not supported");
1406 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1409 /* hardware allows address masks of up to 32K */
1412 for (mask
= 0; mask
< 16; mask
++) {
1413 if ((1u << mask
) == watchpoint
->length
)
1417 LOG_DEBUG("unsupported watchpoint length");
1418 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1420 if (watchpoint
->address
& ((1 << mask
) - 1)) {
1421 LOG_DEBUG("watchpoint address is unaligned");
1422 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1425 /* Caller doesn't seem to be able to describe watching for data
1426 * values of zero; that flags "no value".
1428 * REVISIT This DWT may well be able to watch for specific data
1429 * values. Requires comparator #1 to set DATAVMATCH and match
1430 * the data, and another comparator (DATAVADDR0) matching addr.
1432 if (watchpoint
->value
) {
1433 LOG_DEBUG("data value watchpoint not YET supported");
1434 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1437 cortex_m
->dwt_comp_available
--;
1438 LOG_DEBUG("dwt_comp_available: %d", cortex_m
->dwt_comp_available
);
1443 int cortex_m_remove_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1445 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1447 /* REVISIT why check? DWT can be updated with core running ... */
1448 if (target
->state
!= TARGET_HALTED
) {
1449 LOG_WARNING("target not halted");
1450 return ERROR_TARGET_NOT_HALTED
;
1453 if (watchpoint
->set
)
1454 cortex_m_unset_watchpoint(target
, watchpoint
);
1456 cortex_m
->dwt_comp_available
++;
1457 LOG_DEBUG("dwt_comp_available: %d", cortex_m
->dwt_comp_available
);
1462 void cortex_m_enable_watchpoints(struct target
*target
)
1464 struct watchpoint
*watchpoint
= target
->watchpoints
;
1466 /* set any pending watchpoints */
1467 while (watchpoint
) {
1468 if (!watchpoint
->set
)
1469 cortex_m_set_watchpoint(target
, watchpoint
);
1470 watchpoint
= watchpoint
->next
;
1474 static int cortex_m_load_core_reg_u32(struct target
*target
,
1475 uint32_t num
, uint32_t *value
)
1479 /* NOTE: we "know" here that the register identifiers used
1480 * in the v7m header match the Cortex-M3 Debug Core Register
1481 * Selector values for R0..R15, xPSR, MSP, and PSP.
1485 /* read a normal core register */
1486 retval
= cortexm_dap_read_coreregister_u32(target
, value
, num
);
1488 if (retval
!= ERROR_OK
) {
1489 LOG_ERROR("JTAG failure %i", retval
);
1490 return ERROR_JTAG_DEVICE_ERROR
;
1492 LOG_DEBUG("load from core reg %i value 0x%" PRIx32
"", (int)num
, *value
);
1496 /* Floating-point Status and Registers */
1497 retval
= target_write_u32(target
, DCB_DCRSR
, 0x21);
1498 if (retval
!= ERROR_OK
)
1500 retval
= target_read_u32(target
, DCB_DCRDR
, value
);
1501 if (retval
!= ERROR_OK
)
1503 LOG_DEBUG("load from FPSCR value 0x%" PRIx32
, *value
);
1506 case ARMV7M_S0
... ARMV7M_S31
:
1507 /* Floating-point Status and Registers */
1508 retval
= target_write_u32(target
, DCB_DCRSR
, num
- ARMV7M_S0
+ 0x40);
1509 if (retval
!= ERROR_OK
)
1511 retval
= target_read_u32(target
, DCB_DCRDR
, value
);
1512 if (retval
!= ERROR_OK
)
1514 LOG_DEBUG("load from FPU reg S%d value 0x%" PRIx32
,
1515 (int)(num
- ARMV7M_S0
), *value
);
1518 case ARMV7M_PRIMASK
:
1519 case ARMV7M_BASEPRI
:
1520 case ARMV7M_FAULTMASK
:
1521 case ARMV7M_CONTROL
:
1522 /* Cortex-M3 packages these four registers as bitfields
1523 * in one Debug Core register. So say r0 and r2 docs;
1524 * it was removed from r1 docs, but still works.
1526 cortexm_dap_read_coreregister_u32(target
, value
, 20);
1529 case ARMV7M_PRIMASK
:
1530 *value
= buf_get_u32((uint8_t *)value
, 0, 1);
1533 case ARMV7M_BASEPRI
:
1534 *value
= buf_get_u32((uint8_t *)value
, 8, 8);
1537 case ARMV7M_FAULTMASK
:
1538 *value
= buf_get_u32((uint8_t *)value
, 16, 1);
1541 case ARMV7M_CONTROL
:
1542 *value
= buf_get_u32((uint8_t *)value
, 24, 2);
1546 LOG_DEBUG("load from special reg %i value 0x%" PRIx32
"", (int)num
, *value
);
1550 return ERROR_COMMAND_SYNTAX_ERROR
;
1556 static int cortex_m_store_core_reg_u32(struct target
*target
,
1557 uint32_t num
, uint32_t value
)
1561 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1563 /* NOTE: we "know" here that the register identifiers used
1564 * in the v7m header match the Cortex-M3 Debug Core Register
1565 * Selector values for R0..R15, xPSR, MSP, and PSP.
1569 retval
= cortexm_dap_write_coreregister_u32(target
, value
, num
);
1570 if (retval
!= ERROR_OK
) {
1573 LOG_ERROR("JTAG failure");
1574 r
= armv7m
->arm
.core_cache
->reg_list
+ num
;
1575 r
->dirty
= r
->valid
;
1576 return ERROR_JTAG_DEVICE_ERROR
;
1578 LOG_DEBUG("write core reg %i value 0x%" PRIx32
"", (int)num
, value
);
1582 /* Floating-point Status and Registers */
1583 retval
= target_write_u32(target
, DCB_DCRDR
, value
);
1584 if (retval
!= ERROR_OK
)
1586 retval
= target_write_u32(target
, DCB_DCRSR
, 0x21 | (1<<16));
1587 if (retval
!= ERROR_OK
)
1589 LOG_DEBUG("write FPSCR value 0x%" PRIx32
, value
);
1592 case ARMV7M_S0
... ARMV7M_S31
:
1593 /* Floating-point Status and Registers */
1594 retval
= target_write_u32(target
, DCB_DCRDR
, value
);
1595 if (retval
!= ERROR_OK
)
1597 retval
= target_write_u32(target
, DCB_DCRSR
, (num
- ARMV7M_S0
+ 0x40) | (1<<16));
1598 if (retval
!= ERROR_OK
)
1600 LOG_DEBUG("write FPU reg S%d value 0x%" PRIx32
,
1601 (int)(num
- ARMV7M_S0
), value
);
1604 case ARMV7M_PRIMASK
:
1605 case ARMV7M_BASEPRI
:
1606 case ARMV7M_FAULTMASK
:
1607 case ARMV7M_CONTROL
:
1608 /* Cortex-M3 packages these four registers as bitfields
1609 * in one Debug Core register. So say r0 and r2 docs;
1610 * it was removed from r1 docs, but still works.
1612 cortexm_dap_read_coreregister_u32(target
, ®
, 20);
1615 case ARMV7M_PRIMASK
:
1616 buf_set_u32((uint8_t *)®
, 0, 1, value
);
1619 case ARMV7M_BASEPRI
:
1620 buf_set_u32((uint8_t *)®
, 8, 8, value
);
1623 case ARMV7M_FAULTMASK
:
1624 buf_set_u32((uint8_t *)®
, 16, 1, value
);
1627 case ARMV7M_CONTROL
:
1628 buf_set_u32((uint8_t *)®
, 24, 2, value
);
1632 cortexm_dap_write_coreregister_u32(target
, reg
, 20);
1634 LOG_DEBUG("write special reg %i value 0x%" PRIx32
" ", (int)num
, value
);
1638 return ERROR_COMMAND_SYNTAX_ERROR
;
1644 static int cortex_m_read_memory(struct target
*target
, uint32_t address
,
1645 uint32_t size
, uint32_t count
, uint8_t *buffer
)
1647 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1648 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
1650 if (armv7m
->arm
.is_armv6m
) {
1651 /* armv6m does not handle unaligned memory access */
1652 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
1653 return ERROR_TARGET_UNALIGNED_ACCESS
;
1656 return mem_ap_read(swjdp
, buffer
, size
, count
, address
, true);
1659 static int cortex_m_write_memory(struct target
*target
, uint32_t address
,
1660 uint32_t size
, uint32_t count
, const uint8_t *buffer
)
1662 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1663 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
1665 if (armv7m
->arm
.is_armv6m
) {
1666 /* armv6m does not handle unaligned memory access */
1667 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
1668 return ERROR_TARGET_UNALIGNED_ACCESS
;
1671 return mem_ap_write(swjdp
, buffer
, size
, count
, address
, true);
1674 static int cortex_m_init_target(struct command_context
*cmd_ctx
,
1675 struct target
*target
)
1677 armv7m_build_reg_cache(target
);
1681 void cortex_m_deinit_target(struct target
*target
)
1683 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1685 free(cortex_m
->fp_comparator_list
);
1686 cortex_m_dwt_free(target
);
1690 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1691 * on r/w if the core is not running, and clear on resume or reset ... or
1692 * at least, in a post_restore_context() method.
1695 struct dwt_reg_state
{
1696 struct target
*target
;
1698 uint8_t value
[4]; /* scratch/cache */
1701 static int cortex_m_dwt_get_reg(struct reg
*reg
)
1703 struct dwt_reg_state
*state
= reg
->arch_info
;
1706 int retval
= target_read_u32(state
->target
, state
->addr
, &tmp
);
1707 if (retval
!= ERROR_OK
)
1710 buf_set_u32(state
->value
, 0, 32, tmp
);
1714 static int cortex_m_dwt_set_reg(struct reg
*reg
, uint8_t *buf
)
1716 struct dwt_reg_state
*state
= reg
->arch_info
;
1718 return target_write_u32(state
->target
, state
->addr
,
1719 buf_get_u32(buf
, 0, reg
->size
));
1728 static struct dwt_reg dwt_base_regs
[] = {
1729 { DWT_CTRL
, "dwt_ctrl", 32, },
1730 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1731 * increments while the core is asleep.
1733 { DWT_CYCCNT
, "dwt_cyccnt", 32, },
1734 /* plus some 8 bit counters, useful for profiling with TPIU */
1737 static struct dwt_reg dwt_comp
[] = {
1738 #define DWT_COMPARATOR(i) \
1739 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1740 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1741 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1746 #undef DWT_COMPARATOR
1749 static const struct reg_arch_type dwt_reg_type
= {
1750 .get
= cortex_m_dwt_get_reg
,
1751 .set
= cortex_m_dwt_set_reg
,
1754 static void cortex_m_dwt_addreg(struct target
*t
, struct reg
*r
, struct dwt_reg
*d
)
1756 struct dwt_reg_state
*state
;
1758 state
= calloc(1, sizeof *state
);
1761 state
->addr
= d
->addr
;
1766 r
->value
= state
->value
;
1767 r
->arch_info
= state
;
1768 r
->type
= &dwt_reg_type
;
1771 void cortex_m_dwt_setup(struct cortex_m_common
*cm
, struct target
*target
)
1774 struct reg_cache
*cache
;
1775 struct cortex_m_dwt_comparator
*comparator
;
1778 target_read_u32(target
, DWT_CTRL
, &dwtcr
);
1780 LOG_DEBUG("no DWT");
1784 cm
->dwt_num_comp
= (dwtcr
>> 28) & 0xF;
1785 cm
->dwt_comp_available
= cm
->dwt_num_comp
;
1786 cm
->dwt_comparator_list
= calloc(cm
->dwt_num_comp
,
1787 sizeof(struct cortex_m_dwt_comparator
));
1788 if (!cm
->dwt_comparator_list
) {
1790 cm
->dwt_num_comp
= 0;
1791 LOG_ERROR("out of mem");
1795 cache
= calloc(1, sizeof *cache
);
1798 free(cm
->dwt_comparator_list
);
1801 cache
->name
= "Cortex-M DWT registers";
1802 cache
->num_regs
= 2 + cm
->dwt_num_comp
* 3;
1803 cache
->reg_list
= calloc(cache
->num_regs
, sizeof *cache
->reg_list
);
1804 if (!cache
->reg_list
) {
1809 for (reg
= 0; reg
< 2; reg
++)
1810 cortex_m_dwt_addreg(target
, cache
->reg_list
+ reg
,
1811 dwt_base_regs
+ reg
);
1813 comparator
= cm
->dwt_comparator_list
;
1814 for (i
= 0; i
< cm
->dwt_num_comp
; i
++, comparator
++) {
1817 comparator
->dwt_comparator_address
= DWT_COMP0
+ 0x10 * i
;
1818 for (j
= 0; j
< 3; j
++, reg
++)
1819 cortex_m_dwt_addreg(target
, cache
->reg_list
+ reg
,
1820 dwt_comp
+ 3 * i
+ j
);
1822 /* make sure we clear any watchpoints enabled on the target */
1823 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8, 0);
1826 *register_get_last_cache_p(&target
->reg_cache
) = cache
;
1827 cm
->dwt_cache
= cache
;
1829 LOG_DEBUG("DWT dwtcr 0x%" PRIx32
", comp %d, watch%s",
1830 dwtcr
, cm
->dwt_num_comp
,
1831 (dwtcr
& (0xf << 24)) ? " only" : "/trigger");
1833 /* REVISIT: if num_comp > 1, check whether comparator #1 can
1834 * implement single-address data value watchpoints ... so we
1835 * won't need to check it later, when asked to set one up.
1839 static void cortex_m_dwt_free(struct target
*target
)
1841 struct cortex_m_common
*cm
= target_to_cm(target
);
1842 struct reg_cache
*cache
= cm
->dwt_cache
;
1844 free(cm
->dwt_comparator_list
);
1845 cm
->dwt_comparator_list
= NULL
;
1848 register_unlink_cache(&target
->reg_cache
, cache
);
1850 if (cache
->reg_list
) {
1851 for (size_t i
= 0; i
< cache
->num_regs
; i
++)
1852 free(cache
->reg_list
[i
].arch_info
);
1853 free(cache
->reg_list
);
1857 cm
->dwt_cache
= NULL
;
1860 #define MVFR0 0xe000ef40
1861 #define MVFR1 0xe000ef44
1863 #define MVFR0_DEFAULT_M4 0x10110021
1864 #define MVFR1_DEFAULT_M4 0x11000011
1866 int cortex_m_examine(struct target
*target
)
1869 uint32_t cpuid
, fpcr
, mvfr0
, mvfr1
;
1871 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1872 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
1873 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1875 /* stlink shares the examine handler but does not support
1877 if (!armv7m
->stlink
) {
1878 retval
= ahbap_debugport_init(swjdp
);
1879 if (retval
!= ERROR_OK
)
1883 if (!target_was_examined(target
)) {
1884 target_set_examined(target
);
1886 /* Read from Device Identification Registers */
1887 retval
= target_read_u32(target
, CPUID
, &cpuid
);
1888 if (retval
!= ERROR_OK
)
1892 i
= (cpuid
>> 4) & 0xf;
1894 LOG_DEBUG("Cortex-M%d r%" PRId8
"p%" PRId8
" processor detected",
1895 i
, (uint8_t)((cpuid
>> 20) & 0xf), (uint8_t)((cpuid
>> 0) & 0xf));
1896 LOG_DEBUG("cpuid: 0x%8.8" PRIx32
"", cpuid
);
1898 /* test for floating point feature on cortex-m4 */
1900 target_read_u32(target
, MVFR0
, &mvfr0
);
1901 target_read_u32(target
, MVFR1
, &mvfr1
);
1903 if ((mvfr0
== MVFR0_DEFAULT_M4
) && (mvfr1
== MVFR1_DEFAULT_M4
)) {
1904 LOG_DEBUG("Cortex-M%d floating point feature FPv4_SP found", i
);
1905 armv7m
->fp_feature
= FPv4_SP
;
1907 } else if (i
== 0) {
1908 /* Cortex-M0 does not support unaligned memory access */
1909 armv7m
->arm
.is_armv6m
= true;
1912 if (armv7m
->fp_feature
!= FPv4_SP
&&
1913 armv7m
->arm
.core_cache
->num_regs
> ARMV7M_NUM_CORE_REGS_NOFP
) {
1914 /* free unavailable FPU registers */
1916 for (idx
= ARMV7M_NUM_CORE_REGS_NOFP
;
1917 idx
< armv7m
->arm
.core_cache
->num_regs
;
1919 free(armv7m
->arm
.core_cache
->reg_list
[idx
].value
);
1920 armv7m
->arm
.core_cache
->num_regs
= ARMV7M_NUM_CORE_REGS_NOFP
;
1923 if (i
== 4 || i
== 3) {
1924 /* Cortex-M3/M4 has 4096 bytes autoincrement range */
1925 armv7m
->dap
.tar_autoincr_block
= (1 << 12);
1928 /* Configure trace modules */
1929 retval
= target_write_u32(target
, DCB_DEMCR
, TRCENA
| armv7m
->demcr
);
1930 if (retval
!= ERROR_OK
)
1933 if (armv7m
->trace_config
.config_type
!= DISABLED
) {
1934 armv7m_trace_tpiu_config(target
);
1935 armv7m_trace_itm_config(target
);
1938 /* NOTE: FPB and DWT are both optional. */
1941 target_read_u32(target
, FP_CTRL
, &fpcr
);
1942 cortex_m
->auto_bp_type
= 1;
1943 /* bits [14:12] and [7:4] */
1944 cortex_m
->fp_num_code
= ((fpcr
>> 8) & 0x70) | ((fpcr
>> 4) & 0xF);
1945 cortex_m
->fp_num_lit
= (fpcr
>> 8) & 0xF;
1946 cortex_m
->fp_code_available
= cortex_m
->fp_num_code
;
1947 free(cortex_m
->fp_comparator_list
);
1948 cortex_m
->fp_comparator_list
= calloc(
1949 cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
,
1950 sizeof(struct cortex_m_fp_comparator
));
1951 cortex_m
->fpb_enabled
= fpcr
& 1;
1952 for (i
= 0; i
< cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
; i
++) {
1953 cortex_m
->fp_comparator_list
[i
].type
=
1954 (i
< cortex_m
->fp_num_code
) ? FPCR_CODE
: FPCR_LITERAL
;
1955 cortex_m
->fp_comparator_list
[i
].fpcr_address
= FP_COMP0
+ 4 * i
;
1957 /* make sure we clear any breakpoints enabled on the target */
1958 target_write_u32(target
, cortex_m
->fp_comparator_list
[i
].fpcr_address
, 0);
1960 LOG_DEBUG("FPB fpcr 0x%" PRIx32
", numcode %i, numlit %i",
1962 cortex_m
->fp_num_code
,
1963 cortex_m
->fp_num_lit
);
1966 cortex_m_dwt_free(target
);
1967 cortex_m_dwt_setup(cortex_m
, target
);
1969 /* These hardware breakpoints only work for code in flash! */
1970 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
1971 target_name(target
),
1972 cortex_m
->fp_num_code
,
1973 cortex_m
->dwt_num_comp
);
1979 static int cortex_m_dcc_read(struct target
*target
, uint8_t *value
, uint8_t *ctrl
)
1981 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1982 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
1987 retval
= mem_ap_read(swjdp
, buf
, 2, 1, DCB_DCRDR
, false);
1988 if (retval
!= ERROR_OK
)
1991 dcrdr
= target_buffer_get_u16(target
, buf
);
1992 *ctrl
= (uint8_t)dcrdr
;
1993 *value
= (uint8_t)(dcrdr
>> 8);
1995 LOG_DEBUG("data 0x%x ctrl 0x%x", *value
, *ctrl
);
1997 /* write ack back to software dcc register
1998 * signify we have read data */
1999 if (dcrdr
& (1 << 0)) {
2000 target_buffer_set_u16(target
, buf
, 0);
2001 retval
= mem_ap_write(swjdp
, buf
, 2, 1, DCB_DCRDR
, false);
2002 if (retval
!= ERROR_OK
)
2009 static int cortex_m_target_request_data(struct target
*target
,
2010 uint32_t size
, uint8_t *buffer
)
2016 for (i
= 0; i
< (size
* 4); i
++) {
2017 int retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2018 if (retval
!= ERROR_OK
)
2026 static int cortex_m_handle_target_request(void *priv
)
2028 struct target
*target
= priv
;
2029 if (!target_was_examined(target
))
2032 if (!target
->dbg_msg_enabled
)
2035 if (target
->state
== TARGET_RUNNING
) {
2040 retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2041 if (retval
!= ERROR_OK
)
2044 /* check if we have data */
2045 if (ctrl
& (1 << 0)) {
2048 /* we assume target is quick enough */
2050 for (int i
= 1; i
<= 3; i
++) {
2051 retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2052 if (retval
!= ERROR_OK
)
2054 request
|= ((uint32_t)data
<< (i
* 8));
2056 target_request(target
, request
);
2063 static int cortex_m_init_arch_info(struct target
*target
,
2064 struct cortex_m_common
*cortex_m
, struct jtag_tap
*tap
)
2067 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
2069 armv7m_init_arch_info(target
, armv7m
);
2071 /* prepare JTAG information for the new target */
2072 cortex_m
->jtag_info
.tap
= tap
;
2073 cortex_m
->jtag_info
.scann_size
= 4;
2075 /* default reset mode is to use srst if fitted
2076 * if not it will use CORTEX_M3_RESET_VECTRESET */
2077 cortex_m
->soft_reset_config
= CORTEX_M_RESET_VECTRESET
;
2079 armv7m
->arm
.dap
= &armv7m
->dap
;
2081 /* Leave (only) generic DAP stuff for debugport_init(); */
2082 armv7m
->dap
.jtag_info
= &cortex_m
->jtag_info
;
2083 armv7m
->dap
.memaccess_tck
= 8;
2085 /* Cortex-M3/M4 has 4096 bytes autoincrement range
2086 * but set a safe default to 1024 to support Cortex-M0
2087 * this will be changed in cortex_m3_examine if a M3/M4 is detected */
2088 armv7m
->dap
.tar_autoincr_block
= (1 << 10);
2090 /* register arch-specific functions */
2091 armv7m
->examine_debug_reason
= cortex_m_examine_debug_reason
;
2093 armv7m
->post_debug_entry
= NULL
;
2095 armv7m
->pre_restore_context
= NULL
;
2097 armv7m
->load_core_reg_u32
= cortex_m_load_core_reg_u32
;
2098 armv7m
->store_core_reg_u32
= cortex_m_store_core_reg_u32
;
2100 target_register_timer_callback(cortex_m_handle_target_request
, 1, 1, target
);
2102 retval
= arm_jtag_setup_connection(&cortex_m
->jtag_info
);
2103 if (retval
!= ERROR_OK
)
2109 static int cortex_m_target_create(struct target
*target
, Jim_Interp
*interp
)
2111 struct cortex_m_common
*cortex_m
= calloc(1, sizeof(struct cortex_m_common
));
2113 cortex_m
->common_magic
= CORTEX_M_COMMON_MAGIC
;
2114 cortex_m_init_arch_info(target
, cortex_m
, target
->tap
);
2119 /*--------------------------------------------------------------------------*/
2121 static int cortex_m_verify_pointer(struct command_context
*cmd_ctx
,
2122 struct cortex_m_common
*cm
)
2124 if (cm
->common_magic
!= CORTEX_M_COMMON_MAGIC
) {
2125 command_print(cmd_ctx
, "target is not a Cortex-M");
2126 return ERROR_TARGET_INVALID
;
2132 * Only stuff below this line should need to verify that its target
2133 * is a Cortex-M3. Everything else should have indirected through the
2134 * cortexm3_target structure, which is only used with CM3 targets.
2137 static const struct {
2141 { "hard_err", VC_HARDERR
, },
2142 { "int_err", VC_INTERR
, },
2143 { "bus_err", VC_BUSERR
, },
2144 { "state_err", VC_STATERR
, },
2145 { "chk_err", VC_CHKERR
, },
2146 { "nocp_err", VC_NOCPERR
, },
2147 { "mm_err", VC_MMERR
, },
2148 { "reset", VC_CORERESET
, },
2151 COMMAND_HANDLER(handle_cortex_m_vector_catch_command
)
2153 struct target
*target
= get_current_target(CMD_CTX
);
2154 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2155 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
2156 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
2160 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2161 if (retval
!= ERROR_OK
)
2164 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DEMCR
, &demcr
);
2165 if (retval
!= ERROR_OK
)
2171 if (CMD_ARGC
== 1) {
2172 if (strcmp(CMD_ARGV
[0], "all") == 0) {
2173 catch = VC_HARDERR
| VC_INTERR
| VC_BUSERR
2174 | VC_STATERR
| VC_CHKERR
| VC_NOCPERR
2175 | VC_MMERR
| VC_CORERESET
;
2177 } else if (strcmp(CMD_ARGV
[0], "none") == 0)
2180 while (CMD_ARGC
-- > 0) {
2182 for (i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++) {
2183 if (strcmp(CMD_ARGV
[CMD_ARGC
], vec_ids
[i
].name
) != 0)
2185 catch |= vec_ids
[i
].mask
;
2188 if (i
== ARRAY_SIZE(vec_ids
)) {
2189 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV
[CMD_ARGC
]);
2190 return ERROR_COMMAND_SYNTAX_ERROR
;
2194 /* For now, armv7m->demcr only stores vector catch flags. */
2195 armv7m
->demcr
= catch;
2200 /* write, but don't assume it stuck (why not??) */
2201 retval
= mem_ap_write_u32(swjdp
, DCB_DEMCR
, demcr
);
2202 if (retval
!= ERROR_OK
)
2204 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DEMCR
, &demcr
);
2205 if (retval
!= ERROR_OK
)
2208 /* FIXME be sure to clear DEMCR on clean server shutdown.
2209 * Otherwise the vector catch hardware could fire when there's
2210 * no debugger hooked up, causing much confusion...
2214 for (unsigned i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++) {
2215 command_print(CMD_CTX
, "%9s: %s", vec_ids
[i
].name
,
2216 (demcr
& vec_ids
[i
].mask
) ? "catch" : "ignore");
2222 COMMAND_HANDLER(handle_cortex_m_mask_interrupts_command
)
2224 struct target
*target
= get_current_target(CMD_CTX
);
2225 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2228 static const Jim_Nvp nvp_maskisr_modes
[] = {
2229 { .name
= "auto", .value
= CORTEX_M_ISRMASK_AUTO
},
2230 { .name
= "off", .value
= CORTEX_M_ISRMASK_OFF
},
2231 { .name
= "on", .value
= CORTEX_M_ISRMASK_ON
},
2232 { .name
= NULL
, .value
= -1 },
2237 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2238 if (retval
!= ERROR_OK
)
2241 if (target
->state
!= TARGET_HALTED
) {
2242 command_print(CMD_CTX
, "target must be stopped for \"%s\" command", CMD_NAME
);
2247 n
= Jim_Nvp_name2value_simple(nvp_maskisr_modes
, CMD_ARGV
[0]);
2248 if (n
->name
== NULL
)
2249 return ERROR_COMMAND_SYNTAX_ERROR
;
2250 cortex_m
->isrmasking_mode
= n
->value
;
2253 if (cortex_m
->isrmasking_mode
== CORTEX_M_ISRMASK_ON
)
2254 cortex_m_write_debug_halt_mask(target
, C_HALT
| C_MASKINTS
, 0);
2256 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
2259 n
= Jim_Nvp_value2name_simple(nvp_maskisr_modes
, cortex_m
->isrmasking_mode
);
2260 command_print(CMD_CTX
, "cortex_m interrupt mask %s", n
->name
);
2265 COMMAND_HANDLER(handle_cortex_m_reset_config_command
)
2267 struct target
*target
= get_current_target(CMD_CTX
);
2268 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2272 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2273 if (retval
!= ERROR_OK
)
2277 if (strcmp(*CMD_ARGV
, "sysresetreq") == 0)
2278 cortex_m
->soft_reset_config
= CORTEX_M_RESET_SYSRESETREQ
;
2279 else if (strcmp(*CMD_ARGV
, "vectreset") == 0)
2280 cortex_m
->soft_reset_config
= CORTEX_M_RESET_VECTRESET
;
2283 switch (cortex_m
->soft_reset_config
) {
2284 case CORTEX_M_RESET_SYSRESETREQ
:
2285 reset_config
= "sysresetreq";
2288 case CORTEX_M_RESET_VECTRESET
:
2289 reset_config
= "vectreset";
2293 reset_config
= "unknown";
2297 command_print(CMD_CTX
, "cortex_m reset_config %s", reset_config
);
2302 static const struct command_registration cortex_m_exec_command_handlers
[] = {
2305 .handler
= handle_cortex_m_mask_interrupts_command
,
2306 .mode
= COMMAND_EXEC
,
2307 .help
= "mask cortex_m interrupts",
2308 .usage
= "['auto'|'on'|'off']",
2311 .name
= "vector_catch",
2312 .handler
= handle_cortex_m_vector_catch_command
,
2313 .mode
= COMMAND_EXEC
,
2314 .help
= "configure hardware vectors to trigger debug entry",
2315 .usage
= "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2318 .name
= "reset_config",
2319 .handler
= handle_cortex_m_reset_config_command
,
2320 .mode
= COMMAND_ANY
,
2321 .help
= "configure software reset handling",
2322 .usage
= "['srst'|'sysresetreq'|'vectreset']",
2324 COMMAND_REGISTRATION_DONE
2326 static const struct command_registration cortex_m_command_handlers
[] = {
2328 .chain
= armv7m_command_handlers
,
2331 .chain
= armv7m_trace_command_handlers
,
2335 .mode
= COMMAND_EXEC
,
2336 .help
= "Cortex-M command group",
2338 .chain
= cortex_m_exec_command_handlers
,
2340 COMMAND_REGISTRATION_DONE
2343 struct target_type cortexm_target
= {
2345 .deprecated_name
= "cortex_m3",
2347 .poll
= cortex_m_poll
,
2348 .arch_state
= armv7m_arch_state
,
2350 .target_request_data
= cortex_m_target_request_data
,
2352 .halt
= cortex_m_halt
,
2353 .resume
= cortex_m_resume
,
2354 .step
= cortex_m_step
,
2356 .assert_reset
= cortex_m_assert_reset
,
2357 .deassert_reset
= cortex_m_deassert_reset
,
2358 .soft_reset_halt
= cortex_m_soft_reset_halt
,
2360 .get_gdb_reg_list
= armv7m_get_gdb_reg_list
,
2362 .read_memory
= cortex_m_read_memory
,
2363 .write_memory
= cortex_m_write_memory
,
2364 .checksum_memory
= armv7m_checksum_memory
,
2365 .blank_check_memory
= armv7m_blank_check_memory
,
2367 .run_algorithm
= armv7m_run_algorithm
,
2368 .start_algorithm
= armv7m_start_algorithm
,
2369 .wait_algorithm
= armv7m_wait_algorithm
,
2371 .add_breakpoint
= cortex_m_add_breakpoint
,
2372 .remove_breakpoint
= cortex_m_remove_breakpoint
,
2373 .add_watchpoint
= cortex_m_add_watchpoint
,
2374 .remove_watchpoint
= cortex_m_remove_watchpoint
,
2376 .commands
= cortex_m_command_handlers
,
2377 .target_create
= cortex_m_target_create
,
2378 .init_target
= cortex_m_init_target
,
2379 .examine
= cortex_m_examine
,
2380 .deinit_target
= cortex_m_deinit_target
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)