1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2006 by Magnus Lundin *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
27 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
29 ***************************************************************************/
34 #include "jtag/interface.h"
35 #include "breakpoints.h"
37 #include "target_request.h"
38 #include "target_type.h"
39 #include "arm_disassembler.h"
41 #include "arm_opcodes.h"
42 #include "arm_semihosting.h"
43 #include <helper/time_support.h>
45 /* NOTE: most of this should work fine for the Cortex-M1 and
46 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
47 * Some differences: M0/M1 doesn't have FBP remapping or the
48 * DWT tracing/profiling support. (So the cycle counter will
49 * not be usable; the other stuff isn't currently used here.)
51 * Although there are some workarounds for errata seen only in r0p0
52 * silicon, such old parts are hard to find and thus not much tested
57 * Returns the type of a break point required by address location
59 #define BKPT_TYPE_BY_ADDR(addr) ((addr) < 0x20000000 ? BKPT_HARD : BKPT_SOFT)
62 /* forward declarations */
63 static int cortex_m3_store_core_reg_u32(struct target
*target
,
64 enum armv7m_regtype type
, uint32_t num
, uint32_t value
);
66 static int cortexm3_dap_read_coreregister_u32(struct adiv5_dap
*swjdp
,
67 uint32_t *value
, int regnum
)
72 /* because the DCB_DCRDR is used for the emulated dcc channel
73 * we have to save/restore the DCB_DCRDR when used */
75 retval
= mem_ap_read_u32(swjdp
, DCB_DCRDR
, &dcrdr
);
76 if (retval
!= ERROR_OK
)
79 /* mem_ap_write_u32(swjdp, DCB_DCRSR, regnum); */
80 retval
= dap_setup_accessport(swjdp
, CSW_32BIT
| CSW_ADDRINC_OFF
, DCB_DCRSR
& 0xFFFFFFF0);
81 if (retval
!= ERROR_OK
)
83 retval
= dap_queue_ap_write(swjdp
, AP_REG_BD0
| (DCB_DCRSR
& 0xC), regnum
);
84 if (retval
!= ERROR_OK
)
87 /* mem_ap_read_u32(swjdp, DCB_DCRDR, value); */
88 retval
= dap_setup_accessport(swjdp
, CSW_32BIT
| CSW_ADDRINC_OFF
, DCB_DCRDR
& 0xFFFFFFF0);
89 if (retval
!= ERROR_OK
)
91 retval
= dap_queue_ap_read(swjdp
, AP_REG_BD0
| (DCB_DCRDR
& 0xC), value
);
92 if (retval
!= ERROR_OK
)
95 retval
= dap_run(swjdp
);
96 if (retval
!= ERROR_OK
)
99 /* restore DCB_DCRDR - this needs to be in a seperate
100 * transaction otherwise the emulated DCC channel breaks */
101 if (retval
== ERROR_OK
)
102 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DCRDR
, dcrdr
);
107 static int cortexm3_dap_write_coreregister_u32(struct adiv5_dap
*swjdp
,
108 uint32_t value
, int regnum
)
113 /* because the DCB_DCRDR is used for the emulated dcc channel
114 * we have to save/restore the DCB_DCRDR when used */
116 retval
= mem_ap_read_u32(swjdp
, DCB_DCRDR
, &dcrdr
);
117 if (retval
!= ERROR_OK
)
120 /* mem_ap_write_u32(swjdp, DCB_DCRDR, core_regs[i]); */
121 retval
= dap_setup_accessport(swjdp
, CSW_32BIT
| CSW_ADDRINC_OFF
, DCB_DCRDR
& 0xFFFFFFF0);
122 if (retval
!= ERROR_OK
)
124 retval
= dap_queue_ap_write(swjdp
, AP_REG_BD0
| (DCB_DCRDR
& 0xC), value
);
125 if (retval
!= ERROR_OK
)
128 /* mem_ap_write_u32(swjdp, DCB_DCRSR, i | DCRSR_WnR); */
129 retval
= dap_setup_accessport(swjdp
, CSW_32BIT
| CSW_ADDRINC_OFF
, DCB_DCRSR
& 0xFFFFFFF0);
130 if (retval
!= ERROR_OK
)
132 retval
= dap_queue_ap_write(swjdp
, AP_REG_BD0
| (DCB_DCRSR
& 0xC), regnum
| DCRSR_WnR
);
133 if (retval
!= ERROR_OK
)
136 retval
= dap_run(swjdp
);
137 if (retval
!= ERROR_OK
)
140 /* restore DCB_DCRDR - this needs to be in a seperate
141 * transaction otherwise the emulated DCC channel breaks */
142 if (retval
== ERROR_OK
)
143 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DCRDR
, dcrdr
);
148 static int cortex_m3_write_debug_halt_mask(struct target
*target
,
149 uint32_t mask_on
, uint32_t mask_off
)
151 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
152 struct adiv5_dap
*swjdp
= cortex_m3
->armv7m
.arm
.dap
;
154 /* mask off status bits */
155 cortex_m3
->dcb_dhcsr
&= ~((0xFFFF << 16) | mask_off
);
156 /* create new register mask */
157 cortex_m3
->dcb_dhcsr
|= DBGKEY
| C_DEBUGEN
| mask_on
;
159 return mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
, cortex_m3
->dcb_dhcsr
);
162 static int cortex_m3_clear_halt(struct target
*target
)
164 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
165 struct adiv5_dap
*swjdp
= cortex_m3
->armv7m
.arm
.dap
;
168 /* clear step if any */
169 cortex_m3_write_debug_halt_mask(target
, C_HALT
, C_STEP
);
171 /* Read Debug Fault Status Register */
172 retval
= mem_ap_read_atomic_u32(swjdp
, NVIC_DFSR
, &cortex_m3
->nvic_dfsr
);
173 if (retval
!= ERROR_OK
)
176 /* Clear Debug Fault Status */
177 retval
= mem_ap_write_atomic_u32(swjdp
, NVIC_DFSR
, cortex_m3
->nvic_dfsr
);
178 if (retval
!= ERROR_OK
)
180 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32
"", cortex_m3
->nvic_dfsr
);
185 static int cortex_m3_single_step_core(struct target
*target
)
187 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
188 struct adiv5_dap
*swjdp
= cortex_m3
->armv7m
.arm
.dap
;
192 /* backup dhcsr reg */
193 dhcsr_save
= cortex_m3
->dcb_dhcsr
;
195 /* Mask interrupts before clearing halt, if done already. This avoids
196 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
197 * HALT can put the core into an unknown state.
199 if (!(cortex_m3
->dcb_dhcsr
& C_MASKINTS
)) {
200 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
,
201 DBGKEY
| C_MASKINTS
| C_HALT
| C_DEBUGEN
);
202 if (retval
!= ERROR_OK
)
205 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
,
206 DBGKEY
| C_MASKINTS
| C_STEP
| C_DEBUGEN
);
207 if (retval
!= ERROR_OK
)
211 /* restore dhcsr reg */
212 cortex_m3
->dcb_dhcsr
= dhcsr_save
;
213 cortex_m3_clear_halt(target
);
218 static int cortex_m3_endreset_event(struct target
*target
)
223 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
224 struct armv7m_common
*armv7m
= &cortex_m3
->armv7m
;
225 struct adiv5_dap
*swjdp
= cortex_m3
->armv7m
.arm
.dap
;
226 struct cortex_m3_fp_comparator
*fp_list
= cortex_m3
->fp_comparator_list
;
227 struct cortex_m3_dwt_comparator
*dwt_list
= cortex_m3
->dwt_comparator_list
;
229 /* REVISIT The four debug monitor bits are currently ignored... */
230 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DEMCR
, &dcb_demcr
);
231 if (retval
!= ERROR_OK
)
233 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32
"", dcb_demcr
);
235 /* this register is used for emulated dcc channel */
236 retval
= mem_ap_write_u32(swjdp
, DCB_DCRDR
, 0);
237 if (retval
!= ERROR_OK
)
240 /* Enable debug requests */
241 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
242 if (retval
!= ERROR_OK
)
244 if (!(cortex_m3
->dcb_dhcsr
& C_DEBUGEN
)) {
245 retval
= mem_ap_write_u32(swjdp
, DCB_DHCSR
, DBGKEY
| C_DEBUGEN
);
246 if (retval
!= ERROR_OK
)
250 /* clear any interrupt masking */
251 cortex_m3_write_debug_halt_mask(target
, 0, C_MASKINTS
);
253 /* Enable features controlled by ITM and DWT blocks, and catch only
254 * the vectors we were told to pay attention to.
256 * Target firmware is responsible for all fault handling policy
257 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
258 * or manual updates to the NVIC SHCSR and CCR registers.
260 retval
= mem_ap_write_u32(swjdp
, DCB_DEMCR
, TRCENA
| armv7m
->demcr
);
261 if (retval
!= ERROR_OK
)
264 /* Paranoia: evidently some (early?) chips don't preserve all the
265 * debug state (including FBP, DWT, etc) across reset...
269 retval
= target_write_u32(target
, FP_CTRL
, 3);
270 if (retval
!= ERROR_OK
)
273 cortex_m3
->fpb_enabled
= 1;
275 /* Restore FPB registers */
276 for (i
= 0; i
< cortex_m3
->fp_num_code
+ cortex_m3
->fp_num_lit
; i
++) {
277 retval
= target_write_u32(target
, fp_list
[i
].fpcr_address
, fp_list
[i
].fpcr_value
);
278 if (retval
!= ERROR_OK
)
282 /* Restore DWT registers */
283 for (i
= 0; i
< cortex_m3
->dwt_num_comp
; i
++) {
284 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 0,
286 if (retval
!= ERROR_OK
)
288 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 4,
290 if (retval
!= ERROR_OK
)
292 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 8,
293 dwt_list
[i
].function
);
294 if (retval
!= ERROR_OK
)
297 retval
= dap_run(swjdp
);
298 if (retval
!= ERROR_OK
)
301 register_cache_invalidate(cortex_m3
->armv7m
.core_cache
);
303 /* make sure we have latest dhcsr flags */
304 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
309 static int cortex_m3_examine_debug_reason(struct target
*target
)
311 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
313 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason
314 * only check the debug reason if we don't know it already */
316 if ((target
->debug_reason
!= DBG_REASON_DBGRQ
)
317 && (target
->debug_reason
!= DBG_REASON_SINGLESTEP
)) {
318 if (cortex_m3
->nvic_dfsr
& DFSR_BKPT
) {
319 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
320 if (cortex_m3
->nvic_dfsr
& DFSR_DWTTRAP
)
321 target
->debug_reason
= DBG_REASON_WPTANDBKPT
;
322 } else if (cortex_m3
->nvic_dfsr
& DFSR_DWTTRAP
)
323 target
->debug_reason
= DBG_REASON_WATCHPOINT
;
324 else if (cortex_m3
->nvic_dfsr
& DFSR_VCATCH
)
325 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
326 else /* EXTERNAL, HALTED */
327 target
->debug_reason
= DBG_REASON_UNDEFINED
;
333 static int cortex_m3_examine_exception_reason(struct target
*target
)
335 uint32_t shcsr
= 0, except_sr
= 0, cfsr
= -1, except_ar
= -1;
336 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
337 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
340 retval
= mem_ap_read_u32(swjdp
, NVIC_SHCSR
, &shcsr
);
341 if (retval
!= ERROR_OK
)
343 switch (armv7m
->exception_number
) {
346 case 3: /* Hard Fault */
347 retval
= mem_ap_read_atomic_u32(swjdp
, NVIC_HFSR
, &except_sr
);
348 if (retval
!= ERROR_OK
)
350 if (except_sr
& 0x40000000) {
351 retval
= mem_ap_read_u32(swjdp
, NVIC_CFSR
, &cfsr
);
352 if (retval
!= ERROR_OK
)
356 case 4: /* Memory Management */
357 retval
= mem_ap_read_u32(swjdp
, NVIC_CFSR
, &except_sr
);
358 if (retval
!= ERROR_OK
)
360 retval
= mem_ap_read_u32(swjdp
, NVIC_MMFAR
, &except_ar
);
361 if (retval
!= ERROR_OK
)
364 case 5: /* Bus Fault */
365 retval
= mem_ap_read_u32(swjdp
, NVIC_CFSR
, &except_sr
);
366 if (retval
!= ERROR_OK
)
368 retval
= mem_ap_read_u32(swjdp
, NVIC_BFAR
, &except_ar
);
369 if (retval
!= ERROR_OK
)
372 case 6: /* Usage Fault */
373 retval
= mem_ap_read_u32(swjdp
, NVIC_CFSR
, &except_sr
);
374 if (retval
!= ERROR_OK
)
377 case 11: /* SVCall */
379 case 12: /* Debug Monitor */
380 retval
= mem_ap_read_u32(swjdp
, NVIC_DFSR
, &except_sr
);
381 if (retval
!= ERROR_OK
)
384 case 14: /* PendSV */
386 case 15: /* SysTick */
392 retval
= dap_run(swjdp
);
393 if (retval
== ERROR_OK
)
394 LOG_DEBUG("%s SHCSR 0x%" PRIx32
", SR 0x%" PRIx32
395 ", CFSR 0x%" PRIx32
", AR 0x%" PRIx32
,
396 armv7m_exception_string(armv7m
->exception_number
),
397 shcsr
, except_sr
, cfsr
, except_ar
);
401 static int cortex_m3_debug_entry(struct target
*target
)
406 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
407 struct armv7m_common
*armv7m
= &cortex_m3
->armv7m
;
408 struct arm
*arm
= &armv7m
->arm
;
409 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
414 cortex_m3_clear_halt(target
);
415 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
416 if (retval
!= ERROR_OK
)
419 retval
= armv7m
->examine_debug_reason(target
);
420 if (retval
!= ERROR_OK
)
423 /* Examine target state and mode
424 * First load register acessible through core debug port*/
425 int num_regs
= armv7m
->core_cache
->num_regs
;
427 for (i
= 0; i
< num_regs
; i
++) {
428 if (!armv7m
->core_cache
->reg_list
[i
].valid
)
429 armv7m
->read_core_reg(target
, i
);
432 r
= armv7m
->core_cache
->reg_list
+ ARMV7M_xPSR
;
433 xPSR
= buf_get_u32(r
->value
, 0, 32);
435 #ifdef ARMV7_GDB_HACKS
436 /* FIXME this breaks on scan chains with more than one Cortex-M3.
437 * Instead, each CM3 should have its own dummy value...
439 /* copy real xpsr reg for gdb, setting thumb bit */
440 buf_set_u32(armv7m_gdb_dummy_cpsr_value
, 0, 32, xPSR
);
441 buf_set_u32(armv7m_gdb_dummy_cpsr_value
, 5, 1, 1);
442 armv7m_gdb_dummy_cpsr_reg
.valid
= r
->valid
;
443 armv7m_gdb_dummy_cpsr_reg
.dirty
= r
->dirty
;
446 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
449 cortex_m3_store_core_reg_u32(target
, ARMV7M_REGISTER_CORE_GP
, 16, xPSR
& ~0xff);
452 /* Are we in an exception handler */
454 armv7m
->core_mode
= ARMV7M_MODE_HANDLER
;
455 armv7m
->exception_number
= (xPSR
& 0x1FF);
457 arm
->core_mode
= ARM_MODE_HANDLER
;
458 arm
->map
= armv7m_msp_reg_map
;
460 unsigned control
= buf_get_u32(armv7m
->core_cache
461 ->reg_list
[ARMV7M_CONTROL
].value
, 0, 2);
463 /* is this thread privileged? */
464 armv7m
->core_mode
= control
& 1;
465 arm
->core_mode
= armv7m
->core_mode
466 ? ARM_MODE_USER_THREAD
469 /* which stack is it using? */
471 arm
->map
= armv7m_psp_reg_map
;
473 arm
->map
= armv7m_msp_reg_map
;
475 armv7m
->exception_number
= 0;
478 if (armv7m
->exception_number
)
479 cortex_m3_examine_exception_reason(target
);
481 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32
", target->state: %s",
482 armv7m_mode_strings
[armv7m
->core_mode
],
483 *(uint32_t *)(arm
->pc
->value
),
484 target_state_name(target
));
486 if (armv7m
->post_debug_entry
) {
487 retval
= armv7m
->post_debug_entry(target
);
488 if (retval
!= ERROR_OK
)
495 static int cortex_m3_poll(struct target
*target
)
497 int detected_failure
= ERROR_OK
;
498 int retval
= ERROR_OK
;
499 enum target_state prev_target_state
= target
->state
;
500 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
501 struct adiv5_dap
*swjdp
= cortex_m3
->armv7m
.arm
.dap
;
503 /* Read from Debug Halting Control and Status Register */
504 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
505 if (retval
!= ERROR_OK
) {
506 target
->state
= TARGET_UNKNOWN
;
510 /* Recover from lockup. See ARMv7-M architecture spec,
511 * section B1.5.15 "Unrecoverable exception cases".
513 if (cortex_m3
->dcb_dhcsr
& S_LOCKUP
) {
514 LOG_ERROR("%s -- clearing lockup after double fault",
515 target_name(target
));
516 cortex_m3_write_debug_halt_mask(target
, C_HALT
, 0);
517 target
->debug_reason
= DBG_REASON_DBGRQ
;
519 /* We have to execute the rest (the "finally" equivalent, but
520 * still throw this exception again).
522 detected_failure
= ERROR_FAIL
;
524 /* refresh status bits */
525 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
526 if (retval
!= ERROR_OK
)
530 if (cortex_m3
->dcb_dhcsr
& S_RESET_ST
) {
531 /* check if still in reset */
532 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
533 if (retval
!= ERROR_OK
)
536 if (cortex_m3
->dcb_dhcsr
& S_RESET_ST
) {
537 target
->state
= TARGET_RESET
;
542 if (target
->state
== TARGET_RESET
) {
543 /* Cannot switch context while running so endreset is
544 * called with target->state == TARGET_RESET
546 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32
,
547 cortex_m3
->dcb_dhcsr
);
548 cortex_m3_endreset_event(target
);
549 target
->state
= TARGET_RUNNING
;
550 prev_target_state
= TARGET_RUNNING
;
553 if (cortex_m3
->dcb_dhcsr
& S_HALT
) {
554 target
->state
= TARGET_HALTED
;
556 if ((prev_target_state
== TARGET_RUNNING
) || (prev_target_state
== TARGET_RESET
)) {
557 retval
= cortex_m3_debug_entry(target
);
558 if (retval
!= ERROR_OK
)
561 if (arm_semihosting(target
, &retval
) != 0)
564 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
566 if (prev_target_state
== TARGET_DEBUG_RUNNING
) {
568 retval
= cortex_m3_debug_entry(target
);
569 if (retval
!= ERROR_OK
)
572 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_HALTED
);
576 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
577 * How best to model low power modes?
580 if (target
->state
== TARGET_UNKNOWN
) {
581 /* check if processor is retiring instructions */
582 if (cortex_m3
->dcb_dhcsr
& S_RETIRE_ST
) {
583 target
->state
= TARGET_RUNNING
;
588 /* Did we detect a failure condition that we cleared? */
589 if (detected_failure
!= ERROR_OK
)
590 retval
= detected_failure
;
594 static int cortex_m3_halt(struct target
*target
)
596 LOG_DEBUG("target->state: %s",
597 target_state_name(target
));
599 if (target
->state
== TARGET_HALTED
) {
600 LOG_DEBUG("target was already halted");
604 if (target
->state
== TARGET_UNKNOWN
)
605 LOG_WARNING("target was in unknown state when halt was requested");
607 if (target
->state
== TARGET_RESET
) {
608 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST
) && jtag_get_srst()) {
609 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
610 return ERROR_TARGET_FAILURE
;
612 /* we came here in a reset_halt or reset_init sequence
613 * debug entry was already prepared in cortex_m3_assert_reset()
615 target
->debug_reason
= DBG_REASON_DBGRQ
;
621 /* Write to Debug Halting Control and Status Register */
622 cortex_m3_write_debug_halt_mask(target
, C_HALT
, 0);
624 target
->debug_reason
= DBG_REASON_DBGRQ
;
629 static int cortex_m3_soft_reset_halt(struct target
*target
)
631 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
632 struct adiv5_dap
*swjdp
= cortex_m3
->armv7m
.arm
.dap
;
633 uint32_t dcb_dhcsr
= 0;
634 int retval
, timeout
= 0;
636 /* Enter debug state on reset; restore DEMCR in endreset_event() */
637 retval
= mem_ap_write_u32(swjdp
, DCB_DEMCR
,
638 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
639 if (retval
!= ERROR_OK
)
642 /* Request a core-only reset */
643 retval
= mem_ap_write_atomic_u32(swjdp
, NVIC_AIRCR
,
644 AIRCR_VECTKEY
| AIRCR_VECTRESET
);
645 if (retval
!= ERROR_OK
)
647 target
->state
= TARGET_RESET
;
649 /* registers are now invalid */
650 register_cache_invalidate(cortex_m3
->armv7m
.core_cache
);
652 while (timeout
< 100) {
653 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &dcb_dhcsr
);
654 if (retval
== ERROR_OK
) {
655 retval
= mem_ap_read_atomic_u32(swjdp
, NVIC_DFSR
,
656 &cortex_m3
->nvic_dfsr
);
657 if (retval
!= ERROR_OK
)
659 if ((dcb_dhcsr
& S_HALT
)
660 && (cortex_m3
->nvic_dfsr
& DFSR_VCATCH
)) {
661 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
663 (unsigned) dcb_dhcsr
,
664 (unsigned) cortex_m3
->nvic_dfsr
);
665 cortex_m3_poll(target
);
666 /* FIXME restore user's vector catch config */
669 LOG_DEBUG("waiting for system reset-halt, "
670 "DHCSR 0x%08x, %d ms",
671 (unsigned) dcb_dhcsr
, timeout
);
680 static void cortex_m3_enable_breakpoints(struct target
*target
)
682 struct breakpoint
*breakpoint
= target
->breakpoints
;
684 /* set any pending breakpoints */
686 if (!breakpoint
->set
)
687 cortex_m3_set_breakpoint(target
, breakpoint
);
688 breakpoint
= breakpoint
->next
;
692 static int cortex_m3_resume(struct target
*target
, int current
,
693 uint32_t address
, int handle_breakpoints
, int debug_execution
)
695 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
696 struct breakpoint
*breakpoint
= NULL
;
700 if (target
->state
!= TARGET_HALTED
) {
701 LOG_WARNING("target not halted");
702 return ERROR_TARGET_NOT_HALTED
;
705 if (!debug_execution
) {
706 target_free_all_working_areas(target
);
707 cortex_m3_enable_breakpoints(target
);
708 cortex_m3_enable_watchpoints(target
);
711 if (debug_execution
) {
712 r
= armv7m
->core_cache
->reg_list
+ ARMV7M_PRIMASK
;
714 /* Disable interrupts */
715 /* We disable interrupts in the PRIMASK register instead of
716 * masking with C_MASKINTS. This is probably the same issue
717 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
718 * in parallel with disabled interrupts can cause local faults
721 * REVISIT this clearly breaks non-debug execution, since the
722 * PRIMASK register state isn't saved/restored... workaround
723 * by never resuming app code after debug execution.
725 buf_set_u32(r
->value
, 0, 1, 1);
729 /* Make sure we are in Thumb mode */
730 r
= armv7m
->core_cache
->reg_list
+ ARMV7M_xPSR
;
731 buf_set_u32(r
->value
, 24, 1, 1);
736 /* current = 1: continue on current pc, otherwise continue at <address> */
739 buf_set_u32(r
->value
, 0, 32, address
);
744 /* if we halted last time due to a bkpt instruction
745 * then we have to manually step over it, otherwise
746 * the core will break again */
748 if (!breakpoint_find(target
, buf_get_u32(r
->value
, 0, 32))
750 armv7m_maybe_skip_bkpt_inst(target
, NULL
);
752 resume_pc
= buf_get_u32(r
->value
, 0, 32);
754 armv7m_restore_context(target
);
756 /* the front-end may request us not to handle breakpoints */
757 if (handle_breakpoints
) {
758 /* Single step past breakpoint at current address */
759 breakpoint
= breakpoint_find(target
, resume_pc
);
761 LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32
" (ID: %d)",
763 breakpoint
->unique_id
);
764 cortex_m3_unset_breakpoint(target
, breakpoint
);
765 cortex_m3_single_step_core(target
);
766 cortex_m3_set_breakpoint(target
, breakpoint
);
771 cortex_m3_write_debug_halt_mask(target
, 0, C_HALT
);
773 target
->debug_reason
= DBG_REASON_NOTHALTED
;
775 /* registers are now invalid */
776 register_cache_invalidate(armv7m
->core_cache
);
778 if (!debug_execution
) {
779 target
->state
= TARGET_RUNNING
;
780 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
781 LOG_DEBUG("target resumed at 0x%" PRIx32
"", resume_pc
);
783 target
->state
= TARGET_DEBUG_RUNNING
;
784 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_RESUMED
);
785 LOG_DEBUG("target debug resumed at 0x%" PRIx32
"", resume_pc
);
791 /* int irqstepcount = 0; */
792 static int cortex_m3_step(struct target
*target
, int current
,
793 uint32_t address
, int handle_breakpoints
)
795 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
796 struct armv7m_common
*armv7m
= &cortex_m3
->armv7m
;
797 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
798 struct breakpoint
*breakpoint
= NULL
;
799 struct reg
*pc
= armv7m
->arm
.pc
;
800 bool bkpt_inst_found
= false;
802 bool isr_timed_out
= false;
804 if (target
->state
!= TARGET_HALTED
) {
805 LOG_WARNING("target not halted");
806 return ERROR_TARGET_NOT_HALTED
;
809 /* current = 1: continue on current pc, otherwise continue at <address> */
811 buf_set_u32(pc
->value
, 0, 32, address
);
813 uint32_t pc_value
= buf_get_u32(pc
->value
, 0, 32);
815 /* the front-end may request us not to handle breakpoints */
816 if (handle_breakpoints
) {
817 breakpoint
= breakpoint_find(target
, pc_value
);
819 cortex_m3_unset_breakpoint(target
, breakpoint
);
822 armv7m_maybe_skip_bkpt_inst(target
, &bkpt_inst_found
);
824 target
->debug_reason
= DBG_REASON_SINGLESTEP
;
826 armv7m_restore_context(target
);
828 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
830 /* if no bkpt instruction is found at pc then we can perform
831 * a normal step, otherwise we have to manually step over the bkpt
832 * instruction - as such simulate a step */
833 if (bkpt_inst_found
== false) {
834 /* Automatic ISR masking mode off: Just step over the next instruction */
835 if ((cortex_m3
->isrmasking_mode
!= CORTEX_M3_ISRMASK_AUTO
))
836 cortex_m3_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
838 /* Process interrupts during stepping in a way they don't interfere
843 * Set a temporary break point at the current pc and let the core run
844 * with interrupts enabled. Pending interrupts get served and we run
845 * into the breakpoint again afterwards. Then we step over the next
846 * instruction with interrupts disabled.
848 * If the pending interrupts don't complete within time, we leave the
849 * core running. This may happen if the interrupts trigger faster
850 * than the core can process them or the handler doesn't return.
852 * If no more breakpoints are available we simply do a step with
853 * interrupts enabled.
859 * If a break point is already set on the lower half word then a break point on
860 * the upper half word will not break again when the core is restarted. So we
861 * just step over the instruction with interrupts disabled.
863 * The documentation has no information about this, it was found by observation
864 * on STM32F1 and STM32F2. Proper explanation welcome. STM32F0 dosen't seem to
865 * suffer from this problem.
867 * To add some confusion: pc_value has bit 0 always set, while the breakpoint
868 * address has it always cleared. The former is done to indicate thumb mode
872 if ((pc_value
& 0x02) && breakpoint_find(target
, pc_value
& ~0x03)) {
873 LOG_DEBUG("Stepping over next instruction with interrupts disabled");
874 cortex_m3_write_debug_halt_mask(target
, C_HALT
| C_MASKINTS
, 0);
875 cortex_m3_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
876 /* Re-enable interrupts */
877 cortex_m3_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
881 /* Set a temporary break point */
883 retval
= cortex_m3_set_breakpoint(target
, breakpoint
);
885 retval
= breakpoint_add(target
, pc_value
, 2, BKPT_TYPE_BY_ADDR(pc_value
));
886 bool tmp_bp_set
= (retval
== ERROR_OK
);
888 /* No more breakpoints left, just do a step */
890 cortex_m3_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
893 LOG_DEBUG("Starting core to serve pending interrupts");
894 int64_t t_start
= timeval_ms();
895 cortex_m3_write_debug_halt_mask(target
, 0, C_HALT
| C_STEP
);
897 /* Wait for pending handlers to complete or timeout */
899 retval
= mem_ap_read_atomic_u32(swjdp
,
901 &cortex_m3
->dcb_dhcsr
);
902 if (retval
!= ERROR_OK
) {
903 target
->state
= TARGET_UNKNOWN
;
906 isr_timed_out
= ((timeval_ms() - t_start
) > 500);
907 } while (!((cortex_m3
->dcb_dhcsr
& S_HALT
) || isr_timed_out
));
909 /* only remove breakpoint if we created it */
911 cortex_m3_unset_breakpoint(target
, breakpoint
);
913 /* Remove the temporary breakpoint */
914 breakpoint_remove(target
, pc_value
);
918 LOG_DEBUG("Interrupt handlers didn't complete within time, "
919 "leaving target running");
921 /* Step over next instruction with interrupts disabled */
922 cortex_m3_write_debug_halt_mask(target
,
925 cortex_m3_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
926 /* Re-enable interrupts */
927 cortex_m3_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
934 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
935 if (retval
!= ERROR_OK
)
938 /* registers are now invalid */
939 register_cache_invalidate(cortex_m3
->armv7m
.core_cache
);
942 cortex_m3_set_breakpoint(target
, breakpoint
);
945 /* Leave the core running. The user has to stop execution manually. */
946 target
->debug_reason
= DBG_REASON_NOTHALTED
;
947 target
->state
= TARGET_RUNNING
;
951 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
952 " nvic_icsr = 0x%" PRIx32
,
953 cortex_m3
->dcb_dhcsr
, cortex_m3
->nvic_icsr
);
955 retval
= cortex_m3_debug_entry(target
);
956 if (retval
!= ERROR_OK
)
958 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
960 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
961 " nvic_icsr = 0x%" PRIx32
,
962 cortex_m3
->dcb_dhcsr
, cortex_m3
->nvic_icsr
);
967 static int cortex_m3_assert_reset(struct target
*target
)
969 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
970 struct adiv5_dap
*swjdp
= cortex_m3
->armv7m
.arm
.dap
;
971 enum cortex_m3_soft_reset_config reset_config
= cortex_m3
->soft_reset_config
;
973 LOG_DEBUG("target->state: %s",
974 target_state_name(target
));
976 enum reset_types jtag_reset_config
= jtag_get_reset_config();
978 if (target_has_event_action(target
, TARGET_EVENT_RESET_ASSERT
)) {
979 /* allow scripts to override the reset event */
981 target_handle_event(target
, TARGET_EVENT_RESET_ASSERT
);
982 register_cache_invalidate(cortex_m3
->armv7m
.core_cache
);
983 target
->state
= TARGET_RESET
;
988 /* some cores support connecting while srst is asserted
989 * use that mode is it has been configured */
991 bool srst_asserted
= false;
993 if (jtag_reset_config
& RESET_SRST_NO_GATING
) {
994 adapter_assert_reset();
995 srst_asserted
= true;
998 /* Enable debug requests */
1000 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
1001 if (retval
!= ERROR_OK
)
1003 if (!(cortex_m3
->dcb_dhcsr
& C_DEBUGEN
)) {
1004 retval
= mem_ap_write_u32(swjdp
, DCB_DHCSR
, DBGKEY
| C_DEBUGEN
);
1005 if (retval
!= ERROR_OK
)
1009 /* If the processor is sleeping in a WFI or WFE instruction, the
1010 * C_HALT bit must be asserted to regain control */
1011 if (cortex_m3
->dcb_dhcsr
& S_SLEEP
) {
1012 retval
= mem_ap_write_u32(swjdp
, DCB_DHCSR
, DBGKEY
| C_HALT
| C_DEBUGEN
);
1013 if (retval
!= ERROR_OK
)
1017 retval
= mem_ap_write_u32(swjdp
, DCB_DCRDR
, 0);
1018 if (retval
!= ERROR_OK
)
1021 if (!target
->reset_halt
) {
1022 /* Set/Clear C_MASKINTS in a separate operation */
1023 if (cortex_m3
->dcb_dhcsr
& C_MASKINTS
) {
1024 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
,
1025 DBGKEY
| C_DEBUGEN
| C_HALT
);
1026 if (retval
!= ERROR_OK
)
1030 /* clear any debug flags before resuming */
1031 cortex_m3_clear_halt(target
);
1033 /* clear C_HALT in dhcsr reg */
1034 cortex_m3_write_debug_halt_mask(target
, 0, C_HALT
);
1036 /* Halt in debug on reset; endreset_event() restores DEMCR.
1038 * REVISIT catching BUSERR presumably helps to defend against
1039 * bad vector table entries. Should this include MMERR or
1042 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DEMCR
,
1043 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
1044 if (retval
!= ERROR_OK
)
1048 if (jtag_reset_config
& RESET_HAS_SRST
) {
1049 /* default to asserting srst */
1051 adapter_assert_reset();
1053 /* Use a standard Cortex-M3 software reset mechanism.
1054 * We default to using VECRESET as it is supported on all current cores.
1055 * This has the disadvantage of not resetting the peripherals, so a
1056 * reset-init event handler is needed to perform any peripheral resets.
1058 retval
= mem_ap_write_atomic_u32(swjdp
, NVIC_AIRCR
,
1059 AIRCR_VECTKEY
| ((reset_config
== CORTEX_M3_RESET_SYSRESETREQ
)
1060 ? AIRCR_SYSRESETREQ
: AIRCR_VECTRESET
));
1061 if (retval
!= ERROR_OK
)
1064 LOG_DEBUG("Using Cortex-M3 %s", (reset_config
== CORTEX_M3_RESET_SYSRESETREQ
)
1065 ? "SYSRESETREQ" : "VECTRESET");
1067 if (reset_config
== CORTEX_M3_RESET_VECTRESET
) {
1068 LOG_WARNING("Only resetting the Cortex-M3 core, use a reset-init event "
1069 "handler to reset any peripherals or configure hardware srst support.");
1073 /* I do not know why this is necessary, but it
1074 * fixes strange effects (step/resume cause NMI
1075 * after reset) on LM3S6918 -- Michael Schwingen
1078 retval
= mem_ap_read_atomic_u32(swjdp
, NVIC_AIRCR
, &tmp
);
1079 if (retval
!= ERROR_OK
)
1084 target
->state
= TARGET_RESET
;
1085 jtag_add_sleep(50000);
1087 register_cache_invalidate(cortex_m3
->armv7m
.core_cache
);
1089 if (target
->reset_halt
) {
1090 retval
= target_halt(target
);
1091 if (retval
!= ERROR_OK
)
1098 static int cortex_m3_deassert_reset(struct target
*target
)
1100 LOG_DEBUG("target->state: %s",
1101 target_state_name(target
));
1103 /* deassert reset lines */
1104 adapter_deassert_reset();
1109 int cortex_m3_set_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1114 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1115 struct cortex_m3_fp_comparator
*comparator_list
= cortex_m3
->fp_comparator_list
;
1117 if (breakpoint
->set
) {
1118 LOG_WARNING("breakpoint (BPID: %d) already set", breakpoint
->unique_id
);
1122 if (cortex_m3
->auto_bp_type
)
1123 breakpoint
->type
= BKPT_TYPE_BY_ADDR(breakpoint
->address
);
1125 if (breakpoint
->type
== BKPT_HARD
) {
1126 while (comparator_list
[fp_num
].used
&& (fp_num
< cortex_m3
->fp_num_code
))
1128 if (fp_num
>= cortex_m3
->fp_num_code
) {
1129 LOG_ERROR("Can not find free FPB Comparator!");
1132 breakpoint
->set
= fp_num
+ 1;
1133 hilo
= (breakpoint
->address
& 0x2) ? FPCR_REPLACE_BKPT_HIGH
: FPCR_REPLACE_BKPT_LOW
;
1134 comparator_list
[fp_num
].used
= 1;
1135 comparator_list
[fp_num
].fpcr_value
= (breakpoint
->address
& 0x1FFFFFFC) | hilo
| 1;
1136 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
,
1137 comparator_list
[fp_num
].fpcr_value
);
1138 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32
"",
1140 comparator_list
[fp_num
].fpcr_value
);
1141 if (!cortex_m3
->fpb_enabled
) {
1142 LOG_DEBUG("FPB wasn't enabled, do it now");
1143 target_write_u32(target
, FP_CTRL
, 3);
1145 } else if (breakpoint
->type
== BKPT_SOFT
) {
1148 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
1149 * semihosting; don't use that. Otherwise the BKPT
1150 * parameter is arbitrary.
1152 buf_set_u32(code
, 0, 32, ARMV5_T_BKPT(0x11));
1153 retval
= target_read_memory(target
,
1154 breakpoint
->address
& 0xFFFFFFFE,
1155 breakpoint
->length
, 1,
1156 breakpoint
->orig_instr
);
1157 if (retval
!= ERROR_OK
)
1159 retval
= target_write_memory(target
,
1160 breakpoint
->address
& 0xFFFFFFFE,
1161 breakpoint
->length
, 1,
1163 if (retval
!= ERROR_OK
)
1165 breakpoint
->set
= true;
1168 LOG_DEBUG("BPID: %d, Type: %d, Address: 0x%08" PRIx32
" Length: %d (set=%d)",
1169 breakpoint
->unique_id
,
1170 (int)(breakpoint
->type
),
1171 breakpoint
->address
,
1178 int cortex_m3_unset_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1181 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1182 struct cortex_m3_fp_comparator
*comparator_list
= cortex_m3
->fp_comparator_list
;
1184 if (!breakpoint
->set
) {
1185 LOG_WARNING("breakpoint not set");
1189 LOG_DEBUG("BPID: %d, Type: %d, Address: 0x%08" PRIx32
" Length: %d (set=%d)",
1190 breakpoint
->unique_id
,
1191 (int)(breakpoint
->type
),
1192 breakpoint
->address
,
1196 if (breakpoint
->type
== BKPT_HARD
) {
1197 int fp_num
= breakpoint
->set
- 1;
1198 if ((fp_num
< 0) || (fp_num
>= cortex_m3
->fp_num_code
)) {
1199 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1202 comparator_list
[fp_num
].used
= 0;
1203 comparator_list
[fp_num
].fpcr_value
= 0;
1204 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
,
1205 comparator_list
[fp_num
].fpcr_value
);
1207 /* restore original instruction (kept in target endianness) */
1208 if (breakpoint
->length
== 4) {
1209 retval
= target_write_memory(target
, breakpoint
->address
& 0xFFFFFFFE, 4, 1,
1210 breakpoint
->orig_instr
);
1211 if (retval
!= ERROR_OK
)
1214 retval
= target_write_memory(target
, breakpoint
->address
& 0xFFFFFFFE, 2, 1,
1215 breakpoint
->orig_instr
);
1216 if (retval
!= ERROR_OK
)
1220 breakpoint
->set
= false;
1225 int cortex_m3_add_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1227 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1229 if (cortex_m3
->auto_bp_type
) {
1230 breakpoint
->type
= BKPT_TYPE_BY_ADDR(breakpoint
->address
);
1231 #ifdef ARMV7_GDB_HACKS
1232 if (breakpoint
->length
!= 2) {
1233 /* XXX Hack: Replace all breakpoints with length != 2 with
1234 * a hardware breakpoint. */
1235 breakpoint
->type
= BKPT_HARD
;
1236 breakpoint
->length
= 2;
1241 if (breakpoint
->type
!= BKPT_TYPE_BY_ADDR(breakpoint
->address
)) {
1242 if (breakpoint
->type
== BKPT_HARD
) {
1243 LOG_INFO("flash patch comparator requested outside code memory region");
1244 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1247 if (breakpoint
->type
== BKPT_SOFT
) {
1248 LOG_INFO("soft breakpoint requested in code (flash) memory region");
1249 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1253 if ((breakpoint
->type
== BKPT_HARD
) && (cortex_m3
->fp_code_available
< 1)) {
1254 LOG_INFO("no flash patch comparator unit available for hardware breakpoint");
1255 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1258 if ((breakpoint
->length
!= 2)) {
1259 LOG_INFO("only breakpoints of two bytes length supported");
1260 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1263 if (breakpoint
->type
== BKPT_HARD
)
1264 cortex_m3
->fp_code_available
--;
1266 return cortex_m3_set_breakpoint(target
, breakpoint
);
1269 int cortex_m3_remove_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1271 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1273 /* REVISIT why check? FBP can be updated with core running ... */
1274 if (target
->state
!= TARGET_HALTED
) {
1275 LOG_WARNING("target not halted");
1276 return ERROR_TARGET_NOT_HALTED
;
1279 if (cortex_m3
->auto_bp_type
)
1280 breakpoint
->type
= BKPT_TYPE_BY_ADDR(breakpoint
->address
);
1282 if (breakpoint
->set
)
1283 cortex_m3_unset_breakpoint(target
, breakpoint
);
1285 if (breakpoint
->type
== BKPT_HARD
)
1286 cortex_m3
->fp_code_available
++;
1291 int cortex_m3_set_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1294 uint32_t mask
, temp
;
1295 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1297 /* watchpoint params were validated earlier */
1299 temp
= watchpoint
->length
;
1306 /* REVISIT Don't fully trust these "not used" records ... users
1307 * may set up breakpoints by hand, e.g. dual-address data value
1308 * watchpoint using comparator #1; comparator #0 matching cycle
1309 * count; send data trace info through ITM and TPIU; etc
1311 struct cortex_m3_dwt_comparator
*comparator
;
1313 for (comparator
= cortex_m3
->dwt_comparator_list
;
1314 comparator
->used
&& dwt_num
< cortex_m3
->dwt_num_comp
;
1315 comparator
++, dwt_num
++)
1317 if (dwt_num
>= cortex_m3
->dwt_num_comp
) {
1318 LOG_ERROR("Can not find free DWT Comparator");
1321 comparator
->used
= 1;
1322 watchpoint
->set
= dwt_num
+ 1;
1324 comparator
->comp
= watchpoint
->address
;
1325 target_write_u32(target
, comparator
->dwt_comparator_address
+ 0,
1328 comparator
->mask
= mask
;
1329 target_write_u32(target
, comparator
->dwt_comparator_address
+ 4,
1332 switch (watchpoint
->rw
) {
1334 comparator
->function
= 5;
1337 comparator
->function
= 6;
1340 comparator
->function
= 7;
1343 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1344 comparator
->function
);
1346 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1347 watchpoint
->unique_id
, dwt_num
,
1348 (unsigned) comparator
->comp
,
1349 (unsigned) comparator
->mask
,
1350 (unsigned) comparator
->function
);
1354 int cortex_m3_unset_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1356 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1357 struct cortex_m3_dwt_comparator
*comparator
;
1360 if (!watchpoint
->set
) {
1361 LOG_WARNING("watchpoint (wpid: %d) not set",
1362 watchpoint
->unique_id
);
1366 dwt_num
= watchpoint
->set
- 1;
1368 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1369 watchpoint
->unique_id
, dwt_num
,
1370 (unsigned) watchpoint
->address
);
1372 if ((dwt_num
< 0) || (dwt_num
>= cortex_m3
->dwt_num_comp
)) {
1373 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1377 comparator
= cortex_m3
->dwt_comparator_list
+ dwt_num
;
1378 comparator
->used
= 0;
1379 comparator
->function
= 0;
1380 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1381 comparator
->function
);
1383 watchpoint
->set
= false;
1388 int cortex_m3_add_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1390 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1392 if (cortex_m3
->dwt_comp_available
< 1) {
1393 LOG_DEBUG("no comparators?");
1394 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1397 /* hardware doesn't support data value masking */
1398 if (watchpoint
->mask
!= ~(uint32_t)0) {
1399 LOG_DEBUG("watchpoint value masks not supported");
1400 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1403 /* hardware allows address masks of up to 32K */
1406 for (mask
= 0; mask
< 16; mask
++) {
1407 if ((1u << mask
) == watchpoint
->length
)
1411 LOG_DEBUG("unsupported watchpoint length");
1412 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1414 if (watchpoint
->address
& ((1 << mask
) - 1)) {
1415 LOG_DEBUG("watchpoint address is unaligned");
1416 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1419 /* Caller doesn't seem to be able to describe watching for data
1420 * values of zero; that flags "no value".
1422 * REVISIT This DWT may well be able to watch for specific data
1423 * values. Requires comparator #1 to set DATAVMATCH and match
1424 * the data, and another comparator (DATAVADDR0) matching addr.
1426 if (watchpoint
->value
) {
1427 LOG_DEBUG("data value watchpoint not YET supported");
1428 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1431 cortex_m3
->dwt_comp_available
--;
1432 LOG_DEBUG("dwt_comp_available: %d", cortex_m3
->dwt_comp_available
);
1437 int cortex_m3_remove_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1439 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1441 /* REVISIT why check? DWT can be updated with core running ... */
1442 if (target
->state
!= TARGET_HALTED
) {
1443 LOG_WARNING("target not halted");
1444 return ERROR_TARGET_NOT_HALTED
;
1447 if (watchpoint
->set
)
1448 cortex_m3_unset_watchpoint(target
, watchpoint
);
1450 cortex_m3
->dwt_comp_available
++;
1451 LOG_DEBUG("dwt_comp_available: %d", cortex_m3
->dwt_comp_available
);
1456 void cortex_m3_enable_watchpoints(struct target
*target
)
1458 struct watchpoint
*watchpoint
= target
->watchpoints
;
1460 /* set any pending watchpoints */
1461 while (watchpoint
) {
1462 if (!watchpoint
->set
)
1463 cortex_m3_set_watchpoint(target
, watchpoint
);
1464 watchpoint
= watchpoint
->next
;
1468 static int cortex_m3_load_core_reg_u32(struct target
*target
,
1469 enum armv7m_regtype type
, uint32_t num
, uint32_t *value
)
1472 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1473 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
1475 /* NOTE: we "know" here that the register identifiers used
1476 * in the v7m header match the Cortex-M3 Debug Core Register
1477 * Selector values for R0..R15, xPSR, MSP, and PSP.
1481 /* read a normal core register */
1482 retval
= cortexm3_dap_read_coreregister_u32(swjdp
, value
, num
);
1484 if (retval
!= ERROR_OK
) {
1485 LOG_ERROR("JTAG failure %i", retval
);
1486 return ERROR_JTAG_DEVICE_ERROR
;
1488 LOG_DEBUG("load from core reg %i value 0x%" PRIx32
"", (int)num
, *value
);
1491 case ARMV7M_PRIMASK
:
1492 case ARMV7M_BASEPRI
:
1493 case ARMV7M_FAULTMASK
:
1494 case ARMV7M_CONTROL
:
1495 /* Cortex-M3 packages these four registers as bitfields
1496 * in one Debug Core register. So say r0 and r2 docs;
1497 * it was removed from r1 docs, but still works.
1499 cortexm3_dap_read_coreregister_u32(swjdp
, value
, 20);
1502 case ARMV7M_PRIMASK
:
1503 *value
= buf_get_u32((uint8_t *)value
, 0, 1);
1506 case ARMV7M_BASEPRI
:
1507 *value
= buf_get_u32((uint8_t *)value
, 8, 8);
1510 case ARMV7M_FAULTMASK
:
1511 *value
= buf_get_u32((uint8_t *)value
, 16, 1);
1514 case ARMV7M_CONTROL
:
1515 *value
= buf_get_u32((uint8_t *)value
, 24, 2);
1519 LOG_DEBUG("load from special reg %i value 0x%" PRIx32
"", (int)num
, *value
);
1523 return ERROR_COMMAND_SYNTAX_ERROR
;
1529 static int cortex_m3_store_core_reg_u32(struct target
*target
,
1530 enum armv7m_regtype type
, uint32_t num
, uint32_t value
)
1534 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1535 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
1537 #ifdef ARMV7_GDB_HACKS
1538 /* If the LR register is being modified, make sure it will put us
1539 * in "thumb" mode, or an INVSTATE exception will occur. This is a
1540 * hack to deal with the fact that gdb will sometimes "forge"
1541 * return addresses, and doesn't set the LSB correctly (i.e., when
1542 * printing expressions containing function calls, it sets LR = 0.)
1543 * Valid exception return codes have bit 0 set too.
1545 if (num
== ARMV7M_R14
)
1549 /* NOTE: we "know" here that the register identifiers used
1550 * in the v7m header match the Cortex-M3 Debug Core Register
1551 * Selector values for R0..R15, xPSR, MSP, and PSP.
1555 retval
= cortexm3_dap_write_coreregister_u32(swjdp
, value
, num
);
1556 if (retval
!= ERROR_OK
) {
1559 LOG_ERROR("JTAG failure");
1560 r
= armv7m
->core_cache
->reg_list
+ num
;
1561 r
->dirty
= r
->valid
;
1562 return ERROR_JTAG_DEVICE_ERROR
;
1564 LOG_DEBUG("write core reg %i value 0x%" PRIx32
"", (int)num
, value
);
1567 case ARMV7M_PRIMASK
:
1568 case ARMV7M_BASEPRI
:
1569 case ARMV7M_FAULTMASK
:
1570 case ARMV7M_CONTROL
:
1571 /* Cortex-M3 packages these four registers as bitfields
1572 * in one Debug Core register. So say r0 and r2 docs;
1573 * it was removed from r1 docs, but still works.
1575 cortexm3_dap_read_coreregister_u32(swjdp
, ®
, 20);
1578 case ARMV7M_PRIMASK
:
1579 buf_set_u32((uint8_t *)®
, 0, 1, value
);
1582 case ARMV7M_BASEPRI
:
1583 buf_set_u32((uint8_t *)®
, 8, 8, value
);
1586 case ARMV7M_FAULTMASK
:
1587 buf_set_u32((uint8_t *)®
, 16, 1, value
);
1590 case ARMV7M_CONTROL
:
1591 buf_set_u32((uint8_t *)®
, 24, 2, value
);
1595 cortexm3_dap_write_coreregister_u32(swjdp
, reg
, 20);
1597 LOG_DEBUG("write special reg %i value 0x%" PRIx32
" ", (int)num
, value
);
1601 return ERROR_COMMAND_SYNTAX_ERROR
;
1607 static int cortex_m3_read_memory(struct target
*target
, uint32_t address
,
1608 uint32_t size
, uint32_t count
, uint8_t *buffer
)
1610 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1611 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
1612 int retval
= ERROR_COMMAND_SYNTAX_ERROR
;
1614 if (armv7m
->arm
.is_armv6m
) {
1615 /* armv6m does not handle unaligned memory access */
1616 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
1617 return ERROR_TARGET_UNALIGNED_ACCESS
;
1620 /* cortex_m3 handles unaligned memory access */
1621 if (count
&& buffer
) {
1624 retval
= mem_ap_read_buf_u32(swjdp
, buffer
, 4 * count
, address
);
1627 retval
= mem_ap_read_buf_u16(swjdp
, buffer
, 2 * count
, address
);
1630 retval
= mem_ap_read_buf_u8(swjdp
, buffer
, count
, address
);
1638 static int cortex_m3_write_memory(struct target
*target
, uint32_t address
,
1639 uint32_t size
, uint32_t count
, const uint8_t *buffer
)
1641 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1642 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
1643 int retval
= ERROR_COMMAND_SYNTAX_ERROR
;
1645 if (armv7m
->arm
.is_armv6m
) {
1646 /* armv6m does not handle unaligned memory access */
1647 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
1648 return ERROR_TARGET_UNALIGNED_ACCESS
;
1651 if (count
&& buffer
) {
1654 retval
= mem_ap_write_buf_u32(swjdp
, buffer
, 4 * count
, address
);
1657 retval
= mem_ap_write_buf_u16(swjdp
, buffer
, 2 * count
, address
);
1660 retval
= mem_ap_write_buf_u8(swjdp
, buffer
, count
, address
);
1668 static int cortex_m3_bulk_write_memory(struct target
*target
, uint32_t address
,
1669 uint32_t count
, const uint8_t *buffer
)
1671 return cortex_m3_write_memory(target
, address
, 4, count
, buffer
);
1674 static int cortex_m3_init_target(struct command_context
*cmd_ctx
,
1675 struct target
*target
)
1677 armv7m_build_reg_cache(target
);
1681 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1682 * on r/w if the core is not running, and clear on resume or reset ... or
1683 * at least, in a post_restore_context() method.
1686 struct dwt_reg_state
{
1687 struct target
*target
;
1689 uint32_t value
; /* scratch/cache */
1692 static int cortex_m3_dwt_get_reg(struct reg
*reg
)
1694 struct dwt_reg_state
*state
= reg
->arch_info
;
1696 return target_read_u32(state
->target
, state
->addr
, &state
->value
);
1699 static int cortex_m3_dwt_set_reg(struct reg
*reg
, uint8_t *buf
)
1701 struct dwt_reg_state
*state
= reg
->arch_info
;
1703 return target_write_u32(state
->target
, state
->addr
,
1704 buf_get_u32(buf
, 0, reg
->size
));
1713 static struct dwt_reg dwt_base_regs
[] = {
1714 { DWT_CTRL
, "dwt_ctrl", 32, },
1715 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1716 * increments while the core is asleep.
1718 { DWT_CYCCNT
, "dwt_cyccnt", 32, },
1719 /* plus some 8 bit counters, useful for profiling with TPIU */
1722 static struct dwt_reg dwt_comp
[] = {
1723 #define DWT_COMPARATOR(i) \
1724 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1725 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1726 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1731 #undef DWT_COMPARATOR
1734 static const struct reg_arch_type dwt_reg_type
= {
1735 .get
= cortex_m3_dwt_get_reg
,
1736 .set
= cortex_m3_dwt_set_reg
,
1739 static void cortex_m3_dwt_addreg(struct target
*t
, struct reg
*r
, struct dwt_reg
*d
)
1741 struct dwt_reg_state
*state
;
1743 state
= calloc(1, sizeof *state
);
1746 state
->addr
= d
->addr
;
1751 r
->value
= &state
->value
;
1752 r
->arch_info
= state
;
1753 r
->type
= &dwt_reg_type
;
1756 void cortex_m3_dwt_setup(struct cortex_m3_common
*cm3
, struct target
*target
)
1759 struct reg_cache
*cache
;
1760 struct cortex_m3_dwt_comparator
*comparator
;
1763 target_read_u32(target
, DWT_CTRL
, &dwtcr
);
1765 LOG_DEBUG("no DWT");
1769 cm3
->dwt_num_comp
= (dwtcr
>> 28) & 0xF;
1770 cm3
->dwt_comp_available
= cm3
->dwt_num_comp
;
1771 cm3
->dwt_comparator_list
= calloc(cm3
->dwt_num_comp
,
1772 sizeof(struct cortex_m3_dwt_comparator
));
1773 if (!cm3
->dwt_comparator_list
) {
1775 cm3
->dwt_num_comp
= 0;
1776 LOG_ERROR("out of mem");
1780 cache
= calloc(1, sizeof *cache
);
1783 free(cm3
->dwt_comparator_list
);
1786 cache
->name
= "cortex-m3 dwt registers";
1787 cache
->num_regs
= 2 + cm3
->dwt_num_comp
* 3;
1788 cache
->reg_list
= calloc(cache
->num_regs
, sizeof *cache
->reg_list
);
1789 if (!cache
->reg_list
) {
1794 for (reg
= 0; reg
< 2; reg
++)
1795 cortex_m3_dwt_addreg(target
, cache
->reg_list
+ reg
,
1796 dwt_base_regs
+ reg
);
1798 comparator
= cm3
->dwt_comparator_list
;
1799 for (i
= 0; i
< cm3
->dwt_num_comp
; i
++, comparator
++) {
1802 comparator
->dwt_comparator_address
= DWT_COMP0
+ 0x10 * i
;
1803 for (j
= 0; j
< 3; j
++, reg
++)
1804 cortex_m3_dwt_addreg(target
, cache
->reg_list
+ reg
,
1805 dwt_comp
+ 3 * i
+ j
);
1808 *register_get_last_cache_p(&target
->reg_cache
) = cache
;
1809 cm3
->dwt_cache
= cache
;
1811 LOG_DEBUG("DWT dwtcr 0x%" PRIx32
", comp %d, watch%s",
1812 dwtcr
, cm3
->dwt_num_comp
,
1813 (dwtcr
& (0xf << 24)) ? " only" : "/trigger");
1815 /* REVISIT: if num_comp > 1, check whether comparator #1 can
1816 * implement single-address data value watchpoints ... so we
1817 * won't need to check it later, when asked to set one up.
1821 #define MVFR0 0xe000ef40
1822 #define MVFR1 0xe000ef44
1824 #define MVFR0_DEFAULT_M4 0x10110021
1825 #define MVFR1_DEFAULT_M4 0x11000011
1827 int cortex_m3_examine(struct target
*target
)
1830 uint32_t cpuid
, fpcr
, mvfr0
, mvfr1
;
1832 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1833 struct adiv5_dap
*swjdp
= cortex_m3
->armv7m
.arm
.dap
;
1834 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1836 /* stlink shares the examine handler but does not support
1838 if (!armv7m
->stlink
) {
1839 retval
= ahbap_debugport_init(swjdp
);
1840 if (retval
!= ERROR_OK
)
1844 if (!target_was_examined(target
)) {
1845 target_set_examined(target
);
1847 /* Read from Device Identification Registers */
1848 retval
= target_read_u32(target
, CPUID
, &cpuid
);
1849 if (retval
!= ERROR_OK
)
1853 i
= (cpuid
>> 4) & 0xf;
1855 LOG_DEBUG("Cortex-M%d r%" PRId8
"p%" PRId8
" processor detected",
1856 i
, (uint8_t)((cpuid
>> 20) & 0xf), (uint8_t)((cpuid
>> 0) & 0xf));
1857 LOG_DEBUG("cpuid: 0x%8.8" PRIx32
"", cpuid
);
1859 /* test for floating point feature on cortex-m4 */
1861 target_read_u32(target
, MVFR0
, &mvfr0
);
1862 target_read_u32(target
, MVFR1
, &mvfr1
);
1864 if ((mvfr0
== MVFR0_DEFAULT_M4
) && (mvfr1
== MVFR1_DEFAULT_M4
)) {
1865 LOG_DEBUG("Cortex-M%d floating point feature FPv4_SP found", i
);
1866 armv7m
->fp_feature
= FPv4_SP
;
1868 } else if (i
== 0) {
1869 /* Cortex-M0 does not support unaligned memory access */
1870 armv7m
->arm
.is_armv6m
= true;
1873 if (i
== 4 || i
== 3) {
1874 /* Cortex-M3/M4 has 4096 bytes autoincrement range */
1875 armv7m
->dap
.tar_autoincr_block
= (1 << 12);
1878 /* NOTE: FPB and DWT are both optional. */
1881 target_read_u32(target
, FP_CTRL
, &fpcr
);
1882 cortex_m3
->auto_bp_type
= 1;
1883 cortex_m3
->fp_num_code
= ((fpcr
>> 8) & 0x70) | ((fpcr
>> 4) & 0xF); /* bits
1887 cortex_m3
->fp_num_lit
= (fpcr
>> 8) & 0xF;
1888 cortex_m3
->fp_code_available
= cortex_m3
->fp_num_code
;
1889 cortex_m3
->fp_comparator_list
= calloc(
1890 cortex_m3
->fp_num_code
+ cortex_m3
->fp_num_lit
,
1891 sizeof(struct cortex_m3_fp_comparator
));
1892 cortex_m3
->fpb_enabled
= fpcr
& 1;
1893 for (i
= 0; i
< cortex_m3
->fp_num_code
+ cortex_m3
->fp_num_lit
; i
++) {
1894 cortex_m3
->fp_comparator_list
[i
].type
=
1895 (i
< cortex_m3
->fp_num_code
) ? FPCR_CODE
: FPCR_LITERAL
;
1896 cortex_m3
->fp_comparator_list
[i
].fpcr_address
= FP_COMP0
+ 4 * i
;
1898 LOG_DEBUG("FPB fpcr 0x%" PRIx32
", numcode %i, numlit %i",
1900 cortex_m3
->fp_num_code
,
1901 cortex_m3
->fp_num_lit
);
1904 cortex_m3_dwt_setup(cortex_m3
, target
);
1906 /* These hardware breakpoints only work for code in flash! */
1907 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
1908 target_name(target
),
1909 cortex_m3
->fp_num_code
,
1910 cortex_m3
->dwt_num_comp
);
1916 static int cortex_m3_dcc_read(struct adiv5_dap
*swjdp
, uint8_t *value
, uint8_t *ctrl
)
1921 mem_ap_read_buf_u16(swjdp
, (uint8_t *)&dcrdr
, 1, DCB_DCRDR
);
1922 *ctrl
= (uint8_t)dcrdr
;
1923 *value
= (uint8_t)(dcrdr
>> 8);
1925 LOG_DEBUG("data 0x%x ctrl 0x%x", *value
, *ctrl
);
1927 /* write ack back to software dcc register
1928 * signify we have read data */
1929 if (dcrdr
& (1 << 0)) {
1931 retval
= mem_ap_write_buf_u16(swjdp
, (uint8_t *)&dcrdr
, 1, DCB_DCRDR
);
1932 if (retval
!= ERROR_OK
)
1939 static int cortex_m3_target_request_data(struct target
*target
,
1940 uint32_t size
, uint8_t *buffer
)
1942 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1943 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
1948 for (i
= 0; i
< (size
* 4); i
++) {
1949 cortex_m3_dcc_read(swjdp
, &data
, &ctrl
);
1956 static int cortex_m3_handle_target_request(void *priv
)
1958 struct target
*target
= priv
;
1959 if (!target_was_examined(target
))
1961 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1962 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
1964 if (!target
->dbg_msg_enabled
)
1967 if (target
->state
== TARGET_RUNNING
) {
1971 cortex_m3_dcc_read(swjdp
, &data
, &ctrl
);
1973 /* check if we have data */
1974 if (ctrl
& (1 << 0)) {
1977 /* we assume target is quick enough */
1979 cortex_m3_dcc_read(swjdp
, &data
, &ctrl
);
1980 request
|= (data
<< 8);
1981 cortex_m3_dcc_read(swjdp
, &data
, &ctrl
);
1982 request
|= (data
<< 16);
1983 cortex_m3_dcc_read(swjdp
, &data
, &ctrl
);
1984 request
|= (data
<< 24);
1985 target_request(target
, request
);
1992 static int cortex_m3_init_arch_info(struct target
*target
,
1993 struct cortex_m3_common
*cortex_m3
, struct jtag_tap
*tap
)
1996 struct armv7m_common
*armv7m
= &cortex_m3
->armv7m
;
1998 armv7m_init_arch_info(target
, armv7m
);
2000 /* prepare JTAG information for the new target */
2001 cortex_m3
->jtag_info
.tap
= tap
;
2002 cortex_m3
->jtag_info
.scann_size
= 4;
2004 /* default reset mode is to use srst if fitted
2005 * if not it will use CORTEX_M3_RESET_VECTRESET */
2006 cortex_m3
->soft_reset_config
= CORTEX_M3_RESET_VECTRESET
;
2008 armv7m
->arm
.dap
= &armv7m
->dap
;
2010 /* Leave (only) generic DAP stuff for debugport_init(); */
2011 armv7m
->dap
.jtag_info
= &cortex_m3
->jtag_info
;
2012 armv7m
->dap
.memaccess_tck
= 8;
2014 /* Cortex-M3/M4 has 4096 bytes autoincrement range
2015 * but set a safe default to 1024 to support Cortex-M0
2016 * this will be changed in cortex_m3_examine if a M3/M4 is detected */
2017 armv7m
->dap
.tar_autoincr_block
= (1 << 10);
2019 /* register arch-specific functions */
2020 armv7m
->examine_debug_reason
= cortex_m3_examine_debug_reason
;
2022 armv7m
->post_debug_entry
= NULL
;
2024 armv7m
->pre_restore_context
= NULL
;
2026 armv7m
->load_core_reg_u32
= cortex_m3_load_core_reg_u32
;
2027 armv7m
->store_core_reg_u32
= cortex_m3_store_core_reg_u32
;
2029 target_register_timer_callback(cortex_m3_handle_target_request
, 1, 1, target
);
2031 retval
= arm_jtag_setup_connection(&cortex_m3
->jtag_info
);
2032 if (retval
!= ERROR_OK
)
2038 static int cortex_m3_target_create(struct target
*target
, Jim_Interp
*interp
)
2040 struct cortex_m3_common
*cortex_m3
= calloc(1, sizeof(struct cortex_m3_common
));
2042 cortex_m3
->common_magic
= CORTEX_M3_COMMON_MAGIC
;
2043 cortex_m3_init_arch_info(target
, cortex_m3
, target
->tap
);
2048 /*--------------------------------------------------------------------------*/
2050 static int cortex_m3_verify_pointer(struct command_context
*cmd_ctx
,
2051 struct cortex_m3_common
*cm3
)
2053 if (cm3
->common_magic
!= CORTEX_M3_COMMON_MAGIC
) {
2054 command_print(cmd_ctx
, "target is not a Cortex-M3");
2055 return ERROR_TARGET_INVALID
;
2061 * Only stuff below this line should need to verify that its target
2062 * is a Cortex-M3. Everything else should have indirected through the
2063 * cortexm3_target structure, which is only used with CM3 targets.
2066 static const struct {
2070 { "hard_err", VC_HARDERR
, },
2071 { "int_err", VC_INTERR
, },
2072 { "bus_err", VC_BUSERR
, },
2073 { "state_err", VC_STATERR
, },
2074 { "chk_err", VC_CHKERR
, },
2075 { "nocp_err", VC_NOCPERR
, },
2076 { "mm_err", VC_MMERR
, },
2077 { "reset", VC_CORERESET
, },
2080 COMMAND_HANDLER(handle_cortex_m3_vector_catch_command
)
2082 struct target
*target
= get_current_target(CMD_CTX
);
2083 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
2084 struct armv7m_common
*armv7m
= &cortex_m3
->armv7m
;
2085 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
2089 retval
= cortex_m3_verify_pointer(CMD_CTX
, cortex_m3
);
2090 if (retval
!= ERROR_OK
)
2093 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DEMCR
, &demcr
);
2094 if (retval
!= ERROR_OK
)
2100 if (CMD_ARGC
== 1) {
2101 if (strcmp(CMD_ARGV
[0], "all") == 0) {
2102 catch = VC_HARDERR
| VC_INTERR
| VC_BUSERR
2103 | VC_STATERR
| VC_CHKERR
| VC_NOCPERR
2104 | VC_MMERR
| VC_CORERESET
;
2106 } else if (strcmp(CMD_ARGV
[0], "none") == 0)
2109 while (CMD_ARGC
-- > 0) {
2111 for (i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++) {
2112 if (strcmp(CMD_ARGV
[CMD_ARGC
], vec_ids
[i
].name
) != 0)
2114 catch |= vec_ids
[i
].mask
;
2117 if (i
== ARRAY_SIZE(vec_ids
)) {
2118 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV
[CMD_ARGC
]);
2119 return ERROR_COMMAND_SYNTAX_ERROR
;
2123 /* For now, armv7m->demcr only stores vector catch flags. */
2124 armv7m
->demcr
= catch;
2129 /* write, but don't assume it stuck (why not??) */
2130 retval
= mem_ap_write_u32(swjdp
, DCB_DEMCR
, demcr
);
2131 if (retval
!= ERROR_OK
)
2133 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DEMCR
, &demcr
);
2134 if (retval
!= ERROR_OK
)
2137 /* FIXME be sure to clear DEMCR on clean server shutdown.
2138 * Otherwise the vector catch hardware could fire when there's
2139 * no debugger hooked up, causing much confusion...
2143 for (unsigned i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++) {
2144 command_print(CMD_CTX
, "%9s: %s", vec_ids
[i
].name
,
2145 (demcr
& vec_ids
[i
].mask
) ? "catch" : "ignore");
2151 COMMAND_HANDLER(handle_cortex_m3_mask_interrupts_command
)
2153 struct target
*target
= get_current_target(CMD_CTX
);
2154 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
2157 static const Jim_Nvp nvp_maskisr_modes
[] = {
2158 { .name
= "auto", .value
= CORTEX_M3_ISRMASK_AUTO
},
2159 { .name
= "off", .value
= CORTEX_M3_ISRMASK_OFF
},
2160 { .name
= "on", .value
= CORTEX_M3_ISRMASK_ON
},
2161 { .name
= NULL
, .value
= -1 },
2166 retval
= cortex_m3_verify_pointer(CMD_CTX
, cortex_m3
);
2167 if (retval
!= ERROR_OK
)
2170 if (target
->state
!= TARGET_HALTED
) {
2171 command_print(CMD_CTX
, "target must be stopped for \"%s\" command", CMD_NAME
);
2176 n
= Jim_Nvp_name2value_simple(nvp_maskisr_modes
, CMD_ARGV
[0]);
2177 if (n
->name
== NULL
)
2178 return ERROR_COMMAND_SYNTAX_ERROR
;
2179 cortex_m3
->isrmasking_mode
= n
->value
;
2182 if (cortex_m3
->isrmasking_mode
== CORTEX_M3_ISRMASK_ON
)
2183 cortex_m3_write_debug_halt_mask(target
, C_HALT
| C_MASKINTS
, 0);
2185 cortex_m3_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
2188 n
= Jim_Nvp_value2name_simple(nvp_maskisr_modes
, cortex_m3
->isrmasking_mode
);
2189 command_print(CMD_CTX
, "cortex_m3 interrupt mask %s", n
->name
);
2194 COMMAND_HANDLER(handle_cortex_m3_reset_config_command
)
2196 struct target
*target
= get_current_target(CMD_CTX
);
2197 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
2201 retval
= cortex_m3_verify_pointer(CMD_CTX
, cortex_m3
);
2202 if (retval
!= ERROR_OK
)
2206 if (strcmp(*CMD_ARGV
, "sysresetreq") == 0)
2207 cortex_m3
->soft_reset_config
= CORTEX_M3_RESET_SYSRESETREQ
;
2208 else if (strcmp(*CMD_ARGV
, "vectreset") == 0)
2209 cortex_m3
->soft_reset_config
= CORTEX_M3_RESET_VECTRESET
;
2212 switch (cortex_m3
->soft_reset_config
) {
2213 case CORTEX_M3_RESET_SYSRESETREQ
:
2214 reset_config
= "sysresetreq";
2217 case CORTEX_M3_RESET_VECTRESET
:
2218 reset_config
= "vectreset";
2222 reset_config
= "unknown";
2226 command_print(CMD_CTX
, "cortex_m3 reset_config %s", reset_config
);
2231 static const struct command_registration cortex_m3_exec_command_handlers
[] = {
2234 .handler
= handle_cortex_m3_mask_interrupts_command
,
2235 .mode
= COMMAND_EXEC
,
2236 .help
= "mask cortex_m3 interrupts",
2237 .usage
= "['auto'|'on'|'off']",
2240 .name
= "vector_catch",
2241 .handler
= handle_cortex_m3_vector_catch_command
,
2242 .mode
= COMMAND_EXEC
,
2243 .help
= "configure hardware vectors to trigger debug entry",
2244 .usage
= "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2247 .name
= "reset_config",
2248 .handler
= handle_cortex_m3_reset_config_command
,
2249 .mode
= COMMAND_ANY
,
2250 .help
= "configure software reset handling",
2251 .usage
= "['srst'|'sysresetreq'|'vectreset']",
2253 COMMAND_REGISTRATION_DONE
2255 static const struct command_registration cortex_m3_command_handlers
[] = {
2257 .chain
= armv7m_command_handlers
,
2260 .name
= "cortex_m3",
2261 .mode
= COMMAND_EXEC
,
2262 .help
= "Cortex-M3 command group",
2264 .chain
= cortex_m3_exec_command_handlers
,
2266 COMMAND_REGISTRATION_DONE
2269 struct target_type cortexm3_target
= {
2270 .name
= "cortex_m3",
2272 .poll
= cortex_m3_poll
,
2273 .arch_state
= armv7m_arch_state
,
2275 .target_request_data
= cortex_m3_target_request_data
,
2277 .halt
= cortex_m3_halt
,
2278 .resume
= cortex_m3_resume
,
2279 .step
= cortex_m3_step
,
2281 .assert_reset
= cortex_m3_assert_reset
,
2282 .deassert_reset
= cortex_m3_deassert_reset
,
2283 .soft_reset_halt
= cortex_m3_soft_reset_halt
,
2285 .get_gdb_reg_list
= armv7m_get_gdb_reg_list
,
2287 .read_memory
= cortex_m3_read_memory
,
2288 .write_memory
= cortex_m3_write_memory
,
2289 .bulk_write_memory
= cortex_m3_bulk_write_memory
,
2290 .checksum_memory
= armv7m_checksum_memory
,
2291 .blank_check_memory
= armv7m_blank_check_memory
,
2293 .run_algorithm
= armv7m_run_algorithm
,
2294 .start_algorithm
= armv7m_start_algorithm
,
2295 .wait_algorithm
= armv7m_wait_algorithm
,
2297 .add_breakpoint
= cortex_m3_add_breakpoint
,
2298 .remove_breakpoint
= cortex_m3_remove_breakpoint
,
2299 .add_watchpoint
= cortex_m3_add_watchpoint
,
2300 .remove_watchpoint
= cortex_m3_remove_watchpoint
,
2302 .commands
= cortex_m3_command_handlers
,
2303 .target_create
= cortex_m3_target_create
,
2304 .init_target
= cortex_m3_init_target
,
2305 .examine
= cortex_m3_examine
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)