target: Add 64-bit target address support
[openocd.git] / src / target / mips32.h
1 /***************************************************************************
2 * Copyright (C) 2008 by Spencer Oliver *
3 * spen@spen-soft.co.uk *
4 * *
5 * Copyright (C) 2008 by David T.L. Wong *
6 * *
7 * Copyright (C) 2011 by Drasko DRASKOVIC *
8 * drasko.draskovic@gmail.com *
9 * *
10 * This program is free software; you can redistribute it and/or modify *
11 * it under the terms of the GNU General Public License as published by *
12 * the Free Software Foundation; either version 2 of the License, or *
13 * (at your option) any later version. *
14 * *
15 * This program is distributed in the hope that it will be useful, *
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
18 * GNU General Public License for more details. *
19 * *
20 * You should have received a copy of the GNU General Public License *
21 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
22 ***************************************************************************/
23
24 #ifndef OPENOCD_TARGET_MIPS32_H
25 #define OPENOCD_TARGET_MIPS32_H
26
27 #include "target.h"
28 #include "mips32_pracc.h"
29
30 #define MIPS32_COMMON_MAGIC 0xB320B320
31
32 /**
33 * Memory segments (32bit kernel mode addresses)
34 * These are the traditional names used in the 32-bit universe.
35 */
36 #define KUSEG 0x00000000
37 #define KSEG0 0x80000000
38 #define KSEG1 0xa0000000
39 #define KSEG2 0xc0000000
40 #define KSEG3 0xe0000000
41
42 /** Returns the kernel segment base of a given address */
43 #define KSEGX(a) ((a) & 0xe0000000)
44
45 /** CP0 CONFIG regites fields */
46 #define MIPS32_CONFIG0_KU_SHIFT 25
47 #define MIPS32_CONFIG0_KU_MASK (0x7 << MIPS32_CONFIG0_KU_SHIFT)
48
49 #define MIPS32_CONFIG0_K0_SHIFT 0
50 #define MIPS32_CONFIG0_K0_MASK (0x7 << MIPS32_CONFIG0_K0_SHIFT)
51
52 #define MIPS32_CONFIG0_K23_SHIFT 28
53 #define MIPS32_CONFIG0_K23_MASK (0x7 << MIPS32_CONFIG0_K23_SHIFT)
54
55 #define MIPS32_CONFIG0_AR_SHIFT 10
56 #define MIPS32_CONFIG0_AR_MASK (0x7 << MIPS32_CONFIG0_AR_SHIFT)
57
58 #define MIPS32_CONFIG1_DL_SHIFT 10
59 #define MIPS32_CONFIG1_DL_MASK (0x7 << MIPS32_CONFIG1_DL_SHIFT)
60
61 #define MIPS32_ARCH_REL1 0x0
62 #define MIPS32_ARCH_REL2 0x1
63
64 #define MIPS32_SCAN_DELAY_LEGACY_MODE 2000000
65
66 /* offsets into mips32 core register cache */
67 enum {
68 MIPS32_PC = 37,
69 MIPS32_FIR = 71,
70 MIPS32NUMCOREREGS
71 };
72
73 enum mips32_isa_mode {
74 MIPS32_ISA_MIPS32 = 0,
75 MIPS32_ISA_MIPS16E = 1,
76 };
77
78 struct mips32_comparator {
79 int used;
80 uint32_t bp_value;
81 uint32_t reg_address;
82 };
83
84 struct mips32_common {
85 uint32_t common_magic;
86 void *arch_info;
87 struct reg_cache *core_cache;
88 struct mips_ejtag ejtag_info;
89 uint32_t core_regs[MIPS32NUMCOREREGS];
90 enum mips32_isa_mode isa_mode;
91
92 /* working area for fastdata access */
93 struct working_area *fast_data_area;
94
95 int bp_scanned;
96 int num_inst_bpoints;
97 int num_data_bpoints;
98 int num_inst_bpoints_avail;
99 int num_data_bpoints_avail;
100 struct mips32_comparator *inst_break_list;
101 struct mips32_comparator *data_break_list;
102
103 /* register cache to processor synchronization */
104 int (*read_core_reg)(struct target *target, unsigned int num);
105 int (*write_core_reg)(struct target *target, unsigned int num);
106 };
107
108 static inline struct mips32_common *
109 target_to_mips32(struct target *target)
110 {
111 return target->arch_info;
112 }
113
114 struct mips32_core_reg {
115 uint32_t num;
116 struct target *target;
117 struct mips32_common *mips32_common;
118 };
119
120 struct mips32_algorithm {
121 int common_magic;
122 enum mips32_isa_mode isa_mode;
123 };
124
125 #define MIPS32_OP_ADDIU 0x21
126 #define MIPS32_OP_ANDI 0x0C
127 #define MIPS32_OP_BEQ 0x04
128 #define MIPS32_OP_BGTZ 0x07
129 #define MIPS32_OP_BNE 0x05
130 #define MIPS32_OP_ADDI 0x08
131 #define MIPS32_OP_AND 0x24
132 #define MIPS32_OP_CACHE 0x2F
133 #define MIPS32_OP_COP0 0x10
134 #define MIPS32_OP_J 0x02
135 #define MIPS32_OP_JR 0x08
136 #define MIPS32_OP_LUI 0x0F
137 #define MIPS32_OP_LW 0x23
138 #define MIPS32_OP_LBU 0x24
139 #define MIPS32_OP_LHU 0x25
140 #define MIPS32_OP_MFHI 0x10
141 #define MIPS32_OP_MTHI 0x11
142 #define MIPS32_OP_MFLO 0x12
143 #define MIPS32_OP_MTLO 0x13
144 #define MIPS32_OP_RDHWR 0x3B
145 #define MIPS32_OP_SB 0x28
146 #define MIPS32_OP_SH 0x29
147 #define MIPS32_OP_SW 0x2B
148 #define MIPS32_OP_ORI 0x0D
149 #define MIPS32_OP_XORI 0x0E
150 #define MIPS32_OP_XOR 0x26
151 #define MIPS32_OP_SLTU 0x2B
152 #define MIPS32_OP_SRL 0x03
153 #define MIPS32_OP_SYNCI 0x1F
154
155 #define MIPS32_OP_REGIMM 0x01
156 #define MIPS32_OP_SDBBP 0x3F
157 #define MIPS32_OP_SPECIAL 0x00
158 #define MIPS32_OP_SPECIAL2 0x07
159 #define MIPS32_OP_SPECIAL3 0x1F
160
161 #define MIPS32_COP0_MF 0x00
162 #define MIPS32_COP0_MT 0x04
163
164 #define MIPS32_R_INST(opcode, rs, rt, rd, shamt, funct) \
165 (((opcode) << 26) | ((rs) << 21) | ((rt) << 16) | ((rd) << 11) | ((shamt) << 6) | (funct))
166 #define MIPS32_I_INST(opcode, rs, rt, immd) \
167 (((opcode) << 26) | ((rs) << 21) | ((rt) << 16) | (immd))
168 #define MIPS32_J_INST(opcode, addr) (((opcode) << 26) | (addr))
169
170 #define MIPS32_NOP 0
171 #define MIPS32_ADDI(tar, src, val) MIPS32_I_INST(MIPS32_OP_ADDI, src, tar, val)
172 #define MIPS32_ADDU(dst, src, tar) MIPS32_R_INST(MIPS32_OP_SPECIAL, src, tar, dst, 0, MIPS32_OP_ADDIU)
173 #define MIPS32_AND(reg, off, val) MIPS32_R_INST(0, off, val, reg, 0, MIPS32_OP_AND)
174 #define MIPS32_ANDI(tar, src, val) MIPS32_I_INST(MIPS32_OP_ANDI, src, tar, val)
175 #define MIPS32_B(off) MIPS32_BEQ(0, 0, off)
176 #define MIPS32_BEQ(src, tar, off) MIPS32_I_INST(MIPS32_OP_BEQ, src, tar, off)
177 #define MIPS32_BGTZ(reg, off) MIPS32_I_INST(MIPS32_OP_BGTZ, reg, 0, off)
178 #define MIPS32_BNE(src, tar, off) MIPS32_I_INST(MIPS32_OP_BNE, src, tar, off)
179 #define MIPS32_CACHE(op, off, base) MIPS32_I_INST(MIPS32_OP_CACHE, base, op, off)
180 #define MIPS32_J(tar) MIPS32_J_INST(MIPS32_OP_J, tar)
181 #define MIPS32_JR(reg) MIPS32_R_INST(0, reg, 0, 0, 0, MIPS32_OP_JR)
182 #define MIPS32_MFC0(gpr, cpr, sel) MIPS32_R_INST(MIPS32_OP_COP0, MIPS32_COP0_MF, gpr, cpr, 0, sel)
183 #define MIPS32_MTC0(gpr, cpr, sel) MIPS32_R_INST(MIPS32_OP_COP0, MIPS32_COP0_MT, gpr, cpr, 0, sel)
184 #define MIPS32_LBU(reg, off, base) MIPS32_I_INST(MIPS32_OP_LBU, base, reg, off)
185 #define MIPS32_LHU(reg, off, base) MIPS32_I_INST(MIPS32_OP_LHU, base, reg, off)
186 #define MIPS32_LUI(reg, val) MIPS32_I_INST(MIPS32_OP_LUI, 0, reg, val)
187 #define MIPS32_LW(reg, off, base) MIPS32_I_INST(MIPS32_OP_LW, base, reg, off)
188 #define MIPS32_MFLO(reg) MIPS32_R_INST(0, 0, 0, reg, 0, MIPS32_OP_MFLO)
189 #define MIPS32_MFHI(reg) MIPS32_R_INST(0, 0, 0, reg, 0, MIPS32_OP_MFHI)
190 #define MIPS32_MTLO(reg) MIPS32_R_INST(0, reg, 0, 0, 0, MIPS32_OP_MTLO)
191 #define MIPS32_MTHI(reg) MIPS32_R_INST(0, reg, 0, 0, 0, MIPS32_OP_MTHI)
192 #define MIPS32_ORI(tar, src, val) MIPS32_I_INST(MIPS32_OP_ORI, src, tar, val)
193 #define MIPS32_XORI(tar, src, val) MIPS32_I_INST(MIPS32_OP_XORI, src, tar, val)
194 #define MIPS32_RDHWR(tar, dst) MIPS32_R_INST(MIPS32_OP_SPECIAL3, 0, tar, dst, 0, MIPS32_OP_RDHWR)
195 #define MIPS32_SB(reg, off, base) MIPS32_I_INST(MIPS32_OP_SB, base, reg, off)
196 #define MIPS32_SH(reg, off, base) MIPS32_I_INST(MIPS32_OP_SH, base, reg, off)
197 #define MIPS32_SW(reg, off, base) MIPS32_I_INST(MIPS32_OP_SW, base, reg, off)
198 #define MIPS32_XOR(reg, val1, val2) MIPS32_R_INST(0, val1, val2, reg, 0, MIPS32_OP_XOR)
199 #define MIPS32_SRL(reg, src, off) MIPS32_R_INST(0, 0, src, reg, off, MIPS32_OP_SRL)
200 #define MIPS32_SLTU(dst, src, tar) MIPS32_R_INST(MIPS32_OP_SPECIAL, src, tar, dst, 0, MIPS32_OP_SLTU)
201 #define MIPS32_SYNCI(off, base) MIPS32_I_INST(MIPS32_OP_REGIMM, base, MIPS32_OP_SYNCI, off)
202
203 #define MIPS32_SYNC 0xF
204 #define MIPS32_SYNCI_STEP 0x1 /* reg num od address step size to be used with synci instruction */
205
206 /**
207 * Cache operations definitions
208 * Operation field is 5 bits long :
209 * 1) bits 1..0 hold cache type
210 * 2) bits 4..2 hold operation code
211 */
212 #define MIPS32_CACHE_D_HIT_WRITEBACK ((0x1 << 0) | (0x6 << 2))
213 #define MIPS32_CACHE_I_HIT_INVALIDATE ((0x0 << 0) | (0x4 << 2))
214
215 /* ejtag specific instructions */
216 #define MIPS32_DRET 0x4200001F
217 #define MIPS32_SDBBP 0x7000003F /* MIPS32_J_INST(MIPS32_OP_SPECIAL2, MIPS32_OP_SDBBP) */
218 #define MIPS16_SDBBP 0xE801
219
220 extern const struct command_registration mips32_command_handlers[];
221
222 int mips32_arch_state(struct target *target);
223
224 int mips32_init_arch_info(struct target *target,
225 struct mips32_common *mips32, struct jtag_tap *tap);
226
227 int mips32_restore_context(struct target *target);
228 int mips32_save_context(struct target *target);
229
230 struct reg_cache *mips32_build_reg_cache(struct target *target);
231
232 int mips32_run_algorithm(struct target *target,
233 int num_mem_params, struct mem_param *mem_params,
234 int num_reg_params, struct reg_param *reg_params,
235 target_addr_t entry_point, target_addr_t exit_point,
236 int timeout_ms, void *arch_info);
237
238 int mips32_configure_break_unit(struct target *target);
239
240 int mips32_enable_interrupts(struct target *target, int enable);
241
242 int mips32_examine(struct target *target);
243
244 int mips32_register_commands(struct command_context *cmd_ctx);
245
246 int mips32_get_gdb_reg_list(struct target *target,
247 struct reg **reg_list[], int *reg_list_size,
248 enum target_register_class reg_class);
249 int mips32_checksum_memory(struct target *target, target_addr_t address,
250 uint32_t count, uint32_t *checksum);
251 int mips32_blank_check_memory(struct target *target,
252 target_addr_t address, uint32_t count, uint32_t *blank, uint8_t erased_value);
253
254 #endif /* OPENOCD_TARGET_MIPS32_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)