Code Review / openocd.git / blob
? search:
summary | shortlog | log | commit | commitdiff | review | tree
history | raw | HEAD
remove register_commands from etm_capture_driver
[openocd.git] / src / target / etm.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
9 * *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
14 * *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
19 ***************************************************************************/
20 #ifdef HAVE_CONFIG_H
21 #include "config.h"
22 #endif
23
24 #include "armv4_5.h"
25 #include "etm.h"
26 #include "etb.h"
27 #include "image.h"
28 #include "arm_disassembler.h"
29 #include "register.h"
30
31
32 /*
33 * ARM "Embedded Trace Macrocell" (ETM) support -- direct JTAG access.
34 *
35 * ETM modules collect instruction and/or data trace information, compress
36 * it, and transfer it to a debugging host through either a (buffered) trace
37 * port (often a 38-pin Mictor connector) or an Embedded Trace Buffer (ETB).
38 *
39 * There are several generations of these modules. Original versions have
40 * JTAG access through a dedicated scan chain. Recent versions have added
41 * access via coprocessor instructions, memory addressing, and the ARM Debug
42 * Interface v5 (ADIv5); and phased out direct JTAG access.
43 *
44 * This code supports up to the ETMv1.3 architecture, as seen in ETM9 and
45 * most common ARM9 systems. Note: "CoreSight ETM9" implements ETMv3.2,
46 * implying non-JTAG connectivity options.
47 *
48 * Relevant documentation includes:
49 * ARM DDI 0157G ... ETM9 (r2p2) Technical Reference Manual
50 * ARM DDI 0315B ... CoreSight ETM9 (r0p1) Technical Reference Manual
51 * ARM IHI 0014O ... Embedded Trace Macrocell, Architecture Specification
52 */
53
54 enum {
55 RO, /* read/only */
56 WO, /* write/only */
57 RW, /* read/write */
58 };
59
60 struct etm_reg_info {
61 uint8_t addr;
62 uint8_t size; /* low-N of 32 bits */
63 uint8_t mode; /* RO, WO, RW */
64 uint8_t bcd_vers; /* 1.0, 2.0, etc */
65 char *name;
66 };
67
68 /*
69 * Registers 0..0x7f are JTAG-addressable using scanchain 6.
70 * (Or on some processors, through coprocessor operations.)
71 * Newer versions of ETM make some W/O registers R/W, and
72 * provide definitions for some previously-unused bits.
73 */
74
75 /* core registers used to version/configure the ETM */
76 static const struct etm_reg_info etm_core[] = {
77 /* NOTE: we "know" the order here ... */
78 { ETM_CONFIG, 32, RO, 0x10, "ETM_config", },
79 { ETM_ID, 32, RO, 0x20, "ETM_id", },
80 };
81
82 /* basic registers that are always there given the right ETM version */
83 static const struct etm_reg_info etm_basic[] = {
84 /* ETM Trace Registers */
85 { ETM_CTRL, 32, RW, 0x10, "ETM_ctrl", },
86 { ETM_TRIG_EVENT, 17, WO, 0x10, "ETM_trig_event", },
87 { ETM_ASIC_CTRL, 8, WO, 0x10, "ETM_asic_ctrl", },
88 { ETM_STATUS, 3, RO, 0x11, "ETM_status", },
89 { ETM_SYS_CONFIG, 9, RO, 0x12, "ETM_sys_config", },
90
91 /* TraceEnable configuration */
92 { ETM_TRACE_RESOURCE_CTRL, 32, WO, 0x12, "ETM_trace_resource_ctrl", },
93 { ETM_TRACE_EN_CTRL2, 16, WO, 0x12, "ETM_trace_en_ctrl2", },
94 { ETM_TRACE_EN_EVENT, 17, WO, 0x10, "ETM_trace_en_event", },
95 { ETM_TRACE_EN_CTRL1, 26, WO, 0x10, "ETM_trace_en_ctrl1", },
96
97 /* ViewData configuration (data trace) */
98 { ETM_VIEWDATA_EVENT, 17, WO, 0x10, "ETM_viewdata_event", },
99 { ETM_VIEWDATA_CTRL1, 32, WO, 0x10, "ETM_viewdata_ctrl1", },
100 { ETM_VIEWDATA_CTRL2, 32, WO, 0x10, "ETM_viewdata_ctrl2", },
101 { ETM_VIEWDATA_CTRL3, 17, WO, 0x10, "ETM_viewdata_ctrl3", },
102
103 /* REVISIT exclude VIEWDATA_CTRL2 when it's not there */
104
105 { 0x78, 12, WO, 0x20, "ETM_sync_freq", },
106 { 0x7a, 22, RO, 0x31, "ETM_config_code_ext", },
107 { 0x7b, 32, WO, 0x31, "ETM_ext_input_select", },
108 { 0x7c, 32, WO, 0x34, "ETM_trace_start_stop", },
109 { 0x7d, 8, WO, 0x34, "ETM_behavior_control", },
110 };
111
112 static const struct etm_reg_info etm_fifofull[] = {
113 /* FIFOFULL configuration */
114 { ETM_FIFOFULL_REGION, 25, WO, 0x10, "ETM_fifofull_region", },
115 { ETM_FIFOFULL_LEVEL, 8, WO, 0x10, "ETM_fifofull_level", },
116 };
117
118 static const struct etm_reg_info etm_addr_comp[] = {
119 /* Address comparator register pairs */
120 #define ADDR_COMPARATOR(i) \
121 { ETM_ADDR_COMPARATOR_VALUE + (i) - 1, 32, WO, 0x10, \
122 "ETM_addr_" #i "_comparator_value", }, \
123 { ETM_ADDR_ACCESS_TYPE + (i) - 1, 7, WO, 0x10, \
124 "ETM_addr_" #i "_access_type", }
125 ADDR_COMPARATOR(1),
126 ADDR_COMPARATOR(2),
127 ADDR_COMPARATOR(3),
128 ADDR_COMPARATOR(4),
129 ADDR_COMPARATOR(5),
130 ADDR_COMPARATOR(6),
131 ADDR_COMPARATOR(7),
132 ADDR_COMPARATOR(8),
133
134 ADDR_COMPARATOR(9),
135 ADDR_COMPARATOR(10),
136 ADDR_COMPARATOR(11),
137 ADDR_COMPARATOR(12),
138 ADDR_COMPARATOR(13),
139 ADDR_COMPARATOR(14),
140 ADDR_COMPARATOR(15),
141 ADDR_COMPARATOR(16),
142 #undef ADDR_COMPARATOR
143 };
144
145 static const struct etm_reg_info etm_data_comp[] = {
146 /* Data Value Comparators (NOTE: odd addresses are reserved) */
147 #define DATA_COMPARATOR(i) \
148 { ETM_DATA_COMPARATOR_VALUE + 2*(i) - 1, 32, WO, 0x10, \
149 "ETM_data_" #i "_comparator_value", }, \
150 { ETM_DATA_COMPARATOR_MASK + 2*(i) - 1, 32, WO, 0x10, \
151 "ETM_data_" #i "_comparator_mask", }
152 DATA_COMPARATOR(1),
153 DATA_COMPARATOR(2),
154 DATA_COMPARATOR(3),
155 DATA_COMPARATOR(4),
156 DATA_COMPARATOR(5),
157 DATA_COMPARATOR(6),
158 DATA_COMPARATOR(7),
159 DATA_COMPARATOR(8),
160 #undef DATA_COMPARATOR
161 };
162
163 static const struct etm_reg_info etm_counters[] = {
164 #define ETM_COUNTER(i) \
165 { ETM_COUNTER_RELOAD_VALUE + (i) - 1, 16, WO, 0x10, \
166 "ETM_counter_" #i "_reload_value", }, \
167 { ETM_COUNTER_ENABLE + (i) - 1, 18, WO, 0x10, \
168 "ETM_counter_" #i "_enable", }, \
169 { ETM_COUNTER_RELOAD_EVENT + (i) - 1, 17, WO, 0x10, \
170 "ETM_counter_" #i "_reload_event", }, \
171 { ETM_COUNTER_VALUE + (i) - 1, 16, RO, 0x10, \
172 "ETM_counter_" #i "_value", }
173 ETM_COUNTER(1),
174 ETM_COUNTER(2),
175 ETM_COUNTER(3),
176 ETM_COUNTER(4),
177 #undef ETM_COUNTER
178 };
179
180 static const struct etm_reg_info etm_sequencer[] = {
181 #define ETM_SEQ(i) \
182 { ETM_SEQUENCER_EVENT + (i), 17, WO, 0x10, \
183 "ETM_sequencer_event" #i, }
184 ETM_SEQ(0), /* 1->2 */
185 ETM_SEQ(1), /* 2->1 */
186 ETM_SEQ(2), /* 2->3 */
187 ETM_SEQ(3), /* 3->1 */
188 ETM_SEQ(4), /* 3->2 */
189 ETM_SEQ(5), /* 1->3 */
190 #undef ETM_SEQ
191 /* 0x66 reserved */
192 { ETM_SEQUENCER_STATE, 2, RO, 0x10, "ETM_sequencer_state", },
193 };
194
195 static const struct etm_reg_info etm_outputs[] = {
196 #define ETM_OUTPUT(i) \
197 { ETM_EXTERNAL_OUTPUT + (i) - 1, 17, WO, 0x10, \
198 "ETM_external_output" #i, }
199
200 ETM_OUTPUT(1),
201 ETM_OUTPUT(2),
202 ETM_OUTPUT(3),
203 ETM_OUTPUT(4),
204 #undef ETM_OUTPUT
205 };
206
207 #if 0
208 /* registers from 0x6c..0x7f were added after ETMv1.3 */
209
210 /* Context ID Comparators */
211 { 0x6c, 32, RO, 0x20, "ETM_contextid_comparator_value1", }
212 { 0x6d, 32, RO, 0x20, "ETM_contextid_comparator_value2", }
213 { 0x6e, 32, RO, 0x20, "ETM_contextid_comparator_value3", }
214 { 0x6f, 32, RO, 0x20, "ETM_contextid_comparator_mask", }
215 #endif
216
217 static int etm_get_reg(struct reg *reg);
218 static int etm_read_reg_w_check(struct reg *reg,
219 uint8_t* check_value, uint8_t* check_mask);
220 static int etm_register_user_commands(struct command_context *cmd_ctx);
221 static int etm_set_reg_w_exec(struct reg *reg, uint8_t *buf);
222 static int etm_write_reg(struct reg *reg, uint32_t value);
223
224 static const struct reg_arch_type etm_scan6_type = {
225 .get = etm_get_reg,
226 .set = etm_set_reg_w_exec,
227 };
228
229 /* Look up register by ID ... most ETM instances only
230 * support a subset of the possible registers.
231 */
232 static struct reg *etm_reg_lookup(struct etm_context *etm_ctx, unsigned id)
233 {
234 struct reg_cache *cache = etm_ctx->reg_cache;
235 unsigned i;
236
237 for (i = 0; i < cache->num_regs; i++) {
238 struct etm_reg *reg = cache->reg_list[i].arch_info;
239
240 if (reg->reg_info->addr == id)
241 return &cache->reg_list[i];
242 }
243
244 /* caller asking for nonexistent register is a bug! */
245 /* REVISIT say which of the N targets was involved */
246 LOG_ERROR("ETM: register 0x%02x not available", id);
247 return NULL;
248 }
249
250 static void etm_reg_add(unsigned bcd_vers, struct arm_jtag *jtag_info,
251 struct reg_cache *cache, struct etm_reg *ereg,
252 const struct etm_reg_info *r, unsigned nreg)
253 {
254 struct reg *reg = cache->reg_list;
255
256 reg += cache->num_regs;
257 ereg += cache->num_regs;
258
259 /* add up to "nreg" registers from "r", if supported by this
260 * version of the ETM, to the specified cache.
261 */
262 for (; nreg--; r++) {
263
264 /* this ETM may be too old to have some registers */
265 if (r->bcd_vers > bcd_vers)
266 continue;
267
268 reg->name = r->name;
269 reg->size = r->size;
270 reg->value = &ereg->value;
271 reg->arch_info = ereg;
272 reg->type = &etm_scan6_type;
273 reg++;
274 cache->num_regs++;
275
276 ereg->reg_info = r;
277 ereg->jtag_info = jtag_info;
278 ereg++;
279 }
280 }
281
282 struct reg_cache *etm_build_reg_cache(struct target *target,
283 struct arm_jtag *jtag_info, struct etm_context *etm_ctx)
284 {
285 struct reg_cache *reg_cache = malloc(sizeof(struct reg_cache));
286 struct reg *reg_list = NULL;
287 struct etm_reg *arch_info = NULL;
288 unsigned bcd_vers, config;
289
290 /* the actual registers are kept in two arrays */
291 reg_list = calloc(128, sizeof(struct reg));
292 arch_info = calloc(128, sizeof(struct etm_reg));
293
294 /* fill in values for the reg cache */
295 reg_cache->name = "etm registers";
296 reg_cache->next = NULL;
297 reg_cache->reg_list = reg_list;
298 reg_cache->num_regs = 0;
299
300 /* add ETM_CONFIG, then parse its values to see
301 * which other registers exist in this ETM
302 */
303 etm_reg_add(0x10, jtag_info, reg_cache, arch_info,
304 etm_core, 1);
305
306 etm_get_reg(reg_list);
307 etm_ctx->config = buf_get_u32((void *)&arch_info->value, 0, 32);
308 config = etm_ctx->config;
309
310 /* figure ETM version then add base registers */
311 if (config & (1 << 31)) {
312 bcd_vers = 0x20;
313 LOG_WARNING("ETMv2+ support is incomplete");
314
315 /* REVISIT more registers may exist; they may now be
316 * readable; more register bits have defined meanings;
317 * don't presume trace start/stop support is present;
318 * and include any context ID comparator registers.
319 */
320 etm_reg_add(0x20, jtag_info, reg_cache, arch_info,
321 etm_core + 1, 1);
322 etm_get_reg(reg_list + 1);
323 etm_ctx->id = buf_get_u32(
324 (void *)&arch_info[1].value, 0, 32);
325 LOG_DEBUG("ETM ID: %08x", (unsigned) etm_ctx->id);
326 bcd_vers = 0x10 + (((etm_ctx->id) >> 4) & 0xff);
327
328 } else {
329 switch (config >> 28) {
330 case 7:
331 case 5:
332 case 3:
333 bcd_vers = 0x13;
334 break;
335 case 4:
336 case 2:
337 bcd_vers = 0x12;
338 break;
339 case 1:
340 bcd_vers = 0x11;
341 break;
342 case 0:
343 bcd_vers = 0x10;
344 break;
345 default:
346 LOG_WARNING("Bad ETMv1 protocol %d", config >> 28);
347 goto fail;
348 }
349 }
350 etm_ctx->bcd_vers = bcd_vers;
351 LOG_INFO("ETM v%d.%d", bcd_vers >> 4, bcd_vers & 0xf);
352
353 etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
354 etm_basic, ARRAY_SIZE(etm_basic));
355
356 /* address and data comparators; counters; outputs */
357 etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
358 etm_addr_comp, 4 * (0x0f & (config >> 0)));
359 etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
360 etm_data_comp, 2 * (0x0f & (config >> 4)));
361 etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
362 etm_counters, 4 * (0x07 & (config >> 13)));
363 etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
364 etm_outputs, (0x07 & (config >> 20)));
365
366 /* FIFOFULL presence is optional
367 * REVISIT for ETMv1.2 and later, don't bother adding this
368 * unless ETM_SYS_CONFIG says it's also *supported* ...
369 */
370 if (config & (1 << 23))
371 etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
372 etm_fifofull, ARRAY_SIZE(etm_fifofull));
373
374 /* sequencer is optional (for state-dependant triggering) */
375 if (config & (1 << 16))
376 etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
377 etm_sequencer, ARRAY_SIZE(etm_sequencer));
378
379 /* REVISIT could realloc and likely save half the memory
380 * in the two chunks we allocated...
381 */
382
383 /* the ETM might have an ETB connected */
384 if (strcmp(etm_ctx->capture_driver->name, "etb") == 0)
385 {
386 struct etb *etb = etm_ctx->capture_driver_priv;
387
388 if (!etb)
389 {
390 LOG_ERROR("etb selected as etm capture driver, but no ETB configured");
391 goto fail;
392 }
393
394 reg_cache->next = etb_build_reg_cache(etb);
395
396 etb->reg_cache = reg_cache->next;
397 }
398
399 etm_ctx->reg_cache = reg_cache;
400 return reg_cache;
401
402 fail:
403 free(reg_cache);
404 free(reg_list);
405 free(arch_info);
406 return NULL;
407 }
408
409 static int etm_read_reg(struct reg *reg)
410 {
411 return etm_read_reg_w_check(reg, NULL, NULL);
412 }
413
414 static int etm_store_reg(struct reg *reg)
415 {
416 return etm_write_reg(reg, buf_get_u32(reg->value, 0, reg->size));
417 }
418
419 int etm_setup(struct target *target)
420 {
421 int retval;
422 uint32_t etm_ctrl_value;
423 struct arm *arm = target_to_arm(target);
424 struct etm_context *etm_ctx = arm->etm;
425 struct reg *etm_ctrl_reg;
426
427 etm_ctrl_reg = etm_reg_lookup(etm_ctx, ETM_CTRL);
428 if (!etm_ctrl_reg)
429 return ERROR_OK;
430
431 /* initialize some ETM control register settings */
432 etm_get_reg(etm_ctrl_reg);
433 etm_ctrl_value = buf_get_u32(etm_ctrl_reg->value, 0, etm_ctrl_reg->size);
434
435 /* clear the ETM powerdown bit (0) */
436 etm_ctrl_value &= ~0x1;
437
438 /* configure port width (21,6:4), mode (13,17:16) and
439 * for older modules clocking (13)
440 */
441 etm_ctrl_value = (etm_ctrl_value
442 & ~ETM_PORT_WIDTH_MASK
443 & ~ETM_PORT_MODE_MASK
444 & ~ETM_PORT_CLOCK_MASK)
445 | etm_ctx->portmode;
446
447 buf_set_u32(etm_ctrl_reg->value, 0, etm_ctrl_reg->size, etm_ctrl_value);
448 etm_store_reg(etm_ctrl_reg);
449
450 if ((retval = jtag_execute_queue()) != ERROR_OK)
451 return retval;
452
453 /* REVISIT for ETMv3.0 and later, read ETM_sys_config to
454 * verify that those width and mode settings are OK ...
455 */
456
457 if ((retval = etm_ctx->capture_driver->init(etm_ctx)) != ERROR_OK)
458 {
459 LOG_ERROR("ETM capture driver initialization failed");
460 return retval;
461 }
462 return ERROR_OK;
463 }
464
465 static int etm_get_reg(struct reg *reg)
466 {
467 int retval;
468
469 if ((retval = etm_read_reg(reg)) != ERROR_OK)
470 {
471 LOG_ERROR("BUG: error scheduling etm register read");
472 return retval;
473 }
474
475 if ((retval = jtag_execute_queue()) != ERROR_OK)
476 {
477 LOG_ERROR("register read failed");
478 return retval;
479 }
480
481 return ERROR_OK;
482 }
483
484 static int etm_read_reg_w_check(struct reg *reg,
485 uint8_t* check_value, uint8_t* check_mask)
486 {
487 struct etm_reg *etm_reg = reg->arch_info;
488 const struct etm_reg_info *r = etm_reg->reg_info;
489 uint8_t reg_addr = r->addr & 0x7f;
490 struct scan_field fields[3];
491
492 if (etm_reg->reg_info->mode == WO) {
493 LOG_ERROR("BUG: can't read write-only register %s", r->name);
494 return ERROR_INVALID_ARGUMENTS;
495 }
496
497 LOG_DEBUG("%s (%u)", r->name, reg_addr);
498
499 jtag_set_end_state(TAP_IDLE);
500 arm_jtag_scann(etm_reg->jtag_info, 0x6);
501 arm_jtag_set_instr(etm_reg->jtag_info, etm_reg->jtag_info->intest_instr, NULL);
502
503 fields[0].tap = etm_reg->jtag_info->tap;
504 fields[0].num_bits = 32;
505 fields[0].out_value = reg->value;
506 fields[0].in_value = NULL;
507 fields[0].check_value = NULL;
508 fields[0].check_mask = NULL;
509
510 fields[1].tap = etm_reg->jtag_info->tap;
511 fields[1].num_bits = 7;
512 fields[1].out_value = malloc(1);
513 buf_set_u32(fields[1].out_value, 0, 7, reg_addr);
514 fields[1].in_value = NULL;
515 fields[1].check_value = NULL;
516 fields[1].check_mask = NULL;
517
518 fields[2].tap = etm_reg->jtag_info->tap;
519 fields[2].num_bits = 1;
520 fields[2].out_value = malloc(1);
521 buf_set_u32(fields[2].out_value, 0, 1, 0);
522 fields[2].in_value = NULL;
523 fields[2].check_value = NULL;
524 fields[2].check_mask = NULL;
525
526 jtag_add_dr_scan(3, fields, jtag_get_end_state());
527
528 fields[0].in_value = reg->value;
529 fields[0].check_value = check_value;
530 fields[0].check_mask = check_mask;
531
532 jtag_add_dr_scan_check(3, fields, jtag_get_end_state());
533
534 free(fields[1].out_value);
535 free(fields[2].out_value);
536
537 return ERROR_OK;
538 }
539
540 static int etm_set_reg(struct reg *reg, uint32_t value)
541 {
542 int retval;
543
544 if ((retval = etm_write_reg(reg, value)) != ERROR_OK)
545 {
546 LOG_ERROR("BUG: error scheduling etm register write");
547 return retval;
548 }
549
550 buf_set_u32(reg->value, 0, reg->size, value);
551 reg->valid = 1;
552 reg->dirty = 0;
553
554 return ERROR_OK;
555 }
556
557 static int etm_set_reg_w_exec(struct reg *reg, uint8_t *buf)
558 {
559 int retval;
560
561 etm_set_reg(reg, buf_get_u32(buf, 0, reg->size));
562
563 if ((retval = jtag_execute_queue()) != ERROR_OK)
564 {
565 LOG_ERROR("register write failed");
566 return retval;
567 }
568 return ERROR_OK;
569 }
570
571 static int etm_write_reg(struct reg *reg, uint32_t value)
572 {
573 struct etm_reg *etm_reg = reg->arch_info;
574 const struct etm_reg_info *r = etm_reg->reg_info;
575 uint8_t reg_addr = r->addr & 0x7f;
576 struct scan_field fields[3];
577
578 if (etm_reg->reg_info->mode == RO) {
579 LOG_ERROR("BUG: can't write read--only register %s", r->name);
580 return ERROR_INVALID_ARGUMENTS;
581 }
582
583 LOG_DEBUG("%s (%u): 0x%8.8" PRIx32 "", r->name, reg_addr, value);
584
585 jtag_set_end_state(TAP_IDLE);
586 arm_jtag_scann(etm_reg->jtag_info, 0x6);
587 arm_jtag_set_instr(etm_reg->jtag_info, etm_reg->jtag_info->intest_instr, NULL);
588
589 fields[0].tap = etm_reg->jtag_info->tap;
590 fields[0].num_bits = 32;
591 uint8_t tmp1[4];
592 fields[0].out_value = tmp1;
593 buf_set_u32(fields[0].out_value, 0, 32, value);
594 fields[0].in_value = NULL;
595
596 fields[1].tap = etm_reg->jtag_info->tap;
597 fields[1].num_bits = 7;
598 uint8_t tmp2;
599 fields[1].out_value = &tmp2;
600 buf_set_u32(fields[1].out_value, 0, 7, reg_addr);
601 fields[1].in_value = NULL;
602
603 fields[2].tap = etm_reg->jtag_info->tap;
604 fields[2].num_bits = 1;
605 uint8_t tmp3;
606 fields[2].out_value = &tmp3;
607 buf_set_u32(fields[2].out_value, 0, 1, 1);
608 fields[2].in_value = NULL;
609
610 jtag_add_dr_scan(3, fields, jtag_get_end_state());
611
612 return ERROR_OK;
613 }
614
615
616 /* ETM trace analysis functionality
617 *
618 */
619 extern struct etm_capture_driver etm_dummy_capture_driver;
620 #if BUILD_OOCD_TRACE == 1
621 extern struct etm_capture_driver oocd_trace_capture_driver;
622 #endif
623
624 static struct etm_capture_driver *etm_capture_drivers[] =
625 {
626 &etb_capture_driver,
627 &etm_dummy_capture_driver,
628 #if BUILD_OOCD_TRACE == 1
629 &oocd_trace_capture_driver,
630 #endif
631 NULL
632 };
633
634 static int etm_read_instruction(struct etm_context *ctx, struct arm_instruction *instruction)
635 {
636 int i;
637 int section = -1;
638 size_t size_read;
639 uint32_t opcode;
640 int retval;
641
642 if (!ctx->image)
643 return ERROR_TRACE_IMAGE_UNAVAILABLE;
644
645 /* search for the section the current instruction belongs to */
646 for (i = 0; i < ctx->image->num_sections; i++)
647 {
648 if ((ctx->image->sections[i].base_address <= ctx->current_pc) &&
649 (ctx->image->sections[i].base_address + ctx->image->sections[i].size > ctx->current_pc))
650 {
651 section = i;
652 break;
653 }
654 }
655
656 if (section == -1)
657 {
658 /* current instruction couldn't be found in the image */
659 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
660 }
661
662 if (ctx->core_state == ARMV4_5_STATE_ARM)
663 {
664 uint8_t buf[4];
665 if ((retval = image_read_section(ctx->image, section,
666 ctx->current_pc - ctx->image->sections[section].base_address,
667 4, buf, &size_read)) != ERROR_OK)
668 {
669 LOG_ERROR("error while reading instruction: %i", retval);
670 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
671 }
672 opcode = target_buffer_get_u32(ctx->target, buf);
673 arm_evaluate_opcode(opcode, ctx->current_pc, instruction);
674 }
675 else if (ctx->core_state == ARMV4_5_STATE_THUMB)
676 {
677 uint8_t buf[2];
678 if ((retval = image_read_section(ctx->image, section,
679 ctx->current_pc - ctx->image->sections[section].base_address,
680 2, buf, &size_read)) != ERROR_OK)
681 {
682 LOG_ERROR("error while reading instruction: %i", retval);
683 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
684 }
685 opcode = target_buffer_get_u16(ctx->target, buf);
686 thumb_evaluate_opcode(opcode, ctx->current_pc, instruction);
687 }
688 else if (ctx->core_state == ARMV4_5_STATE_JAZELLE)
689 {
690 LOG_ERROR("BUG: tracing of jazelle code not supported");
691 return ERROR_FAIL;
692 }
693 else
694 {
695 LOG_ERROR("BUG: unknown core state encountered");
696 return ERROR_FAIL;
697 }
698
699 return ERROR_OK;
700 }
701
702 static int etmv1_next_packet(struct etm_context *ctx, uint8_t *packet, int apo)
703 {
704 while (ctx->data_index < ctx->trace_depth)
705 {
706 /* if the caller specified an address packet offset, skip until the
707 * we reach the n-th cycle marked with tracesync */
708 if (apo > 0)
709 {
710 if (ctx->trace_data[ctx->data_index].flags & ETMV1_TRACESYNC_CYCLE)
711 apo--;
712
713 if (apo > 0)
714 {
715 ctx->data_index++;
716 ctx->data_half = 0;
717 }
718 continue;
719 }
720
721 /* no tracedata output during a TD cycle
722 * or in a trigger cycle */
723 if ((ctx->trace_data[ctx->data_index].pipestat == STAT_TD)
724 || (ctx->trace_data[ctx->data_index].flags & ETMV1_TRIGGER_CYCLE))
725 {
726 ctx->data_index++;
727 ctx->data_half = 0;
728 continue;
729 }
730
731 if ((ctx->portmode & ETM_PORT_WIDTH_MASK) == ETM_PORT_16BIT)
732 {
733 if (ctx->data_half == 0)
734 {
735 *packet = ctx->trace_data[ctx->data_index].packet & 0xff;
736 ctx->data_half = 1;
737 }
738 else
739 {
740 *packet = (ctx->trace_data[ctx->data_index].packet & 0xff00) >> 8;
741 ctx->data_half = 0;
742 ctx->data_index++;
743 }
744 }
745 else if ((ctx->portmode & ETM_PORT_WIDTH_MASK) == ETM_PORT_8BIT)
746 {
747 *packet = ctx->trace_data[ctx->data_index].packet & 0xff;
748 ctx->data_index++;
749 }
750 else
751 {
752 /* on a 4-bit port, a packet will be output during two consecutive cycles */
753 if (ctx->data_index > (ctx->trace_depth - 2))
754 return -1;
755
756 *packet = ctx->trace_data[ctx->data_index].packet & 0xf;
757 *packet |= (ctx->trace_data[ctx->data_index + 1].packet & 0xf) << 4;
758 ctx->data_index += 2;
759 }
760
761 return 0;
762 }
763
764 return -1;
765 }
766
767 static int etmv1_branch_address(struct etm_context *ctx)
768 {
769 int retval;
770 uint8_t packet;
771 int shift = 0;
772 int apo;
773 uint32_t i;
774
775 /* quit analysis if less than two cycles are left in the trace
776 * because we can't extract the APO */
777 if (ctx->data_index > (ctx->trace_depth - 2))
778 return -1;
779
780 /* a BE could be output during an APO cycle, skip the current
781 * and continue with the new one */
782 if (ctx->trace_data[ctx->pipe_index + 1].pipestat & 0x4)
783 return 1;
784 if (ctx->trace_data[ctx->pipe_index + 2].pipestat & 0x4)
785 return 2;
786
787 /* address packet offset encoded in the next two cycles' pipestat bits */
788 apo = ctx->trace_data[ctx->pipe_index + 1].pipestat & 0x3;
789 apo |= (ctx->trace_data[ctx->pipe_index + 2].pipestat & 0x3) << 2;
790
791 /* count number of tracesync cycles between current pipe_index and data_index
792 * i.e. the number of tracesyncs that data_index already passed by
793 * to subtract them from the APO */
794 for (i = ctx->pipe_index; i < ctx->data_index; i++)
795 {
796 if (ctx->trace_data[ctx->pipe_index + 1].pipestat & ETMV1_TRACESYNC_CYCLE)
797 apo--;
798 }
799
800 /* extract up to four 7-bit packets */
801 do {
802 if ((retval = etmv1_next_packet(ctx, &packet, (shift == 0) ? apo + 1 : 0)) != 0)
803 return -1;
804 ctx->last_branch &= ~(0x7f << shift);
805 ctx->last_branch |= (packet & 0x7f) << shift;
806 shift += 7;
807 } while ((packet & 0x80) && (shift < 28));
808
809 /* one last packet holding 4 bits of the address, plus the branch reason code */
810 if ((shift == 28) && (packet & 0x80))
811 {
812 if ((retval = etmv1_next_packet(ctx, &packet, 0)) != 0)
813 return -1;
814 ctx->last_branch &= 0x0fffffff;
815 ctx->last_branch |= (packet & 0x0f) << 28;
816 ctx->last_branch_reason = (packet & 0x70) >> 4;
817 shift += 4;
818 }
819 else
820 {
821 ctx->last_branch_reason = 0;
822 }
823
824 if (shift == 32)
825 {
826 ctx->pc_ok = 1;
827 }
828
829 /* if a full address was output, we might have branched into Jazelle state */
830 if ((shift == 32) && (packet & 0x80))
831 {
832 ctx->core_state = ARMV4_5_STATE_JAZELLE;
833 }
834 else
835 {
836 /* if we didn't branch into Jazelle state, the current processor state is
837 * encoded in bit 0 of the branch target address */
838 if (ctx->last_branch & 0x1)
839 {
840 ctx->core_state = ARMV4_5_STATE_THUMB;
841 ctx->last_branch &= ~0x1;
842 }
843 else
844 {
845 ctx->core_state = ARMV4_5_STATE_ARM;
846 ctx->last_branch &= ~0x3;
847 }
848 }
849
850 return 0;
851 }
852
853 static int etmv1_data(struct etm_context *ctx, int size, uint32_t *data)
854 {
855 int j;
856 uint8_t buf[4];
857 int retval;
858
859 for (j = 0; j < size; j++)
860 {
861 if ((retval = etmv1_next_packet(ctx, &buf[j], 0)) != 0)
862 return -1;
863 }
864
865 if (size == 8)
866 {
867 LOG_ERROR("TODO: add support for 64-bit values");
868 return -1;
869 }
870 else if (size == 4)
871 *data = target_buffer_get_u32(ctx->target, buf);
872 else if (size == 2)
873 *data = target_buffer_get_u16(ctx->target, buf);
874 else if (size == 1)
875 *data = buf[0];
876 else
877 return -1;
878
879 return 0;
880 }
881
882 static int etmv1_analyze_trace(struct etm_context *ctx, struct command_context *cmd_ctx)
883 {
884 int retval;
885 struct arm_instruction instruction;
886
887 /* read the trace data if it wasn't read already */
888 if (ctx->trace_depth == 0)
889 ctx->capture_driver->read_trace(ctx);
890
891 /* start at the beginning of the captured trace */
892 ctx->pipe_index = 0;
893 ctx->data_index = 0;
894 ctx->data_half = 0;
895
896 /* neither the PC nor the data pointer are valid */
897 ctx->pc_ok = 0;
898 ctx->ptr_ok = 0;
899
900 while (ctx->pipe_index < ctx->trace_depth)
901 {
902 uint8_t pipestat = ctx->trace_data[ctx->pipe_index].pipestat;
903 uint32_t next_pc = ctx->current_pc;
904 uint32_t old_data_index = ctx->data_index;
905 uint32_t old_data_half = ctx->data_half;
906 uint32_t old_index = ctx->pipe_index;
907 uint32_t last_instruction = ctx->last_instruction;
908 uint32_t cycles = 0;
909 int current_pc_ok = ctx->pc_ok;
910
911 if (ctx->trace_data[ctx->pipe_index].flags & ETMV1_TRIGGER_CYCLE)
912 {
913 command_print(cmd_ctx, "--- trigger ---");
914 }
915
916 /* instructions execute in IE/D or BE/D cycles */
917 if ((pipestat == STAT_IE) || (pipestat == STAT_ID))
918 ctx->last_instruction = ctx->pipe_index;
919
920 /* if we don't have a valid pc skip until we reach an indirect branch */
921 if ((!ctx->pc_ok) && (pipestat != STAT_BE))
922 {
923 ctx->pipe_index++;
924 continue;
925 }
926
927 /* any indirect branch could have interrupted instruction flow
928 * - the branch reason code could indicate a trace discontinuity
929 * - a branch to the exception vectors indicates an exception
930 */
931 if ((pipestat == STAT_BE) || (pipestat == STAT_BD))
932 {
933 /* backup current data index, to be able to consume the branch address
934 * before examining data address and values
935 */
936 old_data_index = ctx->data_index;
937 old_data_half = ctx->data_half;
938
939 ctx->last_instruction = ctx->pipe_index;
940
941 if ((retval = etmv1_branch_address(ctx)) != 0)
942 {
943 /* negative return value from etmv1_branch_address means we ran out of packets,
944 * quit analysing the trace */
945 if (retval < 0)
946 break;
947
948 /* a positive return values means the current branch was abandoned,
949 * and a new branch was encountered in cycle ctx->pipe_index + retval;
950 */
951 LOG_WARNING("abandoned branch encountered, correctnes of analysis uncertain");
952 ctx->pipe_index += retval;
953 continue;
954 }
955
956 /* skip over APO cycles */
957 ctx->pipe_index += 2;
958
959 switch (ctx->last_branch_reason)
960 {
961 case 0x0: /* normal PC change */
962 next_pc = ctx->last_branch;
963 break;
964 case 0x1: /* tracing enabled */
965 command_print(cmd_ctx, "--- tracing enabled at 0x%8.8" PRIx32 " ---", ctx->last_branch);
966 ctx->current_pc = ctx->last_branch;
967 ctx->pipe_index++;
968 continue;
969 break;
970 case 0x2: /* trace restarted after FIFO overflow */
971 command_print(cmd_ctx, "--- trace restarted after FIFO overflow at 0x%8.8" PRIx32 " ---", ctx->last_branch);
972 ctx->current_pc = ctx->last_branch;
973 ctx->pipe_index++;
974 continue;
975 break;
976 case 0x3: /* exit from debug state */
977 command_print(cmd_ctx, "--- exit from debug state at 0x%8.8" PRIx32 " ---", ctx->last_branch);
978 ctx->current_pc = ctx->last_branch;
979 ctx->pipe_index++;
980 continue;
981 break;
982 case 0x4: /* periodic synchronization point */
983 next_pc = ctx->last_branch;
984 /* if we had no valid PC prior to this synchronization point,
985 * we have to move on with the next trace cycle
986 */
987 if (!current_pc_ok)
988 {
989 command_print(cmd_ctx, "--- periodic synchronization point at 0x%8.8" PRIx32 " ---", next_pc);
990 ctx->current_pc = next_pc;
991 ctx->pipe_index++;
992 continue;
993 }
994 break;
995 default: /* reserved */
996 LOG_ERROR("BUG: branch reason code 0x%" PRIx32 " is reserved", ctx->last_branch_reason);
997 return ERROR_FAIL;
998 }
999
1000 /* if we got here the branch was a normal PC change
1001 * (or a periodic synchronization point, which means the same for that matter)
1002 * if we didn't accquire a complete PC continue with the next cycle
1003 */
1004 if (!ctx->pc_ok)
1005 continue;
1006
1007 /* indirect branch to the exception vector means an exception occured */
1008 if ((ctx->last_branch <= 0x20)
1009 || ((ctx->last_branch >= 0xffff0000) && (ctx->last_branch <= 0xffff0020)))
1010 {
1011 if ((ctx->last_branch & 0xff) == 0x10)
1012 {
1013 command_print(cmd_ctx, "data abort");
1014 }
1015 else
1016 {
1017 command_print(cmd_ctx, "exception vector 0x%2.2" PRIx32 "", ctx->last_branch);
1018 ctx->current_pc = ctx->last_branch;
1019 ctx->pipe_index++;
1020 continue;
1021 }
1022 }
1023 }
1024
1025 /* an instruction was executed (or not, depending on the condition flags)
1026 * retrieve it from the image for displaying */
1027 if (ctx->pc_ok && (pipestat != STAT_WT) && (pipestat != STAT_TD) &&
1028 !(((pipestat == STAT_BE) || (pipestat == STAT_BD)) &&
1029 ((ctx->last_branch_reason != 0x0) && (ctx->last_branch_reason != 0x4))))
1030 {
1031 if ((retval = etm_read_instruction(ctx, &instruction)) != ERROR_OK)
1032 {
1033 /* can't continue tracing with no image available */
1034 if (retval == ERROR_TRACE_IMAGE_UNAVAILABLE)
1035 {
1036 return retval;
1037 }
1038 else if (retval == ERROR_TRACE_INSTRUCTION_UNAVAILABLE)
1039 {
1040 /* TODO: handle incomplete images
1041 * for now we just quit the analsysis*/
1042 return retval;
1043 }
1044 }
1045
1046 cycles = old_index - last_instruction;
1047 }
1048
1049 if ((pipestat == STAT_ID) || (pipestat == STAT_BD))
1050 {
1051 uint32_t new_data_index = ctx->data_index;
1052 uint32_t new_data_half = ctx->data_half;
1053
1054 /* in case of a branch with data, the branch target address was consumed before
1055 * we temporarily go back to the saved data index */
1056 if (pipestat == STAT_BD)
1057 {
1058 ctx->data_index = old_data_index;
1059 ctx->data_half = old_data_half;
1060 }
1061
1062 if (ctx->tracemode & ETMV1_TRACE_ADDR)
1063 {
1064 uint8_t packet;
1065 int shift = 0;
1066
1067 do {
1068 if ((retval = etmv1_next_packet(ctx, &packet, 0)) != 0)
1069 return ERROR_ETM_ANALYSIS_FAILED;
1070 ctx->last_ptr &= ~(0x7f << shift);
1071 ctx->last_ptr |= (packet & 0x7f) << shift;
1072 shift += 7;
1073 } while ((packet & 0x80) && (shift < 32));
1074
1075 if (shift >= 32)
1076 ctx->ptr_ok = 1;
1077
1078 if (ctx->ptr_ok)
1079 {
1080 command_print(cmd_ctx, "address: 0x%8.8" PRIx32 "", ctx->last_ptr);
1081 }
1082 }
1083
1084 if (ctx->tracemode & ETMV1_TRACE_DATA)
1085 {
1086 if ((instruction.type == ARM_LDM) || (instruction.type == ARM_STM))
1087 {
1088 int i;
1089 for (i = 0; i < 16; i++)
1090 {
1091 if (instruction.info.load_store_multiple.register_list & (1 << i))
1092 {
1093 uint32_t data;
1094 if (etmv1_data(ctx, 4, &data) != 0)
1095 return ERROR_ETM_ANALYSIS_FAILED;
1096 command_print(cmd_ctx, "data: 0x%8.8" PRIx32 "", data);
1097 }
1098 }
1099 }
1100 else if ((instruction.type >= ARM_LDR) && (instruction.type <= ARM_STRH))
1101 {
1102 uint32_t data;
1103 if (etmv1_data(ctx, arm_access_size(&instruction), &data) != 0)
1104 return ERROR_ETM_ANALYSIS_FAILED;
1105 command_print(cmd_ctx, "data: 0x%8.8" PRIx32 "", data);
1106 }
1107 }
1108
1109 /* restore data index after consuming BD address and data */
1110 if (pipestat == STAT_BD)
1111 {
1112 ctx->data_index = new_data_index;
1113 ctx->data_half = new_data_half;
1114 }
1115 }
1116
1117 /* adjust PC */
1118 if ((pipestat == STAT_IE) || (pipestat == STAT_ID))
1119 {
1120 if (((instruction.type == ARM_B) ||
1121 (instruction.type == ARM_BL) ||
1122 (instruction.type == ARM_BLX)) &&
1123 (instruction.info.b_bl_bx_blx.target_address != 0xffffffff))
1124 {
1125 next_pc = instruction.info.b_bl_bx_blx.target_address;
1126 }
1127 else
1128 {
1129 next_pc += (ctx->core_state == ARMV4_5_STATE_ARM) ? 4 : 2;
1130 }
1131 }
1132 else if (pipestat == STAT_IN)
1133 {
1134 next_pc += (ctx->core_state == ARMV4_5_STATE_ARM) ? 4 : 2;
1135 }
1136
1137 if ((pipestat != STAT_TD) && (pipestat != STAT_WT))
1138 {
1139 char cycles_text[32] = "";
1140
1141 /* if the trace was captured with cycle accurate tracing enabled,
1142 * output the number of cycles since the last executed instruction
1143 */
1144 if (ctx->tracemode & ETMV1_CYCLE_ACCURATE)
1145 {
1146 snprintf(cycles_text, 32, " (%i %s)",
1147 (int)cycles,
1148 (cycles == 1) ? "cycle" : "cycles");
1149 }
1150
1151 command_print(cmd_ctx, "%s%s%s",
1152 instruction.text,
1153 (pipestat == STAT_IN) ? " (not executed)" : "",
1154 cycles_text);
1155
1156 ctx->current_pc = next_pc;
1157
1158 /* packets for an instruction don't start on or before the preceding
1159 * functional pipestat (i.e. other than WT or TD)
1160 */
1161 if (ctx->data_index <= ctx->pipe_index)
1162 {
1163 ctx->data_index = ctx->pipe_index + 1;
1164 ctx->data_half = 0;
1165 }
1166 }
1167
1168 ctx->pipe_index += 1;
1169 }
1170
1171 return ERROR_OK;
1172 }
1173
1174 static COMMAND_HELPER(handle_etm_tracemode_command_update,
1175 etmv1_tracemode_t *mode)
1176 {
1177 etmv1_tracemode_t tracemode;
1178
1179 /* what parts of data access are traced? */
1180 if (strcmp(CMD_ARGV[0], "none") == 0)
1181 tracemode = ETMV1_TRACE_NONE;
1182 else if (strcmp(CMD_ARGV[0], "data") == 0)
1183 tracemode = ETMV1_TRACE_DATA;
1184 else if (strcmp(CMD_ARGV[0], "address") == 0)
1185 tracemode = ETMV1_TRACE_ADDR;
1186 else if (strcmp(CMD_ARGV[0], "all") == 0)
1187 tracemode = ETMV1_TRACE_DATA | ETMV1_TRACE_ADDR;
1188 else
1189 {
1190 command_print(CMD_CTX, "invalid option '%s'", CMD_ARGV[0]);
1191 return ERROR_INVALID_ARGUMENTS;
1192 }
1193
1194 uint8_t context_id;
1195 COMMAND_PARSE_NUMBER(u8, CMD_ARGV[1], context_id);
1196 switch (context_id)
1197 {
1198 case 0:
1199 tracemode |= ETMV1_CONTEXTID_NONE;
1200 break;
1201 case 8:
1202 tracemode |= ETMV1_CONTEXTID_8;
1203 break;
1204 case 16:
1205 tracemode |= ETMV1_CONTEXTID_16;
1206 break;
1207 case 32:
1208 tracemode |= ETMV1_CONTEXTID_32;
1209 break;
1210 default:
1211 command_print(CMD_CTX, "invalid option '%s'", CMD_ARGV[1]);
1212 return ERROR_INVALID_ARGUMENTS;
1213 }
1214
1215 bool etmv1_cycle_accurate;
1216 COMMAND_PARSE_ENABLE(CMD_ARGV[2], etmv1_cycle_accurate);
1217 if (etmv1_cycle_accurate)
1218 tracemode |= ETMV1_CYCLE_ACCURATE;
1219
1220 bool etmv1_branch_output;
1221 COMMAND_PARSE_ENABLE(CMD_ARGV[3], etmv1_branch_output);
1222 tracemode |= ETMV1_BRANCH_OUTPUT;
1223
1224 /* IGNORED:
1225 * - CPRT tracing (coprocessor register transfers)
1226 * - debug request (causes debug entry on trigger)
1227 * - stall on FIFOFULL (preventing tracedata lossage)
1228 */
1229 *mode = tracemode;
1230
1231 return ERROR_OK;
1232 }
1233
1234 COMMAND_HANDLER(handle_etm_tracemode_command)
1235 {
1236 struct target *target = get_current_target(CMD_CTX);
1237 struct arm *arm = target_to_arm(target);
1238 struct etm_context *etm;
1239
1240 if (!is_arm(arm)) {
1241 command_print(CMD_CTX, "ETM: current target isn't an ARM");
1242 return ERROR_FAIL;
1243 }
1244
1245 etm = arm->etm;
1246 if (!etm) {
1247 command_print(CMD_CTX, "current target doesn't have an ETM configured");
1248 return ERROR_FAIL;
1249 }
1250
1251 etmv1_tracemode_t tracemode = etm->tracemode;
1252
1253 switch (CMD_ARGC)
1254 {
1255 case 0:
1256 break;
1257 case 4:
1258 CALL_COMMAND_HANDLER(handle_etm_tracemode_command_update, &tracemode);
1259 break;
1260 default:
1261 command_print(CMD_CTX, "usage: configure trace mode "
1262 "<none | data | address | all> "
1263 "<context id bits> <cycle accurate> <branch output>");
1264 return ERROR_FAIL;
1265 }
1266
1267 /**
1268 * todo: fail if parameters were invalid for this hardware,
1269 * or couldn't be written; display actual hardware state...
1270 */
1271
1272 command_print(CMD_CTX, "current tracemode configuration:");
1273
1274 switch (tracemode & ETMV1_TRACE_MASK)
1275 {
1276 case ETMV1_TRACE_NONE:
1277 command_print(CMD_CTX, "data tracing: none");
1278 break;
1279 case ETMV1_TRACE_DATA:
1280 command_print(CMD_CTX, "data tracing: data only");
1281 break;
1282 case ETMV1_TRACE_ADDR:
1283 command_print(CMD_CTX, "data tracing: address only");
1284 break;
1285 case ETMV1_TRACE_DATA | ETMV1_TRACE_ADDR:
1286 command_print(CMD_CTX, "data tracing: address and data");
1287 break;
1288 }
1289
1290 switch (tracemode & ETMV1_CONTEXTID_MASK)
1291 {
1292 case ETMV1_CONTEXTID_NONE:
1293 command_print(CMD_CTX, "contextid tracing: none");
1294 break;
1295 case ETMV1_CONTEXTID_8:
1296 command_print(CMD_CTX, "contextid tracing: 8 bit");
1297 break;
1298 case ETMV1_CONTEXTID_16:
1299 command_print(CMD_CTX, "contextid tracing: 16 bit");
1300 break;
1301 case ETMV1_CONTEXTID_32:
1302 command_print(CMD_CTX, "contextid tracing: 32 bit");
1303 break;
1304 }
1305
1306 if (tracemode & ETMV1_CYCLE_ACCURATE)
1307 {
1308 command_print(CMD_CTX, "cycle-accurate tracing enabled");
1309 }
1310 else
1311 {
1312 command_print(CMD_CTX, "cycle-accurate tracing disabled");
1313 }
1314
1315 if (tracemode & ETMV1_BRANCH_OUTPUT)
1316 {
1317 command_print(CMD_CTX, "full branch address output enabled");
1318 }
1319 else
1320 {
1321 command_print(CMD_CTX, "full branch address output disabled");
1322 }
1323
1324 /* only update ETM_CTRL register if tracemode changed */
1325 if (etm->tracemode != tracemode)
1326 {
1327 struct reg *etm_ctrl_reg;
1328
1329 etm_ctrl_reg = etm_reg_lookup(etm, ETM_CTRL);
1330 if (!etm_ctrl_reg)
1331 return ERROR_FAIL;
1332
1333 etm_get_reg(etm_ctrl_reg);
1334
1335 buf_set_u32(etm_ctrl_reg->value, 2, 2, tracemode & ETMV1_TRACE_MASK);
1336 buf_set_u32(etm_ctrl_reg->value, 14, 2, (tracemode & ETMV1_CONTEXTID_MASK) >> 4);
1337 buf_set_u32(etm_ctrl_reg->value, 12, 1, (tracemode & ETMV1_CYCLE_ACCURATE) >> 8);
1338 buf_set_u32(etm_ctrl_reg->value, 8, 1, (tracemode & ETMV1_BRANCH_OUTPUT) >> 9);
1339 etm_store_reg(etm_ctrl_reg);
1340
1341 etm->tracemode = tracemode;
1342
1343 /* invalidate old trace data */
1344 etm->capture_status = TRACE_IDLE;
1345 if (etm->trace_depth > 0)
1346 {
1347 free(etm->trace_data);
1348 etm->trace_data = NULL;
1349 }
1350 etm->trace_depth = 0;
1351 }
1352
1353 return ERROR_OK;
1354 }
1355
1356 COMMAND_HANDLER(handle_etm_config_command)
1357 {
1358 struct target *target;
1359 struct arm *arm;
1360 etm_portmode_t portmode = 0x0;
1361 struct etm_context *etm_ctx;
1362 int i;
1363
1364 if (CMD_ARGC != 5)
1365 return ERROR_COMMAND_SYNTAX_ERROR;
1366
1367 target = get_target(CMD_ARGV[0]);
1368 if (!target)
1369 {
1370 LOG_ERROR("target '%s' not defined", CMD_ARGV[0]);
1371 return ERROR_FAIL;
1372 }
1373
1374 arm = target_to_arm(target);
1375 if (!is_arm(arm)) {
1376 command_print(CMD_CTX, "target '%s' is '%s'; not an ARM",
1377 target->cmd_name, target_get_name(target));
1378 return ERROR_FAIL;
1379 }
1380
1381 /* FIXME for ETMv3.0 and above -- and we don't yet know what ETM
1382 * version we'll be using!! -- so we can't know how to validate
1383 * params yet. "etm config" should likely be *AFTER* hookup...
1384 *
1385 * - Many more widths might be supported ... and we can easily
1386 * check whether our setting "took".
1387 *
1388 * - The "clock" and "mode" bits are interpreted differently.
1389 * See ARM IHI 0014O table 2-17 for the old behavior, and
1390 * table 2-18 for the new. With ETB it's best to specify
1391 * "normal full" ...
1392 */
1393 uint8_t port_width;
1394 COMMAND_PARSE_NUMBER(u8, CMD_ARGV[1], port_width);
1395 switch (port_width)
1396 {
1397 /* before ETMv3.0 */
1398 case 4:
1399 portmode |= ETM_PORT_4BIT;
1400 break;
1401 case 8:
1402 portmode |= ETM_PORT_8BIT;
1403 break;
1404 case 16:
1405 portmode |= ETM_PORT_16BIT;
1406 break;
1407 /* ETMv3.0 and later*/
1408 case 24:
1409 portmode |= ETM_PORT_24BIT;
1410 break;
1411 case 32:
1412 portmode |= ETM_PORT_32BIT;
1413 break;
1414 case 48:
1415 portmode |= ETM_PORT_48BIT;
1416 break;
1417 case 64:
1418 portmode |= ETM_PORT_64BIT;
1419 break;
1420 case 1:
1421 portmode |= ETM_PORT_1BIT;
1422 break;
1423 case 2:
1424 portmode |= ETM_PORT_2BIT;
1425 break;
1426 default:
1427 command_print(CMD_CTX,
1428 "unsupported ETM port width '%s'", CMD_ARGV[1]);
1429 return ERROR_FAIL;
1430 }
1431
1432 if (strcmp("normal", CMD_ARGV[2]) == 0)
1433 {
1434 portmode |= ETM_PORT_NORMAL;
1435 }
1436 else if (strcmp("multiplexed", CMD_ARGV[2]) == 0)
1437 {
1438 portmode |= ETM_PORT_MUXED;
1439 }
1440 else if (strcmp("demultiplexed", CMD_ARGV[2]) == 0)
1441 {
1442 portmode |= ETM_PORT_DEMUXED;
1443 }
1444 else
1445 {
1446 command_print(CMD_CTX, "unsupported ETM port mode '%s', must be 'normal', 'multiplexed' or 'demultiplexed'", CMD_ARGV[2]);
1447 return ERROR_FAIL;
1448 }
1449
1450 if (strcmp("half", CMD_ARGV[3]) == 0)
1451 {
1452 portmode |= ETM_PORT_HALF_CLOCK;
1453 }
1454 else if (strcmp("full", CMD_ARGV[3]) == 0)
1455 {
1456 portmode |= ETM_PORT_FULL_CLOCK;
1457 }
1458 else
1459 {
1460 command_print(CMD_CTX, "unsupported ETM port clocking '%s', must be 'full' or 'half'", CMD_ARGV[3]);
1461 return ERROR_FAIL;
1462 }
1463
1464 etm_ctx = calloc(1, sizeof(struct etm_context));
1465 if (!etm_ctx) {
1466 LOG_DEBUG("out of memory");
1467 return ERROR_FAIL;
1468 }
1469
1470 for (i = 0; etm_capture_drivers[i]; i++)
1471 {
1472 if (strcmp(CMD_ARGV[4], etm_capture_drivers[i]->name) == 0)
1473 {
1474 int retval = register_commands(CMD_CTX, NULL,
1475 etm_capture_drivers[i]->commands);
1476 if (ERROR_OK != retval)
1477 {
1478 free(etm_ctx);
1479 return retval;
1480 }
1481
1482 etm_ctx->capture_driver = etm_capture_drivers[i];
1483
1484 break;
1485 }
1486 }
1487
1488 if (!etm_capture_drivers[i])
1489 {
1490 /* no supported capture driver found, don't register an ETM */
1491 free(etm_ctx);
1492 LOG_ERROR("trace capture driver '%s' not found", CMD_ARGV[4]);
1493 return ERROR_FAIL;
1494 }
1495
1496 etm_ctx->target = target;
1497 etm_ctx->trigger_percent = 50;
1498 etm_ctx->trace_data = NULL;
1499 etm_ctx->portmode = portmode;
1500 etm_ctx->core_state = ARMV4_5_STATE_ARM;
1501
1502 arm->etm = etm_ctx;
1503
1504 return etm_register_user_commands(CMD_CTX);
1505 }
1506
1507 COMMAND_HANDLER(handle_etm_info_command)
1508 {
1509 struct target *target;
1510 struct arm *arm;
1511 struct etm_context *etm;
1512 struct reg *etm_sys_config_reg;
1513 int max_port_size;
1514 uint32_t config;
1515
1516 target = get_current_target(CMD_CTX);
1517 arm = target_to_arm(target);
1518 if (!is_arm(arm))
1519 {
1520 command_print(CMD_CTX, "ETM: current target isn't an ARM");
1521 return ERROR_FAIL;
1522 }
1523
1524 etm = arm->etm;
1525 if (!etm)
1526 {
1527 command_print(CMD_CTX, "current target doesn't have an ETM configured");
1528 return ERROR_FAIL;
1529 }
1530
1531 command_print(CMD_CTX, "ETM v%d.%d",
1532 etm->bcd_vers >> 4, etm->bcd_vers & 0xf);
1533 command_print(CMD_CTX, "pairs of address comparators: %i",
1534 (int) (etm->config >> 0) & 0x0f);
1535 command_print(CMD_CTX, "data comparators: %i",
1536 (int) (etm->config >> 4) & 0x0f);
1537 command_print(CMD_CTX, "memory map decoders: %i",
1538 (int) (etm->config >> 8) & 0x1f);
1539 command_print(CMD_CTX, "number of counters: %i",
1540 (int) (etm->config >> 13) & 0x07);
1541 command_print(CMD_CTX, "sequencer %spresent",
1542 (int) (etm->config & (1 << 16)) ? "" : "not ");
1543 command_print(CMD_CTX, "number of ext. inputs: %i",
1544 (int) (etm->config >> 17) & 0x07);
1545 command_print(CMD_CTX, "number of ext. outputs: %i",
1546 (int) (etm->config >> 20) & 0x07);
1547 command_print(CMD_CTX, "FIFO full %spresent",
1548 (int) (etm->config & (1 << 23)) ? "" : "not ");
1549 if (etm->bcd_vers < 0x20)
1550 command_print(CMD_CTX, "protocol version: %i",
1551 (int) (etm->config >> 28) & 0x07);
1552 else {
1553 command_print(CMD_CTX,
1554 "coprocessor and memory access %ssupported",
1555 (etm->config & (1 << 26)) ? "" : "not ");
1556 command_print(CMD_CTX, "trace start/stop %spresent",
1557 (etm->config & (1 << 26)) ? "" : "not ");
1558 command_print(CMD_CTX, "number of context comparators: %i",
1559 (int) (etm->config >> 24) & 0x03);
1560 }
1561
1562 /* SYS_CONFIG isn't present before ETMv1.2 */
1563 etm_sys_config_reg = etm_reg_lookup(etm, ETM_SYS_CONFIG);
1564 if (!etm_sys_config_reg)
1565 return ERROR_OK;
1566
1567 etm_get_reg(etm_sys_config_reg);
1568 config = buf_get_u32(etm_sys_config_reg->value, 0, 32);
1569
1570 LOG_DEBUG("ETM SYS CONFIG %08x", (unsigned) config);
1571
1572 max_port_size = config & 0x7;
1573 if (etm->bcd_vers >= 0x30)
1574 max_port_size |= (config >> 6) & 0x08;
1575 switch (max_port_size)
1576 {
1577 /* before ETMv3.0 */
1578 case 0:
1579 max_port_size = 4;
1580 break;
1581 case 1:
1582 max_port_size = 8;
1583 break;
1584 case 2:
1585 max_port_size = 16;
1586 break;
1587 /* ETMv3.0 and later*/
1588 case 3:
1589 max_port_size = 24;
1590 break;
1591 case 4:
1592 max_port_size = 32;
1593 break;
1594 case 5:
1595 max_port_size = 48;
1596 break;
1597 case 6:
1598 max_port_size = 64;
1599 break;
1600 case 8:
1601 max_port_size = 1;
1602 break;
1603 case 9:
1604 max_port_size = 2;
1605 break;
1606 default:
1607 LOG_ERROR("Illegal max_port_size");
1608 return ERROR_FAIL;
1609 }
1610 command_print(CMD_CTX, "max. port size: %i", max_port_size);
1611
1612 if (etm->bcd_vers < 0x30) {
1613 command_print(CMD_CTX, "half-rate clocking %ssupported",
1614 (config & (1 << 3)) ? "" : "not ");
1615 command_print(CMD_CTX, "full-rate clocking %ssupported",
1616 (config & (1 << 4)) ? "" : "not ");
1617 command_print(CMD_CTX, "normal trace format %ssupported",
1618 (config & (1 << 5)) ? "" : "not ");
1619 command_print(CMD_CTX, "multiplex trace format %ssupported",
1620 (config & (1 << 6)) ? "" : "not ");
1621 command_print(CMD_CTX, "demultiplex trace format %ssupported",
1622 (config & (1 << 7)) ? "" : "not ");
1623 } else {
1624 /* REVISIT show which size and format are selected ... */
1625 command_print(CMD_CTX, "current port size %ssupported",
1626 (config & (1 << 10)) ? "" : "not ");
1627 command_print(CMD_CTX, "current trace format %ssupported",
1628 (config & (1 << 11)) ? "" : "not ");
1629 }
1630 if (etm->bcd_vers >= 0x21)
1631 command_print(CMD_CTX, "fetch comparisons %ssupported",
1632 (config & (1 << 17)) ? "not " : "");
1633 command_print(CMD_CTX, "FIFO full %ssupported",
1634 (config & (1 << 8)) ? "" : "not ");
1635
1636 return ERROR_OK;
1637 }
1638
1639 COMMAND_HANDLER(handle_etm_status_command)
1640 {
1641 struct target *target;
1642 struct arm *arm;
1643 struct etm_context *etm;
1644 trace_status_t trace_status;
1645
1646 target = get_current_target(CMD_CTX);
1647 arm = target_to_arm(target);
1648 if (!is_arm(arm))
1649 {
1650 command_print(CMD_CTX, "ETM: current target isn't an ARM");
1651 return ERROR_FAIL;
1652 }
1653
1654 etm = arm->etm;
1655 if (!etm)
1656 {
1657 command_print(CMD_CTX, "current target doesn't have an ETM configured");
1658 return ERROR_FAIL;
1659 }
1660
1661 /* ETM status */
1662 if (etm->bcd_vers >= 0x11) {
1663 struct reg *reg;
1664
1665 reg = etm_reg_lookup(etm, ETM_STATUS);
1666 if (!reg)
1667 return ERROR_FAIL;
1668 if (etm_get_reg(reg) == ERROR_OK) {
1669 unsigned s = buf_get_u32(reg->value, 0, reg->size);
1670
1671 command_print(CMD_CTX, "etm: %s%s%s%s",
1672 /* bit(1) == progbit */
1673 (etm->bcd_vers >= 0x12)
1674 ? ((s & (1 << 1))
1675 ? "disabled" : "enabled")
1676 : "?",
1677 ((s & (1 << 3)) && etm->bcd_vers >= 0x31)
1678 ? " triggered" : "",
1679 ((s & (1 << 2)) && etm->bcd_vers >= 0x12)
1680 ? " start/stop" : "",
1681 ((s & (1 << 0)) && etm->bcd_vers >= 0x11)
1682 ? " untraced-overflow" : "");
1683 } /* else ignore and try showing trace port status */
1684 }
1685
1686 /* Trace Port Driver status */
1687 trace_status = etm->capture_driver->status(etm);
1688 if (trace_status == TRACE_IDLE)
1689 {
1690 command_print(CMD_CTX, "%s: idle", etm->capture_driver->name);
1691 }
1692 else
1693 {
1694 static char *completed = " completed";
1695 static char *running = " is running";
1696 static char *overflowed = ", overflowed";
1697 static char *triggered = ", triggered";
1698
1699 command_print(CMD_CTX, "%s: trace collection%s%s%s",
1700 etm->capture_driver->name,
1701 (trace_status & TRACE_RUNNING) ? running : completed,
1702 (trace_status & TRACE_OVERFLOWED) ? overflowed : "",
1703 (trace_status & TRACE_TRIGGERED) ? triggered : "");
1704
1705 if (etm->trace_depth > 0)
1706 {
1707 command_print(CMD_CTX, "%i frames of trace data read",
1708 (int)(etm->trace_depth));
1709 }
1710 }
1711
1712 return ERROR_OK;
1713 }
1714
1715 COMMAND_HANDLER(handle_etm_image_command)
1716 {
1717 struct target *target;
1718 struct arm *arm;
1719 struct etm_context *etm_ctx;
1720
1721 if (CMD_ARGC < 1)
1722 {
1723 command_print(CMD_CTX, "usage: etm image <file> [base address] [type]");
1724 return ERROR_FAIL;
1725 }
1726
1727 target = get_current_target(CMD_CTX);
1728 arm = target_to_arm(target);
1729 if (!is_arm(arm))
1730 {
1731 command_print(CMD_CTX, "ETM: current target isn't an ARM");
1732 return ERROR_FAIL;
1733 }
1734
1735 etm_ctx = arm->etm;
1736 if (!etm_ctx)
1737 {
1738 command_print(CMD_CTX, "current target doesn't have an ETM configured");
1739 return ERROR_FAIL;
1740 }
1741
1742 if (etm_ctx->image)
1743 {
1744 image_close(etm_ctx->image);
1745 free(etm_ctx->image);
1746 command_print(CMD_CTX, "previously loaded image found and closed");
1747 }
1748
1749 etm_ctx->image = malloc(sizeof(struct image));
1750 etm_ctx->image->base_address_set = 0;
1751 etm_ctx->image->start_address_set = 0;
1752
1753 /* a base address isn't always necessary, default to 0x0 (i.e. don't relocate) */
1754 if (CMD_ARGC >= 2)
1755 {
1756 etm_ctx->image->base_address_set = 1;
1757 COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], etm_ctx->image->base_address);
1758 }
1759 else
1760 {
1761 etm_ctx->image->base_address_set = 0;
1762 }
1763
1764 if (image_open(etm_ctx->image, CMD_ARGV[0], (CMD_ARGC >= 3) ? CMD_ARGV[2] : NULL) != ERROR_OK)
1765 {
1766 free(etm_ctx->image);
1767 etm_ctx->image = NULL;
1768 return ERROR_FAIL;
1769 }
1770
1771 return ERROR_OK;
1772 }
1773
1774 COMMAND_HANDLER(handle_etm_dump_command)
1775 {
1776 struct fileio file;
1777 struct target *target;
1778 struct arm *arm;
1779 struct etm_context *etm_ctx;
1780 uint32_t i;
1781
1782 if (CMD_ARGC != 1)
1783 {
1784 command_print(CMD_CTX, "usage: etm dump <file>");
1785 return ERROR_FAIL;
1786 }
1787
1788 target = get_current_target(CMD_CTX);
1789 arm = target_to_arm(target);
1790 if (!is_arm(arm))
1791 {
1792 command_print(CMD_CTX, "ETM: current target isn't an ARM");
1793 return ERROR_FAIL;
1794 }
1795
1796 etm_ctx = arm->etm;
1797 if (!etm_ctx)
1798 {
1799 command_print(CMD_CTX, "current target doesn't have an ETM configured");
1800 return ERROR_FAIL;
1801 }
1802
1803 if (etm_ctx->capture_driver->status == TRACE_IDLE)
1804 {
1805 command_print(CMD_CTX, "trace capture wasn't enabled, no trace data captured");
1806 return ERROR_OK;
1807 }
1808
1809 if (etm_ctx->capture_driver->status(etm_ctx) & TRACE_RUNNING)
1810 {
1811 /* TODO: if on-the-fly capture is to be supported, this needs to be changed */
1812 command_print(CMD_CTX, "trace capture not completed");
1813 return ERROR_FAIL;
1814 }
1815
1816 /* read the trace data if it wasn't read already */
1817 if (etm_ctx->trace_depth == 0)
1818 etm_ctx->capture_driver->read_trace(etm_ctx);
1819
1820 if (fileio_open(&file, CMD_ARGV[0], FILEIO_WRITE, FILEIO_BINARY) != ERROR_OK)
1821 {
1822 return ERROR_FAIL;
1823 }
1824
1825 fileio_write_u32(&file, etm_ctx->capture_status);
1826 fileio_write_u32(&file, etm_ctx->portmode);
1827 fileio_write_u32(&file, etm_ctx->tracemode);
1828 fileio_write_u32(&file, etm_ctx->trace_depth);
1829
1830 for (i = 0; i < etm_ctx->trace_depth; i++)
1831 {
1832 fileio_write_u32(&file, etm_ctx->trace_data[i].pipestat);
1833 fileio_write_u32(&file, etm_ctx->trace_data[i].packet);
1834 fileio_write_u32(&file, etm_ctx->trace_data[i].flags);
1835 }
1836
1837 fileio_close(&file);
1838
1839 return ERROR_OK;
1840 }
1841
1842 COMMAND_HANDLER(handle_etm_load_command)
1843 {
1844 struct fileio file;
1845 struct target *target;
1846 struct arm *arm;
1847 struct etm_context *etm_ctx;
1848 uint32_t i;
1849
1850 if (CMD_ARGC != 1)
1851 {
1852 command_print(CMD_CTX, "usage: etm load <file>");
1853 return ERROR_FAIL;
1854 }
1855
1856 target = get_current_target(CMD_CTX);
1857 arm = target_to_arm(target);
1858 if (!is_arm(arm))
1859 {
1860 command_print(CMD_CTX, "ETM: current target isn't an ARM");
1861 return ERROR_FAIL;
1862 }
1863
1864 etm_ctx = arm->etm;
1865 if (!etm_ctx)
1866 {
1867 command_print(CMD_CTX, "current target doesn't have an ETM configured");
1868 return ERROR_FAIL;
1869 }
1870
1871 if (etm_ctx->capture_driver->status(etm_ctx) & TRACE_RUNNING)
1872 {
1873 command_print(CMD_CTX, "trace capture running, stop first");
1874 return ERROR_FAIL;
1875 }
1876
1877 if (fileio_open(&file, CMD_ARGV[0], FILEIO_READ, FILEIO_BINARY) != ERROR_OK)
1878 {
1879 return ERROR_FAIL;
1880 }
1881
1882 if (file.size % 4)
1883 {
1884 command_print(CMD_CTX, "size isn't a multiple of 4, no valid trace data");
1885 fileio_close(&file);
1886 return ERROR_FAIL;
1887 }
1888
1889 if (etm_ctx->trace_depth > 0)
1890 {
1891 free(etm_ctx->trace_data);
1892 etm_ctx->trace_data = NULL;
1893 }
1894
1895 {
1896 uint32_t tmp;
1897 fileio_read_u32(&file, &tmp); etm_ctx->capture_status = tmp;
1898 fileio_read_u32(&file, &tmp); etm_ctx->portmode = tmp;
1899 fileio_read_u32(&file, &tmp); etm_ctx->tracemode = tmp;
1900 fileio_read_u32(&file, &etm_ctx->trace_depth);
1901 }
1902 etm_ctx->trace_data = malloc(sizeof(struct etmv1_trace_data) * etm_ctx->trace_depth);
1903 if (etm_ctx->trace_data == NULL)
1904 {
1905 command_print(CMD_CTX, "not enough memory to perform operation");
1906 fileio_close(&file);
1907 return ERROR_FAIL;
1908 }
1909
1910 for (i = 0; i < etm_ctx->trace_depth; i++)
1911 {
1912 uint32_t pipestat, packet, flags;
1913 fileio_read_u32(&file, &pipestat);
1914 fileio_read_u32(&file, &packet);
1915 fileio_read_u32(&file, &flags);
1916 etm_ctx->trace_data[i].pipestat = pipestat & 0xff;
1917 etm_ctx->trace_data[i].packet = packet & 0xffff;
1918 etm_ctx->trace_data[i].flags = flags;
1919 }
1920
1921 fileio_close(&file);
1922
1923 return ERROR_OK;
1924 }
1925
1926 COMMAND_HANDLER(handle_etm_trigger_percent_command)
1927 {
1928 struct target *target;
1929 struct arm *arm;
1930 struct etm_context *etm_ctx;
1931
1932 target = get_current_target(CMD_CTX);
1933 arm = target_to_arm(target);
1934 if (!is_arm(arm))
1935 {
1936 command_print(CMD_CTX, "ETM: current target isn't an ARM");
1937 return ERROR_FAIL;
1938 }
1939
1940 etm_ctx = arm->etm;
1941 if (!etm_ctx)
1942 {
1943 command_print(CMD_CTX, "current target doesn't have an ETM configured");
1944 return ERROR_FAIL;
1945 }
1946
1947 if (CMD_ARGC > 0)
1948 {
1949 uint32_t new_value;
1950 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], new_value);
1951
1952 if ((new_value < 2) || (new_value > 100))
1953 {
1954 command_print(CMD_CTX, "valid settings are 2%% to 100%%");
1955 }
1956 else
1957 {
1958 etm_ctx->trigger_percent = new_value;
1959 }
1960 }
1961
1962 command_print(CMD_CTX, "%i percent of the tracebuffer reserved for after the trigger", ((int)(etm_ctx->trigger_percent)));
1963
1964 return ERROR_OK;
1965 }
1966
1967 COMMAND_HANDLER(handle_etm_start_command)
1968 {
1969 struct target *target;
1970 struct arm *arm;
1971 struct etm_context *etm_ctx;
1972 struct reg *etm_ctrl_reg;
1973
1974 target = get_current_target(CMD_CTX);
1975 arm = target_to_arm(target);
1976 if (!is_arm(arm))
1977 {
1978 command_print(CMD_CTX, "ETM: current target isn't an ARM");
1979 return ERROR_FAIL;
1980 }
1981
1982 etm_ctx = arm->etm;
1983 if (!etm_ctx)
1984 {
1985 command_print(CMD_CTX, "current target doesn't have an ETM configured");
1986 return ERROR_FAIL;
1987 }
1988
1989 /* invalidate old tracing data */
1990 etm_ctx->capture_status = TRACE_IDLE;
1991 if (etm_ctx->trace_depth > 0)
1992 {
1993 free(etm_ctx->trace_data);
1994 etm_ctx->trace_data = NULL;
1995 }
1996 etm_ctx->trace_depth = 0;
1997
1998 etm_ctrl_reg = etm_reg_lookup(etm_ctx, ETM_CTRL);
1999 if (!etm_ctrl_reg)
2000 return ERROR_FAIL;
2001
2002 etm_get_reg(etm_ctrl_reg);
2003
2004 /* Clear programming bit (10), set port selection bit (11) */
2005 buf_set_u32(etm_ctrl_reg->value, 10, 2, 0x2);
2006
2007 etm_store_reg(etm_ctrl_reg);
2008 jtag_execute_queue();
2009
2010 etm_ctx->capture_driver->start_capture(etm_ctx);
2011
2012 return ERROR_OK;
2013 }
2014
2015 COMMAND_HANDLER(handle_etm_stop_command)
2016 {
2017 struct target *target;
2018 struct arm *arm;
2019 struct etm_context *etm_ctx;
2020 struct reg *etm_ctrl_reg;
2021
2022 target = get_current_target(CMD_CTX);
2023 arm = target_to_arm(target);
2024 if (!is_arm(arm))
2025 {
2026 command_print(CMD_CTX, "ETM: current target isn't an ARM");
2027 return ERROR_FAIL;
2028 }
2029
2030 etm_ctx = arm->etm;
2031 if (!etm_ctx)
2032 {
2033 command_print(CMD_CTX, "current target doesn't have an ETM configured");
2034 return ERROR_FAIL;
2035 }
2036
2037 etm_ctrl_reg = etm_reg_lookup(etm_ctx, ETM_CTRL);
2038 if (!etm_ctrl_reg)
2039 return ERROR_FAIL;
2040
2041 etm_get_reg(etm_ctrl_reg);
2042
2043 /* Set programming bit (10), clear port selection bit (11) */
2044 buf_set_u32(etm_ctrl_reg->value, 10, 2, 0x1);
2045
2046 etm_store_reg(etm_ctrl_reg);
2047 jtag_execute_queue();
2048
2049 etm_ctx->capture_driver->stop_capture(etm_ctx);
2050
2051 return ERROR_OK;
2052 }
2053
2054 COMMAND_HANDLER(handle_etm_analyze_command)
2055 {
2056 struct target *target;
2057 struct arm *arm;
2058 struct etm_context *etm_ctx;
2059 int retval;
2060
2061 target = get_current_target(CMD_CTX);
2062 arm = target_to_arm(target);
2063 if (!is_arm(arm))
2064 {
2065 command_print(CMD_CTX, "ETM: current target isn't an ARM");
2066 return ERROR_FAIL;
2067 }
2068
2069 etm_ctx = arm->etm;
2070 if (!etm_ctx)
2071 {
2072 command_print(CMD_CTX, "current target doesn't have an ETM configured");
2073 return ERROR_FAIL;
2074 }
2075
2076 if ((retval = etmv1_analyze_trace(etm_ctx, CMD_CTX)) != ERROR_OK)
2077 {
2078 switch (retval)
2079 {
2080 case ERROR_ETM_ANALYSIS_FAILED:
2081 command_print(CMD_CTX, "further analysis failed (corrupted trace data or just end of data");
2082 break;
2083 case ERROR_TRACE_INSTRUCTION_UNAVAILABLE:
2084 command_print(CMD_CTX, "no instruction for current address available, analysis aborted");
2085 break;
2086 case ERROR_TRACE_IMAGE_UNAVAILABLE:
2087 command_print(CMD_CTX, "no image available for trace analysis");
2088 break;
2089 default:
2090 command_print(CMD_CTX, "unknown error: %i", retval);
2091 }
2092 }
2093
2094 return retval;
2095 }
2096
2097 static const struct command_registration etm_config_command_handlers[] = {
2098 {
2099 .name = "config",
2100 .handler = &handle_etm_config_command,
2101 .mode = COMMAND_CONFIG,
2102 .usage = "<target> <port_width> <port_mode> "
2103 "<clocking> <capture_driver>",
2104 },
2105 COMMAND_REGISTRATION_DONE
2106 };
2107 const struct command_registration etm_command_handlers[] = {
2108 {
2109 .name = "etm",
2110 .mode = COMMAND_ANY,
2111 .help = "Emebdded Trace Macrocell command group",
2112 .chain = etm_config_command_handlers,
2113 },
2114 COMMAND_REGISTRATION_DONE
2115 };
2116
2117 static const struct command_registration etm_exec_command_handlers[] = {
2118 {
2119 .name = "tracemode", handle_etm_tracemode_command,
2120 .mode = COMMAND_EXEC,
2121 .help = "configure/display trace mode",
2122 .usage = "<none | data | address | all> "
2123 "<context_id_bits> <cycle_accurate> <branch_output>",
2124 },
2125 {
2126 .name = "info",
2127 .handler = &handle_etm_info_command,
2128 .mode = COMMAND_EXEC,
2129 .help = "display info about the current target's ETM",
2130 },
2131 {
2132 .name = "trigger_percent",
2133 .handler = &handle_etm_trigger_percent_command,
2134 .mode = COMMAND_EXEC,
2135 .help = "amount (<percent>) of trace buffer "
2136 "to be filled after the trigger occured",
2137 },
2138 {
2139 .name = "status",
2140 .handler = &handle_etm_status_command,
2141 .mode = COMMAND_EXEC,
2142 .help = "display current target's ETM status",
2143 },
2144 {
2145 .name = "start",
2146 .handler = &handle_etm_start_command,
2147 .mode = COMMAND_EXEC,
2148 .help = "start ETM trace collection",
2149 },
2150 {
2151 .name = "stop",
2152 .handler = &handle_etm_stop_command,
2153 .mode = COMMAND_EXEC,
2154 .help = "stop ETM trace collection",
2155 },
2156 {
2157 .name = "analyze",
2158 .handler = &handle_etm_analyze_command,
2159 .mode = COMMAND_EXEC,
2160 .help = "anaylze collected ETM trace",
2161 },
2162 {
2163 .name = "image",
2164 .handler = &handle_etm_image_command,
2165 .mode = COMMAND_EXEC,
2166 .help = "load image from <file> [base address]",
2167 },
2168 {
2169 .name = "dump",
2170 .handler = &handle_etm_dump_command,
2171 .mode = COMMAND_EXEC,
2172 .help = "dump captured trace data <file>",
2173 },
2174 {
2175 .name = "load",
2176 .handler = &handle_etm_load_command,
2177 .mode = COMMAND_EXEC,
2178 .help = "load trace data for analysis <file>",
2179 },
2180 COMMAND_REGISTRATION_DONE
2181 };
2182
2183 static int etm_register_user_commands(struct command_context *cmd_ctx)
2184 {
2185 struct command *etm_cmd = command_find_in_context(cmd_ctx, "etm");
2186 return register_commands(cmd_ctx, etm_cmd, etm_exec_command_handlers);
2187 }
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)