src/target/target/pxa270.cfg

   1 #Marvell/Intel PXA270 Script
   2 # set jtag_nsrst_delay to the delay introduced by your reset circuit
   3 # the rest of the needed delays are built into the openocd program
   4 jtag_nsrst_delay 260
   5 # set the jtag_ntrst_delay to the delay introduced by a reset circuit
   6 # the rest of the needed delays are built into the openocd program
   7 jtag_ntrst_delay 0
   8 #use combined on interfaces or targets that can\92t set TRST/SRST separately
   9 reset_config trst_and_srst separate
  10 #jtag scan chain
  11 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
  12 jtag_device 7 0x1 0x7f 0x7e
  13 target xscale little 0 pxa27x
  14 # maps to PXA internal RAM. If you are using a PXA255
  15 # you must initialize SDRAM or leave this option off
  16 working_area 0 0x5c000000 0x10000 nobackup
  17
  18 #flash bank <driver> <base> <size> <chip_width> <bus_width>
  19 # works for P30 flash
  20 flash bank cfi 0x00000000 0x1000000 2 4 0