mips32.c: cache debug caps and support EJTAG 2.0 specific changes
[openocd.git] / src / target / mips_ejtag.h
1 /***************************************************************************
2 * Copyright (C) 2008 by Spencer Oliver *
3 * spen@spen-soft.co.uk *
4 * *
5 * Copyright (C) 2008 by David T.L. Wong *
6 * *
7 * This program is free software; you can redistribute it and/or modify *
8 * it under the terms of the GNU General Public License as published by *
9 * the Free Software Foundation; either version 2 of the License, or *
10 * (at your option) any later version. *
11 * *
12 * This program is distributed in the hope that it will be useful, *
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
15 * GNU General Public License for more details. *
16 * *
17 * You should have received a copy of the GNU General Public License *
18 * along with this program; if not, write to the *
19 * Free Software Foundation, Inc., *
20 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
21 ***************************************************************************/
22
23 #ifndef MIPS_EJTAG
24 #define MIPS_EJTAG
25
26 #include <jtag/jtag.h>
27
28 /* tap instructions */
29 #define EJTAG_INST_IDCODE 0x01
30 #define EJTAG_INST_IMPCODE 0x03
31 #define EJTAG_INST_ADDRESS 0x08
32 #define EJTAG_INST_DATA 0x09
33 #define EJTAG_INST_CONTROL 0x0A
34 #define EJTAG_INST_ALL 0x0B
35 #define EJTAG_INST_EJTAGBOOT 0x0C
36 #define EJTAG_INST_NORMALBOOT 0x0D
37 #define EJTAG_INST_FASTDATA 0x0E
38 #define EJTAG_INST_TCBCONTROLA 0x10
39 #define EJTAG_INST_TCBCONTROLB 0x11
40 #define EJTAG_INST_TCBDATA 0x12
41 #define EJTAG_INST_BYPASS 0xFF
42
43 /* microchip PIC32MX specific instructions */
44 #define MTAP_SW_MTAP 0x04
45 #define MTAP_SW_ETAP 0x05
46 #define MTAP_COMMAND 0x07
47
48 /* microchip specific cmds */
49 #define MCHP_ASERT_RST 0xd1
50 #define MCHP_DE_ASSERT_RST 0xd0
51 #define MCHP_ERASE 0xfc
52 #define MCHP_STATUS 0x00
53
54 /* ejtag control register bits ECR */
55 #define EJTAG_CTRL_TOF (1 << 1)
56 #define EJTAG_CTRL_TIF (1 << 2)
57 #define EJTAG_CTRL_BRKST (1 << 3)
58 #define EJTAG_CTRL_DLOCK (1 << 5)
59 #define EJTAG_CTRL_DRWN (1 << 9)
60 #define EJTAG_CTRL_DERR (1 << 10)
61 #define EJTAG_CTRL_DSTRT (1 << 11)
62 #define EJTAG_CTRL_JTAGBRK (1 << 12)
63 #define EJTAG_CTRL_SETDEV (1 << 14)
64 #define EJTAG_CTRL_PROBEN (1 << 15)
65 #define EJTAG_CTRL_PRRST (1 << 16)
66 #define EJTAG_CTRL_DMAACC (1 << 17)
67 #define EJTAG_CTRL_PRACC (1 << 18)
68 #define EJTAG_CTRL_PRNW (1 << 19)
69 #define EJTAG_CTRL_PERRST (1 << 20)
70 #define EJTAG_CTRL_SYNC (1 << 23)
71 #define EJTAG_CTRL_DNM (1 << 28)
72 #define EJTAG_CTRL_ROCC (1 << 31)
73
74 /* Debug Register (CP0 Register 23, Select 0) */
75
76 #define EJTAG_DEBUG_DSS (1 << 0)
77 #define EJTAG_DEBUG_DBP (1 << 1)
78 #define EJTAG_DEBUG_DDBL (1 << 2)
79 #define EJTAG_DEBUG_DDBS (1 << 3)
80 #define EJTAG_DEBUG_DIB (1 << 4)
81 #define EJTAG_DEBUG_DINT (1 << 5)
82 #define EJTAG_DEBUG_OFFLINE (1 << 7)
83 #define EJTAG_DEBUG_SST (1 << 8)
84 #define EJTAG_DEBUG_NOSST (1 << 9)
85 #define EJTAG_DEBUG_DDBLIMPR (1 << 18)
86 #define EJTAG_DEBUG_DDBSIMPR (1 << 19)
87 #define EJTAG_DEBUG_IEXI (1 << 20)
88 #define EJTAG_DEBUG_DBUSEP (1 << 21)
89 #define EJTAG_DEBUG_CACHEEP (1 << 22)
90 #define EJTAG_DEBUG_MCHECKP (1 << 23)
91 #define EJTAG_DEBUG_IBUSEP (1 << 24)
92 #define EJTAG_DEBUG_COUNTDM (1 << 25)
93 #define EJTAG_DEBUG_HALT (1 << 26)
94 #define EJTAG_DEBUG_DOZE (1 << 27)
95 #define EJTAG_DEBUG_LSNM (1 << 28)
96 #define EJTAG_DEBUG_NODCR (1 << 29)
97 #define EJTAG_DEBUG_DM (1 << 30)
98 #define EJTAG_DEBUG_DBD (1 << 31)
99
100 /* implementation MIPS register bits.
101 * Bits marked with V20 or v2.0 mean that, this registers supported only
102 * by EJTAG v2.0. Bits marked with Lexra or BMIPS are different from the
103 * official EJATG.
104 * NOTE: Lexra or BMIPS use EJTAG v2.0 */
105
106 #define EJTAG_IMP_HAS(x) (ejtag_info->impcode & (x))
107 /* v2.0(Lexra) 29 - 1’b1 - Lexra Internal Trace Buffer implemented. This bit
108 * overlaps with version bit of MIPS EJTAG specification. */
109 #define EJTAG_V26_IMP_R3K (1 << 28)
110 /* v2.0 - 24:25 - 2’b00- No profiling support */
111 #define EJTAG_V26_IMP_DINT (1 << 24)
112 #define EJTAG_V20_IMP_SDBBP (1 << 23) /* 1’b1 - sdbbp is Special2 Opcode */
113 #define EJTAG_IMP_ASID8 (1 << 22)
114 #define EJTAG_IMP_ASID6 (1 << 21)
115 #define EJTAG_V20_IMP_COMPLEX_BREAK (1 << 20) /* Complex Breaks supported*/
116 #define EJTAG_V20_IMP_EADDR_NO32BIT (1 << 19) /* EJTAG_ADDR > 32 bits wide */
117 #define EJTAG_V20_IMP_DCACHE_COH (1 << 18) /* DCache does keep DMA coherent */
118 #define EJTAG_V20_IMP_ICACHE_COH (1 << 17) /* DCache does keep DMA coherent */
119 #define EJTAG_IMP_MIPS16 (1 << 16)
120 #define EJTAG_IMP_NODMA (1 << 14)
121 /* v2.0 - 11:13 external PC trace. Trace PC Width. */
122 /* v2.0 - 8:10 external PC trace. PCST Width and DCLK Division Factor */
123 #define EJTAG_V20_IMP_NOPB (1 << 7) /* no processor breaks */
124 #define EJTAG_V20_IMP_NODB (1 << 6) /* no data breaks */
125 #define EJTAG_V20_IMP_NOIB (1 << 5) /* no instruction breaks implemented */
126 /* v2.0 - 1:4 Number of Break Channels. */
127 #define EJTAG_V20_IMP_BCHANNELS_MASK 0xf
128 #define EJTAG_V20_IMP_BCHANNELS_SHIFT 1
129 #define EJTAG_DCR_MIPS64 (1 << 0)
130
131 /* Debug Control Register DCR */
132 #define EJTAG_DCR 0xFF300000
133 #define EJTAG_DCR_ENM (1 << 29)
134 #define EJTAG_DCR_DB (1 << 17)
135 #define EJTAG_DCR_IB (1 << 16)
136 #define EJTAG_DCR_INTE (1 << 4)
137 #define EJTAG_DCR_MP (1 << 2)
138
139 /* breakpoint support */
140 /* EJTAG_V20_* was tested on Broadcom BCM7401
141 * and may or will differ with other hardware. For example EZ4021-FC. */
142 #define EJTAG_V20_IBS 0xFF300004
143 #define EJTAG_V20_IBA0 0xFF300100
144 #define EJTAG_V20_IBC_OFFS 0x4 /* IBC Offset */
145 #define EJTAG_V20_IBM_OFFS 0x8
146 #define EJTAG_V20_IBAn_STEP 0x10 /* Offset for next channel */
147 #define EJTAG_V20_DBS 0xFF30008
148 #define EJTAG_V20_DBA0 0xFF300200
149 #define EJTAG_V20_DBC_OFFS 0x4
150 #define EJTAG_V20_DBM_OFFS 0x8
151 #define EJTAG_V20_DBV_OFFS 0xc
152 #define EJTAG_V20_DBAn_STEP 0x10
153
154 #define EJTAG_V25_IBS 0xFF301000
155 #define EJTAG_V25_IBA0 0xFF301100
156 #define EJTAG_V25_IBM_OFFS 0x8
157 #define EJTAG_V25_IBASID_OFFS 0x10
158 #define EJTAG_V25_IBC_OFFS 0x18
159 #define EJTAG_V25_IBAn_STEP 0x100
160 #define EJTAG_V25_DBS 0xFF302000
161 #define EJTAG_V25_DBA0 0xFF302100
162 #define EJTAG_V25_DBM_OFFS 0x8
163 #define EJTAG_V25_DBASID_OFFS 0x10
164 #define EJTAG_V25_DBC_OFFS 0x18
165 #define EJTAG_V25_DBV_OFFS 0x20
166 #define EJTAG_V25_DBAn_STEP 0x100
167
168 #define EJTAG_DBCn_NOSB (1 << 13)
169 #define EJTAG_DBCn_NOLB (1 << 12)
170 #define EJTAG_DBCn_BLM_MASK 0xff
171 #define EJTAG_DBCn_BLM_SHIFT 4
172 #define EJTAG_DBCn_BE (1 << 0)
173
174 #define EJTAG_VERSION_20 0
175 #define EJTAG_VERSION_25 1
176 #define EJTAG_VERSION_26 2
177 #define EJTAG_VERSION_31 3
178 #define EJTAG_VERSION_41 4
179 #define EJTAG_VERSION_51 5
180
181 struct mips_ejtag {
182 struct jtag_tap *tap;
183 uint32_t impcode;
184 uint32_t idcode;
185 uint32_t ejtag_ctrl;
186 int fast_access_save;
187 uint32_t reg8;
188 uint32_t reg9;
189 unsigned scan_delay;
190 int mode;
191 uint32_t pa_ctrl;
192 uint32_t pa_addr;
193 unsigned int ejtag_version;
194
195 /* Memory-Mapped Registers. This addresses are not same on different
196 * EJTAG versions. */
197 uint32_t debug_caps;
198 uint32_t ejtag_ibs_addr; /* Instruction Address Break Status */
199 uint32_t ejtag_iba0_addr; /* IAB channel 0 */
200 uint32_t ejtag_ibc_offs; /* IAB Control offset */
201 uint32_t ejtag_ibm_offs; /* IAB Mask offset */
202 uint32_t ejtag_ibasid_offs; /* IAB ASID (4Kc) */
203
204 uint32_t ejtag_dbs_addr; /* Data Address Break Status Register */
205 uint32_t ejtag_dba0_addr; /* DAB channel 0 */
206 uint32_t ejtag_dbc_offs; /* DAB Control offset */
207 uint32_t ejtag_dbm_offs; /* DAB Mask offset */
208 uint32_t ejtag_dbv_offs; /* DAB Value offset */
209 uint32_t ejtag_dbasid_offs; /* DAB ASID (4Kc) */
210
211 uint32_t ejtag_iba_step_size;
212 uint32_t ejtag_dba_step_size; /* size of step till next *DBAn register. */
213 };
214
215 void mips_ejtag_set_instr(struct mips_ejtag *ejtag_info,
216 int new_instr);
217 int mips_ejtag_enter_debug(struct mips_ejtag *ejtag_info);
218 int mips_ejtag_exit_debug(struct mips_ejtag *ejtag_info);
219 int mips_ejtag_get_idcode(struct mips_ejtag *ejtag_info, uint32_t *idcode);
220 void mips_ejtag_add_scan_96(struct mips_ejtag *ejtag_info,
221 uint32_t ctrl, uint32_t data, uint8_t *in_scan_buf);
222 void mips_ejtag_drscan_32_out(struct mips_ejtag *ejtag_info, uint32_t data);
223 int mips_ejtag_drscan_32(struct mips_ejtag *ejtag_info, uint32_t *data);
224 void mips_ejtag_drscan_8_out(struct mips_ejtag *ejtag_info, uint8_t data);
225 int mips_ejtag_drscan_8(struct mips_ejtag *ejtag_info, uint32_t *data);
226 int mips_ejtag_fastdata_scan(struct mips_ejtag *ejtag_info, int write_t, uint32_t *data);
227
228 int mips_ejtag_init(struct mips_ejtag *ejtag_info);
229 int mips_ejtag_config_step(struct mips_ejtag *ejtag_info, int enable_step);
230
231 static inline void mips_le_to_h_u32(jtag_callback_data_t arg)
232 {
233 uint8_t *in = (uint8_t *)arg;
234 *((uint32_t *)arg) = le_to_h_u32(in);
235 }
236
237 #endif /* MIPS_EJTAG */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)