tcl/target/ti_msp432.cfg

   1 #
   2 # Texas Instruments MSP432 - ARM Cortex-M4F @ up to 48 MHz
   3 #
   4 # http://www.ti.com/MSP432
   5 #
   6
   7 if { [info exists CHIPNAME] } {
   8         set _CHIPNAME $CHIPNAME
   9 } else {
  10         set _CHIPNAME msp432
  11 }
  12
  13 if { [info exists CPUTAPID] } {
  14         set _DAP_TAPID $CPUTAPID
  15 } else {
  16         set _DAP_TAPID 0x4ba00477
  17 }
  18
  19 if { [info exists DAP_SWD_ID] } {
  20         set _DAP_SWD_ID $DAP_SWD_ID
  21 } else {
  22         set _DAP_SWD_ID 0x2ba01477
  23 }
  24
  25 source [find target/swj-dp.tcl]
  26
  27 if { [using_jtag] } {
  28         set _DAP_ID $_DAP_TAPID
  29 } else {
  30         set _DAP_ID $_DAP_SWD_ID
  31 }
  32
  33 swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_DAP_ID
  34 dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
  35
  36 set _TARGETNAME $_CHIPNAME.cpu
  37 target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
  38
  39 if { [info exists WORKAREASIZE] } {
  40         set _WORKAREASIZE $WORKAREASIZE
  41 } else {
  42         set _WORKAREASIZE 0x4000
  43 }
  44
  45 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
  46
  47 set _FLASHNAME $_CHIPNAME.flash
  48 flash bank $_FLASHNAME msp432 0 0 0 0 $_TARGETNAME
  49
  50 reset_config srst_only
  51 adapter_nsrst_delay 100