Allow transports to override the selected target (hla configs unification)

[openocd.git] / tcl / target / lpc1850.cfg

source [find target/swj-dp.tcl]

adapter_khz 500

if { [info exists CHIPNAME] } {
        set _CHIPNAME $CHIPNAME
} else {
        set _CHIPNAME lpc1850
}

if { [info exists ENDIAN] } {
   set _ENDIAN $ENDIAN
} else {
   set _ENDIAN little
}
#
# M3 JTAG mode TAP
#
if { [info exists M3_JTAG_TAPID] } {
   set _M3_JTAG_TAPID $M3_JTAG_TAPID
} else {
   set _M3_JTAG_TAPID 0x4ba00477
}

swj_newdap $_CHIPNAME m3 -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_M3_JTAG_TAPID

set _TARGETNAME $_CHIPNAME.m3
target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME

if {![using_hla]} {
   # if srst is not fitted use SYSRESETREQ to
   # perform a soft reset
   cortex_m reset_config sysresetreq
}