tcl/target/max32625.cfg

   1 # SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 # Maxim Integrated MAX32625 OpenOCD target configuration file
   4 # www.maximintegrated.com
   5
   6 # adapter speed
   7 adapter speed 4000
   8
   9 # reset pin configuration
  10 reset_config srst_only
  11
  12 if {[using_jtag]} {
  13     jtag newtap max32625 cpu -irlen 4 -irmask 0xf -expected-id 0x4ba00477 -ignore-version
  14     jtag newtap maxtest tap -irlen 4 -irmask 0xf -ircapture 0x1 -expected-id 0x07f71197 -ignore-version
  15 } else {
  16     swd newdap max32625 cpu -irlen 4 -irmask 0xf -expected-id 0x2ba01477 -ignore-version
  17 }
  18
  19 dap create max32625.dap -chain-position max32625.cpu
  20
  21 # target configuration
  22 target create max32625.cpu cortex_m -dap max32625.dap
  23 max32625.cpu configure -work-area-phys 0x20005000 -work-area-size 0x2000
  24
  25 # Config Command: flash bank name driver base size chip_width bus_width target [driver_options]
  26 #   flash bank <name> max32xxx <base> <size> 0 0 <target> <flc base> <sector> <clk> <burst>
  27 #   max32625 flash base address   0x00000000
  28 #   max32625 flash size           0x80000 (512k)
  29 #   max32625 FLC base address     0x40002000
  30 #   max32625 sector (page) size   0x2000 (8kB)
  31 #   max32625 clock speed          96 (MHz)
  32 flash bank max32625.flash max32xxx 0x00000000 0x80000 0 0 max32625.cpu 0x40002000 0x2000 96