src/target/target/lpc2148.cfg

   1 #delays on reset lines
   2 jtag_nsrst_delay 200
   3 jtag_ntrst_delay 200
   4
   5 # NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate
   6 # JTAG, power-on reset is not enough, i.e. you need to perform a
   7 # reset before being able to talk to the LPC2148, attach is not
   8 # possible.
   9
  10 #use combined on interfaces or targets that can't set TRST/SRST separately
  11 reset_config trst_and_srst srst_pulls_trst
  12
  13 #jtag scan chain
  14 jtag_device 4 0x1 0xf 0xe
  15
  16 target arm7tdmi little 0 arm7tdmi-s_r4
  17 [new_target_name] configure -event old-post_reset {} {
  18         # Force target into ARM state
  19         soft_reset_halt
  20         #do not remap 0x0000-0x0020 to anything but the flash
  21         mwb 0xE01FC040 0x01
  22
  23 }
  24
  25 working_area 0 0x40000000 0x4000 nobackup
  26
  27 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
  28 flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765