/* SPDX-License-Identifier: GPL-2.0-or-later */ /*************************************************************************** * Copyright (C) 2005 by Dominic Rath * * Copyright (C) 2007,2008 Øyvind Harboe * * Copyright (C) 2008 by Spencer Oliver * * Copyright (C) 2009 Zachary T Welch * * Copyright (C) 2010 by Antonio Borneo * ***************************************************************************/ #ifndef OPENOCD_FLASH_NOR_DRIVER_H #define OPENOCD_FLASH_NOR_DRIVER_H struct flash_bank; #define __FLASH_BANK_COMMAND(name) \ COMMAND_HELPER(name, struct flash_bank *bank) /** * @brief Provides the implementation-independent structure that defines * all of the callbacks required by OpenOCD flash drivers. * * Driver authors must implement the routines defined here, providing an * instance with the fields filled out. After that, the instance must * be registered in flash.c, so it can be used by the driver lookup system. * * Specifically, the user can issue the command: @par * @code * flash bank DRIVERNAME ...parameters... * @endcode * * OpenOCD will search for the driver with a @c flash_driver_s::name * that matches @c DRIVERNAME. * * The flash subsystem calls some of the other drivers routines a using * corresponding static flash_driver_callback() * routine in flash.c. */ struct flash_driver { /** * Gives a human-readable name of this flash driver, * This field is used to select and initialize the driver. */ const char *name; /** * Gives a human-readable description of arguments. */ const char *usage; /** * An array of driver-specific commands to register. When called * during the "flash bank" command, the driver can register addition * commands to support new flash chip functions. */ const struct command_registration *commands; /** * Finish the "flash bank" command for @a bank. The * @a bank parameter will have been filled in by the core flash * layer when this routine is called, and the driver can store * additional information in its struct flash_bank::driver_priv field. * * The CMD_ARGV are: @par * @code * CMD_ARGV[0] = bank * CMD_ARGV[1] = drivername {name above} * CMD_ARGV[2] = baseaddress * CMD_ARGV[3] = lengthbytes * CMD_ARGV[4] = chip_width_in bytes * CMD_ARGV[5] = bus_width_in_bytes * CMD_ARGV[6] = driver-specific parameters * @endcode * * For example, CMD_ARGV[4] = 2 (for 16 bit flash), * CMD_ARGV[5] = 4 (for 32 bit bus). * * If extra arguments are provided (@a CMD_ARGC > 6), they will * start in @a CMD_ARGV[6]. These can be used to implement * driver-specific extensions. * * @returns ERROR_OK if successful; otherwise, an error code. */ __FLASH_BANK_COMMAND((*flash_bank_command)); /** * Bank/sector erase routine (target-specific). When * called, the flash driver should erase the specified sectors * using whatever means are at its disposal. * * @param bank The bank of flash to be erased. * @param first The number of the first sector to erase, typically 0. * @param last The number of the last sector to erase, typically N-1. * @returns ERROR_OK if successful; otherwise, an error code. */ int (*erase)(struct flash_bank *bank, unsigned int first, unsigned int last); /** * Bank/sector protection routine (target-specific). * * If protection is not implemented, set method to NULL * * When called, the driver should enable/disable protection * for MINIMUM the range covered by first..last sectors * inclusive. Some chips have alignment requirements will * cause the actual range to be protected / unprotected to * be larger than the first..last range. * * @param bank The bank to protect or unprotect. * @param set If non-zero, enable protection; if 0, disable it. * @param first The first sector to (un)protect, typically 0. * @param last The last sector to (un)project, typically N-1. * @returns ERROR_OK if successful; otherwise, an error code. */ int (*protect)(struct flash_bank *bank, int set, unsigned int first, unsigned int last); /** * Program data into the flash. Note CPU address will be * "bank->base + offset", while the physical address is * dependent upon current target MMU mappings. * * @param bank The bank to program * @param buffer The data bytes to write. * @param offset The offset into the chip to program. * @param count The number of bytes to write. * @returns ERROR_OK if successful; otherwise, an error code. */ int (*write)(struct flash_bank *bank, const uint8_t *buffer, uint32_t offset, uint32_t count); /** * Read data from the flash. Note CPU address will be * "bank->base + offset", while the physical address is * dependent upon current target MMU mappings. * * @param bank The bank to read. * @param buffer The data bytes read. * @param offset The offset into the chip to read. * @param count The number of bytes to read. * @returns ERROR_OK if successful; otherwise, an error code. */ int (*read)(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count); /** * Verify data in flash. Note CPU address will be * "bank->base + offset", while the physical address is * dependent upon current target MMU mappings. * * @param bank The bank to verify * @param buffer The data bytes to verify against. * @param offset The offset into the chip to verify. * @param count The number of bytes to verify. * @returns ERROR_OK if successful; otherwise, an error code. */ int (*verify)(struct flash_bank *bank, const uint8_t *buffer, uint32_t offset, uint32_t count); /** * Probe to determine what kind of flash is present. * This is invoked by the "probe" script command. * * @param bank The bank to probe * @returns ERROR_OK if successful; otherwise, an error code. */ int (*probe)(struct flash_bank *bank); /** * Check the erasure status of a flash bank. * When called, the driver routine must perform the required * checks and then set the @c flash_sector_s::is_erased field * for each of the flash banks's sectors. * * @param bank The bank to check * @returns ERROR_OK if successful; otherwise, an error code. */ int (*erase_check)(struct flash_bank *bank); /** * Determine if the specific bank is "protected" or not. * When called, the driver routine must must perform the * required protection check(s) and then set the @c * flash_sector_s::is_protected field for each of the flash * bank's sectors. * * If protection is not implemented, set method to NULL * * @param bank - the bank to check * @returns ERROR_OK if successful; otherwise, an error code. */ int (*protect_check)(struct flash_bank *bank); /** * Display human-readable information about the flash * bank. * * @param bank - the bank to get info about * @param cmd - command invocation instance for which to generate * the textual output * @returns ERROR_OK if successful; otherwise, an error code. */ int (*info)(struct flash_bank *bank, struct command_invocation *cmd); /** * A more gentle flavor of flash_driver_s::probe, performing * setup with less noise. Generally, driver routines should test * to see if the bank has already been probed; if it has, the * driver probably should not perform its probe a second time. * * This callback is often called from the inside of other * routines (e.g. GDB flash downloads) to autoprobe the flash as * it is programming the flash. * * @param bank - the bank to probe * @returns ERROR_OK if successful; otherwise, an error code. */ int (*auto_probe)(struct flash_bank *bank); /** * Deallocates private driver structures. * Use default_flash_free_driver_priv() to simply free(bank->driver_priv) * * @param bank - the bank being destroyed */ void (*free_driver_priv)(struct flash_bank *bank); }; #define FLASH_BANK_COMMAND_HANDLER(name) \ static __FLASH_BANK_COMMAND(name) /** * Find a NOR flash driver by its name. * @param name The name of the requested driver. * @returns The flash_driver called @c name, or NULL if not found. */ const struct flash_driver *flash_driver_find_by_name(const char *name); extern const struct flash_driver aduc702x_flash; extern const struct flash_driver aducm360_flash; extern const struct flash_driver ambiqmicro_flash; extern const struct flash_driver at91sam3_flash; extern const struct flash_driver at91sam4_flash; extern const struct flash_driver at91sam4l_flash; extern const struct flash_driver at91sam7_flash; extern const struct flash_driver at91samd_flash; extern const struct flash_driver ath79_flash; extern const struct flash_driver atsame5_flash; extern const struct flash_driver atsamv_flash; extern const struct flash_driver avr_flash; extern const struct flash_driver bluenrgx_flash; extern const struct flash_driver cc26xx_flash; extern const struct flash_driver cc3220sf_flash; extern const struct flash_driver cfi_flash; extern const struct flash_driver dsp5680xx_flash; extern const struct flash_driver efm32_flash; extern const struct flash_driver em357_flash; extern const struct flash_driver eneispif_flash; extern const struct flash_driver esirisc_flash; extern const struct flash_driver faux_flash; extern const struct flash_driver fespi_flash; extern const struct flash_driver fm3_flash; extern const struct flash_driver fm4_flash; extern const struct flash_driver jtagspi_flash; extern const struct flash_driver kinetis_flash; extern const struct flash_driver kinetis_ke_flash; extern const struct flash_driver lpc2000_flash; extern const struct flash_driver lpc288x_flash; extern const struct flash_driver lpc2900_flash; extern const struct flash_driver lpcspifi_flash; extern const struct flash_driver max32xxx_flash; extern const struct flash_driver mdr_flash; extern const struct flash_driver mrvlqspi_flash; extern const struct flash_driver msp432_flash; extern const struct flash_driver niietcm4_flash; extern const struct flash_driver npcx_flash; extern const struct flash_driver nrf51_flash; extern const struct flash_driver nrf5_flash; extern const struct flash_driver numicro_flash; extern const struct flash_driver ocl_flash; extern const struct flash_driver pic32mx_flash; extern const struct flash_driver psoc4_flash; extern const struct flash_driver psoc5lp_eeprom_flash; extern const struct flash_driver psoc5lp_flash; extern const struct flash_driver psoc5lp_nvl_flash; extern const struct flash_driver psoc6_flash; extern const struct flash_driver qn908x_flash; extern const struct flash_driver renesas_rpchf_flash; extern const struct flash_driver rp2040_flash; extern const struct flash_driver rsl10_flash; extern const struct flash_driver sh_qspi_flash; extern const struct flash_driver sim3x_flash; extern const struct flash_driver stellaris_flash; extern const struct flash_driver stm32f1x_flash; extern const struct flash_driver stm32f2x_flash; extern const struct flash_driver stm32h7x_flash; extern const struct flash_driver stm32l4x_flash; extern const struct flash_driver stm32lx_flash; extern const struct flash_driver stmqspi_flash; extern const struct flash_driver stmsmi_flash; extern const struct flash_driver str7x_flash; extern const struct flash_driver str9x_flash; extern const struct flash_driver str9xpec_flash; extern const struct flash_driver swm050_flash; extern const struct flash_driver tms470_flash; extern const struct flash_driver virtual_flash; extern const struct flash_driver w600_flash; extern const struct flash_driver xcf_flash; extern const struct flash_driver xmc1xxx_flash; extern const struct flash_driver xmc4xxx_flash; #endif /* OPENOCD_FLASH_NOR_DRIVER_H */