tcl/target/lpc2294.cfg

   1 if { [info exists CHIPNAME] } {
   2    set  _CHIPNAME $CHIPNAME
   3 } else {
   4    set  _CHIPNAME lpc2294
   5 }
   6
   7 if { [info exists ENDIAN] } {
   8    set  _ENDIAN $ENDIAN
   9 } else {
  10    set  _ENDIAN little
  11 }
  12
  13 if { [info exists CPUTAPID ] } {
  14    set _CPUTAPID $CPUTAPID
  15 } else {
  16   # force an error till we get a good number
  17    set _CPUTAPID 0xffffffff
  18 }
  19
  20 jtag_nsrst_delay 200
  21 jtag_ntrst_delay 200
  22
  23 #use combined on interfaces or targets that can't set TRST/SRST separately
  24 reset_config trst_and_srst srst_pulls_trst
  25
  26 #jtag scan chain
  27 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
  28
  29 set _TARGETNAME $_CHIPNAME.cpu
  30 target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
  31 $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
  32
  33 #flash configuration
  34 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
  35 set _FLASHNAME $_CHIPNAME.flash
  36 flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum
  37
  38 # For more information about the configuration files, take a look at:
  39 # openocd.texi