1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
19 ***************************************************************************/
28 #include "arm_disassembler.h"
33 * ARM "Embedded Trace Macrocell" (ETM) support -- direct JTAG access.
35 * ETM modules collect instruction and/or data trace information, compress
36 * it, and transfer it to a debugging host through either a (buffered) trace
37 * port (often a 38-pin Mictor connector) or an Embedded Trace Buffer (ETB).
39 * There are several generations of these modules. Original versions have
40 * JTAG access through a dedicated scan chain. Recent versions have added
41 * access via coprocessor instructions, memory addressing, and the ARM Debug
42 * Interface v5 (ADIv5); and phased out direct JTAG access.
44 * This code supports up to the ETMv1.3 architecture, as seen in ETM9 and
45 * most common ARM9 systems. Note: "CoreSight ETM9" implements ETMv3.2,
46 * implying non-JTAG connectivity options.
48 * Relevant documentation includes:
49 * ARM DDI 0157G ... ETM9 (r2p2) Technical Reference Manual
50 * ARM DDI 0315B ... CoreSight ETM9 (r0p1) Technical Reference Manual
51 * ARM IHI 0014O ... Embedded Trace Macrocell, Architecture Specification
62 uint8_t size
; /* low-N of 32 bits */
63 uint8_t mode
; /* RO, WO, RW */
64 uint8_t bcd_vers
; /* 1.0, 2.0, etc */
69 * Registers 0..0x7f are JTAG-addressable using scanchain 6.
70 * (Or on some processors, through coprocessor operations.)
71 * Newer versions of ETM make some W/O registers R/W, and
72 * provide definitions for some previously-unused bits.
75 /* core registers used to version/configure the ETM */
76 static const struct etm_reg_info etm_core
[] = {
77 /* NOTE: we "know" the order here ... */
78 { ETM_CONFIG
, 32, RO
, 0x10, "ETM_config", },
79 { ETM_ID
, 32, RO
, 0x20, "ETM_id", },
82 /* basic registers that are always there given the right ETM version */
83 static const struct etm_reg_info etm_basic
[] = {
84 /* ETM Trace Registers */
85 { ETM_CTRL
, 32, RW
, 0x10, "ETM_ctrl", },
86 { ETM_TRIG_EVENT
, 17, WO
, 0x10, "ETM_trig_event", },
87 { ETM_ASIC_CTRL
, 8, WO
, 0x10, "ETM_asic_ctrl", },
88 { ETM_STATUS
, 3, RO
, 0x11, "ETM_status", },
89 { ETM_SYS_CONFIG
, 9, RO
, 0x12, "ETM_sys_config", },
91 /* TraceEnable configuration */
92 { ETM_TRACE_RESOURCE_CTRL
, 32, WO
, 0x12, "ETM_trace_resource_ctrl", },
93 { ETM_TRACE_EN_CTRL2
, 16, WO
, 0x12, "ETM_trace_en_ctrl2", },
94 { ETM_TRACE_EN_EVENT
, 17, WO
, 0x10, "ETM_trace_en_event", },
95 { ETM_TRACE_EN_CTRL1
, 26, WO
, 0x10, "ETM_trace_en_ctrl1", },
97 /* ViewData configuration (data trace) */
98 { ETM_VIEWDATA_EVENT
, 17, WO
, 0x10, "ETM_viewdata_event", },
99 { ETM_VIEWDATA_CTRL1
, 32, WO
, 0x10, "ETM_viewdata_ctrl1", },
100 { ETM_VIEWDATA_CTRL2
, 32, WO
, 0x10, "ETM_viewdata_ctrl2", },
101 { ETM_VIEWDATA_CTRL3
, 17, WO
, 0x10, "ETM_viewdata_ctrl3", },
103 /* REVISIT exclude VIEWDATA_CTRL2 when it's not there */
105 { 0x78, 12, WO
, 0x20, "ETM_sync_freq", },
106 { 0x7a, 22, RO
, 0x31, "ETM_config_code_ext", },
107 { 0x7b, 32, WO
, 0x31, "ETM_ext_input_select", },
108 { 0x7c, 32, WO
, 0x34, "ETM_trace_start_stop", },
109 { 0x7d, 8, WO
, 0x34, "ETM_behavior_control", },
112 static const struct etm_reg_info etm_fifofull
[] = {
113 /* FIFOFULL configuration */
114 { ETM_FIFOFULL_REGION
, 25, WO
, 0x10, "ETM_fifofull_region", },
115 { ETM_FIFOFULL_LEVEL
, 8, WO
, 0x10, "ETM_fifofull_level", },
118 static const struct etm_reg_info etm_addr_comp
[] = {
119 /* Address comparator register pairs */
120 #define ADDR_COMPARATOR(i) \
121 { ETM_ADDR_COMPARATOR_VALUE + (i) - 1, 32, WO, 0x10, \
122 "ETM_addr_" #i "_comparator_value", }, \
123 { ETM_ADDR_ACCESS_TYPE + (i) - 1, 7, WO, 0x10, \
124 "ETM_addr_" #i "_access_type", }
142 #undef ADDR_COMPARATOR
145 static const struct etm_reg_info etm_data_comp
[] = {
146 /* Data Value Comparators (NOTE: odd addresses are reserved) */
147 #define DATA_COMPARATOR(i) \
148 { ETM_DATA_COMPARATOR_VALUE + 2*(i) - 1, 32, WO, 0x10, \
149 "ETM_data_" #i "_comparator_value", }, \
150 { ETM_DATA_COMPARATOR_MASK + 2*(i) - 1, 32, WO, 0x10, \
151 "ETM_data_" #i "_comparator_mask", }
160 #undef DATA_COMPARATOR
163 static const struct etm_reg_info etm_counters
[] = {
164 #define ETM_COUNTER(i) \
165 { ETM_COUNTER_RELOAD_VALUE + (i) - 1, 16, WO, 0x10, \
166 "ETM_counter_" #i "_reload_value", }, \
167 { ETM_COUNTER_ENABLE + (i) - 1, 18, WO, 0x10, \
168 "ETM_counter_" #i "_enable", }, \
169 { ETM_COUNTER_RELOAD_EVENT + (i) - 1, 17, WO, 0x10, \
170 "ETM_counter_" #i "_reload_event", }, \
171 { ETM_COUNTER_VALUE + (i) - 1, 16, RO, 0x10, \
172 "ETM_counter_" #i "_value", }
180 static const struct etm_reg_info etm_sequencer
[] = {
182 { ETM_SEQUENCER_EVENT + (i), 17, WO, 0x10, \
183 "ETM_sequencer_event" #i, }
184 ETM_SEQ(0), /* 1->2 */
185 ETM_SEQ(1), /* 2->1 */
186 ETM_SEQ(2), /* 2->3 */
187 ETM_SEQ(3), /* 3->1 */
188 ETM_SEQ(4), /* 3->2 */
189 ETM_SEQ(5), /* 1->3 */
192 { ETM_SEQUENCER_STATE
, 2, RO
, 0x10, "ETM_sequencer_state", },
195 static const struct etm_reg_info etm_outputs
[] = {
196 #define ETM_OUTPUT(i) \
197 { ETM_EXTERNAL_OUTPUT + (i) - 1, 17, WO, 0x10, \
198 "ETM_external_output" #i, }
208 /* registers from 0x6c..0x7f were added after ETMv1.3 */
210 /* Context ID Comparators */
211 { 0x6c, 32, RO
, 0x20, "ETM_contextid_comparator_value1", }
212 { 0x6d, 32, RO
, 0x20, "ETM_contextid_comparator_value2", }
213 { 0x6e, 32, RO
, 0x20, "ETM_contextid_comparator_value3", }
214 { 0x6f, 32, RO
, 0x20, "ETM_contextid_comparator_mask", }
217 static int etm_get_reg(struct reg
*reg
);
218 static int etm_read_reg_w_check(struct reg
*reg
,
219 uint8_t* check_value
, uint8_t* check_mask
);
220 static int etm_register_user_commands(struct command_context
*cmd_ctx
);
221 static int etm_set_reg_w_exec(struct reg
*reg
, uint8_t *buf
);
222 static int etm_write_reg(struct reg
*reg
, uint32_t value
);
224 static const struct reg_arch_type etm_scan6_type
= {
226 .set
= etm_set_reg_w_exec
,
229 /* Look up register by ID ... most ETM instances only
230 * support a subset of the possible registers.
232 static struct reg
*etm_reg_lookup(struct etm_context
*etm_ctx
, unsigned id
)
234 struct reg_cache
*cache
= etm_ctx
->reg_cache
;
237 for (i
= 0; i
< cache
->num_regs
; i
++) {
238 struct etm_reg
*reg
= cache
->reg_list
[i
].arch_info
;
240 if (reg
->reg_info
->addr
== id
)
241 return &cache
->reg_list
[i
];
244 /* caller asking for nonexistent register is a bug! */
245 /* REVISIT say which of the N targets was involved */
246 LOG_ERROR("ETM: register 0x%02x not available", id
);
250 static void etm_reg_add(unsigned bcd_vers
, struct arm_jtag
*jtag_info
,
251 struct reg_cache
*cache
, struct etm_reg
*ereg
,
252 const struct etm_reg_info
*r
, unsigned nreg
)
254 struct reg
*reg
= cache
->reg_list
;
256 reg
+= cache
->num_regs
;
257 ereg
+= cache
->num_regs
;
259 /* add up to "nreg" registers from "r", if supported by this
260 * version of the ETM, to the specified cache.
262 for (; nreg
--; r
++) {
264 /* this ETM may be too old to have some registers */
265 if (r
->bcd_vers
> bcd_vers
)
270 reg
->value
= &ereg
->value
;
271 reg
->arch_info
= ereg
;
272 reg
->type
= &etm_scan6_type
;
277 ereg
->jtag_info
= jtag_info
;
282 struct reg_cache
*etm_build_reg_cache(struct target
*target
,
283 struct arm_jtag
*jtag_info
, struct etm_context
*etm_ctx
)
285 struct reg_cache
*reg_cache
= malloc(sizeof(struct reg_cache
));
286 struct reg
*reg_list
= NULL
;
287 struct etm_reg
*arch_info
= NULL
;
288 unsigned bcd_vers
, config
;
290 /* the actual registers are kept in two arrays */
291 reg_list
= calloc(128, sizeof(struct reg
));
292 arch_info
= calloc(128, sizeof(struct etm_reg
));
294 /* fill in values for the reg cache */
295 reg_cache
->name
= "etm registers";
296 reg_cache
->next
= NULL
;
297 reg_cache
->reg_list
= reg_list
;
298 reg_cache
->num_regs
= 0;
300 /* add ETM_CONFIG, then parse its values to see
301 * which other registers exist in this ETM
303 etm_reg_add(0x10, jtag_info
, reg_cache
, arch_info
,
306 etm_get_reg(reg_list
);
307 etm_ctx
->config
= buf_get_u32((void *)&arch_info
->value
, 0, 32);
308 config
= etm_ctx
->config
;
310 /* figure ETM version then add base registers */
311 if (config
& (1 << 31)) {
313 LOG_WARNING("ETMv2+ support is incomplete");
315 /* REVISIT more registers may exist; they may now be
316 * readable; more register bits have defined meanings;
317 * don't presume trace start/stop support is present;
318 * and include any context ID comparator registers.
320 etm_reg_add(0x20, jtag_info
, reg_cache
, arch_info
,
322 etm_get_reg(reg_list
+ 1);
323 etm_ctx
->id
= buf_get_u32(
324 (void *)&arch_info
[1].value
, 0, 32);
325 LOG_DEBUG("ETM ID: %08x", (unsigned) etm_ctx
->id
);
326 bcd_vers
= 0x10 + (((etm_ctx
->id
) >> 4) & 0xff);
329 switch (config
>> 28) {
346 LOG_WARNING("Bad ETMv1 protocol %d", config
>> 28);
350 etm_ctx
->bcd_vers
= bcd_vers
;
351 LOG_INFO("ETM v%d.%d", bcd_vers
>> 4, bcd_vers
& 0xf);
353 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
354 etm_basic
, ARRAY_SIZE(etm_basic
));
356 /* address and data comparators; counters; outputs */
357 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
358 etm_addr_comp
, 4 * (0x0f & (config
>> 0)));
359 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
360 etm_data_comp
, 2 * (0x0f & (config
>> 4)));
361 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
362 etm_counters
, 4 * (0x07 & (config
>> 13)));
363 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
364 etm_outputs
, (0x07 & (config
>> 20)));
366 /* FIFOFULL presence is optional
367 * REVISIT for ETMv1.2 and later, don't bother adding this
368 * unless ETM_SYS_CONFIG says it's also *supported* ...
370 if (config
& (1 << 23))
371 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
372 etm_fifofull
, ARRAY_SIZE(etm_fifofull
));
374 /* sequencer is optional (for state-dependant triggering) */
375 if (config
& (1 << 16))
376 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
377 etm_sequencer
, ARRAY_SIZE(etm_sequencer
));
379 /* REVISIT could realloc and likely save half the memory
380 * in the two chunks we allocated...
383 /* the ETM might have an ETB connected */
384 if (strcmp(etm_ctx
->capture_driver
->name
, "etb") == 0)
386 struct etb
*etb
= etm_ctx
->capture_driver_priv
;
390 LOG_ERROR("etb selected as etm capture driver, but no ETB configured");
394 reg_cache
->next
= etb_build_reg_cache(etb
);
396 etb
->reg_cache
= reg_cache
->next
;
399 etm_ctx
->reg_cache
= reg_cache
;
409 static int etm_read_reg(struct reg
*reg
)
411 return etm_read_reg_w_check(reg
, NULL
, NULL
);
414 static int etm_store_reg(struct reg
*reg
)
416 return etm_write_reg(reg
, buf_get_u32(reg
->value
, 0, reg
->size
));
419 int etm_setup(struct target
*target
)
422 uint32_t etm_ctrl_value
;
423 struct arm
*arm
= target_to_arm(target
);
424 struct etm_context
*etm_ctx
= arm
->etm
;
425 struct reg
*etm_ctrl_reg
;
427 etm_ctrl_reg
= etm_reg_lookup(etm_ctx
, ETM_CTRL
);
431 /* initialize some ETM control register settings */
432 etm_get_reg(etm_ctrl_reg
);
433 etm_ctrl_value
= buf_get_u32(etm_ctrl_reg
->value
, 0, etm_ctrl_reg
->size
);
435 /* clear the ETM powerdown bit (0) */
436 etm_ctrl_value
&= ~0x1;
438 /* configure port width (21,6:4), mode (13,17:16) and
439 * for older modules clocking (13)
441 etm_ctrl_value
= (etm_ctrl_value
442 & ~ETM_PORT_WIDTH_MASK
443 & ~ETM_PORT_MODE_MASK
444 & ~ETM_PORT_CLOCK_MASK
)
447 buf_set_u32(etm_ctrl_reg
->value
, 0, etm_ctrl_reg
->size
, etm_ctrl_value
);
448 etm_store_reg(etm_ctrl_reg
);
450 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
453 /* REVISIT for ETMv3.0 and later, read ETM_sys_config to
454 * verify that those width and mode settings are OK ...
457 if ((retval
= etm_ctx
->capture_driver
->init(etm_ctx
)) != ERROR_OK
)
459 LOG_ERROR("ETM capture driver initialization failed");
465 static int etm_get_reg(struct reg
*reg
)
469 if ((retval
= etm_read_reg(reg
)) != ERROR_OK
)
471 LOG_ERROR("BUG: error scheduling etm register read");
475 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
477 LOG_ERROR("register read failed");
484 static int etm_read_reg_w_check(struct reg
*reg
,
485 uint8_t* check_value
, uint8_t* check_mask
)
487 struct etm_reg
*etm_reg
= reg
->arch_info
;
488 const struct etm_reg_info
*r
= etm_reg
->reg_info
;
489 uint8_t reg_addr
= r
->addr
& 0x7f;
490 struct scan_field fields
[3];
492 if (etm_reg
->reg_info
->mode
== WO
) {
493 LOG_ERROR("BUG: can't read write-only register %s", r
->name
);
494 return ERROR_INVALID_ARGUMENTS
;
497 LOG_DEBUG("%s (%u)", r
->name
, reg_addr
);
499 jtag_set_end_state(TAP_IDLE
);
500 arm_jtag_scann(etm_reg
->jtag_info
, 0x6);
501 arm_jtag_set_instr(etm_reg
->jtag_info
, etm_reg
->jtag_info
->intest_instr
, NULL
);
503 fields
[0].tap
= etm_reg
->jtag_info
->tap
;
504 fields
[0].num_bits
= 32;
505 fields
[0].out_value
= reg
->value
;
506 fields
[0].in_value
= NULL
;
507 fields
[0].check_value
= NULL
;
508 fields
[0].check_mask
= NULL
;
510 fields
[1].tap
= etm_reg
->jtag_info
->tap
;
511 fields
[1].num_bits
= 7;
512 fields
[1].out_value
= malloc(1);
513 buf_set_u32(fields
[1].out_value
, 0, 7, reg_addr
);
514 fields
[1].in_value
= NULL
;
515 fields
[1].check_value
= NULL
;
516 fields
[1].check_mask
= NULL
;
518 fields
[2].tap
= etm_reg
->jtag_info
->tap
;
519 fields
[2].num_bits
= 1;
520 fields
[2].out_value
= malloc(1);
521 buf_set_u32(fields
[2].out_value
, 0, 1, 0);
522 fields
[2].in_value
= NULL
;
523 fields
[2].check_value
= NULL
;
524 fields
[2].check_mask
= NULL
;
526 jtag_add_dr_scan(3, fields
, jtag_get_end_state());
528 fields
[0].in_value
= reg
->value
;
529 fields
[0].check_value
= check_value
;
530 fields
[0].check_mask
= check_mask
;
532 jtag_add_dr_scan_check(3, fields
, jtag_get_end_state());
534 free(fields
[1].out_value
);
535 free(fields
[2].out_value
);
540 static int etm_set_reg(struct reg
*reg
, uint32_t value
)
544 if ((retval
= etm_write_reg(reg
, value
)) != ERROR_OK
)
546 LOG_ERROR("BUG: error scheduling etm register write");
550 buf_set_u32(reg
->value
, 0, reg
->size
, value
);
557 static int etm_set_reg_w_exec(struct reg
*reg
, uint8_t *buf
)
561 etm_set_reg(reg
, buf_get_u32(buf
, 0, reg
->size
));
563 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
565 LOG_ERROR("register write failed");
571 static int etm_write_reg(struct reg
*reg
, uint32_t value
)
573 struct etm_reg
*etm_reg
= reg
->arch_info
;
574 const struct etm_reg_info
*r
= etm_reg
->reg_info
;
575 uint8_t reg_addr
= r
->addr
& 0x7f;
576 struct scan_field fields
[3];
578 if (etm_reg
->reg_info
->mode
== RO
) {
579 LOG_ERROR("BUG: can't write read--only register %s", r
->name
);
580 return ERROR_INVALID_ARGUMENTS
;
583 LOG_DEBUG("%s (%u): 0x%8.8" PRIx32
"", r
->name
, reg_addr
, value
);
585 jtag_set_end_state(TAP_IDLE
);
586 arm_jtag_scann(etm_reg
->jtag_info
, 0x6);
587 arm_jtag_set_instr(etm_reg
->jtag_info
, etm_reg
->jtag_info
->intest_instr
, NULL
);
589 fields
[0].tap
= etm_reg
->jtag_info
->tap
;
590 fields
[0].num_bits
= 32;
592 fields
[0].out_value
= tmp1
;
593 buf_set_u32(fields
[0].out_value
, 0, 32, value
);
594 fields
[0].in_value
= NULL
;
596 fields
[1].tap
= etm_reg
->jtag_info
->tap
;
597 fields
[1].num_bits
= 7;
599 fields
[1].out_value
= &tmp2
;
600 buf_set_u32(fields
[1].out_value
, 0, 7, reg_addr
);
601 fields
[1].in_value
= NULL
;
603 fields
[2].tap
= etm_reg
->jtag_info
->tap
;
604 fields
[2].num_bits
= 1;
606 fields
[2].out_value
= &tmp3
;
607 buf_set_u32(fields
[2].out_value
, 0, 1, 1);
608 fields
[2].in_value
= NULL
;
610 jtag_add_dr_scan(3, fields
, jtag_get_end_state());
616 /* ETM trace analysis functionality
619 extern struct etm_capture_driver etm_dummy_capture_driver
;
620 #if BUILD_OOCD_TRACE == 1
621 extern struct etm_capture_driver oocd_trace_capture_driver
;
624 static struct etm_capture_driver
*etm_capture_drivers
[] =
627 &etm_dummy_capture_driver
,
628 #if BUILD_OOCD_TRACE == 1
629 &oocd_trace_capture_driver
,
634 static int etm_read_instruction(struct etm_context
*ctx
, struct arm_instruction
*instruction
)
643 return ERROR_TRACE_IMAGE_UNAVAILABLE
;
645 /* search for the section the current instruction belongs to */
646 for (i
= 0; i
< ctx
->image
->num_sections
; i
++)
648 if ((ctx
->image
->sections
[i
].base_address
<= ctx
->current_pc
) &&
649 (ctx
->image
->sections
[i
].base_address
+ ctx
->image
->sections
[i
].size
> ctx
->current_pc
))
658 /* current instruction couldn't be found in the image */
659 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE
;
662 if (ctx
->core_state
== ARMV4_5_STATE_ARM
)
665 if ((retval
= image_read_section(ctx
->image
, section
,
666 ctx
->current_pc
- ctx
->image
->sections
[section
].base_address
,
667 4, buf
, &size_read
)) != ERROR_OK
)
669 LOG_ERROR("error while reading instruction: %i", retval
);
670 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE
;
672 opcode
= target_buffer_get_u32(ctx
->target
, buf
);
673 arm_evaluate_opcode(opcode
, ctx
->current_pc
, instruction
);
675 else if (ctx
->core_state
== ARMV4_5_STATE_THUMB
)
678 if ((retval
= image_read_section(ctx
->image
, section
,
679 ctx
->current_pc
- ctx
->image
->sections
[section
].base_address
,
680 2, buf
, &size_read
)) != ERROR_OK
)
682 LOG_ERROR("error while reading instruction: %i", retval
);
683 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE
;
685 opcode
= target_buffer_get_u16(ctx
->target
, buf
);
686 thumb_evaluate_opcode(opcode
, ctx
->current_pc
, instruction
);
688 else if (ctx
->core_state
== ARMV4_5_STATE_JAZELLE
)
690 LOG_ERROR("BUG: tracing of jazelle code not supported");
695 LOG_ERROR("BUG: unknown core state encountered");
702 static int etmv1_next_packet(struct etm_context
*ctx
, uint8_t *packet
, int apo
)
704 while (ctx
->data_index
< ctx
->trace_depth
)
706 /* if the caller specified an address packet offset, skip until the
707 * we reach the n-th cycle marked with tracesync */
710 if (ctx
->trace_data
[ctx
->data_index
].flags
& ETMV1_TRACESYNC_CYCLE
)
721 /* no tracedata output during a TD cycle
722 * or in a trigger cycle */
723 if ((ctx
->trace_data
[ctx
->data_index
].pipestat
== STAT_TD
)
724 || (ctx
->trace_data
[ctx
->data_index
].flags
& ETMV1_TRIGGER_CYCLE
))
731 if ((ctx
->portmode
& ETM_PORT_WIDTH_MASK
) == ETM_PORT_16BIT
)
733 if (ctx
->data_half
== 0)
735 *packet
= ctx
->trace_data
[ctx
->data_index
].packet
& 0xff;
740 *packet
= (ctx
->trace_data
[ctx
->data_index
].packet
& 0xff00) >> 8;
745 else if ((ctx
->portmode
& ETM_PORT_WIDTH_MASK
) == ETM_PORT_8BIT
)
747 *packet
= ctx
->trace_data
[ctx
->data_index
].packet
& 0xff;
752 /* on a 4-bit port, a packet will be output during two consecutive cycles */
753 if (ctx
->data_index
> (ctx
->trace_depth
- 2))
756 *packet
= ctx
->trace_data
[ctx
->data_index
].packet
& 0xf;
757 *packet
|= (ctx
->trace_data
[ctx
->data_index
+ 1].packet
& 0xf) << 4;
758 ctx
->data_index
+= 2;
767 static int etmv1_branch_address(struct etm_context
*ctx
)
775 /* quit analysis if less than two cycles are left in the trace
776 * because we can't extract the APO */
777 if (ctx
->data_index
> (ctx
->trace_depth
- 2))
780 /* a BE could be output during an APO cycle, skip the current
781 * and continue with the new one */
782 if (ctx
->trace_data
[ctx
->pipe_index
+ 1].pipestat
& 0x4)
784 if (ctx
->trace_data
[ctx
->pipe_index
+ 2].pipestat
& 0x4)
787 /* address packet offset encoded in the next two cycles' pipestat bits */
788 apo
= ctx
->trace_data
[ctx
->pipe_index
+ 1].pipestat
& 0x3;
789 apo
|= (ctx
->trace_data
[ctx
->pipe_index
+ 2].pipestat
& 0x3) << 2;
791 /* count number of tracesync cycles between current pipe_index and data_index
792 * i.e. the number of tracesyncs that data_index already passed by
793 * to subtract them from the APO */
794 for (i
= ctx
->pipe_index
; i
< ctx
->data_index
; i
++)
796 if (ctx
->trace_data
[ctx
->pipe_index
+ 1].pipestat
& ETMV1_TRACESYNC_CYCLE
)
800 /* extract up to four 7-bit packets */
802 if ((retval
= etmv1_next_packet(ctx
, &packet
, (shift
== 0) ? apo
+ 1 : 0)) != 0)
804 ctx
->last_branch
&= ~(0x7f << shift
);
805 ctx
->last_branch
|= (packet
& 0x7f) << shift
;
807 } while ((packet
& 0x80) && (shift
< 28));
809 /* one last packet holding 4 bits of the address, plus the branch reason code */
810 if ((shift
== 28) && (packet
& 0x80))
812 if ((retval
= etmv1_next_packet(ctx
, &packet
, 0)) != 0)
814 ctx
->last_branch
&= 0x0fffffff;
815 ctx
->last_branch
|= (packet
& 0x0f) << 28;
816 ctx
->last_branch_reason
= (packet
& 0x70) >> 4;
821 ctx
->last_branch_reason
= 0;
829 /* if a full address was output, we might have branched into Jazelle state */
830 if ((shift
== 32) && (packet
& 0x80))
832 ctx
->core_state
= ARMV4_5_STATE_JAZELLE
;
836 /* if we didn't branch into Jazelle state, the current processor state is
837 * encoded in bit 0 of the branch target address */
838 if (ctx
->last_branch
& 0x1)
840 ctx
->core_state
= ARMV4_5_STATE_THUMB
;
841 ctx
->last_branch
&= ~0x1;
845 ctx
->core_state
= ARMV4_5_STATE_ARM
;
846 ctx
->last_branch
&= ~0x3;
853 static int etmv1_data(struct etm_context
*ctx
, int size
, uint32_t *data
)
859 for (j
= 0; j
< size
; j
++)
861 if ((retval
= etmv1_next_packet(ctx
, &buf
[j
], 0)) != 0)
867 LOG_ERROR("TODO: add support for 64-bit values");
871 *data
= target_buffer_get_u32(ctx
->target
, buf
);
873 *data
= target_buffer_get_u16(ctx
->target
, buf
);
882 static int etmv1_analyze_trace(struct etm_context
*ctx
, struct command_context
*cmd_ctx
)
885 struct arm_instruction instruction
;
887 /* read the trace data if it wasn't read already */
888 if (ctx
->trace_depth
== 0)
889 ctx
->capture_driver
->read_trace(ctx
);
891 /* start at the beginning of the captured trace */
896 /* neither the PC nor the data pointer are valid */
900 while (ctx
->pipe_index
< ctx
->trace_depth
)
902 uint8_t pipestat
= ctx
->trace_data
[ctx
->pipe_index
].pipestat
;
903 uint32_t next_pc
= ctx
->current_pc
;
904 uint32_t old_data_index
= ctx
->data_index
;
905 uint32_t old_data_half
= ctx
->data_half
;
906 uint32_t old_index
= ctx
->pipe_index
;
907 uint32_t last_instruction
= ctx
->last_instruction
;
909 int current_pc_ok
= ctx
->pc_ok
;
911 if (ctx
->trace_data
[ctx
->pipe_index
].flags
& ETMV1_TRIGGER_CYCLE
)
913 command_print(cmd_ctx
, "--- trigger ---");
916 /* instructions execute in IE/D or BE/D cycles */
917 if ((pipestat
== STAT_IE
) || (pipestat
== STAT_ID
))
918 ctx
->last_instruction
= ctx
->pipe_index
;
920 /* if we don't have a valid pc skip until we reach an indirect branch */
921 if ((!ctx
->pc_ok
) && (pipestat
!= STAT_BE
))
927 /* any indirect branch could have interrupted instruction flow
928 * - the branch reason code could indicate a trace discontinuity
929 * - a branch to the exception vectors indicates an exception
931 if ((pipestat
== STAT_BE
) || (pipestat
== STAT_BD
))
933 /* backup current data index, to be able to consume the branch address
934 * before examining data address and values
936 old_data_index
= ctx
->data_index
;
937 old_data_half
= ctx
->data_half
;
939 ctx
->last_instruction
= ctx
->pipe_index
;
941 if ((retval
= etmv1_branch_address(ctx
)) != 0)
943 /* negative return value from etmv1_branch_address means we ran out of packets,
944 * quit analysing the trace */
948 /* a positive return values means the current branch was abandoned,
949 * and a new branch was encountered in cycle ctx->pipe_index + retval;
951 LOG_WARNING("abandoned branch encountered, correctnes of analysis uncertain");
952 ctx
->pipe_index
+= retval
;
956 /* skip over APO cycles */
957 ctx
->pipe_index
+= 2;
959 switch (ctx
->last_branch_reason
)
961 case 0x0: /* normal PC change */
962 next_pc
= ctx
->last_branch
;
964 case 0x1: /* tracing enabled */
965 command_print(cmd_ctx
, "--- tracing enabled at 0x%8.8" PRIx32
" ---", ctx
->last_branch
);
966 ctx
->current_pc
= ctx
->last_branch
;
970 case 0x2: /* trace restarted after FIFO overflow */
971 command_print(cmd_ctx
, "--- trace restarted after FIFO overflow at 0x%8.8" PRIx32
" ---", ctx
->last_branch
);
972 ctx
->current_pc
= ctx
->last_branch
;
976 case 0x3: /* exit from debug state */
977 command_print(cmd_ctx
, "--- exit from debug state at 0x%8.8" PRIx32
" ---", ctx
->last_branch
);
978 ctx
->current_pc
= ctx
->last_branch
;
982 case 0x4: /* periodic synchronization point */
983 next_pc
= ctx
->last_branch
;
984 /* if we had no valid PC prior to this synchronization point,
985 * we have to move on with the next trace cycle
989 command_print(cmd_ctx
, "--- periodic synchronization point at 0x%8.8" PRIx32
" ---", next_pc
);
990 ctx
->current_pc
= next_pc
;
995 default: /* reserved */
996 LOG_ERROR("BUG: branch reason code 0x%" PRIx32
" is reserved", ctx
->last_branch_reason
);
1000 /* if we got here the branch was a normal PC change
1001 * (or a periodic synchronization point, which means the same for that matter)
1002 * if we didn't accquire a complete PC continue with the next cycle
1007 /* indirect branch to the exception vector means an exception occured */
1008 if ((ctx
->last_branch
<= 0x20)
1009 || ((ctx
->last_branch
>= 0xffff0000) && (ctx
->last_branch
<= 0xffff0020)))
1011 if ((ctx
->last_branch
& 0xff) == 0x10)
1013 command_print(cmd_ctx
, "data abort");
1017 command_print(cmd_ctx
, "exception vector 0x%2.2" PRIx32
"", ctx
->last_branch
);
1018 ctx
->current_pc
= ctx
->last_branch
;
1025 /* an instruction was executed (or not, depending on the condition flags)
1026 * retrieve it from the image for displaying */
1027 if (ctx
->pc_ok
&& (pipestat
!= STAT_WT
) && (pipestat
!= STAT_TD
) &&
1028 !(((pipestat
== STAT_BE
) || (pipestat
== STAT_BD
)) &&
1029 ((ctx
->last_branch_reason
!= 0x0) && (ctx
->last_branch_reason
!= 0x4))))
1031 if ((retval
= etm_read_instruction(ctx
, &instruction
)) != ERROR_OK
)
1033 /* can't continue tracing with no image available */
1034 if (retval
== ERROR_TRACE_IMAGE_UNAVAILABLE
)
1038 else if (retval
== ERROR_TRACE_INSTRUCTION_UNAVAILABLE
)
1040 /* TODO: handle incomplete images
1041 * for now we just quit the analsysis*/
1046 cycles
= old_index
- last_instruction
;
1049 if ((pipestat
== STAT_ID
) || (pipestat
== STAT_BD
))
1051 uint32_t new_data_index
= ctx
->data_index
;
1052 uint32_t new_data_half
= ctx
->data_half
;
1054 /* in case of a branch with data, the branch target address was consumed before
1055 * we temporarily go back to the saved data index */
1056 if (pipestat
== STAT_BD
)
1058 ctx
->data_index
= old_data_index
;
1059 ctx
->data_half
= old_data_half
;
1062 if (ctx
->tracemode
& ETMV1_TRACE_ADDR
)
1068 if ((retval
= etmv1_next_packet(ctx
, &packet
, 0)) != 0)
1069 return ERROR_ETM_ANALYSIS_FAILED
;
1070 ctx
->last_ptr
&= ~(0x7f << shift
);
1071 ctx
->last_ptr
|= (packet
& 0x7f) << shift
;
1073 } while ((packet
& 0x80) && (shift
< 32));
1080 command_print(cmd_ctx
, "address: 0x%8.8" PRIx32
"", ctx
->last_ptr
);
1084 if (ctx
->tracemode
& ETMV1_TRACE_DATA
)
1086 if ((instruction
.type
== ARM_LDM
) || (instruction
.type
== ARM_STM
))
1089 for (i
= 0; i
< 16; i
++)
1091 if (instruction
.info
.load_store_multiple
.register_list
& (1 << i
))
1094 if (etmv1_data(ctx
, 4, &data
) != 0)
1095 return ERROR_ETM_ANALYSIS_FAILED
;
1096 command_print(cmd_ctx
, "data: 0x%8.8" PRIx32
"", data
);
1100 else if ((instruction
.type
>= ARM_LDR
) && (instruction
.type
<= ARM_STRH
))
1103 if (etmv1_data(ctx
, arm_access_size(&instruction
), &data
) != 0)
1104 return ERROR_ETM_ANALYSIS_FAILED
;
1105 command_print(cmd_ctx
, "data: 0x%8.8" PRIx32
"", data
);
1109 /* restore data index after consuming BD address and data */
1110 if (pipestat
== STAT_BD
)
1112 ctx
->data_index
= new_data_index
;
1113 ctx
->data_half
= new_data_half
;
1118 if ((pipestat
== STAT_IE
) || (pipestat
== STAT_ID
))
1120 if (((instruction
.type
== ARM_B
) ||
1121 (instruction
.type
== ARM_BL
) ||
1122 (instruction
.type
== ARM_BLX
)) &&
1123 (instruction
.info
.b_bl_bx_blx
.target_address
!= 0xffffffff))
1125 next_pc
= instruction
.info
.b_bl_bx_blx
.target_address
;
1129 next_pc
+= (ctx
->core_state
== ARMV4_5_STATE_ARM
) ? 4 : 2;
1132 else if (pipestat
== STAT_IN
)
1134 next_pc
+= (ctx
->core_state
== ARMV4_5_STATE_ARM
) ? 4 : 2;
1137 if ((pipestat
!= STAT_TD
) && (pipestat
!= STAT_WT
))
1139 char cycles_text
[32] = "";
1141 /* if the trace was captured with cycle accurate tracing enabled,
1142 * output the number of cycles since the last executed instruction
1144 if (ctx
->tracemode
& ETMV1_CYCLE_ACCURATE
)
1146 snprintf(cycles_text
, 32, " (%i %s)",
1148 (cycles
== 1) ? "cycle" : "cycles");
1151 command_print(cmd_ctx
, "%s%s%s",
1153 (pipestat
== STAT_IN
) ? " (not executed)" : "",
1156 ctx
->current_pc
= next_pc
;
1158 /* packets for an instruction don't start on or before the preceding
1159 * functional pipestat (i.e. other than WT or TD)
1161 if (ctx
->data_index
<= ctx
->pipe_index
)
1163 ctx
->data_index
= ctx
->pipe_index
+ 1;
1168 ctx
->pipe_index
+= 1;
1174 static COMMAND_HELPER(handle_etm_tracemode_command_update
,
1175 etmv1_tracemode_t
*mode
)
1177 etmv1_tracemode_t tracemode
;
1179 /* what parts of data access are traced? */
1180 if (strcmp(CMD_ARGV
[0], "none") == 0)
1181 tracemode
= ETMV1_TRACE_NONE
;
1182 else if (strcmp(CMD_ARGV
[0], "data") == 0)
1183 tracemode
= ETMV1_TRACE_DATA
;
1184 else if (strcmp(CMD_ARGV
[0], "address") == 0)
1185 tracemode
= ETMV1_TRACE_ADDR
;
1186 else if (strcmp(CMD_ARGV
[0], "all") == 0)
1187 tracemode
= ETMV1_TRACE_DATA
| ETMV1_TRACE_ADDR
;
1190 command_print(CMD_CTX
, "invalid option '%s'", CMD_ARGV
[0]);
1191 return ERROR_INVALID_ARGUMENTS
;
1195 COMMAND_PARSE_NUMBER(u8
, CMD_ARGV
[1], context_id
);
1199 tracemode
|= ETMV1_CONTEXTID_NONE
;
1202 tracemode
|= ETMV1_CONTEXTID_8
;
1205 tracemode
|= ETMV1_CONTEXTID_16
;
1208 tracemode
|= ETMV1_CONTEXTID_32
;
1211 command_print(CMD_CTX
, "invalid option '%s'", CMD_ARGV
[1]);
1212 return ERROR_INVALID_ARGUMENTS
;
1215 bool etmv1_cycle_accurate
;
1216 COMMAND_PARSE_ENABLE(CMD_ARGV
[2], etmv1_cycle_accurate
);
1217 if (etmv1_cycle_accurate
)
1218 tracemode
|= ETMV1_CYCLE_ACCURATE
;
1220 bool etmv1_branch_output
;
1221 COMMAND_PARSE_ENABLE(CMD_ARGV
[3], etmv1_branch_output
);
1222 tracemode
|= ETMV1_BRANCH_OUTPUT
;
1225 * - CPRT tracing (coprocessor register transfers)
1226 * - debug request (causes debug entry on trigger)
1227 * - stall on FIFOFULL (preventing tracedata lossage)
1234 COMMAND_HANDLER(handle_etm_tracemode_command
)
1236 struct target
*target
= get_current_target(CMD_CTX
);
1237 struct arm
*arm
= target_to_arm(target
);
1238 struct etm_context
*etm
;
1241 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1247 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1251 etmv1_tracemode_t tracemode
= etm
->tracemode
;
1258 CALL_COMMAND_HANDLER(handle_etm_tracemode_command_update
, &tracemode
);
1261 command_print(CMD_CTX
, "usage: configure trace mode "
1262 "<none | data | address | all> "
1263 "<context id bits> <cycle accurate> <branch output>");
1268 * todo: fail if parameters were invalid for this hardware,
1269 * or couldn't be written; display actual hardware state...
1272 command_print(CMD_CTX
, "current tracemode configuration:");
1274 switch (tracemode
& ETMV1_TRACE_MASK
)
1276 case ETMV1_TRACE_NONE
:
1277 command_print(CMD_CTX
, "data tracing: none");
1279 case ETMV1_TRACE_DATA
:
1280 command_print(CMD_CTX
, "data tracing: data only");
1282 case ETMV1_TRACE_ADDR
:
1283 command_print(CMD_CTX
, "data tracing: address only");
1285 case ETMV1_TRACE_DATA
| ETMV1_TRACE_ADDR
:
1286 command_print(CMD_CTX
, "data tracing: address and data");
1290 switch (tracemode
& ETMV1_CONTEXTID_MASK
)
1292 case ETMV1_CONTEXTID_NONE
:
1293 command_print(CMD_CTX
, "contextid tracing: none");
1295 case ETMV1_CONTEXTID_8
:
1296 command_print(CMD_CTX
, "contextid tracing: 8 bit");
1298 case ETMV1_CONTEXTID_16
:
1299 command_print(CMD_CTX
, "contextid tracing: 16 bit");
1301 case ETMV1_CONTEXTID_32
:
1302 command_print(CMD_CTX
, "contextid tracing: 32 bit");
1306 if (tracemode
& ETMV1_CYCLE_ACCURATE
)
1308 command_print(CMD_CTX
, "cycle-accurate tracing enabled");
1312 command_print(CMD_CTX
, "cycle-accurate tracing disabled");
1315 if (tracemode
& ETMV1_BRANCH_OUTPUT
)
1317 command_print(CMD_CTX
, "full branch address output enabled");
1321 command_print(CMD_CTX
, "full branch address output disabled");
1324 /* only update ETM_CTRL register if tracemode changed */
1325 if (etm
->tracemode
!= tracemode
)
1327 struct reg
*etm_ctrl_reg
;
1329 etm_ctrl_reg
= etm_reg_lookup(etm
, ETM_CTRL
);
1333 etm_get_reg(etm_ctrl_reg
);
1335 buf_set_u32(etm_ctrl_reg
->value
, 2, 2, tracemode
& ETMV1_TRACE_MASK
);
1336 buf_set_u32(etm_ctrl_reg
->value
, 14, 2, (tracemode
& ETMV1_CONTEXTID_MASK
) >> 4);
1337 buf_set_u32(etm_ctrl_reg
->value
, 12, 1, (tracemode
& ETMV1_CYCLE_ACCURATE
) >> 8);
1338 buf_set_u32(etm_ctrl_reg
->value
, 8, 1, (tracemode
& ETMV1_BRANCH_OUTPUT
) >> 9);
1339 etm_store_reg(etm_ctrl_reg
);
1341 etm
->tracemode
= tracemode
;
1343 /* invalidate old trace data */
1344 etm
->capture_status
= TRACE_IDLE
;
1345 if (etm
->trace_depth
> 0)
1347 free(etm
->trace_data
);
1348 etm
->trace_data
= NULL
;
1350 etm
->trace_depth
= 0;
1356 COMMAND_HANDLER(handle_etm_config_command
)
1358 struct target
*target
;
1360 etm_portmode_t portmode
= 0x0;
1361 struct etm_context
*etm_ctx
;
1365 return ERROR_COMMAND_SYNTAX_ERROR
;
1367 target
= get_target(CMD_ARGV
[0]);
1370 LOG_ERROR("target '%s' not defined", CMD_ARGV
[0]);
1374 arm
= target_to_arm(target
);
1376 command_print(CMD_CTX
, "target '%s' is '%s'; not an ARM",
1377 target
->cmd_name
, target_type_name(target
));
1381 /* FIXME for ETMv3.0 and above -- and we don't yet know what ETM
1382 * version we'll be using!! -- so we can't know how to validate
1383 * params yet. "etm config" should likely be *AFTER* hookup...
1385 * - Many more widths might be supported ... and we can easily
1386 * check whether our setting "took".
1388 * - The "clock" and "mode" bits are interpreted differently.
1389 * See ARM IHI 0014O table 2-17 for the old behavior, and
1390 * table 2-18 for the new. With ETB it's best to specify
1394 COMMAND_PARSE_NUMBER(u8
, CMD_ARGV
[1], port_width
);
1397 /* before ETMv3.0 */
1399 portmode
|= ETM_PORT_4BIT
;
1402 portmode
|= ETM_PORT_8BIT
;
1405 portmode
|= ETM_PORT_16BIT
;
1407 /* ETMv3.0 and later*/
1409 portmode
|= ETM_PORT_24BIT
;
1412 portmode
|= ETM_PORT_32BIT
;
1415 portmode
|= ETM_PORT_48BIT
;
1418 portmode
|= ETM_PORT_64BIT
;
1421 portmode
|= ETM_PORT_1BIT
;
1424 portmode
|= ETM_PORT_2BIT
;
1427 command_print(CMD_CTX
,
1428 "unsupported ETM port width '%s'", CMD_ARGV
[1]);
1432 if (strcmp("normal", CMD_ARGV
[2]) == 0)
1434 portmode
|= ETM_PORT_NORMAL
;
1436 else if (strcmp("multiplexed", CMD_ARGV
[2]) == 0)
1438 portmode
|= ETM_PORT_MUXED
;
1440 else if (strcmp("demultiplexed", CMD_ARGV
[2]) == 0)
1442 portmode
|= ETM_PORT_DEMUXED
;
1446 command_print(CMD_CTX
, "unsupported ETM port mode '%s', must be 'normal', 'multiplexed' or 'demultiplexed'", CMD_ARGV
[2]);
1450 if (strcmp("half", CMD_ARGV
[3]) == 0)
1452 portmode
|= ETM_PORT_HALF_CLOCK
;
1454 else if (strcmp("full", CMD_ARGV
[3]) == 0)
1456 portmode
|= ETM_PORT_FULL_CLOCK
;
1460 command_print(CMD_CTX
, "unsupported ETM port clocking '%s', must be 'full' or 'half'", CMD_ARGV
[3]);
1464 etm_ctx
= calloc(1, sizeof(struct etm_context
));
1466 LOG_DEBUG("out of memory");
1470 for (i
= 0; etm_capture_drivers
[i
]; i
++)
1472 if (strcmp(CMD_ARGV
[4], etm_capture_drivers
[i
]->name
) == 0)
1474 int retval
= register_commands(CMD_CTX
, NULL
,
1475 etm_capture_drivers
[i
]->commands
);
1476 if (ERROR_OK
!= retval
)
1482 etm_ctx
->capture_driver
= etm_capture_drivers
[i
];
1488 if (!etm_capture_drivers
[i
])
1490 /* no supported capture driver found, don't register an ETM */
1492 LOG_ERROR("trace capture driver '%s' not found", CMD_ARGV
[4]);
1496 etm_ctx
->target
= target
;
1497 etm_ctx
->trigger_percent
= 50;
1498 etm_ctx
->trace_data
= NULL
;
1499 etm_ctx
->portmode
= portmode
;
1500 etm_ctx
->core_state
= ARMV4_5_STATE_ARM
;
1504 return etm_register_user_commands(CMD_CTX
);
1507 COMMAND_HANDLER(handle_etm_info_command
)
1509 struct target
*target
;
1511 struct etm_context
*etm
;
1512 struct reg
*etm_sys_config_reg
;
1516 target
= get_current_target(CMD_CTX
);
1517 arm
= target_to_arm(target
);
1520 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1527 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1531 command_print(CMD_CTX
, "ETM v%d.%d",
1532 etm
->bcd_vers
>> 4, etm
->bcd_vers
& 0xf);
1533 command_print(CMD_CTX
, "pairs of address comparators: %i",
1534 (int) (etm
->config
>> 0) & 0x0f);
1535 command_print(CMD_CTX
, "data comparators: %i",
1536 (int) (etm
->config
>> 4) & 0x0f);
1537 command_print(CMD_CTX
, "memory map decoders: %i",
1538 (int) (etm
->config
>> 8) & 0x1f);
1539 command_print(CMD_CTX
, "number of counters: %i",
1540 (int) (etm
->config
>> 13) & 0x07);
1541 command_print(CMD_CTX
, "sequencer %spresent",
1542 (int) (etm
->config
& (1 << 16)) ? "" : "not ");
1543 command_print(CMD_CTX
, "number of ext. inputs: %i",
1544 (int) (etm
->config
>> 17) & 0x07);
1545 command_print(CMD_CTX
, "number of ext. outputs: %i",
1546 (int) (etm
->config
>> 20) & 0x07);
1547 command_print(CMD_CTX
, "FIFO full %spresent",
1548 (int) (etm
->config
& (1 << 23)) ? "" : "not ");
1549 if (etm
->bcd_vers
< 0x20)
1550 command_print(CMD_CTX
, "protocol version: %i",
1551 (int) (etm
->config
>> 28) & 0x07);
1553 command_print(CMD_CTX
,
1554 "coprocessor and memory access %ssupported",
1555 (etm
->config
& (1 << 26)) ? "" : "not ");
1556 command_print(CMD_CTX
, "trace start/stop %spresent",
1557 (etm
->config
& (1 << 26)) ? "" : "not ");
1558 command_print(CMD_CTX
, "number of context comparators: %i",
1559 (int) (etm
->config
>> 24) & 0x03);
1562 /* SYS_CONFIG isn't present before ETMv1.2 */
1563 etm_sys_config_reg
= etm_reg_lookup(etm
, ETM_SYS_CONFIG
);
1564 if (!etm_sys_config_reg
)
1567 etm_get_reg(etm_sys_config_reg
);
1568 config
= buf_get_u32(etm_sys_config_reg
->value
, 0, 32);
1570 LOG_DEBUG("ETM SYS CONFIG %08x", (unsigned) config
);
1572 max_port_size
= config
& 0x7;
1573 if (etm
->bcd_vers
>= 0x30)
1574 max_port_size
|= (config
>> 6) & 0x08;
1575 switch (max_port_size
)
1577 /* before ETMv3.0 */
1587 /* ETMv3.0 and later*/
1607 LOG_ERROR("Illegal max_port_size");
1610 command_print(CMD_CTX
, "max. port size: %i", max_port_size
);
1612 if (etm
->bcd_vers
< 0x30) {
1613 command_print(CMD_CTX
, "half-rate clocking %ssupported",
1614 (config
& (1 << 3)) ? "" : "not ");
1615 command_print(CMD_CTX
, "full-rate clocking %ssupported",
1616 (config
& (1 << 4)) ? "" : "not ");
1617 command_print(CMD_CTX
, "normal trace format %ssupported",
1618 (config
& (1 << 5)) ? "" : "not ");
1619 command_print(CMD_CTX
, "multiplex trace format %ssupported",
1620 (config
& (1 << 6)) ? "" : "not ");
1621 command_print(CMD_CTX
, "demultiplex trace format %ssupported",
1622 (config
& (1 << 7)) ? "" : "not ");
1624 /* REVISIT show which size and format are selected ... */
1625 command_print(CMD_CTX
, "current port size %ssupported",
1626 (config
& (1 << 10)) ? "" : "not ");
1627 command_print(CMD_CTX
, "current trace format %ssupported",
1628 (config
& (1 << 11)) ? "" : "not ");
1630 if (etm
->bcd_vers
>= 0x21)
1631 command_print(CMD_CTX
, "fetch comparisons %ssupported",
1632 (config
& (1 << 17)) ? "not " : "");
1633 command_print(CMD_CTX
, "FIFO full %ssupported",
1634 (config
& (1 << 8)) ? "" : "not ");
1639 COMMAND_HANDLER(handle_etm_status_command
)
1641 struct target
*target
;
1643 struct etm_context
*etm
;
1644 trace_status_t trace_status
;
1646 target
= get_current_target(CMD_CTX
);
1647 arm
= target_to_arm(target
);
1650 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1657 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1662 if (etm
->bcd_vers
>= 0x11) {
1665 reg
= etm_reg_lookup(etm
, ETM_STATUS
);
1668 if (etm_get_reg(reg
) == ERROR_OK
) {
1669 unsigned s
= buf_get_u32(reg
->value
, 0, reg
->size
);
1671 command_print(CMD_CTX
, "etm: %s%s%s%s",
1672 /* bit(1) == progbit */
1673 (etm
->bcd_vers
>= 0x12)
1675 ? "disabled" : "enabled")
1677 ((s
& (1 << 3)) && etm
->bcd_vers
>= 0x31)
1678 ? " triggered" : "",
1679 ((s
& (1 << 2)) && etm
->bcd_vers
>= 0x12)
1680 ? " start/stop" : "",
1681 ((s
& (1 << 0)) && etm
->bcd_vers
>= 0x11)
1682 ? " untraced-overflow" : "");
1683 } /* else ignore and try showing trace port status */
1686 /* Trace Port Driver status */
1687 trace_status
= etm
->capture_driver
->status(etm
);
1688 if (trace_status
== TRACE_IDLE
)
1690 command_print(CMD_CTX
, "%s: idle", etm
->capture_driver
->name
);
1694 static char *completed
= " completed";
1695 static char *running
= " is running";
1696 static char *overflowed
= ", overflowed";
1697 static char *triggered
= ", triggered";
1699 command_print(CMD_CTX
, "%s: trace collection%s%s%s",
1700 etm
->capture_driver
->name
,
1701 (trace_status
& TRACE_RUNNING
) ? running
: completed
,
1702 (trace_status
& TRACE_OVERFLOWED
) ? overflowed
: "",
1703 (trace_status
& TRACE_TRIGGERED
) ? triggered
: "");
1705 if (etm
->trace_depth
> 0)
1707 command_print(CMD_CTX
, "%i frames of trace data read",
1708 (int)(etm
->trace_depth
));
1715 COMMAND_HANDLER(handle_etm_image_command
)
1717 struct target
*target
;
1719 struct etm_context
*etm_ctx
;
1723 command_print(CMD_CTX
, "usage: etm image <file> [base address] [type]");
1727 target
= get_current_target(CMD_CTX
);
1728 arm
= target_to_arm(target
);
1731 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1738 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1744 image_close(etm_ctx
->image
);
1745 free(etm_ctx
->image
);
1746 command_print(CMD_CTX
, "previously loaded image found and closed");
1749 etm_ctx
->image
= malloc(sizeof(struct image
));
1750 etm_ctx
->image
->base_address_set
= 0;
1751 etm_ctx
->image
->start_address_set
= 0;
1753 /* a base address isn't always necessary, default to 0x0 (i.e. don't relocate) */
1756 etm_ctx
->image
->base_address_set
= 1;
1757 COMMAND_PARSE_NUMBER(int, CMD_ARGV
[1], etm_ctx
->image
->base_address
);
1761 etm_ctx
->image
->base_address_set
= 0;
1764 if (image_open(etm_ctx
->image
, CMD_ARGV
[0], (CMD_ARGC
>= 3) ? CMD_ARGV
[2] : NULL
) != ERROR_OK
)
1766 free(etm_ctx
->image
);
1767 etm_ctx
->image
= NULL
;
1774 COMMAND_HANDLER(handle_etm_dump_command
)
1777 struct target
*target
;
1779 struct etm_context
*etm_ctx
;
1784 command_print(CMD_CTX
, "usage: etm dump <file>");
1788 target
= get_current_target(CMD_CTX
);
1789 arm
= target_to_arm(target
);
1792 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1799 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1803 if (etm_ctx
->capture_driver
->status
== TRACE_IDLE
)
1805 command_print(CMD_CTX
, "trace capture wasn't enabled, no trace data captured");
1809 if (etm_ctx
->capture_driver
->status(etm_ctx
) & TRACE_RUNNING
)
1811 /* TODO: if on-the-fly capture is to be supported, this needs to be changed */
1812 command_print(CMD_CTX
, "trace capture not completed");
1816 /* read the trace data if it wasn't read already */
1817 if (etm_ctx
->trace_depth
== 0)
1818 etm_ctx
->capture_driver
->read_trace(etm_ctx
);
1820 if (fileio_open(&file
, CMD_ARGV
[0], FILEIO_WRITE
, FILEIO_BINARY
) != ERROR_OK
)
1825 fileio_write_u32(&file
, etm_ctx
->capture_status
);
1826 fileio_write_u32(&file
, etm_ctx
->portmode
);
1827 fileio_write_u32(&file
, etm_ctx
->tracemode
);
1828 fileio_write_u32(&file
, etm_ctx
->trace_depth
);
1830 for (i
= 0; i
< etm_ctx
->trace_depth
; i
++)
1832 fileio_write_u32(&file
, etm_ctx
->trace_data
[i
].pipestat
);
1833 fileio_write_u32(&file
, etm_ctx
->trace_data
[i
].packet
);
1834 fileio_write_u32(&file
, etm_ctx
->trace_data
[i
].flags
);
1837 fileio_close(&file
);
1842 COMMAND_HANDLER(handle_etm_load_command
)
1845 struct target
*target
;
1847 struct etm_context
*etm_ctx
;
1852 command_print(CMD_CTX
, "usage: etm load <file>");
1856 target
= get_current_target(CMD_CTX
);
1857 arm
= target_to_arm(target
);
1860 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1867 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1871 if (etm_ctx
->capture_driver
->status(etm_ctx
) & TRACE_RUNNING
)
1873 command_print(CMD_CTX
, "trace capture running, stop first");
1877 if (fileio_open(&file
, CMD_ARGV
[0], FILEIO_READ
, FILEIO_BINARY
) != ERROR_OK
)
1884 command_print(CMD_CTX
, "size isn't a multiple of 4, no valid trace data");
1885 fileio_close(&file
);
1889 if (etm_ctx
->trace_depth
> 0)
1891 free(etm_ctx
->trace_data
);
1892 etm_ctx
->trace_data
= NULL
;
1897 fileio_read_u32(&file
, &tmp
); etm_ctx
->capture_status
= tmp
;
1898 fileio_read_u32(&file
, &tmp
); etm_ctx
->portmode
= tmp
;
1899 fileio_read_u32(&file
, &tmp
); etm_ctx
->tracemode
= tmp
;
1900 fileio_read_u32(&file
, &etm_ctx
->trace_depth
);
1902 etm_ctx
->trace_data
= malloc(sizeof(struct etmv1_trace_data
) * etm_ctx
->trace_depth
);
1903 if (etm_ctx
->trace_data
== NULL
)
1905 command_print(CMD_CTX
, "not enough memory to perform operation");
1906 fileio_close(&file
);
1910 for (i
= 0; i
< etm_ctx
->trace_depth
; i
++)
1912 uint32_t pipestat
, packet
, flags
;
1913 fileio_read_u32(&file
, &pipestat
);
1914 fileio_read_u32(&file
, &packet
);
1915 fileio_read_u32(&file
, &flags
);
1916 etm_ctx
->trace_data
[i
].pipestat
= pipestat
& 0xff;
1917 etm_ctx
->trace_data
[i
].packet
= packet
& 0xffff;
1918 etm_ctx
->trace_data
[i
].flags
= flags
;
1921 fileio_close(&file
);
1926 COMMAND_HANDLER(handle_etm_trigger_percent_command
)
1928 struct target
*target
;
1930 struct etm_context
*etm_ctx
;
1932 target
= get_current_target(CMD_CTX
);
1933 arm
= target_to_arm(target
);
1936 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1943 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1950 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], new_value
);
1952 if ((new_value
< 2) || (new_value
> 100))
1954 command_print(CMD_CTX
, "valid settings are 2%% to 100%%");
1958 etm_ctx
->trigger_percent
= new_value
;
1962 command_print(CMD_CTX
, "%i percent of the tracebuffer reserved for after the trigger", ((int)(etm_ctx
->trigger_percent
)));
1967 COMMAND_HANDLER(handle_etm_start_command
)
1969 struct target
*target
;
1971 struct etm_context
*etm_ctx
;
1972 struct reg
*etm_ctrl_reg
;
1974 target
= get_current_target(CMD_CTX
);
1975 arm
= target_to_arm(target
);
1978 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1985 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1989 /* invalidate old tracing data */
1990 etm_ctx
->capture_status
= TRACE_IDLE
;
1991 if (etm_ctx
->trace_depth
> 0)
1993 free(etm_ctx
->trace_data
);
1994 etm_ctx
->trace_data
= NULL
;
1996 etm_ctx
->trace_depth
= 0;
1998 etm_ctrl_reg
= etm_reg_lookup(etm_ctx
, ETM_CTRL
);
2002 etm_get_reg(etm_ctrl_reg
);
2004 /* Clear programming bit (10), set port selection bit (11) */
2005 buf_set_u32(etm_ctrl_reg
->value
, 10, 2, 0x2);
2007 etm_store_reg(etm_ctrl_reg
);
2008 jtag_execute_queue();
2010 etm_ctx
->capture_driver
->start_capture(etm_ctx
);
2015 COMMAND_HANDLER(handle_etm_stop_command
)
2017 struct target
*target
;
2019 struct etm_context
*etm_ctx
;
2020 struct reg
*etm_ctrl_reg
;
2022 target
= get_current_target(CMD_CTX
);
2023 arm
= target_to_arm(target
);
2026 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
2033 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
2037 etm_ctrl_reg
= etm_reg_lookup(etm_ctx
, ETM_CTRL
);
2041 etm_get_reg(etm_ctrl_reg
);
2043 /* Set programming bit (10), clear port selection bit (11) */
2044 buf_set_u32(etm_ctrl_reg
->value
, 10, 2, 0x1);
2046 etm_store_reg(etm_ctrl_reg
);
2047 jtag_execute_queue();
2049 etm_ctx
->capture_driver
->stop_capture(etm_ctx
);
2054 COMMAND_HANDLER(handle_etm_analyze_command
)
2056 struct target
*target
;
2058 struct etm_context
*etm_ctx
;
2061 target
= get_current_target(CMD_CTX
);
2062 arm
= target_to_arm(target
);
2065 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
2072 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
2076 if ((retval
= etmv1_analyze_trace(etm_ctx
, CMD_CTX
)) != ERROR_OK
)
2080 case ERROR_ETM_ANALYSIS_FAILED
:
2081 command_print(CMD_CTX
, "further analysis failed (corrupted trace data or just end of data");
2083 case ERROR_TRACE_INSTRUCTION_UNAVAILABLE
:
2084 command_print(CMD_CTX
, "no instruction for current address available, analysis aborted");
2086 case ERROR_TRACE_IMAGE_UNAVAILABLE
:
2087 command_print(CMD_CTX
, "no image available for trace analysis");
2090 command_print(CMD_CTX
, "unknown error: %i", retval
);
2097 static const struct command_registration etm_config_command_handlers
[] = {
2100 .handler
= &handle_etm_config_command
,
2101 .mode
= COMMAND_CONFIG
,
2102 .usage
= "<target> <port_width> <port_mode> "
2103 "<clocking> <capture_driver>",
2105 COMMAND_REGISTRATION_DONE
2107 const struct command_registration etm_command_handlers
[] = {
2110 .mode
= COMMAND_ANY
,
2111 .help
= "Emebdded Trace Macrocell command group",
2112 .chain
= etm_config_command_handlers
,
2114 COMMAND_REGISTRATION_DONE
2117 static const struct command_registration etm_exec_command_handlers
[] = {
2119 .name
= "tracemode", handle_etm_tracemode_command
,
2120 .mode
= COMMAND_EXEC
,
2121 .help
= "configure/display trace mode",
2122 .usage
= "<none | data | address | all> "
2123 "<context_id_bits> <cycle_accurate> <branch_output>",
2127 .handler
= &handle_etm_info_command
,
2128 .mode
= COMMAND_EXEC
,
2129 .help
= "display info about the current target's ETM",
2132 .name
= "trigger_percent",
2133 .handler
= &handle_etm_trigger_percent_command
,
2134 .mode
= COMMAND_EXEC
,
2135 .help
= "amount (<percent>) of trace buffer "
2136 "to be filled after the trigger occured",
2140 .handler
= &handle_etm_status_command
,
2141 .mode
= COMMAND_EXEC
,
2142 .help
= "display current target's ETM status",
2146 .handler
= &handle_etm_start_command
,
2147 .mode
= COMMAND_EXEC
,
2148 .help
= "start ETM trace collection",
2152 .handler
= &handle_etm_stop_command
,
2153 .mode
= COMMAND_EXEC
,
2154 .help
= "stop ETM trace collection",
2158 .handler
= &handle_etm_analyze_command
,
2159 .mode
= COMMAND_EXEC
,
2160 .help
= "anaylze collected ETM trace",
2164 .handler
= &handle_etm_image_command
,
2165 .mode
= COMMAND_EXEC
,
2166 .help
= "load image from <file> [base address]",
2170 .handler
= &handle_etm_dump_command
,
2171 .mode
= COMMAND_EXEC
,
2172 .help
= "dump captured trace data <file>",
2176 .handler
= &handle_etm_load_command
,
2177 .mode
= COMMAND_EXEC
,
2178 .help
= "load trace data for analysis <file>",
2180 COMMAND_REGISTRATION_DONE
2183 static int etm_register_user_commands(struct command_context
*cmd_ctx
)
2185 struct command
*etm_cmd
= command_find_in_context(cmd_ctx
, "etm");
2186 return register_commands(cmd_ctx
, etm_cmd
, etm_exec_command_handlers
);
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)