tcl/target/nrf52.cfg

   1 #
   2 # Nordic nRF52 series: ARM Cortex-M4 @ 64 MHz
   3 #
   4
   5 source [find target/swj-dp.tcl]
   6
   7 if { [info exists CHIPNAME] } {
   8         set _CHIPNAME $CHIPNAME
   9 } else {
  10         set _CHIPNAME nrf52
  11 }
  12
  13 # Work-area is a space in RAM used for flash programming
  14 # By default use 16kB
  15 if { [info exists WORKAREASIZE] } {
  16    set _WORKAREASIZE $WORKAREASIZE
  17 } else {
  18    set _WORKAREASIZE 0x4000
  19 }
  20
  21 if { [info exists CPUTAPID] } {
  22         set _CPUTAPID $CPUTAPID
  23 } else {
  24         set _CPUTAPID 0x2ba01477
  25 }
  26
  27 swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
  28
  29 set _TARGETNAME $_CHIPNAME.cpu
  30 target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
  31
  32 adapter_khz 1000
  33
  34 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
  35
  36 if { ![using_hla] } {
  37         cortex_m reset_config sysresetreq
  38 }
  39
  40 flash bank $_CHIPNAME.flash nrf5 0x00000000 0 1 1 $_TARGETNAME
  41 flash bank $_CHIPNAME.uicr nrf5 0x10001000 0 1 1 $_TARGETNAME