cortex_m: declare local functions as static
[openocd.git] / src / target / cortex_m.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * Copyright (C) 2006 by Magnus Lundin *
6 * lundin@mlu.mine.nu *
7 * *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
10 * *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
15 * *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
20 * *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
23 * *
24 * *
25 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
26 * *
27 ***************************************************************************/
28 #ifdef HAVE_CONFIG_H
29 #include "config.h"
30 #endif
31
32 #include "jtag/interface.h"
33 #include "breakpoints.h"
34 #include "cortex_m.h"
35 #include "target_request.h"
36 #include "target_type.h"
37 #include "arm_disassembler.h"
38 #include "register.h"
39 #include "arm_opcodes.h"
40 #include "arm_semihosting.h"
41 #include <helper/time_support.h>
42
43 /* NOTE: most of this should work fine for the Cortex-M1 and
44 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
45 * Some differences: M0/M1 doesn't have FPB remapping or the
46 * DWT tracing/profiling support. (So the cycle counter will
47 * not be usable; the other stuff isn't currently used here.)
48 *
49 * Although there are some workarounds for errata seen only in r0p0
50 * silicon, such old parts are hard to find and thus not much tested
51 * any longer.
52 */
53
54 /* forward declarations */
55 static int cortex_m_store_core_reg_u32(struct target *target,
56 uint32_t num, uint32_t value);
57 static void cortex_m_dwt_free(struct target *target);
58
59 static int cortexm_dap_read_coreregister_u32(struct target *target,
60 uint32_t *value, int regnum)
61 {
62 struct armv7m_common *armv7m = target_to_armv7m(target);
63 int retval;
64 uint32_t dcrdr;
65
66 /* because the DCB_DCRDR is used for the emulated dcc channel
67 * we have to save/restore the DCB_DCRDR when used */
68 if (target->dbg_msg_enabled) {
69 retval = mem_ap_read_u32(armv7m->debug_ap, DCB_DCRDR, &dcrdr);
70 if (retval != ERROR_OK)
71 return retval;
72 }
73
74 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DCRSR, regnum);
75 if (retval != ERROR_OK)
76 return retval;
77
78 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DCRDR, value);
79 if (retval != ERROR_OK)
80 return retval;
81
82 if (target->dbg_msg_enabled) {
83 /* restore DCB_DCRDR - this needs to be in a separate
84 * transaction otherwise the emulated DCC channel breaks */
85 if (retval == ERROR_OK)
86 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRDR, dcrdr);
87 }
88
89 return retval;
90 }
91
92 static int cortexm_dap_write_coreregister_u32(struct target *target,
93 uint32_t value, int regnum)
94 {
95 struct armv7m_common *armv7m = target_to_armv7m(target);
96 int retval;
97 uint32_t dcrdr;
98
99 /* because the DCB_DCRDR is used for the emulated dcc channel
100 * we have to save/restore the DCB_DCRDR when used */
101 if (target->dbg_msg_enabled) {
102 retval = mem_ap_read_u32(armv7m->debug_ap, DCB_DCRDR, &dcrdr);
103 if (retval != ERROR_OK)
104 return retval;
105 }
106
107 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DCRDR, value);
108 if (retval != ERROR_OK)
109 return retval;
110
111 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRSR, regnum | DCRSR_WnR);
112 if (retval != ERROR_OK)
113 return retval;
114
115 if (target->dbg_msg_enabled) {
116 /* restore DCB_DCRDR - this needs to be in a separate
117 * transaction otherwise the emulated DCC channel breaks */
118 if (retval == ERROR_OK)
119 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRDR, dcrdr);
120 }
121
122 return retval;
123 }
124
125 static int cortex_m_write_debug_halt_mask(struct target *target,
126 uint32_t mask_on, uint32_t mask_off)
127 {
128 struct cortex_m_common *cortex_m = target_to_cm(target);
129 struct armv7m_common *armv7m = &cortex_m->armv7m;
130
131 /* mask off status bits */
132 cortex_m->dcb_dhcsr &= ~((0xFFFFul << 16) | mask_off);
133 /* create new register mask */
134 cortex_m->dcb_dhcsr |= DBGKEY | C_DEBUGEN | mask_on;
135
136 return mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DHCSR, cortex_m->dcb_dhcsr);
137 }
138
139 static int cortex_m_set_maskints(struct target *target, bool mask)
140 {
141 struct cortex_m_common *cortex_m = target_to_cm(target);
142 if (!!(cortex_m->dcb_dhcsr & C_MASKINTS) != mask)
143 return cortex_m_write_debug_halt_mask(target, mask ? C_MASKINTS : 0, mask ? 0 : C_MASKINTS);
144 else
145 return ERROR_OK;
146 }
147
148 static int cortex_m_set_maskints_for_halt(struct target *target)
149 {
150 struct cortex_m_common *cortex_m = target_to_cm(target);
151 switch (cortex_m->isrmasking_mode) {
152 case CORTEX_M_ISRMASK_AUTO:
153 /* interrupts taken at resume, whether for step or run -> no mask */
154 return cortex_m_set_maskints(target, false);
155
156 case CORTEX_M_ISRMASK_OFF:
157 /* interrupts never masked */
158 return cortex_m_set_maskints(target, false);
159
160 case CORTEX_M_ISRMASK_ON:
161 /* interrupts always masked */
162 return cortex_m_set_maskints(target, true);
163
164 case CORTEX_M_ISRMASK_STEPONLY:
165 /* interrupts masked for single step only -> mask now if MASKINTS
166 * erratum, otherwise only mask before stepping */
167 return cortex_m_set_maskints(target, cortex_m->maskints_erratum);
168 }
169 return ERROR_OK;
170 }
171
172 static int cortex_m_set_maskints_for_run(struct target *target)
173 {
174 switch (target_to_cm(target)->isrmasking_mode) {
175 case CORTEX_M_ISRMASK_AUTO:
176 /* interrupts taken at resume, whether for step or run -> no mask */
177 return cortex_m_set_maskints(target, false);
178
179 case CORTEX_M_ISRMASK_OFF:
180 /* interrupts never masked */
181 return cortex_m_set_maskints(target, false);
182
183 case CORTEX_M_ISRMASK_ON:
184 /* interrupts always masked */
185 return cortex_m_set_maskints(target, true);
186
187 case CORTEX_M_ISRMASK_STEPONLY:
188 /* interrupts masked for single step only -> no mask */
189 return cortex_m_set_maskints(target, false);
190 }
191 return ERROR_OK;
192 }
193
194 static int cortex_m_set_maskints_for_step(struct target *target)
195 {
196 switch (target_to_cm(target)->isrmasking_mode) {
197 case CORTEX_M_ISRMASK_AUTO:
198 /* the auto-interrupt should already be done -> mask */
199 return cortex_m_set_maskints(target, true);
200
201 case CORTEX_M_ISRMASK_OFF:
202 /* interrupts never masked */
203 return cortex_m_set_maskints(target, false);
204
205 case CORTEX_M_ISRMASK_ON:
206 /* interrupts always masked */
207 return cortex_m_set_maskints(target, true);
208
209 case CORTEX_M_ISRMASK_STEPONLY:
210 /* interrupts masked for single step only -> mask */
211 return cortex_m_set_maskints(target, true);
212 }
213 return ERROR_OK;
214 }
215
216 static int cortex_m_clear_halt(struct target *target)
217 {
218 struct cortex_m_common *cortex_m = target_to_cm(target);
219 struct armv7m_common *armv7m = &cortex_m->armv7m;
220 int retval;
221
222 /* clear step if any */
223 cortex_m_write_debug_halt_mask(target, C_HALT, C_STEP);
224
225 /* Read Debug Fault Status Register */
226 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_DFSR, &cortex_m->nvic_dfsr);
227 if (retval != ERROR_OK)
228 return retval;
229
230 /* Clear Debug Fault Status */
231 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, NVIC_DFSR, cortex_m->nvic_dfsr);
232 if (retval != ERROR_OK)
233 return retval;
234 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32 "", cortex_m->nvic_dfsr);
235
236 return ERROR_OK;
237 }
238
239 static int cortex_m_single_step_core(struct target *target)
240 {
241 struct cortex_m_common *cortex_m = target_to_cm(target);
242 struct armv7m_common *armv7m = &cortex_m->armv7m;
243 int retval;
244
245 /* Mask interrupts before clearing halt, if not done already. This avoids
246 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
247 * HALT can put the core into an unknown state.
248 */
249 if (!(cortex_m->dcb_dhcsr & C_MASKINTS)) {
250 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DHCSR,
251 DBGKEY | C_MASKINTS | C_HALT | C_DEBUGEN);
252 if (retval != ERROR_OK)
253 return retval;
254 }
255 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DHCSR,
256 DBGKEY | C_MASKINTS | C_STEP | C_DEBUGEN);
257 if (retval != ERROR_OK)
258 return retval;
259 LOG_DEBUG(" ");
260
261 /* restore dhcsr reg */
262 cortex_m_clear_halt(target);
263
264 return ERROR_OK;
265 }
266
267 static int cortex_m_enable_fpb(struct target *target)
268 {
269 int retval = target_write_u32(target, FP_CTRL, 3);
270 if (retval != ERROR_OK)
271 return retval;
272
273 /* check the fpb is actually enabled */
274 uint32_t fpctrl;
275 retval = target_read_u32(target, FP_CTRL, &fpctrl);
276 if (retval != ERROR_OK)
277 return retval;
278
279 if (fpctrl & 1)
280 return ERROR_OK;
281
282 return ERROR_FAIL;
283 }
284
285 static int cortex_m_endreset_event(struct target *target)
286 {
287 int i;
288 int retval;
289 uint32_t dcb_demcr;
290 struct cortex_m_common *cortex_m = target_to_cm(target);
291 struct armv7m_common *armv7m = &cortex_m->armv7m;
292 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
293 struct cortex_m_fp_comparator *fp_list = cortex_m->fp_comparator_list;
294 struct cortex_m_dwt_comparator *dwt_list = cortex_m->dwt_comparator_list;
295
296 /* REVISIT The four debug monitor bits are currently ignored... */
297 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DEMCR, &dcb_demcr);
298 if (retval != ERROR_OK)
299 return retval;
300 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32 "", dcb_demcr);
301
302 /* this register is used for emulated dcc channel */
303 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DCRDR, 0);
304 if (retval != ERROR_OK)
305 return retval;
306
307 /* Enable debug requests */
308 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
309 if (retval != ERROR_OK)
310 return retval;
311 if (!(cortex_m->dcb_dhcsr & C_DEBUGEN)) {
312 retval = cortex_m_write_debug_halt_mask(target, 0, C_HALT | C_STEP | C_MASKINTS);
313 if (retval != ERROR_OK)
314 return retval;
315 }
316
317 /* Restore proper interrupt masking setting for running CPU. */
318 cortex_m_set_maskints_for_run(target);
319
320 /* Enable features controlled by ITM and DWT blocks, and catch only
321 * the vectors we were told to pay attention to.
322 *
323 * Target firmware is responsible for all fault handling policy
324 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
325 * or manual updates to the NVIC SHCSR and CCR registers.
326 */
327 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DEMCR, TRCENA | armv7m->demcr);
328 if (retval != ERROR_OK)
329 return retval;
330
331 /* Paranoia: evidently some (early?) chips don't preserve all the
332 * debug state (including FPB, DWT, etc) across reset...
333 */
334
335 /* Enable FPB */
336 retval = cortex_m_enable_fpb(target);
337 if (retval != ERROR_OK) {
338 LOG_ERROR("Failed to enable the FPB");
339 return retval;
340 }
341
342 cortex_m->fpb_enabled = true;
343
344 /* Restore FPB registers */
345 for (i = 0; i < cortex_m->fp_num_code + cortex_m->fp_num_lit; i++) {
346 retval = target_write_u32(target, fp_list[i].fpcr_address, fp_list[i].fpcr_value);
347 if (retval != ERROR_OK)
348 return retval;
349 }
350
351 /* Restore DWT registers */
352 for (i = 0; i < cortex_m->dwt_num_comp; i++) {
353 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 0,
354 dwt_list[i].comp);
355 if (retval != ERROR_OK)
356 return retval;
357 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 4,
358 dwt_list[i].mask);
359 if (retval != ERROR_OK)
360 return retval;
361 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 8,
362 dwt_list[i].function);
363 if (retval != ERROR_OK)
364 return retval;
365 }
366 retval = dap_run(swjdp);
367 if (retval != ERROR_OK)
368 return retval;
369
370 register_cache_invalidate(armv7m->arm.core_cache);
371
372 /* make sure we have latest dhcsr flags */
373 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
374
375 return retval;
376 }
377
378 static int cortex_m_examine_debug_reason(struct target *target)
379 {
380 struct cortex_m_common *cortex_m = target_to_cm(target);
381
382 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason
383 * only check the debug reason if we don't know it already */
384
385 if ((target->debug_reason != DBG_REASON_DBGRQ)
386 && (target->debug_reason != DBG_REASON_SINGLESTEP)) {
387 if (cortex_m->nvic_dfsr & DFSR_BKPT) {
388 target->debug_reason = DBG_REASON_BREAKPOINT;
389 if (cortex_m->nvic_dfsr & DFSR_DWTTRAP)
390 target->debug_reason = DBG_REASON_WPTANDBKPT;
391 } else if (cortex_m->nvic_dfsr & DFSR_DWTTRAP)
392 target->debug_reason = DBG_REASON_WATCHPOINT;
393 else if (cortex_m->nvic_dfsr & DFSR_VCATCH)
394 target->debug_reason = DBG_REASON_BREAKPOINT;
395 else if (cortex_m->nvic_dfsr & DFSR_EXTERNAL)
396 target->debug_reason = DBG_REASON_DBGRQ;
397 else /* HALTED */
398 target->debug_reason = DBG_REASON_UNDEFINED;
399 }
400
401 return ERROR_OK;
402 }
403
404 static int cortex_m_examine_exception_reason(struct target *target)
405 {
406 uint32_t shcsr = 0, except_sr = 0, cfsr = -1, except_ar = -1;
407 struct armv7m_common *armv7m = target_to_armv7m(target);
408 struct adiv5_dap *swjdp = armv7m->arm.dap;
409 int retval;
410
411 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_SHCSR, &shcsr);
412 if (retval != ERROR_OK)
413 return retval;
414 switch (armv7m->exception_number) {
415 case 2: /* NMI */
416 break;
417 case 3: /* Hard Fault */
418 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_HFSR, &except_sr);
419 if (retval != ERROR_OK)
420 return retval;
421 if (except_sr & 0x40000000) {
422 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &cfsr);
423 if (retval != ERROR_OK)
424 return retval;
425 }
426 break;
427 case 4: /* Memory Management */
428 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &except_sr);
429 if (retval != ERROR_OK)
430 return retval;
431 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_MMFAR, &except_ar);
432 if (retval != ERROR_OK)
433 return retval;
434 break;
435 case 5: /* Bus Fault */
436 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &except_sr);
437 if (retval != ERROR_OK)
438 return retval;
439 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_BFAR, &except_ar);
440 if (retval != ERROR_OK)
441 return retval;
442 break;
443 case 6: /* Usage Fault */
444 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &except_sr);
445 if (retval != ERROR_OK)
446 return retval;
447 break;
448 case 7: /* Secure Fault */
449 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_SFSR, &except_sr);
450 if (retval != ERROR_OK)
451 return retval;
452 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_SFAR, &except_ar);
453 if (retval != ERROR_OK)
454 return retval;
455 break;
456 case 11: /* SVCall */
457 break;
458 case 12: /* Debug Monitor */
459 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_DFSR, &except_sr);
460 if (retval != ERROR_OK)
461 return retval;
462 break;
463 case 14: /* PendSV */
464 break;
465 case 15: /* SysTick */
466 break;
467 default:
468 except_sr = 0;
469 break;
470 }
471 retval = dap_run(swjdp);
472 if (retval == ERROR_OK)
473 LOG_DEBUG("%s SHCSR 0x%" PRIx32 ", SR 0x%" PRIx32
474 ", CFSR 0x%" PRIx32 ", AR 0x%" PRIx32,
475 armv7m_exception_string(armv7m->exception_number),
476 shcsr, except_sr, cfsr, except_ar);
477 return retval;
478 }
479
480 static int cortex_m_debug_entry(struct target *target)
481 {
482 int i;
483 uint32_t xPSR;
484 int retval;
485 struct cortex_m_common *cortex_m = target_to_cm(target);
486 struct armv7m_common *armv7m = &cortex_m->armv7m;
487 struct arm *arm = &armv7m->arm;
488 struct reg *r;
489
490 LOG_DEBUG(" ");
491
492 /* Do this really early to minimize the window where the MASKINTS erratum
493 * can pile up pending interrupts. */
494 cortex_m_set_maskints_for_halt(target);
495
496 cortex_m_clear_halt(target);
497 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
498 if (retval != ERROR_OK)
499 return retval;
500
501 retval = armv7m->examine_debug_reason(target);
502 if (retval != ERROR_OK)
503 return retval;
504
505 /* examine PE security state */
506 bool secure_state = false;
507 if (armv7m->arm.is_armv8m) {
508 uint32_t dscsr;
509
510 retval = mem_ap_read_u32(armv7m->debug_ap, DCB_DSCSR, &dscsr);
511 if (retval != ERROR_OK)
512 return retval;
513
514 secure_state = (dscsr & DSCSR_CDS) == DSCSR_CDS;
515 }
516
517 /* Examine target state and mode
518 * First load register accessible through core debug port */
519 int num_regs = arm->core_cache->num_regs;
520
521 for (i = 0; i < num_regs; i++) {
522 r = &armv7m->arm.core_cache->reg_list[i];
523 if (!r->valid)
524 arm->read_core_reg(target, r, i, ARM_MODE_ANY);
525 }
526
527 r = arm->cpsr;
528 xPSR = buf_get_u32(r->value, 0, 32);
529
530 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
531 if (xPSR & 0xf00) {
532 r->dirty = r->valid;
533 cortex_m_store_core_reg_u32(target, 16, xPSR & ~0xff);
534 }
535
536 /* Are we in an exception handler */
537 if (xPSR & 0x1FF) {
538 armv7m->exception_number = (xPSR & 0x1FF);
539
540 arm->core_mode = ARM_MODE_HANDLER;
541 arm->map = armv7m_msp_reg_map;
542 } else {
543 unsigned control = buf_get_u32(arm->core_cache
544 ->reg_list[ARMV7M_CONTROL].value, 0, 3);
545
546 /* is this thread privileged? */
547 arm->core_mode = control & 1
548 ? ARM_MODE_USER_THREAD
549 : ARM_MODE_THREAD;
550
551 /* which stack is it using? */
552 if (control & 2)
553 arm->map = armv7m_psp_reg_map;
554 else
555 arm->map = armv7m_msp_reg_map;
556
557 armv7m->exception_number = 0;
558 }
559
560 if (armv7m->exception_number)
561 cortex_m_examine_exception_reason(target);
562
563 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32 ", cpu in %s state, target->state: %s",
564 arm_mode_name(arm->core_mode),
565 buf_get_u32(arm->pc->value, 0, 32),
566 secure_state ? "Secure" : "Non-Secure",
567 target_state_name(target));
568
569 if (armv7m->post_debug_entry) {
570 retval = armv7m->post_debug_entry(target);
571 if (retval != ERROR_OK)
572 return retval;
573 }
574
575 return ERROR_OK;
576 }
577
578 static int cortex_m_poll(struct target *target)
579 {
580 int detected_failure = ERROR_OK;
581 int retval = ERROR_OK;
582 enum target_state prev_target_state = target->state;
583 struct cortex_m_common *cortex_m = target_to_cm(target);
584 struct armv7m_common *armv7m = &cortex_m->armv7m;
585
586 /* Read from Debug Halting Control and Status Register */
587 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
588 if (retval != ERROR_OK) {
589 target->state = TARGET_UNKNOWN;
590 return retval;
591 }
592
593 /* Recover from lockup. See ARMv7-M architecture spec,
594 * section B1.5.15 "Unrecoverable exception cases".
595 */
596 if (cortex_m->dcb_dhcsr & S_LOCKUP) {
597 LOG_ERROR("%s -- clearing lockup after double fault",
598 target_name(target));
599 cortex_m_write_debug_halt_mask(target, C_HALT, 0);
600 target->debug_reason = DBG_REASON_DBGRQ;
601
602 /* We have to execute the rest (the "finally" equivalent, but
603 * still throw this exception again).
604 */
605 detected_failure = ERROR_FAIL;
606
607 /* refresh status bits */
608 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
609 if (retval != ERROR_OK)
610 return retval;
611 }
612
613 if (cortex_m->dcb_dhcsr & S_RESET_ST) {
614 if (target->state != TARGET_RESET) {
615 target->state = TARGET_RESET;
616 LOG_INFO("%s: external reset detected", target_name(target));
617 }
618 return ERROR_OK;
619 }
620
621 if (target->state == TARGET_RESET) {
622 /* Cannot switch context while running so endreset is
623 * called with target->state == TARGET_RESET
624 */
625 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32,
626 cortex_m->dcb_dhcsr);
627 retval = cortex_m_endreset_event(target);
628 if (retval != ERROR_OK) {
629 target->state = TARGET_UNKNOWN;
630 return retval;
631 }
632 target->state = TARGET_RUNNING;
633 prev_target_state = TARGET_RUNNING;
634 }
635
636 if (cortex_m->dcb_dhcsr & S_HALT) {
637 target->state = TARGET_HALTED;
638
639 if ((prev_target_state == TARGET_RUNNING) || (prev_target_state == TARGET_RESET)) {
640 retval = cortex_m_debug_entry(target);
641 if (retval != ERROR_OK)
642 return retval;
643
644 if (arm_semihosting(target, &retval) != 0)
645 return retval;
646
647 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
648 }
649 if (prev_target_state == TARGET_DEBUG_RUNNING) {
650 LOG_DEBUG(" ");
651 retval = cortex_m_debug_entry(target);
652 if (retval != ERROR_OK)
653 return retval;
654
655 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_HALTED);
656 }
657 }
658
659 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
660 * How best to model low power modes?
661 */
662
663 if (target->state == TARGET_UNKNOWN) {
664 /* check if processor is retiring instructions */
665 if (cortex_m->dcb_dhcsr & S_RETIRE_ST) {
666 target->state = TARGET_RUNNING;
667 retval = ERROR_OK;
668 }
669 }
670
671 /* Check that target is truly halted, since the target could be resumed externally */
672 if ((prev_target_state == TARGET_HALTED) && !(cortex_m->dcb_dhcsr & S_HALT)) {
673 /* registers are now invalid */
674 register_cache_invalidate(armv7m->arm.core_cache);
675
676 target->state = TARGET_RUNNING;
677 LOG_WARNING("%s: external resume detected", target_name(target));
678 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
679 retval = ERROR_OK;
680 }
681
682 /* Did we detect a failure condition that we cleared? */
683 if (detected_failure != ERROR_OK)
684 retval = detected_failure;
685 return retval;
686 }
687
688 static int cortex_m_halt(struct target *target)
689 {
690 LOG_DEBUG("target->state: %s",
691 target_state_name(target));
692
693 if (target->state == TARGET_HALTED) {
694 LOG_DEBUG("target was already halted");
695 return ERROR_OK;
696 }
697
698 if (target->state == TARGET_UNKNOWN)
699 LOG_WARNING("target was in unknown state when halt was requested");
700
701 if (target->state == TARGET_RESET) {
702 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST) && jtag_get_srst()) {
703 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
704 return ERROR_TARGET_FAILURE;
705 } else {
706 /* we came here in a reset_halt or reset_init sequence
707 * debug entry was already prepared in cortex_m3_assert_reset()
708 */
709 target->debug_reason = DBG_REASON_DBGRQ;
710
711 return ERROR_OK;
712 }
713 }
714
715 /* Write to Debug Halting Control and Status Register */
716 cortex_m_write_debug_halt_mask(target, C_HALT, 0);
717
718 /* Do this really early to minimize the window where the MASKINTS erratum
719 * can pile up pending interrupts. */
720 cortex_m_set_maskints_for_halt(target);
721
722 target->debug_reason = DBG_REASON_DBGRQ;
723
724 return ERROR_OK;
725 }
726
727 static int cortex_m_soft_reset_halt(struct target *target)
728 {
729 struct cortex_m_common *cortex_m = target_to_cm(target);
730 struct armv7m_common *armv7m = &cortex_m->armv7m;
731 uint32_t dcb_dhcsr = 0;
732 int retval, timeout = 0;
733
734 /* on single cortex_m MCU soft_reset_halt should be avoided as same functionality
735 * can be obtained by using 'reset halt' and 'cortex_m reset_config vectreset'.
736 * As this reset only uses VC_CORERESET it would only ever reset the cortex_m
737 * core, not the peripherals */
738 LOG_DEBUG("soft_reset_halt is discouraged, please use 'reset halt' instead.");
739
740 /* Set C_DEBUGEN */
741 retval = cortex_m_write_debug_halt_mask(target, 0, C_STEP | C_MASKINTS);
742 if (retval != ERROR_OK)
743 return retval;
744
745 /* Enter debug state on reset; restore DEMCR in endreset_event() */
746 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DEMCR,
747 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
748 if (retval != ERROR_OK)
749 return retval;
750
751 /* Request a core-only reset */
752 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, NVIC_AIRCR,
753 AIRCR_VECTKEY | AIRCR_VECTRESET);
754 if (retval != ERROR_OK)
755 return retval;
756 target->state = TARGET_RESET;
757
758 /* registers are now invalid */
759 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
760
761 while (timeout < 100) {
762 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &dcb_dhcsr);
763 if (retval == ERROR_OK) {
764 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_DFSR,
765 &cortex_m->nvic_dfsr);
766 if (retval != ERROR_OK)
767 return retval;
768 if ((dcb_dhcsr & S_HALT)
769 && (cortex_m->nvic_dfsr & DFSR_VCATCH)) {
770 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
771 "DFSR 0x%08x",
772 (unsigned) dcb_dhcsr,
773 (unsigned) cortex_m->nvic_dfsr);
774 cortex_m_poll(target);
775 /* FIXME restore user's vector catch config */
776 return ERROR_OK;
777 } else
778 LOG_DEBUG("waiting for system reset-halt, "
779 "DHCSR 0x%08x, %d ms",
780 (unsigned) dcb_dhcsr, timeout);
781 }
782 timeout++;
783 alive_sleep(1);
784 }
785
786 return ERROR_OK;
787 }
788
789 void cortex_m_enable_breakpoints(struct target *target)
790 {
791 struct breakpoint *breakpoint = target->breakpoints;
792
793 /* set any pending breakpoints */
794 while (breakpoint) {
795 if (!breakpoint->set)
796 cortex_m_set_breakpoint(target, breakpoint);
797 breakpoint = breakpoint->next;
798 }
799 }
800
801 static int cortex_m_resume(struct target *target, int current,
802 target_addr_t address, int handle_breakpoints, int debug_execution)
803 {
804 struct armv7m_common *armv7m = target_to_armv7m(target);
805 struct breakpoint *breakpoint = NULL;
806 uint32_t resume_pc;
807 struct reg *r;
808
809 if (target->state != TARGET_HALTED) {
810 LOG_WARNING("target not halted");
811 return ERROR_TARGET_NOT_HALTED;
812 }
813
814 if (!debug_execution) {
815 target_free_all_working_areas(target);
816 cortex_m_enable_breakpoints(target);
817 cortex_m_enable_watchpoints(target);
818 }
819
820 if (debug_execution) {
821 r = armv7m->arm.core_cache->reg_list + ARMV7M_PRIMASK;
822
823 /* Disable interrupts */
824 /* We disable interrupts in the PRIMASK register instead of
825 * masking with C_MASKINTS. This is probably the same issue
826 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
827 * in parallel with disabled interrupts can cause local faults
828 * to not be taken.
829 *
830 * REVISIT this clearly breaks non-debug execution, since the
831 * PRIMASK register state isn't saved/restored... workaround
832 * by never resuming app code after debug execution.
833 */
834 buf_set_u32(r->value, 0, 1, 1);
835 r->dirty = true;
836 r->valid = true;
837
838 /* Make sure we are in Thumb mode */
839 r = armv7m->arm.cpsr;
840 buf_set_u32(r->value, 24, 1, 1);
841 r->dirty = true;
842 r->valid = true;
843 }
844
845 /* current = 1: continue on current pc, otherwise continue at <address> */
846 r = armv7m->arm.pc;
847 if (!current) {
848 buf_set_u32(r->value, 0, 32, address);
849 r->dirty = true;
850 r->valid = true;
851 }
852
853 /* if we halted last time due to a bkpt instruction
854 * then we have to manually step over it, otherwise
855 * the core will break again */
856
857 if (!breakpoint_find(target, buf_get_u32(r->value, 0, 32))
858 && !debug_execution)
859 armv7m_maybe_skip_bkpt_inst(target, NULL);
860
861 resume_pc = buf_get_u32(r->value, 0, 32);
862
863 armv7m_restore_context(target);
864
865 /* the front-end may request us not to handle breakpoints */
866 if (handle_breakpoints) {
867 /* Single step past breakpoint at current address */
868 breakpoint = breakpoint_find(target, resume_pc);
869 if (breakpoint) {
870 LOG_DEBUG("unset breakpoint at " TARGET_ADDR_FMT " (ID: %" PRIu32 ")",
871 breakpoint->address,
872 breakpoint->unique_id);
873 cortex_m_unset_breakpoint(target, breakpoint);
874 cortex_m_single_step_core(target);
875 cortex_m_set_breakpoint(target, breakpoint);
876 }
877 }
878
879 /* Restart core */
880 cortex_m_set_maskints_for_run(target);
881 cortex_m_write_debug_halt_mask(target, 0, C_HALT);
882
883 target->debug_reason = DBG_REASON_NOTHALTED;
884
885 /* registers are now invalid */
886 register_cache_invalidate(armv7m->arm.core_cache);
887
888 if (!debug_execution) {
889 target->state = TARGET_RUNNING;
890 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
891 LOG_DEBUG("target resumed at 0x%" PRIx32 "", resume_pc);
892 } else {
893 target->state = TARGET_DEBUG_RUNNING;
894 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
895 LOG_DEBUG("target debug resumed at 0x%" PRIx32 "", resume_pc);
896 }
897
898 return ERROR_OK;
899 }
900
901 /* int irqstepcount = 0; */
902 static int cortex_m_step(struct target *target, int current,
903 target_addr_t address, int handle_breakpoints)
904 {
905 struct cortex_m_common *cortex_m = target_to_cm(target);
906 struct armv7m_common *armv7m = &cortex_m->armv7m;
907 struct breakpoint *breakpoint = NULL;
908 struct reg *pc = armv7m->arm.pc;
909 bool bkpt_inst_found = false;
910 int retval;
911 bool isr_timed_out = false;
912
913 if (target->state != TARGET_HALTED) {
914 LOG_WARNING("target not halted");
915 return ERROR_TARGET_NOT_HALTED;
916 }
917
918 /* current = 1: continue on current pc, otherwise continue at <address> */
919 if (!current)
920 buf_set_u32(pc->value, 0, 32, address);
921
922 uint32_t pc_value = buf_get_u32(pc->value, 0, 32);
923
924 /* the front-end may request us not to handle breakpoints */
925 if (handle_breakpoints) {
926 breakpoint = breakpoint_find(target, pc_value);
927 if (breakpoint)
928 cortex_m_unset_breakpoint(target, breakpoint);
929 }
930
931 armv7m_maybe_skip_bkpt_inst(target, &bkpt_inst_found);
932
933 target->debug_reason = DBG_REASON_SINGLESTEP;
934
935 armv7m_restore_context(target);
936
937 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
938
939 /* if no bkpt instruction is found at pc then we can perform
940 * a normal step, otherwise we have to manually step over the bkpt
941 * instruction - as such simulate a step */
942 if (bkpt_inst_found == false) {
943 if (cortex_m->isrmasking_mode != CORTEX_M_ISRMASK_AUTO) {
944 /* Automatic ISR masking mode off: Just step over the next
945 * instruction, with interrupts on or off as appropriate. */
946 cortex_m_set_maskints_for_step(target);
947 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
948 } else {
949 /* Process interrupts during stepping in a way they don't interfere
950 * debugging.
951 *
952 * Principle:
953 *
954 * Set a temporary break point at the current pc and let the core run
955 * with interrupts enabled. Pending interrupts get served and we run
956 * into the breakpoint again afterwards. Then we step over the next
957 * instruction with interrupts disabled.
958 *
959 * If the pending interrupts don't complete within time, we leave the
960 * core running. This may happen if the interrupts trigger faster
961 * than the core can process them or the handler doesn't return.
962 *
963 * If no more breakpoints are available we simply do a step with
964 * interrupts enabled.
965 *
966 */
967
968 /* 2012-09-29 ph
969 *
970 * If a break point is already set on the lower half word then a break point on
971 * the upper half word will not break again when the core is restarted. So we
972 * just step over the instruction with interrupts disabled.
973 *
974 * The documentation has no information about this, it was found by observation
975 * on STM32F1 and STM32F2. Proper explanation welcome. STM32F0 doesn't seem to
976 * suffer from this problem.
977 *
978 * To add some confusion: pc_value has bit 0 always set, while the breakpoint
979 * address has it always cleared. The former is done to indicate thumb mode
980 * to gdb.
981 *
982 */
983 if ((pc_value & 0x02) && breakpoint_find(target, pc_value & ~0x03)) {
984 LOG_DEBUG("Stepping over next instruction with interrupts disabled");
985 cortex_m_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
986 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
987 /* Re-enable interrupts if appropriate */
988 cortex_m_write_debug_halt_mask(target, C_HALT, 0);
989 cortex_m_set_maskints_for_halt(target);
990 } else {
991
992 /* Set a temporary break point */
993 if (breakpoint) {
994 retval = cortex_m_set_breakpoint(target, breakpoint);
995 } else {
996 enum breakpoint_type type = BKPT_HARD;
997 if (cortex_m->fp_rev == 0 && pc_value > 0x1FFFFFFF) {
998 /* FPB rev.1 cannot handle such addr, try BKPT instr */
999 type = BKPT_SOFT;
1000 }
1001 retval = breakpoint_add(target, pc_value, 2, type);
1002 }
1003
1004 bool tmp_bp_set = (retval == ERROR_OK);
1005
1006 /* No more breakpoints left, just do a step */
1007 if (!tmp_bp_set) {
1008 cortex_m_set_maskints_for_step(target);
1009 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
1010 /* Re-enable interrupts if appropriate */
1011 cortex_m_write_debug_halt_mask(target, C_HALT, 0);
1012 cortex_m_set_maskints_for_halt(target);
1013 } else {
1014 /* Start the core */
1015 LOG_DEBUG("Starting core to serve pending interrupts");
1016 int64_t t_start = timeval_ms();
1017 cortex_m_set_maskints_for_run(target);
1018 cortex_m_write_debug_halt_mask(target, 0, C_HALT | C_STEP);
1019
1020 /* Wait for pending handlers to complete or timeout */
1021 do {
1022 retval = mem_ap_read_atomic_u32(armv7m->debug_ap,
1023 DCB_DHCSR,
1024 &cortex_m->dcb_dhcsr);
1025 if (retval != ERROR_OK) {
1026 target->state = TARGET_UNKNOWN;
1027 return retval;
1028 }
1029 isr_timed_out = ((timeval_ms() - t_start) > 500);
1030 } while (!((cortex_m->dcb_dhcsr & S_HALT) || isr_timed_out));
1031
1032 /* only remove breakpoint if we created it */
1033 if (breakpoint)
1034 cortex_m_unset_breakpoint(target, breakpoint);
1035 else {
1036 /* Remove the temporary breakpoint */
1037 breakpoint_remove(target, pc_value);
1038 }
1039
1040 if (isr_timed_out) {
1041 LOG_DEBUG("Interrupt handlers didn't complete within time, "
1042 "leaving target running");
1043 } else {
1044 /* Step over next instruction with interrupts disabled */
1045 cortex_m_set_maskints_for_step(target);
1046 cortex_m_write_debug_halt_mask(target,
1047 C_HALT | C_MASKINTS,
1048 0);
1049 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
1050 /* Re-enable interrupts if appropriate */
1051 cortex_m_write_debug_halt_mask(target, C_HALT, 0);
1052 cortex_m_set_maskints_for_halt(target);
1053 }
1054 }
1055 }
1056 }
1057 }
1058
1059 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
1060 if (retval != ERROR_OK)
1061 return retval;
1062
1063 /* registers are now invalid */
1064 register_cache_invalidate(armv7m->arm.core_cache);
1065
1066 if (breakpoint)
1067 cortex_m_set_breakpoint(target, breakpoint);
1068
1069 if (isr_timed_out) {
1070 /* Leave the core running. The user has to stop execution manually. */
1071 target->debug_reason = DBG_REASON_NOTHALTED;
1072 target->state = TARGET_RUNNING;
1073 return ERROR_OK;
1074 }
1075
1076 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
1077 " nvic_icsr = 0x%" PRIx32,
1078 cortex_m->dcb_dhcsr, cortex_m->nvic_icsr);
1079
1080 retval = cortex_m_debug_entry(target);
1081 if (retval != ERROR_OK)
1082 return retval;
1083 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
1084
1085 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
1086 " nvic_icsr = 0x%" PRIx32,
1087 cortex_m->dcb_dhcsr, cortex_m->nvic_icsr);
1088
1089 return ERROR_OK;
1090 }
1091
1092 static int cortex_m_assert_reset(struct target *target)
1093 {
1094 struct cortex_m_common *cortex_m = target_to_cm(target);
1095 struct armv7m_common *armv7m = &cortex_m->armv7m;
1096 enum cortex_m_soft_reset_config reset_config = cortex_m->soft_reset_config;
1097
1098 LOG_DEBUG("target->state: %s",
1099 target_state_name(target));
1100
1101 enum reset_types jtag_reset_config = jtag_get_reset_config();
1102
1103 if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT)) {
1104 /* allow scripts to override the reset event */
1105
1106 target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
1107 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
1108 target->state = TARGET_RESET;
1109
1110 return ERROR_OK;
1111 }
1112
1113 /* some cores support connecting while srst is asserted
1114 * use that mode is it has been configured */
1115
1116 bool srst_asserted = false;
1117
1118 if (!target_was_examined(target)) {
1119 if (jtag_reset_config & RESET_HAS_SRST) {
1120 adapter_assert_reset();
1121 if (target->reset_halt)
1122 LOG_ERROR("Target not examined, will not halt after reset!");
1123 return ERROR_OK;
1124 } else {
1125 LOG_ERROR("Target not examined, reset NOT asserted!");
1126 return ERROR_FAIL;
1127 }
1128 }
1129
1130 if ((jtag_reset_config & RESET_HAS_SRST) &&
1131 (jtag_reset_config & RESET_SRST_NO_GATING)) {
1132 adapter_assert_reset();
1133 srst_asserted = true;
1134 }
1135
1136 /* Enable debug requests */
1137 int retval;
1138 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
1139 /* Store important errors instead of failing and proceed to reset assert */
1140
1141 if (retval != ERROR_OK || !(cortex_m->dcb_dhcsr & C_DEBUGEN))
1142 retval = cortex_m_write_debug_halt_mask(target, 0, C_HALT | C_STEP | C_MASKINTS);
1143
1144 /* If the processor is sleeping in a WFI or WFE instruction, the
1145 * C_HALT bit must be asserted to regain control */
1146 if (retval == ERROR_OK && (cortex_m->dcb_dhcsr & S_SLEEP))
1147 retval = cortex_m_write_debug_halt_mask(target, C_HALT, 0);
1148
1149 mem_ap_write_u32(armv7m->debug_ap, DCB_DCRDR, 0);
1150 /* Ignore less important errors */
1151
1152 if (!target->reset_halt) {
1153 /* Set/Clear C_MASKINTS in a separate operation */
1154 cortex_m_set_maskints_for_run(target);
1155
1156 /* clear any debug flags before resuming */
1157 cortex_m_clear_halt(target);
1158
1159 /* clear C_HALT in dhcsr reg */
1160 cortex_m_write_debug_halt_mask(target, 0, C_HALT);
1161 } else {
1162 /* Halt in debug on reset; endreset_event() restores DEMCR.
1163 *
1164 * REVISIT catching BUSERR presumably helps to defend against
1165 * bad vector table entries. Should this include MMERR or
1166 * other flags too?
1167 */
1168 int retval2;
1169 retval2 = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DEMCR,
1170 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
1171 if (retval != ERROR_OK || retval2 != ERROR_OK)
1172 LOG_INFO("AP write error, reset will not halt");
1173 }
1174
1175 if (jtag_reset_config & RESET_HAS_SRST) {
1176 /* default to asserting srst */
1177 if (!srst_asserted)
1178 adapter_assert_reset();
1179
1180 /* srst is asserted, ignore AP access errors */
1181 retval = ERROR_OK;
1182 } else {
1183 /* Use a standard Cortex-M3 software reset mechanism.
1184 * We default to using VECRESET as it is supported on all current cores
1185 * (except Cortex-M0, M0+ and M1 which support SYSRESETREQ only!)
1186 * This has the disadvantage of not resetting the peripherals, so a
1187 * reset-init event handler is needed to perform any peripheral resets.
1188 */
1189 if (!cortex_m->vectreset_supported
1190 && reset_config == CORTEX_M_RESET_VECTRESET) {
1191 reset_config = CORTEX_M_RESET_SYSRESETREQ;
1192 LOG_WARNING("VECTRESET is not supported on this Cortex-M core, using SYSRESETREQ instead.");
1193 LOG_WARNING("Set 'cortex_m reset_config sysresetreq'.");
1194 }
1195
1196 LOG_DEBUG("Using Cortex-M %s", (reset_config == CORTEX_M_RESET_SYSRESETREQ)
1197 ? "SYSRESETREQ" : "VECTRESET");
1198
1199 if (reset_config == CORTEX_M_RESET_VECTRESET) {
1200 LOG_WARNING("Only resetting the Cortex-M core, use a reset-init event "
1201 "handler to reset any peripherals or configure hardware srst support.");
1202 }
1203
1204 int retval3;
1205 retval3 = mem_ap_write_atomic_u32(armv7m->debug_ap, NVIC_AIRCR,
1206 AIRCR_VECTKEY | ((reset_config == CORTEX_M_RESET_SYSRESETREQ)
1207 ? AIRCR_SYSRESETREQ : AIRCR_VECTRESET));
1208 if (retval3 != ERROR_OK)
1209 LOG_DEBUG("Ignoring AP write error right after reset");
1210
1211 retval3 = dap_dp_init(armv7m->debug_ap->dap);
1212 if (retval3 != ERROR_OK)
1213 LOG_ERROR("DP initialisation failed");
1214
1215 else {
1216 /* I do not know why this is necessary, but it
1217 * fixes strange effects (step/resume cause NMI
1218 * after reset) on LM3S6918 -- Michael Schwingen
1219 */
1220 uint32_t tmp;
1221 mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_AIRCR, &tmp);
1222 }
1223 }
1224
1225 target->state = TARGET_RESET;
1226 jtag_sleep(50000);
1227
1228 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
1229
1230 /* now return stored error code if any */
1231 if (retval != ERROR_OK)
1232 return retval;
1233
1234 if (target->reset_halt) {
1235 retval = target_halt(target);
1236 if (retval != ERROR_OK)
1237 return retval;
1238 }
1239
1240 return ERROR_OK;
1241 }
1242
1243 static int cortex_m_deassert_reset(struct target *target)
1244 {
1245 struct armv7m_common *armv7m = &target_to_cm(target)->armv7m;
1246
1247 LOG_DEBUG("target->state: %s",
1248 target_state_name(target));
1249
1250 /* deassert reset lines */
1251 adapter_deassert_reset();
1252
1253 enum reset_types jtag_reset_config = jtag_get_reset_config();
1254
1255 if ((jtag_reset_config & RESET_HAS_SRST) &&
1256 !(jtag_reset_config & RESET_SRST_NO_GATING) &&
1257 target_was_examined(target)) {
1258 int retval = dap_dp_init(armv7m->debug_ap->dap);
1259 if (retval != ERROR_OK) {
1260 LOG_ERROR("DP initialisation failed");
1261 return retval;
1262 }
1263 }
1264
1265 return ERROR_OK;
1266 }
1267
1268 int cortex_m_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
1269 {
1270 int retval;
1271 int fp_num = 0;
1272 struct cortex_m_common *cortex_m = target_to_cm(target);
1273 struct cortex_m_fp_comparator *comparator_list = cortex_m->fp_comparator_list;
1274
1275 if (breakpoint->set) {
1276 LOG_WARNING("breakpoint (BPID: %" PRIu32 ") already set", breakpoint->unique_id);
1277 return ERROR_OK;
1278 }
1279
1280 if (breakpoint->type == BKPT_HARD) {
1281 uint32_t fpcr_value;
1282 while (comparator_list[fp_num].used && (fp_num < cortex_m->fp_num_code))
1283 fp_num++;
1284 if (fp_num >= cortex_m->fp_num_code) {
1285 LOG_ERROR("Can not find free FPB Comparator!");
1286 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1287 }
1288 breakpoint->set = fp_num + 1;
1289 fpcr_value = breakpoint->address | 1;
1290 if (cortex_m->fp_rev == 0) {
1291 if (breakpoint->address > 0x1FFFFFFF) {
1292 LOG_ERROR("Cortex-M Flash Patch Breakpoint rev.1 cannot handle HW breakpoint above address 0x1FFFFFFE");
1293 return ERROR_FAIL;
1294 }
1295 uint32_t hilo;
1296 hilo = (breakpoint->address & 0x2) ? FPCR_REPLACE_BKPT_HIGH : FPCR_REPLACE_BKPT_LOW;
1297 fpcr_value = (fpcr_value & 0x1FFFFFFC) | hilo | 1;
1298 } else if (cortex_m->fp_rev > 1) {
1299 LOG_ERROR("Unhandled Cortex-M Flash Patch Breakpoint architecture revision");
1300 return ERROR_FAIL;
1301 }
1302 comparator_list[fp_num].used = true;
1303 comparator_list[fp_num].fpcr_value = fpcr_value;
1304 target_write_u32(target, comparator_list[fp_num].fpcr_address,
1305 comparator_list[fp_num].fpcr_value);
1306 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32 "",
1307 fp_num,
1308 comparator_list[fp_num].fpcr_value);
1309 if (!cortex_m->fpb_enabled) {
1310 LOG_DEBUG("FPB wasn't enabled, do it now");
1311 retval = cortex_m_enable_fpb(target);
1312 if (retval != ERROR_OK) {
1313 LOG_ERROR("Failed to enable the FPB");
1314 return retval;
1315 }
1316
1317 cortex_m->fpb_enabled = true;
1318 }
1319 } else if (breakpoint->type == BKPT_SOFT) {
1320 uint8_t code[4];
1321
1322 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
1323 * semihosting; don't use that. Otherwise the BKPT
1324 * parameter is arbitrary.
1325 */
1326 buf_set_u32(code, 0, 32, ARMV5_T_BKPT(0x11));
1327 retval = target_read_memory(target,
1328 breakpoint->address & 0xFFFFFFFE,
1329 breakpoint->length, 1,
1330 breakpoint->orig_instr);
1331 if (retval != ERROR_OK)
1332 return retval;
1333 retval = target_write_memory(target,
1334 breakpoint->address & 0xFFFFFFFE,
1335 breakpoint->length, 1,
1336 code);
1337 if (retval != ERROR_OK)
1338 return retval;
1339 breakpoint->set = true;
1340 }
1341
1342 LOG_DEBUG("BPID: %" PRIu32 ", Type: %d, Address: " TARGET_ADDR_FMT " Length: %d (set=%d)",
1343 breakpoint->unique_id,
1344 (int)(breakpoint->type),
1345 breakpoint->address,
1346 breakpoint->length,
1347 breakpoint->set);
1348
1349 return ERROR_OK;
1350 }
1351
1352 int cortex_m_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
1353 {
1354 int retval;
1355 struct cortex_m_common *cortex_m = target_to_cm(target);
1356 struct cortex_m_fp_comparator *comparator_list = cortex_m->fp_comparator_list;
1357
1358 if (!breakpoint->set) {
1359 LOG_WARNING("breakpoint not set");
1360 return ERROR_OK;
1361 }
1362
1363 LOG_DEBUG("BPID: %" PRIu32 ", Type: %d, Address: " TARGET_ADDR_FMT " Length: %d (set=%d)",
1364 breakpoint->unique_id,
1365 (int)(breakpoint->type),
1366 breakpoint->address,
1367 breakpoint->length,
1368 breakpoint->set);
1369
1370 if (breakpoint->type == BKPT_HARD) {
1371 int fp_num = breakpoint->set - 1;
1372 if ((fp_num < 0) || (fp_num >= cortex_m->fp_num_code)) {
1373 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1374 return ERROR_OK;
1375 }
1376 comparator_list[fp_num].used = false;
1377 comparator_list[fp_num].fpcr_value = 0;
1378 target_write_u32(target, comparator_list[fp_num].fpcr_address,
1379 comparator_list[fp_num].fpcr_value);
1380 } else {
1381 /* restore original instruction (kept in target endianness) */
1382 retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE,
1383 breakpoint->length, 1,
1384 breakpoint->orig_instr);
1385 if (retval != ERROR_OK)
1386 return retval;
1387 }
1388 breakpoint->set = false;
1389
1390 return ERROR_OK;
1391 }
1392
1393 int cortex_m_add_breakpoint(struct target *target, struct breakpoint *breakpoint)
1394 {
1395 if (breakpoint->length == 3) {
1396 LOG_DEBUG("Using a two byte breakpoint for 32bit Thumb-2 request");
1397 breakpoint->length = 2;
1398 }
1399
1400 if ((breakpoint->length != 2)) {
1401 LOG_INFO("only breakpoints of two bytes length supported");
1402 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1403 }
1404
1405 return cortex_m_set_breakpoint(target, breakpoint);
1406 }
1407
1408 int cortex_m_remove_breakpoint(struct target *target, struct breakpoint *breakpoint)
1409 {
1410 if (!breakpoint->set)
1411 return ERROR_OK;
1412
1413 return cortex_m_unset_breakpoint(target, breakpoint);
1414 }
1415
1416 static int cortex_m_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
1417 {
1418 int dwt_num = 0;
1419 struct cortex_m_common *cortex_m = target_to_cm(target);
1420
1421 /* REVISIT Don't fully trust these "not used" records ... users
1422 * may set up breakpoints by hand, e.g. dual-address data value
1423 * watchpoint using comparator #1; comparator #0 matching cycle
1424 * count; send data trace info through ITM and TPIU; etc
1425 */
1426 struct cortex_m_dwt_comparator *comparator;
1427
1428 for (comparator = cortex_m->dwt_comparator_list;
1429 comparator->used && dwt_num < cortex_m->dwt_num_comp;
1430 comparator++, dwt_num++)
1431 continue;
1432 if (dwt_num >= cortex_m->dwt_num_comp) {
1433 LOG_ERROR("Can not find free DWT Comparator");
1434 return ERROR_FAIL;
1435 }
1436 comparator->used = true;
1437 watchpoint->set = dwt_num + 1;
1438
1439 comparator->comp = watchpoint->address;
1440 target_write_u32(target, comparator->dwt_comparator_address + 0,
1441 comparator->comp);
1442
1443 if ((cortex_m->dwt_devarch & 0x1FFFFF) != DWT_DEVARCH_ARMV8M) {
1444 uint32_t mask = 0, temp;
1445
1446 /* watchpoint params were validated earlier */
1447 temp = watchpoint->length;
1448 while (temp) {
1449 temp >>= 1;
1450 mask++;
1451 }
1452 mask--;
1453
1454 comparator->mask = mask;
1455 target_write_u32(target, comparator->dwt_comparator_address + 4,
1456 comparator->mask);
1457
1458 switch (watchpoint->rw) {
1459 case WPT_READ:
1460 comparator->function = 5;
1461 break;
1462 case WPT_WRITE:
1463 comparator->function = 6;
1464 break;
1465 case WPT_ACCESS:
1466 comparator->function = 7;
1467 break;
1468 }
1469 } else {
1470 uint32_t data_size = watchpoint->length >> 1;
1471 comparator->mask = (watchpoint->length >> 1) | 1;
1472
1473 switch (watchpoint->rw) {
1474 case WPT_ACCESS:
1475 comparator->function = 4;
1476 break;
1477 case WPT_WRITE:
1478 comparator->function = 5;
1479 break;
1480 case WPT_READ:
1481 comparator->function = 6;
1482 break;
1483 }
1484 comparator->function = comparator->function | (1 << 4) |
1485 (data_size << 10);
1486 }
1487
1488 target_write_u32(target, comparator->dwt_comparator_address + 8,
1489 comparator->function);
1490
1491 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1492 watchpoint->unique_id, dwt_num,
1493 (unsigned) comparator->comp,
1494 (unsigned) comparator->mask,
1495 (unsigned) comparator->function);
1496 return ERROR_OK;
1497 }
1498
1499 static int cortex_m_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
1500 {
1501 struct cortex_m_common *cortex_m = target_to_cm(target);
1502 struct cortex_m_dwt_comparator *comparator;
1503 int dwt_num;
1504
1505 if (!watchpoint->set) {
1506 LOG_WARNING("watchpoint (wpid: %d) not set",
1507 watchpoint->unique_id);
1508 return ERROR_OK;
1509 }
1510
1511 dwt_num = watchpoint->set - 1;
1512
1513 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1514 watchpoint->unique_id, dwt_num,
1515 (unsigned) watchpoint->address);
1516
1517 if ((dwt_num < 0) || (dwt_num >= cortex_m->dwt_num_comp)) {
1518 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1519 return ERROR_OK;
1520 }
1521
1522 comparator = cortex_m->dwt_comparator_list + dwt_num;
1523 comparator->used = false;
1524 comparator->function = 0;
1525 target_write_u32(target, comparator->dwt_comparator_address + 8,
1526 comparator->function);
1527
1528 watchpoint->set = false;
1529
1530 return ERROR_OK;
1531 }
1532
1533 int cortex_m_add_watchpoint(struct target *target, struct watchpoint *watchpoint)
1534 {
1535 struct cortex_m_common *cortex_m = target_to_cm(target);
1536
1537 if (cortex_m->dwt_comp_available < 1) {
1538 LOG_DEBUG("no comparators?");
1539 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1540 }
1541
1542 /* hardware doesn't support data value masking */
1543 if (watchpoint->mask != ~(uint32_t)0) {
1544 LOG_DEBUG("watchpoint value masks not supported");
1545 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1546 }
1547
1548 /* hardware allows address masks of up to 32K */
1549 unsigned mask;
1550
1551 for (mask = 0; mask < 16; mask++) {
1552 if ((1u << mask) == watchpoint->length)
1553 break;
1554 }
1555 if (mask == 16) {
1556 LOG_DEBUG("unsupported watchpoint length");
1557 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1558 }
1559 if (watchpoint->address & ((1 << mask) - 1)) {
1560 LOG_DEBUG("watchpoint address is unaligned");
1561 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1562 }
1563
1564 /* Caller doesn't seem to be able to describe watching for data
1565 * values of zero; that flags "no value".
1566 *
1567 * REVISIT This DWT may well be able to watch for specific data
1568 * values. Requires comparator #1 to set DATAVMATCH and match
1569 * the data, and another comparator (DATAVADDR0) matching addr.
1570 */
1571 if (watchpoint->value) {
1572 LOG_DEBUG("data value watchpoint not YET supported");
1573 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1574 }
1575
1576 cortex_m->dwt_comp_available--;
1577 LOG_DEBUG("dwt_comp_available: %d", cortex_m->dwt_comp_available);
1578
1579 return ERROR_OK;
1580 }
1581
1582 int cortex_m_remove_watchpoint(struct target *target, struct watchpoint *watchpoint)
1583 {
1584 struct cortex_m_common *cortex_m = target_to_cm(target);
1585
1586 /* REVISIT why check? DWT can be updated with core running ... */
1587 if (target->state != TARGET_HALTED) {
1588 LOG_WARNING("target not halted");
1589 return ERROR_TARGET_NOT_HALTED;
1590 }
1591
1592 if (watchpoint->set)
1593 cortex_m_unset_watchpoint(target, watchpoint);
1594
1595 cortex_m->dwt_comp_available++;
1596 LOG_DEBUG("dwt_comp_available: %d", cortex_m->dwt_comp_available);
1597
1598 return ERROR_OK;
1599 }
1600
1601 void cortex_m_enable_watchpoints(struct target *target)
1602 {
1603 struct watchpoint *watchpoint = target->watchpoints;
1604
1605 /* set any pending watchpoints */
1606 while (watchpoint) {
1607 if (!watchpoint->set)
1608 cortex_m_set_watchpoint(target, watchpoint);
1609 watchpoint = watchpoint->next;
1610 }
1611 }
1612
1613 static int cortex_m_load_core_reg_u32(struct target *target,
1614 uint32_t num, uint32_t *value)
1615 {
1616 int retval;
1617
1618 /* NOTE: we "know" here that the register identifiers used
1619 * in the v7m header match the Cortex-M3 Debug Core Register
1620 * Selector values for R0..R15, xPSR, MSP, and PSP.
1621 */
1622 switch (num) {
1623 case 0 ... 18:
1624 /* read a normal core register */
1625 retval = cortexm_dap_read_coreregister_u32(target, value, num);
1626
1627 if (retval != ERROR_OK) {
1628 LOG_ERROR("JTAG failure %i", retval);
1629 return ERROR_JTAG_DEVICE_ERROR;
1630 }
1631 LOG_DEBUG("load from core reg %i value 0x%" PRIx32 "", (int)num, *value);
1632 break;
1633
1634 case ARMV7M_FPSCR:
1635 /* Floating-point Status and Registers */
1636 retval = target_write_u32(target, DCB_DCRSR, 0x21);
1637 if (retval != ERROR_OK)
1638 return retval;
1639 retval = target_read_u32(target, DCB_DCRDR, value);
1640 if (retval != ERROR_OK)
1641 return retval;
1642 LOG_DEBUG("load from FPSCR value 0x%" PRIx32, *value);
1643 break;
1644
1645 case ARMV7M_S0 ... ARMV7M_S31:
1646 /* Floating-point Status and Registers */
1647 retval = target_write_u32(target, DCB_DCRSR, num - ARMV7M_S0 + 0x40);
1648 if (retval != ERROR_OK)
1649 return retval;
1650 retval = target_read_u32(target, DCB_DCRDR, value);
1651 if (retval != ERROR_OK)
1652 return retval;
1653 LOG_DEBUG("load from FPU reg S%d value 0x%" PRIx32,
1654 (int)(num - ARMV7M_S0), *value);
1655 break;
1656
1657 case ARMV7M_PRIMASK:
1658 case ARMV7M_BASEPRI:
1659 case ARMV7M_FAULTMASK:
1660 case ARMV7M_CONTROL:
1661 /* Cortex-M3 packages these four registers as bitfields
1662 * in one Debug Core register. So say r0 and r2 docs;
1663 * it was removed from r1 docs, but still works.
1664 */
1665 cortexm_dap_read_coreregister_u32(target, value, 20);
1666
1667 switch (num) {
1668 case ARMV7M_PRIMASK:
1669 *value = buf_get_u32((uint8_t *)value, 0, 1);
1670 break;
1671
1672 case ARMV7M_BASEPRI:
1673 *value = buf_get_u32((uint8_t *)value, 8, 8);
1674 break;
1675
1676 case ARMV7M_FAULTMASK:
1677 *value = buf_get_u32((uint8_t *)value, 16, 1);
1678 break;
1679
1680 case ARMV7M_CONTROL:
1681 *value = buf_get_u32((uint8_t *)value, 24, 3);
1682 break;
1683 }
1684
1685 LOG_DEBUG("load from special reg %i value 0x%" PRIx32 "", (int)num, *value);
1686 break;
1687
1688 default:
1689 return ERROR_COMMAND_SYNTAX_ERROR;
1690 }
1691
1692 return ERROR_OK;
1693 }
1694
1695 static int cortex_m_store_core_reg_u32(struct target *target,
1696 uint32_t num, uint32_t value)
1697 {
1698 int retval;
1699 uint32_t reg;
1700 struct armv7m_common *armv7m = target_to_armv7m(target);
1701
1702 /* NOTE: we "know" here that the register identifiers used
1703 * in the v7m header match the Cortex-M3 Debug Core Register
1704 * Selector values for R0..R15, xPSR, MSP, and PSP.
1705 */
1706 switch (num) {
1707 case 0 ... 18:
1708 retval = cortexm_dap_write_coreregister_u32(target, value, num);
1709 if (retval != ERROR_OK) {
1710 struct reg *r;
1711
1712 LOG_ERROR("JTAG failure");
1713 r = armv7m->arm.core_cache->reg_list + num;
1714 r->dirty = r->valid;
1715 return ERROR_JTAG_DEVICE_ERROR;
1716 }
1717 LOG_DEBUG("write core reg %i value 0x%" PRIx32 "", (int)num, value);
1718 break;
1719
1720 case ARMV7M_FPSCR:
1721 /* Floating-point Status and Registers */
1722 retval = target_write_u32(target, DCB_DCRDR, value);
1723 if (retval != ERROR_OK)
1724 return retval;
1725 retval = target_write_u32(target, DCB_DCRSR, 0x21 | (1<<16));
1726 if (retval != ERROR_OK)
1727 return retval;
1728 LOG_DEBUG("write FPSCR value 0x%" PRIx32, value);
1729 break;
1730
1731 case ARMV7M_S0 ... ARMV7M_S31:
1732 /* Floating-point Status and Registers */
1733 retval = target_write_u32(target, DCB_DCRDR, value);
1734 if (retval != ERROR_OK)
1735 return retval;
1736 retval = target_write_u32(target, DCB_DCRSR, (num - ARMV7M_S0 + 0x40) | (1<<16));
1737 if (retval != ERROR_OK)
1738 return retval;
1739 LOG_DEBUG("write FPU reg S%d value 0x%" PRIx32,
1740 (int)(num - ARMV7M_S0), value);
1741 break;
1742
1743 case ARMV7M_PRIMASK:
1744 case ARMV7M_BASEPRI:
1745 case ARMV7M_FAULTMASK:
1746 case ARMV7M_CONTROL:
1747 /* Cortex-M3 packages these four registers as bitfields
1748 * in one Debug Core register. So say r0 and r2 docs;
1749 * it was removed from r1 docs, but still works.
1750 */
1751 cortexm_dap_read_coreregister_u32(target, &reg, 20);
1752
1753 switch (num) {
1754 case ARMV7M_PRIMASK:
1755 buf_set_u32((uint8_t *)&reg, 0, 1, value);
1756 break;
1757
1758 case ARMV7M_BASEPRI:
1759 buf_set_u32((uint8_t *)&reg, 8, 8, value);
1760 break;
1761
1762 case ARMV7M_FAULTMASK:
1763 buf_set_u32((uint8_t *)&reg, 16, 1, value);
1764 break;
1765
1766 case ARMV7M_CONTROL:
1767 buf_set_u32((uint8_t *)&reg, 24, 3, value);
1768 break;
1769 }
1770
1771 cortexm_dap_write_coreregister_u32(target, reg, 20);
1772
1773 LOG_DEBUG("write special reg %i value 0x%" PRIx32 " ", (int)num, value);
1774 break;
1775
1776 default:
1777 return ERROR_COMMAND_SYNTAX_ERROR;
1778 }
1779
1780 return ERROR_OK;
1781 }
1782
1783 static int cortex_m_read_memory(struct target *target, target_addr_t address,
1784 uint32_t size, uint32_t count, uint8_t *buffer)
1785 {
1786 struct armv7m_common *armv7m = target_to_armv7m(target);
1787
1788 if (armv7m->arm.is_armv6m) {
1789 /* armv6m does not handle unaligned memory access */
1790 if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
1791 return ERROR_TARGET_UNALIGNED_ACCESS;
1792 }
1793
1794 return mem_ap_read_buf(armv7m->debug_ap, buffer, size, count, address);
1795 }
1796
1797 static int cortex_m_write_memory(struct target *target, target_addr_t address,
1798 uint32_t size, uint32_t count, const uint8_t *buffer)
1799 {
1800 struct armv7m_common *armv7m = target_to_armv7m(target);
1801
1802 if (armv7m->arm.is_armv6m) {
1803 /* armv6m does not handle unaligned memory access */
1804 if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
1805 return ERROR_TARGET_UNALIGNED_ACCESS;
1806 }
1807
1808 return mem_ap_write_buf(armv7m->debug_ap, buffer, size, count, address);
1809 }
1810
1811 static int cortex_m_init_target(struct command_context *cmd_ctx,
1812 struct target *target)
1813 {
1814 armv7m_build_reg_cache(target);
1815 arm_semihosting_init(target);
1816 return ERROR_OK;
1817 }
1818
1819 void cortex_m_deinit_target(struct target *target)
1820 {
1821 struct cortex_m_common *cortex_m = target_to_cm(target);
1822
1823 free(cortex_m->fp_comparator_list);
1824
1825 cortex_m_dwt_free(target);
1826 armv7m_free_reg_cache(target);
1827
1828 free(target->private_config);
1829 free(cortex_m);
1830 }
1831
1832 int cortex_m_profiling(struct target *target, uint32_t *samples,
1833 uint32_t max_num_samples, uint32_t *num_samples, uint32_t seconds)
1834 {
1835 struct timeval timeout, now;
1836 struct armv7m_common *armv7m = target_to_armv7m(target);
1837 uint32_t reg_value;
1838 int retval;
1839
1840 retval = target_read_u32(target, DWT_PCSR, &reg_value);
1841 if (retval != ERROR_OK) {
1842 LOG_ERROR("Error while reading PCSR");
1843 return retval;
1844 }
1845 if (reg_value == 0) {
1846 LOG_INFO("PCSR sampling not supported on this processor.");
1847 return target_profiling_default(target, samples, max_num_samples, num_samples, seconds);
1848 }
1849
1850 gettimeofday(&timeout, NULL);
1851 timeval_add_time(&timeout, seconds, 0);
1852
1853 LOG_INFO("Starting Cortex-M profiling. Sampling DWT_PCSR as fast as we can...");
1854
1855 /* Make sure the target is running */
1856 target_poll(target);
1857 if (target->state == TARGET_HALTED)
1858 retval = target_resume(target, 1, 0, 0, 0);
1859
1860 if (retval != ERROR_OK) {
1861 LOG_ERROR("Error while resuming target");
1862 return retval;
1863 }
1864
1865 uint32_t sample_count = 0;
1866
1867 for (;;) {
1868 if (armv7m && armv7m->debug_ap) {
1869 uint32_t read_count = max_num_samples - sample_count;
1870 if (read_count > 1024)
1871 read_count = 1024;
1872
1873 retval = mem_ap_read_buf_noincr(armv7m->debug_ap,
1874 (void *)&samples[sample_count],
1875 4, read_count, DWT_PCSR);
1876 sample_count += read_count;
1877 } else {
1878 target_read_u32(target, DWT_PCSR, &samples[sample_count++]);
1879 }
1880
1881 if (retval != ERROR_OK) {
1882 LOG_ERROR("Error while reading PCSR");
1883 return retval;
1884 }
1885
1886
1887 gettimeofday(&now, NULL);
1888 if (sample_count >= max_num_samples || timeval_compare(&now, &timeout) > 0) {
1889 LOG_INFO("Profiling completed. %" PRIu32 " samples.", sample_count);
1890 break;
1891 }
1892 }
1893
1894 *num_samples = sample_count;
1895 return retval;
1896 }
1897
1898
1899 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1900 * on r/w if the core is not running, and clear on resume or reset ... or
1901 * at least, in a post_restore_context() method.
1902 */
1903
1904 struct dwt_reg_state {
1905 struct target *target;
1906 uint32_t addr;
1907 uint8_t value[4]; /* scratch/cache */
1908 };
1909
1910 static int cortex_m_dwt_get_reg(struct reg *reg)
1911 {
1912 struct dwt_reg_state *state = reg->arch_info;
1913
1914 uint32_t tmp;
1915 int retval = target_read_u32(state->target, state->addr, &tmp);
1916 if (retval != ERROR_OK)
1917 return retval;
1918
1919 buf_set_u32(state->value, 0, 32, tmp);
1920 return ERROR_OK;
1921 }
1922
1923 static int cortex_m_dwt_set_reg(struct reg *reg, uint8_t *buf)
1924 {
1925 struct dwt_reg_state *state = reg->arch_info;
1926
1927 return target_write_u32(state->target, state->addr,
1928 buf_get_u32(buf, 0, reg->size));
1929 }
1930
1931 struct dwt_reg {
1932 uint32_t addr;
1933 const char *name;
1934 unsigned size;
1935 };
1936
1937 static const struct dwt_reg dwt_base_regs[] = {
1938 { DWT_CTRL, "dwt_ctrl", 32, },
1939 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1940 * increments while the core is asleep.
1941 */
1942 { DWT_CYCCNT, "dwt_cyccnt", 32, },
1943 /* plus some 8 bit counters, useful for profiling with TPIU */
1944 };
1945
1946 static const struct dwt_reg dwt_comp[] = {
1947 #define DWT_COMPARATOR(i) \
1948 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1949 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1950 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1951 DWT_COMPARATOR(0),
1952 DWT_COMPARATOR(1),
1953 DWT_COMPARATOR(2),
1954 DWT_COMPARATOR(3),
1955 DWT_COMPARATOR(4),
1956 DWT_COMPARATOR(5),
1957 DWT_COMPARATOR(6),
1958 DWT_COMPARATOR(7),
1959 DWT_COMPARATOR(8),
1960 DWT_COMPARATOR(9),
1961 DWT_COMPARATOR(10),
1962 DWT_COMPARATOR(11),
1963 DWT_COMPARATOR(12),
1964 DWT_COMPARATOR(13),
1965 DWT_COMPARATOR(14),
1966 DWT_COMPARATOR(15),
1967 #undef DWT_COMPARATOR
1968 };
1969
1970 static const struct reg_arch_type dwt_reg_type = {
1971 .get = cortex_m_dwt_get_reg,
1972 .set = cortex_m_dwt_set_reg,
1973 };
1974
1975 static void cortex_m_dwt_addreg(struct target *t, struct reg *r, const struct dwt_reg *d)
1976 {
1977 struct dwt_reg_state *state;
1978
1979 state = calloc(1, sizeof(*state));
1980 if (!state)
1981 return;
1982 state->addr = d->addr;
1983 state->target = t;
1984
1985 r->name = d->name;
1986 r->size = d->size;
1987 r->value = state->value;
1988 r->arch_info = state;
1989 r->type = &dwt_reg_type;
1990 }
1991
1992 static void cortex_m_dwt_setup(struct cortex_m_common *cm, struct target *target)
1993 {
1994 uint32_t dwtcr;
1995 struct reg_cache *cache;
1996 struct cortex_m_dwt_comparator *comparator;
1997 int reg, i;
1998
1999 target_read_u32(target, DWT_CTRL, &dwtcr);
2000 LOG_DEBUG("DWT_CTRL: 0x%" PRIx32, dwtcr);
2001 if (!dwtcr) {
2002 LOG_DEBUG("no DWT");
2003 return;
2004 }
2005
2006 target_read_u32(target, DWT_DEVARCH, &cm->dwt_devarch);
2007 LOG_DEBUG("DWT_DEVARCH: 0x%" PRIx32, cm->dwt_devarch);
2008
2009 cm->dwt_num_comp = (dwtcr >> 28) & 0xF;
2010 cm->dwt_comp_available = cm->dwt_num_comp;
2011 cm->dwt_comparator_list = calloc(cm->dwt_num_comp,
2012 sizeof(struct cortex_m_dwt_comparator));
2013 if (!cm->dwt_comparator_list) {
2014 fail0:
2015 cm->dwt_num_comp = 0;
2016 LOG_ERROR("out of mem");
2017 return;
2018 }
2019
2020 cache = calloc(1, sizeof(*cache));
2021 if (!cache) {
2022 fail1:
2023 free(cm->dwt_comparator_list);
2024 goto fail0;
2025 }
2026 cache->name = "Cortex-M DWT registers";
2027 cache->num_regs = 2 + cm->dwt_num_comp * 3;
2028 cache->reg_list = calloc(cache->num_regs, sizeof(*cache->reg_list));
2029 if (!cache->reg_list) {
2030 free(cache);
2031 goto fail1;
2032 }
2033
2034 for (reg = 0; reg < 2; reg++)
2035 cortex_m_dwt_addreg(target, cache->reg_list + reg,
2036 dwt_base_regs + reg);
2037
2038 comparator = cm->dwt_comparator_list;
2039 for (i = 0; i < cm->dwt_num_comp; i++, comparator++) {
2040 int j;
2041
2042 comparator->dwt_comparator_address = DWT_COMP0 + 0x10 * i;
2043 for (j = 0; j < 3; j++, reg++)
2044 cortex_m_dwt_addreg(target, cache->reg_list + reg,
2045 dwt_comp + 3 * i + j);
2046
2047 /* make sure we clear any watchpoints enabled on the target */
2048 target_write_u32(target, comparator->dwt_comparator_address + 8, 0);
2049 }
2050
2051 *register_get_last_cache_p(&target->reg_cache) = cache;
2052 cm->dwt_cache = cache;
2053
2054 LOG_DEBUG("DWT dwtcr 0x%" PRIx32 ", comp %d, watch%s",
2055 dwtcr, cm->dwt_num_comp,
2056 (dwtcr & (0xf << 24)) ? " only" : "/trigger");
2057
2058 /* REVISIT: if num_comp > 1, check whether comparator #1 can
2059 * implement single-address data value watchpoints ... so we
2060 * won't need to check it later, when asked to set one up.
2061 */
2062 }
2063
2064 static void cortex_m_dwt_free(struct target *target)
2065 {
2066 struct cortex_m_common *cm = target_to_cm(target);
2067 struct reg_cache *cache = cm->dwt_cache;
2068
2069 free(cm->dwt_comparator_list);
2070 cm->dwt_comparator_list = NULL;
2071 cm->dwt_num_comp = 0;
2072
2073 if (cache) {
2074 register_unlink_cache(&target->reg_cache, cache);
2075
2076 if (cache->reg_list) {
2077 for (size_t i = 0; i < cache->num_regs; i++)
2078 free(cache->reg_list[i].arch_info);
2079 free(cache->reg_list);
2080 }
2081 free(cache);
2082 }
2083 cm->dwt_cache = NULL;
2084 }
2085
2086 #define MVFR0 0xe000ef40
2087 #define MVFR1 0xe000ef44
2088
2089 #define MVFR0_DEFAULT_M4 0x10110021
2090 #define MVFR1_DEFAULT_M4 0x11000011
2091
2092 #define MVFR0_DEFAULT_M7_SP 0x10110021
2093 #define MVFR0_DEFAULT_M7_DP 0x10110221
2094 #define MVFR1_DEFAULT_M7_SP 0x11000011
2095 #define MVFR1_DEFAULT_M7_DP 0x12000011
2096
2097 static int cortex_m_find_mem_ap(struct adiv5_dap *swjdp,
2098 struct adiv5_ap **debug_ap)
2099 {
2100 if (dap_find_ap(swjdp, AP_TYPE_AHB3_AP, debug_ap) == ERROR_OK)
2101 return ERROR_OK;
2102
2103 return dap_find_ap(swjdp, AP_TYPE_AHB5_AP, debug_ap);
2104 }
2105
2106 int cortex_m_examine(struct target *target)
2107 {
2108 int retval;
2109 uint32_t cpuid, fpcr, mvfr0, mvfr1;
2110 int i;
2111 struct cortex_m_common *cortex_m = target_to_cm(target);
2112 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
2113 struct armv7m_common *armv7m = target_to_armv7m(target);
2114
2115 /* stlink shares the examine handler but does not support
2116 * all its calls */
2117 if (!armv7m->stlink) {
2118 if (cortex_m->apsel == DP_APSEL_INVALID) {
2119 /* Search for the MEM-AP */
2120 retval = cortex_m_find_mem_ap(swjdp, &armv7m->debug_ap);
2121 if (retval != ERROR_OK) {
2122 LOG_ERROR("Could not find MEM-AP to control the core");
2123 return retval;
2124 }
2125 } else {
2126 armv7m->debug_ap = dap_ap(swjdp, cortex_m->apsel);
2127 }
2128
2129 /* Leave (only) generic DAP stuff for debugport_init(); */
2130 armv7m->debug_ap->memaccess_tck = 8;
2131
2132 retval = mem_ap_init(armv7m->debug_ap);
2133 if (retval != ERROR_OK)
2134 return retval;
2135 }
2136
2137 if (!target_was_examined(target)) {
2138 target_set_examined(target);
2139
2140 /* Read from Device Identification Registers */
2141 retval = target_read_u32(target, CPUID, &cpuid);
2142 if (retval != ERROR_OK)
2143 return retval;
2144
2145 /* Get CPU Type */
2146 i = (cpuid >> 4) & 0xf;
2147
2148 /* Check if it is an ARMv8-M core */
2149 armv7m->arm.is_armv8m = true;
2150
2151 switch (cpuid & ARM_CPUID_PARTNO_MASK) {
2152 case CORTEX_M23_PARTNO:
2153 i = 23;
2154 break;
2155 case CORTEX_M33_PARTNO:
2156 i = 33;
2157 break;
2158 case CORTEX_M35P_PARTNO:
2159 i = 35;
2160 break;
2161 case CORTEX_M55_PARTNO:
2162 i = 55;
2163 break;
2164 default:
2165 armv7m->arm.is_armv8m = false;
2166 break;
2167 }
2168
2169
2170 LOG_DEBUG("Cortex-M%d r%" PRId8 "p%" PRId8 " processor detected",
2171 i, (uint8_t)((cpuid >> 20) & 0xf), (uint8_t)((cpuid >> 0) & 0xf));
2172 cortex_m->maskints_erratum = false;
2173 if (i == 7) {
2174 uint8_t rev, patch;
2175 rev = (cpuid >> 20) & 0xf;
2176 patch = (cpuid >> 0) & 0xf;
2177 if ((rev == 0) && (patch < 2)) {
2178 LOG_WARNING("Silicon bug: single stepping may enter pending exception handler!");
2179 cortex_m->maskints_erratum = true;
2180 }
2181 }
2182 LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
2183
2184 /* VECTRESET is not supported on Cortex-M0, M0+ and M1 */
2185 cortex_m->vectreset_supported = i > 1;
2186
2187 if (i == 4) {
2188 target_read_u32(target, MVFR0, &mvfr0);
2189 target_read_u32(target, MVFR1, &mvfr1);
2190
2191 /* test for floating point feature on Cortex-M4 */
2192 if ((mvfr0 == MVFR0_DEFAULT_M4) && (mvfr1 == MVFR1_DEFAULT_M4)) {
2193 LOG_DEBUG("Cortex-M%d floating point feature FPv4_SP found", i);
2194 armv7m->fp_feature = FPv4_SP;
2195 }
2196 } else if (i == 7 || i == 33 || i == 35 || i == 55) {
2197 target_read_u32(target, MVFR0, &mvfr0);
2198 target_read_u32(target, MVFR1, &mvfr1);
2199
2200 /* test for floating point features on Cortex-M7 */
2201 if ((mvfr0 == MVFR0_DEFAULT_M7_SP) && (mvfr1 == MVFR1_DEFAULT_M7_SP)) {
2202 LOG_DEBUG("Cortex-M%d floating point feature FPv5_SP found", i);
2203 armv7m->fp_feature = FPv5_SP;
2204 } else if ((mvfr0 == MVFR0_DEFAULT_M7_DP) && (mvfr1 == MVFR1_DEFAULT_M7_DP)) {
2205 LOG_DEBUG("Cortex-M%d floating point feature FPv5_DP found", i);
2206 armv7m->fp_feature = FPv5_DP;
2207 }
2208 } else if (i == 0) {
2209 /* Cortex-M0 does not support unaligned memory access */
2210 armv7m->arm.is_armv6m = true;
2211 }
2212
2213 if (armv7m->fp_feature == FP_NONE &&
2214 armv7m->arm.core_cache->num_regs > ARMV7M_NUM_CORE_REGS_NOFP) {
2215 /* free unavailable FPU registers */
2216 size_t idx;
2217
2218 for (idx = ARMV7M_NUM_CORE_REGS_NOFP;
2219 idx < armv7m->arm.core_cache->num_regs;
2220 idx++) {
2221 free(armv7m->arm.core_cache->reg_list[idx].value);
2222 free(armv7m->arm.core_cache->reg_list[idx].feature);
2223 free(armv7m->arm.core_cache->reg_list[idx].reg_data_type);
2224 }
2225 armv7m->arm.core_cache->num_regs = ARMV7M_NUM_CORE_REGS_NOFP;
2226 }
2227
2228 if (!armv7m->stlink) {
2229 if (i == 3 || i == 4)
2230 /* Cortex-M3/M4 have 4096 bytes autoincrement range,
2231 * s. ARM IHI 0031C: MEM-AP 7.2.2 */
2232 armv7m->debug_ap->tar_autoincr_block = (1 << 12);
2233 else if (i == 7)
2234 /* Cortex-M7 has only 1024 bytes autoincrement range */
2235 armv7m->debug_ap->tar_autoincr_block = (1 << 10);
2236 }
2237
2238 /* Enable debug requests */
2239 retval = target_read_u32(target, DCB_DHCSR, &cortex_m->dcb_dhcsr);
2240 if (retval != ERROR_OK)
2241 return retval;
2242 if (!(cortex_m->dcb_dhcsr & C_DEBUGEN)) {
2243 uint32_t dhcsr = (cortex_m->dcb_dhcsr | C_DEBUGEN) & ~(C_HALT | C_STEP | C_MASKINTS);
2244
2245 retval = target_write_u32(target, DCB_DHCSR, DBGKEY | (dhcsr & 0x0000FFFFUL));
2246 if (retval != ERROR_OK)
2247 return retval;
2248 cortex_m->dcb_dhcsr = dhcsr;
2249 }
2250
2251 /* Configure trace modules */
2252 retval = target_write_u32(target, DCB_DEMCR, TRCENA | armv7m->demcr);
2253 if (retval != ERROR_OK)
2254 return retval;
2255
2256 if (armv7m->trace_config.config_type != TRACE_CONFIG_TYPE_DISABLED) {
2257 armv7m_trace_tpiu_config(target);
2258 armv7m_trace_itm_config(target);
2259 }
2260
2261 /* NOTE: FPB and DWT are both optional. */
2262
2263 /* Setup FPB */
2264 target_read_u32(target, FP_CTRL, &fpcr);
2265 /* bits [14:12] and [7:4] */
2266 cortex_m->fp_num_code = ((fpcr >> 8) & 0x70) | ((fpcr >> 4) & 0xF);
2267 cortex_m->fp_num_lit = (fpcr >> 8) & 0xF;
2268 /* Detect flash patch revision, see RM DDI 0403E.b page C1-817.
2269 Revision is zero base, fp_rev == 1 means Rev.2 ! */
2270 cortex_m->fp_rev = (fpcr >> 28) & 0xf;
2271 free(cortex_m->fp_comparator_list);
2272 cortex_m->fp_comparator_list = calloc(
2273 cortex_m->fp_num_code + cortex_m->fp_num_lit,
2274 sizeof(struct cortex_m_fp_comparator));
2275 cortex_m->fpb_enabled = fpcr & 1;
2276 for (i = 0; i < cortex_m->fp_num_code + cortex_m->fp_num_lit; i++) {
2277 cortex_m->fp_comparator_list[i].type =
2278 (i < cortex_m->fp_num_code) ? FPCR_CODE : FPCR_LITERAL;
2279 cortex_m->fp_comparator_list[i].fpcr_address = FP_COMP0 + 4 * i;
2280
2281 /* make sure we clear any breakpoints enabled on the target */
2282 target_write_u32(target, cortex_m->fp_comparator_list[i].fpcr_address, 0);
2283 }
2284 LOG_DEBUG("FPB fpcr 0x%" PRIx32 ", numcode %i, numlit %i",
2285 fpcr,
2286 cortex_m->fp_num_code,
2287 cortex_m->fp_num_lit);
2288
2289 /* Setup DWT */
2290 cortex_m_dwt_free(target);
2291 cortex_m_dwt_setup(cortex_m, target);
2292
2293 /* These hardware breakpoints only work for code in flash! */
2294 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
2295 target_name(target),
2296 cortex_m->fp_num_code,
2297 cortex_m->dwt_num_comp);
2298 }
2299
2300 return ERROR_OK;
2301 }
2302
2303 static int cortex_m_dcc_read(struct target *target, uint8_t *value, uint8_t *ctrl)
2304 {
2305 struct armv7m_common *armv7m = target_to_armv7m(target);
2306 uint16_t dcrdr;
2307 uint8_t buf[2];
2308 int retval;
2309
2310 retval = mem_ap_read_buf_noincr(armv7m->debug_ap, buf, 2, 1, DCB_DCRDR);
2311 if (retval != ERROR_OK)
2312 return retval;
2313
2314 dcrdr = target_buffer_get_u16(target, buf);
2315 *ctrl = (uint8_t)dcrdr;
2316 *value = (uint8_t)(dcrdr >> 8);
2317
2318 LOG_DEBUG("data 0x%x ctrl 0x%x", *value, *ctrl);
2319
2320 /* write ack back to software dcc register
2321 * signify we have read data */
2322 if (dcrdr & (1 << 0)) {
2323 target_buffer_set_u16(target, buf, 0);
2324 retval = mem_ap_write_buf_noincr(armv7m->debug_ap, buf, 2, 1, DCB_DCRDR);
2325 if (retval != ERROR_OK)
2326 return retval;
2327 }
2328
2329 return ERROR_OK;
2330 }
2331
2332 static int cortex_m_target_request_data(struct target *target,
2333 uint32_t size, uint8_t *buffer)
2334 {
2335 uint8_t data;
2336 uint8_t ctrl;
2337 uint32_t i;
2338
2339 for (i = 0; i < (size * 4); i++) {
2340 int retval = cortex_m_dcc_read(target, &data, &ctrl);
2341 if (retval != ERROR_OK)
2342 return retval;
2343 buffer[i] = data;
2344 }
2345
2346 return ERROR_OK;
2347 }
2348
2349 static int cortex_m_handle_target_request(void *priv)
2350 {
2351 struct target *target = priv;
2352 if (!target_was_examined(target))
2353 return ERROR_OK;
2354
2355 if (!target->dbg_msg_enabled)
2356 return ERROR_OK;
2357
2358 if (target->state == TARGET_RUNNING) {
2359 uint8_t data;
2360 uint8_t ctrl;
2361 int retval;
2362
2363 retval = cortex_m_dcc_read(target, &data, &ctrl);
2364 if (retval != ERROR_OK)
2365 return retval;
2366
2367 /* check if we have data */
2368 if (ctrl & (1 << 0)) {
2369 uint32_t request;
2370
2371 /* we assume target is quick enough */
2372 request = data;
2373 for (int i = 1; i <= 3; i++) {
2374 retval = cortex_m_dcc_read(target, &data, &ctrl);
2375 if (retval != ERROR_OK)
2376 return retval;
2377 request |= ((uint32_t)data << (i * 8));
2378 }
2379 target_request(target, request);
2380 }
2381 }
2382
2383 return ERROR_OK;
2384 }
2385
2386 static int cortex_m_init_arch_info(struct target *target,
2387 struct cortex_m_common *cortex_m, struct adiv5_dap *dap)
2388 {
2389 struct armv7m_common *armv7m = &cortex_m->armv7m;
2390
2391 armv7m_init_arch_info(target, armv7m);
2392
2393 /* default reset mode is to use srst if fitted
2394 * if not it will use CORTEX_M3_RESET_VECTRESET */
2395 cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET;
2396
2397 armv7m->arm.dap = dap;
2398
2399 /* register arch-specific functions */
2400 armv7m->examine_debug_reason = cortex_m_examine_debug_reason;
2401
2402 armv7m->post_debug_entry = NULL;
2403
2404 armv7m->pre_restore_context = NULL;
2405
2406 armv7m->load_core_reg_u32 = cortex_m_load_core_reg_u32;
2407 armv7m->store_core_reg_u32 = cortex_m_store_core_reg_u32;
2408
2409 target_register_timer_callback(cortex_m_handle_target_request, 1,
2410 TARGET_TIMER_TYPE_PERIODIC, target);
2411
2412 return ERROR_OK;
2413 }
2414
2415 static int cortex_m_target_create(struct target *target, Jim_Interp *interp)
2416 {
2417 struct adiv5_private_config *pc;
2418
2419 pc = (struct adiv5_private_config *)target->private_config;
2420 if (adiv5_verify_config(pc) != ERROR_OK)
2421 return ERROR_FAIL;
2422
2423 struct cortex_m_common *cortex_m = calloc(1, sizeof(struct cortex_m_common));
2424 if (cortex_m == NULL) {
2425 LOG_ERROR("No memory creating target");
2426 return ERROR_FAIL;
2427 }
2428
2429 cortex_m->common_magic = CORTEX_M_COMMON_MAGIC;
2430 cortex_m->apsel = pc->ap_num;
2431
2432 cortex_m_init_arch_info(target, cortex_m, pc->dap);
2433
2434 return ERROR_OK;
2435 }
2436
2437 /*--------------------------------------------------------------------------*/
2438
2439 static int cortex_m_verify_pointer(struct command_invocation *cmd,
2440 struct cortex_m_common *cm)
2441 {
2442 if (cm->common_magic != CORTEX_M_COMMON_MAGIC) {
2443 command_print(cmd, "target is not a Cortex-M");
2444 return ERROR_TARGET_INVALID;
2445 }
2446 return ERROR_OK;
2447 }
2448
2449 /*
2450 * Only stuff below this line should need to verify that its target
2451 * is a Cortex-M3. Everything else should have indirected through the
2452 * cortexm3_target structure, which is only used with CM3 targets.
2453 */
2454
2455 COMMAND_HANDLER(handle_cortex_m_vector_catch_command)
2456 {
2457 struct target *target = get_current_target(CMD_CTX);
2458 struct cortex_m_common *cortex_m = target_to_cm(target);
2459 struct armv7m_common *armv7m = &cortex_m->armv7m;
2460 uint32_t demcr = 0;
2461 int retval;
2462
2463 static const struct {
2464 char name[10];
2465 unsigned mask;
2466 } vec_ids[] = {
2467 { "hard_err", VC_HARDERR, },
2468 { "int_err", VC_INTERR, },
2469 { "bus_err", VC_BUSERR, },
2470 { "state_err", VC_STATERR, },
2471 { "chk_err", VC_CHKERR, },
2472 { "nocp_err", VC_NOCPERR, },
2473 { "mm_err", VC_MMERR, },
2474 { "reset", VC_CORERESET, },
2475 };
2476
2477 retval = cortex_m_verify_pointer(CMD, cortex_m);
2478 if (retval != ERROR_OK)
2479 return retval;
2480
2481 if (!target_was_examined(target)) {
2482 LOG_ERROR("Target not examined yet");
2483 return ERROR_FAIL;
2484 }
2485
2486 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DEMCR, &demcr);
2487 if (retval != ERROR_OK)
2488 return retval;
2489
2490 if (CMD_ARGC > 0) {
2491 unsigned catch = 0;
2492
2493 if (CMD_ARGC == 1) {
2494 if (strcmp(CMD_ARGV[0], "all") == 0) {
2495 catch = VC_HARDERR | VC_INTERR | VC_BUSERR
2496 | VC_STATERR | VC_CHKERR | VC_NOCPERR
2497 | VC_MMERR | VC_CORERESET;
2498 goto write;
2499 } else if (strcmp(CMD_ARGV[0], "none") == 0)
2500 goto write;
2501 }
2502 while (CMD_ARGC-- > 0) {
2503 unsigned i;
2504 for (i = 0; i < ARRAY_SIZE(vec_ids); i++) {
2505 if (strcmp(CMD_ARGV[CMD_ARGC], vec_ids[i].name) != 0)
2506 continue;
2507 catch |= vec_ids[i].mask;
2508 break;
2509 }
2510 if (i == ARRAY_SIZE(vec_ids)) {
2511 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV[CMD_ARGC]);
2512 return ERROR_COMMAND_SYNTAX_ERROR;
2513 }
2514 }
2515 write:
2516 /* For now, armv7m->demcr only stores vector catch flags. */
2517 armv7m->demcr = catch;
2518
2519 demcr &= ~0xffff;
2520 demcr |= catch;
2521
2522 /* write, but don't assume it stuck (why not??) */
2523 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DEMCR, demcr);
2524 if (retval != ERROR_OK)
2525 return retval;
2526 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DEMCR, &demcr);
2527 if (retval != ERROR_OK)
2528 return retval;
2529
2530 /* FIXME be sure to clear DEMCR on clean server shutdown.
2531 * Otherwise the vector catch hardware could fire when there's
2532 * no debugger hooked up, causing much confusion...
2533 */
2534 }
2535
2536 for (unsigned i = 0; i < ARRAY_SIZE(vec_ids); i++) {
2537 command_print(CMD, "%9s: %s", vec_ids[i].name,
2538 (demcr & vec_ids[i].mask) ? "catch" : "ignore");
2539 }
2540
2541 return ERROR_OK;
2542 }
2543
2544 COMMAND_HANDLER(handle_cortex_m_mask_interrupts_command)
2545 {
2546 struct target *target = get_current_target(CMD_CTX);
2547 struct cortex_m_common *cortex_m = target_to_cm(target);
2548 int retval;
2549
2550 static const Jim_Nvp nvp_maskisr_modes[] = {
2551 { .name = "auto", .value = CORTEX_M_ISRMASK_AUTO },
2552 { .name = "off", .value = CORTEX_M_ISRMASK_OFF },
2553 { .name = "on", .value = CORTEX_M_ISRMASK_ON },
2554 { .name = "steponly", .value = CORTEX_M_ISRMASK_STEPONLY },
2555 { .name = NULL, .value = -1 },
2556 };
2557 const Jim_Nvp *n;
2558
2559
2560 retval = cortex_m_verify_pointer(CMD, cortex_m);
2561 if (retval != ERROR_OK)
2562 return retval;
2563
2564 if (target->state != TARGET_HALTED) {
2565 command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME);
2566 return ERROR_OK;
2567 }
2568
2569 if (CMD_ARGC > 0) {
2570 n = Jim_Nvp_name2value_simple(nvp_maskisr_modes, CMD_ARGV[0]);
2571 if (n->name == NULL)
2572 return ERROR_COMMAND_SYNTAX_ERROR;
2573 cortex_m->isrmasking_mode = n->value;
2574 cortex_m_set_maskints_for_halt(target);
2575 }
2576
2577 n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, cortex_m->isrmasking_mode);
2578 command_print(CMD, "cortex_m interrupt mask %s", n->name);
2579
2580 return ERROR_OK;
2581 }
2582
2583 COMMAND_HANDLER(handle_cortex_m_reset_config_command)
2584 {
2585 struct target *target = get_current_target(CMD_CTX);
2586 struct cortex_m_common *cortex_m = target_to_cm(target);
2587 int retval;
2588 char *reset_config;
2589
2590 retval = cortex_m_verify_pointer(CMD, cortex_m);
2591 if (retval != ERROR_OK)
2592 return retval;
2593
2594 if (CMD_ARGC > 0) {
2595 if (strcmp(*CMD_ARGV, "sysresetreq") == 0)
2596 cortex_m->soft_reset_config = CORTEX_M_RESET_SYSRESETREQ;
2597
2598 else if (strcmp(*CMD_ARGV, "vectreset") == 0) {
2599 if (target_was_examined(target)
2600 && !cortex_m->vectreset_supported)
2601 LOG_WARNING("VECTRESET is not supported on your Cortex-M core!");
2602 else
2603 cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET;
2604
2605 } else
2606 return ERROR_COMMAND_SYNTAX_ERROR;
2607 }
2608
2609 switch (cortex_m->soft_reset_config) {
2610 case CORTEX_M_RESET_SYSRESETREQ:
2611 reset_config = "sysresetreq";
2612 break;
2613
2614 case CORTEX_M_RESET_VECTRESET:
2615 reset_config = "vectreset";
2616 break;
2617
2618 default:
2619 reset_config = "unknown";
2620 break;
2621 }
2622
2623 command_print(CMD, "cortex_m reset_config %s", reset_config);
2624
2625 return ERROR_OK;
2626 }
2627
2628 static const struct command_registration cortex_m_exec_command_handlers[] = {
2629 {
2630 .name = "maskisr",
2631 .handler = handle_cortex_m_mask_interrupts_command,
2632 .mode = COMMAND_EXEC,
2633 .help = "mask cortex_m interrupts",
2634 .usage = "['auto'|'on'|'off'|'steponly']",
2635 },
2636 {
2637 .name = "vector_catch",
2638 .handler = handle_cortex_m_vector_catch_command,
2639 .mode = COMMAND_EXEC,
2640 .help = "configure hardware vectors to trigger debug entry",
2641 .usage = "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2642 },
2643 {
2644 .name = "reset_config",
2645 .handler = handle_cortex_m_reset_config_command,
2646 .mode = COMMAND_ANY,
2647 .help = "configure software reset handling",
2648 .usage = "['sysresetreq'|'vectreset']",
2649 },
2650 COMMAND_REGISTRATION_DONE
2651 };
2652 static const struct command_registration cortex_m_command_handlers[] = {
2653 {
2654 .chain = armv7m_command_handlers,
2655 },
2656 {
2657 .chain = armv7m_trace_command_handlers,
2658 },
2659 {
2660 .name = "cortex_m",
2661 .mode = COMMAND_EXEC,
2662 .help = "Cortex-M command group",
2663 .usage = "",
2664 .chain = cortex_m_exec_command_handlers,
2665 },
2666 COMMAND_REGISTRATION_DONE
2667 };
2668
2669 struct target_type cortexm_target = {
2670 .name = "cortex_m",
2671 .deprecated_name = "cortex_m3",
2672
2673 .poll = cortex_m_poll,
2674 .arch_state = armv7m_arch_state,
2675
2676 .target_request_data = cortex_m_target_request_data,
2677
2678 .halt = cortex_m_halt,
2679 .resume = cortex_m_resume,
2680 .step = cortex_m_step,
2681
2682 .assert_reset = cortex_m_assert_reset,
2683 .deassert_reset = cortex_m_deassert_reset,
2684 .soft_reset_halt = cortex_m_soft_reset_halt,
2685
2686 .get_gdb_arch = arm_get_gdb_arch,
2687 .get_gdb_reg_list = armv7m_get_gdb_reg_list,
2688
2689 .read_memory = cortex_m_read_memory,
2690 .write_memory = cortex_m_write_memory,
2691 .checksum_memory = armv7m_checksum_memory,
2692 .blank_check_memory = armv7m_blank_check_memory,
2693
2694 .run_algorithm = armv7m_run_algorithm,
2695 .start_algorithm = armv7m_start_algorithm,
2696 .wait_algorithm = armv7m_wait_algorithm,
2697
2698 .add_breakpoint = cortex_m_add_breakpoint,
2699 .remove_breakpoint = cortex_m_remove_breakpoint,
2700 .add_watchpoint = cortex_m_add_watchpoint,
2701 .remove_watchpoint = cortex_m_remove_watchpoint,
2702
2703 .commands = cortex_m_command_handlers,
2704 .target_create = cortex_m_target_create,
2705 .target_jim_configure = adiv5_jim_configure,
2706 .init_target = cortex_m_init_target,
2707 .examine = cortex_m_examine,
2708 .deinit_target = cortex_m_deinit_target,
2709
2710 .profiling = cortex_m_profiling,
2711 };

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)