This file should include highlights of the changes made in the OpenOCD openocd-0.3.0 source archive release. See the repository history for details about what changed, including bugfixes and other issues not mentioned here. JTAG Layer: FT2232H (high speed USB) support doesn't need separate configuration New FT2232H JTAG adapters: Amontec, Olimex, Signalyzer New reset_config options for SRST gating the JTAG clock (or not) TAP declaration no longer requires ircapture and mask attributes Scan chain setup should be more robust, with better diagnostics New TAP events: "post-reset" for TAP-invariant setup code (TAPs not usable yet) "setup" for use once TAPs are addressable (e.g. with ICEpick) Overridable Tcl "init_reset" and "jtag_init" procedures Simple "autoprobe" mechanism to help simplify server setup Boundary Scan: SVF bugfixes ... parsing fixes, better STATE switch conformance XSVF bugfixes ... be more correct, handle Xilinx tool output Target Layer: Warn on use of obsolete numeric target IDs New commands for use with Cortex-M3 processors: "cortex_m3 disassemble" ... Thumb2 disassembly (UAL format) "cortex_m3 vector_catch" ... traps certain hardware faults without tying up breakpoint resources If you're willing to help debug it VERY EARLY Cortex-A8 and ARMv7A support Updated BeagleBoard.org hardware support you may need to explicitly "reset" after connect-to-Beagle New commands for use with XScale processors: "xscale vector_table" ARM bugfixes to single-stepping Thumb code ETM: unavailable registers are not listed ETB, ETM: report actual hardware status ARM9 name change: "arm9 vector_catch" not "arm9tdmi vector_catch" ARM11 single stepping support for i.MX31 bugfix for missing "arm11" prefix on "arm11 memwrite ..." GDB support gdb_attach command is gone Flash Layer: The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips New drivers: lpc2900, for NXP LPC2900 chips (ARM968 based) mx3_nand, for imx31 New "last" flag for NOR "flash erase_sector" and "flash protect" The "nand erase N" command now erases all of bank N Speed up davinci_nand by about 3x Board, Target, and Interface Configuration Scripts: Amontec JTAGkey2 support Cleanup and additions for the TI/Luminary Stellaris scripts LPC1768 target (and flash) support Keil MCB1700 eval board Samsung s3c2450 Mini2440 board Numeric TAP and Target identifiers now trigger warnings PXA255 partially enumerates Documentation: Capture more debugging and setup advice Notes on target source code changes that may help debugging Build and Release: Clean builds on (32-bit) Cygwin Clean builds on 64-bit MinGW For more details about what has changed since the last release, see the ChangeLog associated with this source archive. For older NEWS, see the NEWS files associated with each release (i.e. NEWS-). For more information about contributing test reports, bug fixes, or new features and device support, please read the new Developer Manual (or the BUGS and PATCHES files in the source archive).