testing/examples/STR912Test/prj/str912_jtagkey.cfg

   1 #daemon configuration
   2 telnet_port 4444
   3 gdb_port 3333
   4
   5 # tell gdb our flash memory map
   6 # and enable flash programming
   7 gdb_memory_map enable
   8 gdb_flash_program enable
   9
  10 #interface
  11 interface ft2232
  12 ft2232_device_desc "Amontec JTAGkey A"
  13 ft2232_layout jtagkey
  14 ft2232_vid_pid 0x0403 0xcff8
  15 jtag_speed 1
  16
  17 jtag_nsrst_delay 100
  18 jtag_ntrst_delay 100
  19
  20 #use combined on interfaces or targets that can't set TRST/SRST separately
  21 reset_config trst_and_srst
  22
  23 #jtag scan chain
  24 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
  25 jtag_device 8 0x1 0x1 0xfe
  26 jtag_device 4 0x1 0xf 0xe
  27 jtag_device 5 0x1 0x1 0x1e
  28
  29 #target configuration
  30 daemon_startup reset
  31
  32 #target <type> <startup mode>
  33 #target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
  34 target arm966e little 1 arm966e
  35
  36 target_script 0 gdb_program_config .\prj\str912_program.script
  37
  38 working_area 0 0x50000000 16384 nobackup
  39
  40 #flash bank str7x <base> <size> 0 0 <target#> <variant>
  41 flash bank str9x 0x00000000 0x00080000 0 0 0
  42
  43 # For more information about the configuration files, take a look at:
  44 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger