src/target/target/str910-eval.cfg

   1 # str910-eval eval board
   2 #
   3 # Need reset scripts
   4 reset_config trst_and_srst
   5
   6 if { [info exists CHIPNAME] } {
   7    set  _CHIPNAME $CHIPNAME
   8 } else {
   9    set  _CHIPNAME str912
  10 }
  11
  12 if { [info exists ENDIAN] } {
  13    set  _ENDIAN $ENDIAN
  14 } else {
  15    set  _ENDIAN little
  16 }
  17
  18 if { [info exists FLASHTAPID ] } {
  19    set _FLASHTAPID $FLASHTAPID
  20 } else {
  21   # Fixme with a correct number!
  22    set _FLASHTAPID 0xFFFFFFFF
  23 }
  24 jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0xfe -expected-id $_FLASHTAPID
  25
  26
  27 if { [info exists CPUTAPID ] } {
  28    set _CPUTAPID $CPUTAPID
  29 } else {
  30    set _CPUTAPID 0x25966041
  31 }
  32 jtag newtap $_CHIPNAME cpu   -irlen 4 -ircapture 0x1 -irmask 0xe -expected-id $_CPUTAPID
  33
  34 if { [info exists BSTAPID ] } {
  35    set _BSTAPID $BSTAPID
  36 } else {
  37    set _BSTAPID 0xFFFFFFFF
  38 }
  39 jtag newtap $_CHIPNAME bs    -irlen 5 -ircapture 0x1 -irmask 0x1e -expected-id $_BSTAPID
  40
  41 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
  42 target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
  43 $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-virt 0x50000000 -work-area-size 16384 -work-area-backup 1
  44
  45 flash bank str9xpec 0x00000000 0x00080000 0 0 0
  46
  47 str9xpec enable_turbo 0
  48 str9xpec options_read 0
  49 str9xpec options_cmap 0 bank 1
  50 str9xpec options_write 0