tcl/target/lpc2124.cfg

   1 # NXP LPC2124 ARM7TDMI-S with 256kB flash and 16kB SRAM, clocked with 12MHz crystal
   2
   3 source [find target/lpc2xxx.cfg]
   4
   5 # parameters:
   6 # - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
   7 # - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
   8
   9 proc setup_lpc2124 {core_freq_khz adapter_freq_khz} {
  10         # 256kB flash and 16kB SRAM
  11         # setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
  12         setup_lpc2xxx lpc2124 0x4f1f0f0f 0x40000 lpc2000_v1 0x4000 $core_freq_khz $adapter_freq_khz
  13 }
  14
  15 proc init_targets {} {
  16         # default to core clocked with 12MHz crystal
  17         echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different."
  18
  19         # setup_lpc2124 <core_freq_khz> <adapter_freq_khz>
  20         setup_lpc2124 12000 1500
  21 }