tcl/target/lpc2294.cfg

   1 if { [info exists CHIPNAME] } {
   2    set  _CHIPNAME $CHIPNAME
   3 } else {
   4    set  _CHIPNAME lpc2294
   5 }
   6
   7 if { [info exists CPUTAPID ] } {
   8    set _CPUTAPID $CPUTAPID
   9 } else {
  10   # force an error till we get a good number
  11    set _CPUTAPID 0xffffffff
  12 }
  13
  14 adapter_nsrst_delay 200
  15 jtag_ntrst_delay 200
  16
  17 #use combined on interfaces or targets that can't set TRST/SRST separately
  18 reset_config trst_and_srst srst_pulls_trst
  19
  20 #jtag scan chain
  21 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
  22
  23 set _TARGETNAME $_CHIPNAME.cpu
  24 target create $_TARGETNAME arm7tdmi -chain-position $_TARGETNAME
  25 $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
  26
  27 #flash configuration
  28 # flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
  29 set _FLASHNAME $_CHIPNAME.flash
  30 flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum