target/stm32xx: Endian is not configurable.

[openocd.git] / tcl / target / ti_tms570.cfg

adapter_khz 1500

if { [info exists CHIPNAME] } {
        set _CHIPNAME $CHIPNAME
} else {
        set _CHIPNAME tms570
}

if { [info exists ENDIAN] } {
        set _ENDIAN $ENDIAN
} else {
        set _ENDIAN big
}

# TMS570 has an ICEpick-C on which we need the router commands.
source [find target/icepick.cfg]

# Main DAP
if { [info exists DAP_TAPID] } {
        set _DAP_TAPID $DAP_TAPID
} else {
        set _DAP_TAPID 0x0B8A002F
}
jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable
jtag configure $_CHIPNAME.dap -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0"

# ICEpick-C (JTAG route controller)
if { [info exists JRC_TAPID] } {
        set _JRC_TAPID $JRC_TAPID
} else {
        set _JRC_TAPID 0x0B8A002F
}
jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \
        -expected-id $_JRC_TAPID -ignore-version
jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100"

# Cortex R4 target
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_r4 -endian $_ENDIAN \
        -chain-position $_CHIPNAME.dap -coreid 0 -dbgbase 0x00001003

# TMS570 uses quirky BE-32 mode
$_TARGETNAME dap ti_be_32_quirks 1

$_TARGETNAME configure -event gdb-attach {
        cortex_r4 dbginit
        halt
}

$_TARGETNAME configure -event "reset-assert" {
        global _CHIPNAME

        # assert warm system reset through ICEPick
        icepick_c_wreset $_CHIPNAME.jrc
}