testing/build.test2/README.txt

   1
   2 This makefile is how I Duane Ellis (openocd@duaneellis.com) builds
   3 openocd test purposes on Cygwin. I have included it here so others
   4 might also make use of the same configuration that I use to develop
   5 Openocd.
   6
   7 --Duane Ellis
   8
   9 To make use of it do the following:
  10
  11 (1)     Check out openocd in the standard way.
  12
  13 For example - in cygwin, type this:
  14
  15     bash$  mkdir -p /home/duane/test
  16     bash$  cd /home/duane/test
  17     bash$  svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
  18
  19 (2)     COPY this folder "right above" where you have OpenOCD.
  20
  21     bash$  cd /home/duane/test
  22     bash$  cp ./openocd/testing/build.test2/*   /home/duane/test/.
  23
  24 (3) OPTIONALLY
  25
  26     You might want to review the file "local.uses"
  27     Change options and so forth at the top of the file.
  28
  29 (4)     Initially, you need to download some additional files.
  30         These include "libftdi", "libconfuse", and the ftd2xx drivers.
  31
  32 (5)     You also need to build the supporting libraries and install them
  33         (They are installed "locally" only)
  34
  35         Type this command:
  36
  37     bash$ cd /home/duane/test
  38
  39     bash$ make initial.build
  40
  41           which:  (1) downloads files
  42                   (2) builds the libs
  43                   (3) builds OpenOCD
  44
  45 (6)     As you hack upon OpenOCD... to rebuild OpenOCD...
  46
  47     bash$ cd /home/duane/test
  48
  49     bash$ make remake
  50
  51           which: (1) re-bootstraps
  52                  (2) re-configures
  53                  (3) re-builds
  54                  (4) re-installs.
  55
  56 =======
  57 **END**
  58 =======