testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg

   1 #daemon configuration
   2 telnet_port 4444
   3 gdb_port 3333
   4
   5 # tell gdb our flash memory map
   6 gdb_memory_map enable
   7 # enable flash programming
   8 gdb_flash_program enable
   9
  10 #interface
  11 interface ft2232
  12 ft2232_device_desc "Turtelizer JTAG/RS232 Adapter A"
  13 ft2232_layout turtelizer2
  14 ft2232_vid_pid 0x0403 0xbdc8
  15 jtag_speed 0
  16 jtag_nsrst_delay 200
  17 jtag_ntrst_delay 200
  18
  19 #use combined on interfaces or targets that can't set TRST/SRST separately
  20 reset_config srst_only srst_pulls_trst
  21
  22 #jtag scan chain
  23 jtag newtap at91 cpu -irlen 4 -irmask 0xf
  24
  25 #target configuration
  26 target create target0 arm7tdmi -endian little -chain-position 0
  27 [new_target_name] configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup false
  28
  29 target_script 0 reset .\prj\at91r40008_reset.script
  30
  31 flash bank cfi 0x10000000 0x400000 2 2 0
  32
  33 # For more information about the configuration files,
  34 # look at the OpenOCD User's Guide.
  35
  36 init
  37 reset halt