tcl/target/imx25.cfg

   1 #
   2 # imx25 config
   3 #
   4
   5 if { [info exists CHIPNAME] } {
   6    set _CHIPNAME $CHIPNAME
   7 } else {
   8    set _CHIPNAME imx25
   9 }
  10
  11 if { [info exists ENDIAN] } {
  12    set _ENDIAN $ENDIAN
  13 } else {
  14    set _ENDIAN little
  15 }
  16
  17 if { [info exists ETBTAPID] } {
  18    set _ETBTAPID $ETBTAPID
  19 } else {
  20    set _ETBTAPID 0x1b900f0f
  21 }
  22 jtag newtap $_CHIPNAME etb -irlen 4 -irmask 0x0f -expected-id $_ETBTAPID
  23
  24 if { [info exists CPUTAPID] } {
  25    set _CPUTAPID $CPUTAPID
  26 } else {
  27    set _CPUTAPID 0x07926041
  28 }
  29 jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
  30
  31 jtag newtap $_CHIPNAME whatchacallit -irlen 4 -ircapture 0x0 -irmask 0x0 -expected-id 0x0
  32
  33 if { [info exists SDMATAPID] } {
  34    set _SDMATAPID $SDMATAPID
  35 } else {
  36    set _SDMATAPID 0x0882301d
  37 }
  38 jtag newtap $_CHIPNAME sdma -irlen 5 -expected-id $_SDMATAPID
  39
  40 set _TARGETNAME $_CHIPNAME.cpu
  41 target create $_TARGETNAME arm926ejs -endian $_ENDIAN \
  42                 -chain-position $_TARGETNAME
  43
  44 # trace setup
  45 etm config $_TARGETNAME 16 normal full etb
  46 etb config $_TARGETNAME $_CHIPNAME.etb