testing/examples/STR710Test/prj/str710_jtagkey.cfg

   1 #daemon configuration
   2 telnet_port 4444
   3 gdb_port 3333
   4
   5 # tell gdb our flash memory map
   6 # and enable flash programming
   7 gdb_memory_map enable
   8 gdb_flash_program enable
   9
  10 #interface
  11 interface ft2232
  12 ft2232_device_desc "Amontec JTAGkey A"
  13 ft2232_layout jtagkey
  14 ft2232_vid_pid 0x0403 0xcff8
  15 jtag_speed 0
  16
  17 #use combined on interfaces or targets that can't set TRST/SRST separately
  18 reset_config trst_and_srst srst_pulls_trst
  19
  20 #jtag scan chain
  21 jtag newtap str7 cpu -irlen 4 -irmask 0xf
  22
  23 #target configuration
  24 target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
  25 [new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false
  26
  27 target_script 0 gdb_program_config .\prj\str710_program.script
  28
  29 #flash bank str7x <base> <size> 0 0 <target#> <variant>
  30 flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
  31
  32 # For more information about the configuration files,
  33 # look at the OpenOCD User's Guide.
  34
  35 init
  36 reset halt