tcl/target/aducm360.cfg

   1 # SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 #
   4 # This file was created using as references the stm32f1x.cfg and aduc702x.cfg
   5 #
   6 source [find target/swj-dp.tcl]
   7
   8 # Chip name
   9 if { [info exists CHIPNAME] } {
  10    set _CHIPNAME $CHIPNAME
  11 } else {
  12    set _CHIPNAME aducm360
  13 }
  14
  15 # Endianness
  16 if { [info exists ENDIAN] } {
  17    set _ENDIAN $ENDIAN
  18 } else {
  19    set _ENDIAN little
  20 }
  21
  22 # Work-area is a space in RAM used for flash programming
  23 # Eventually, the whole SRAM of ADuCM360 will be used (8kB)
  24 if { [info exists WORKAREASIZE] } {
  25    set _WORKAREASIZE $WORKAREASIZE
  26 } else {
  27    set _WORKAREASIZE 0x2000
  28 }
  29
  30 #jtag scan chain
  31 if { [info exists CPUTAPID] } {
  32    set _CPUTAPID $CPUTAPID
  33 } else {
  34    set _CPUTAPID 0x2ba01477
  35 }
  36
  37 swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
  38 dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
  39
  40 # SWD/JTAG speed
  41 adapter speed 1000
  42
  43 ##
  44 ## Target configuration
  45 ##
  46 set _TARGETNAME $_CHIPNAME.cpu
  47 target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
  48
  49 # allocate the working area
  50 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
  51
  52 # flash size will be probed
  53 set _FLASHNAME $_CHIPNAME.flash
  54 flash bank $_FLASHNAME aducm360 0x00 0 0 0 $_TARGETNAME
  55
  56 adapter srst delay 100
  57
  58 cortex_m reset_config sysresetreq