// SPDX-License-Identifier: GPL-2.0-or-later /*************************************************************************** * Copyright (C) 2009 Zachary T Welch * * zw@superlucidity.net * * * * Copyright (C) 2007,2008,2009 Øyvind Harboe * * oyvind.harboe@zylin.com * * * * Copyright (C) 2009 SoftPLC Corporation * * http://softplc.com * * dick@softplc.com * * * * Copyright (C) 2005 by Dominic Rath * * Dominic.Rath@gmx.de * ***************************************************************************/ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "adapter.h" #include "jtag.h" #include "swd.h" #include "interface.h" #include #include #include "helper/system.h" #ifdef HAVE_STRINGS_H #include #endif /* SVF and XSVF are higher level JTAG command sets (for boundary scan) */ #include "svf/svf.h" #include "xsvf/xsvf.h" /* ipdbg are utilities to debug IP-cores. It uses JTAG for transport. */ #include "server/ipdbg.h" /** The number of JTAG queue flushes (for profiling and debugging purposes). */ static int jtag_flush_queue_count; /* Sleep this # of ms after flushing the queue */ static int jtag_flush_queue_sleep; static void jtag_add_scan_check(struct jtag_tap *active, void (*jtag_add_scan)(struct jtag_tap *active, int in_num_fields, const struct scan_field *in_fields, tap_state_t state), int in_num_fields, struct scan_field *in_fields, tap_state_t state); /** * The jtag_error variable is set when an error occurs while executing * the queue. Application code may set this using jtag_set_error(), * when an error occurs during processing that should be reported during * jtag_execute_queue(). * * The value is set and cleared, but never read by normal application code. * * This value is returned (and cleared) by jtag_execute_queue(). */ static int jtag_error = ERROR_OK; static const char *jtag_event_strings[] = { [JTAG_TRST_ASSERTED] = "TAP reset", [JTAG_TAP_EVENT_SETUP] = "TAP setup", [JTAG_TAP_EVENT_ENABLE] = "TAP enabled", [JTAG_TAP_EVENT_DISABLE] = "TAP disabled", }; /* * JTAG adapters must initialize with TRST and SRST de-asserted * (they're negative logic, so that means *high*). But some * hardware doesn't necessarily work that way ... so set things * up so that jtag_init() always forces that state. */ static int jtag_trst = -1; static int jtag_srst = -1; /** * List all TAPs that have been created. */ static struct jtag_tap *__jtag_all_taps; static enum reset_types jtag_reset_config = RESET_NONE; tap_state_t cmd_queue_cur_state = TAP_RESET; static bool jtag_verify_capture_ir = true; static int jtag_verify = 1; /* how long the OpenOCD should wait before attempting JTAG communication after reset lines *deasserted (in ms) */ static int adapter_nsrst_delay; /* default to no nSRST delay */ static int jtag_ntrst_delay;/* default to no nTRST delay */ static int adapter_nsrst_assert_width; /* width of assertion */ static int jtag_ntrst_assert_width; /* width of assertion */ /** * Contains a single callback along with a pointer that will be passed * when an event occurs. */ struct jtag_event_callback { /** a event callback */ jtag_event_handler_t callback; /** the private data to pass to the callback */ void *priv; /** the next callback */ struct jtag_event_callback *next; }; /* callbacks to inform high-level handlers about JTAG state changes */ static struct jtag_event_callback *jtag_event_callbacks; extern struct adapter_driver *adapter_driver; void jtag_set_flush_queue_sleep(int ms) { jtag_flush_queue_sleep = ms; } void jtag_set_error(int error) { if ((error == ERROR_OK) || (jtag_error != ERROR_OK)) return; jtag_error = error; } int jtag_error_clear(void) { int temp = jtag_error; jtag_error = ERROR_OK; return temp; } /************/ static bool jtag_poll = true; static bool jtag_poll_en = true; bool is_jtag_poll_safe(void) { /* Polling can be disabled explicitly with set_enabled(false). * It can also be masked with mask(). * It is also implicitly disabled while TRST is active and * while SRST is gating the JTAG clock. */ if (!jtag_poll_en) return false; if (!transport_is_jtag()) return jtag_poll; if (!jtag_poll || jtag_trst != 0) return false; return jtag_srst == 0 || (jtag_reset_config & RESET_SRST_NO_GATING); } bool jtag_poll_get_enabled(void) { return jtag_poll; } void jtag_poll_set_enabled(bool value) { jtag_poll = value; } bool jtag_poll_mask(void) { bool retval = jtag_poll_en; jtag_poll_en = false; return retval; } void jtag_poll_unmask(bool saved) { jtag_poll_en = saved; } /************/ struct jtag_tap *jtag_all_taps(void) { return __jtag_all_taps; }; unsigned jtag_tap_count(void) { struct jtag_tap *t = jtag_all_taps(); unsigned n = 0; while (t) { n++; t = t->next_tap; } return n; } unsigned jtag_tap_count_enabled(void) { struct jtag_tap *t = jtag_all_taps(); unsigned n = 0; while (t) { if (t->enabled) n++; t = t->next_tap; } return n; } /** Append a new TAP to the chain of all taps. */ static void jtag_tap_add(struct jtag_tap *t) { unsigned jtag_num_taps = 0; struct jtag_tap **tap = &__jtag_all_taps; while (*tap) { jtag_num_taps++; tap = &(*tap)->next_tap; } *tap = t; t->abs_chain_position = jtag_num_taps; } /* returns a pointer to the n-th device in the scan chain */ struct jtag_tap *jtag_tap_by_position(unsigned n) { struct jtag_tap *t = jtag_all_taps(); while (t && n-- > 0) t = t->next_tap; return t; } struct jtag_tap *jtag_tap_by_string(const char *s) { /* try by name first */ struct jtag_tap *t = jtag_all_taps(); while (t) { if (strcmp(t->dotted_name, s) == 0) return t; t = t->next_tap; } /* no tap found by name, so try to parse the name as a number */ unsigned n; if (parse_uint(s, &n) != ERROR_OK) return NULL; /* FIXME remove this numeric fallback code late June 2010, along * with all info in the User's Guide that TAPs have numeric IDs. * Also update "scan_chain" output to not display the numbers. */ t = jtag_tap_by_position(n); if (t) LOG_WARNING("Specify TAP '%s' by name, not number %u", t->dotted_name, n); return t; } struct jtag_tap *jtag_tap_next_enabled(struct jtag_tap *p) { p = p ? p->next_tap : jtag_all_taps(); while (p) { if (p->enabled) return p; p = p->next_tap; } return NULL; } const char *jtag_tap_name(const struct jtag_tap *tap) { return (!tap) ? "(unknown)" : tap->dotted_name; } int jtag_register_event_callback(jtag_event_handler_t callback, void *priv) { struct jtag_event_callback **callbacks_p = &jtag_event_callbacks; if (!callback) return ERROR_COMMAND_SYNTAX_ERROR; if (*callbacks_p) { while ((*callbacks_p)->next) callbacks_p = &((*callbacks_p)->next); callbacks_p = &((*callbacks_p)->next); } (*callbacks_p) = malloc(sizeof(struct jtag_event_callback)); (*callbacks_p)->callback = callback; (*callbacks_p)->priv = priv; (*callbacks_p)->next = NULL; return ERROR_OK; } int jtag_unregister_event_callback(jtag_event_handler_t callback, void *priv) { struct jtag_event_callback **p = &jtag_event_callbacks, *temp; if (!callback) return ERROR_COMMAND_SYNTAX_ERROR; while (*p) { if (((*p)->priv != priv) || ((*p)->callback != callback)) { p = &(*p)->next; continue; } temp = *p; *p = (*p)->next; free(temp); } return ERROR_OK; } int jtag_call_event_callbacks(enum jtag_event event) { struct jtag_event_callback *callback = jtag_event_callbacks; LOG_DEBUG("jtag event: %s", jtag_event_strings[event]); while (callback) { struct jtag_event_callback *next; /* callback may remove itself */ next = callback->next; callback->callback(event, callback->priv); callback = next; } return ERROR_OK; } static void jtag_checks(void) { assert(jtag_trst == 0); } static void jtag_prelude(tap_state_t state) { jtag_checks(); assert(state != TAP_INVALID); cmd_queue_cur_state = state; } void jtag_add_ir_scan_noverify(struct jtag_tap *active, const struct scan_field *in_fields, tap_state_t state) { jtag_prelude(state); int retval = interface_jtag_add_ir_scan(active, in_fields, state); jtag_set_error(retval); } static void jtag_add_ir_scan_noverify_callback(struct jtag_tap *active, int dummy, const struct scan_field *in_fields, tap_state_t state) { jtag_add_ir_scan_noverify(active, in_fields, state); } /* If fields->in_value is filled out, then the captured IR value will be checked */ void jtag_add_ir_scan(struct jtag_tap *active, struct scan_field *in_fields, tap_state_t state) { assert(state != TAP_RESET); if (jtag_verify && jtag_verify_capture_ir) { /* 8 x 32 bit id's is enough for all invocations */ /* if we are to run a verification of the ir scan, we need to get the input back. * We may have to allocate space if the caller didn't ask for the input back. */ in_fields->check_value = active->expected; in_fields->check_mask = active->expected_mask; jtag_add_scan_check(active, jtag_add_ir_scan_noverify_callback, 1, in_fields, state); } else jtag_add_ir_scan_noverify(active, in_fields, state); } void jtag_add_plain_ir_scan(int num_bits, const uint8_t *out_bits, uint8_t *in_bits, tap_state_t state) { assert(out_bits); assert(state != TAP_RESET); jtag_prelude(state); int retval = interface_jtag_add_plain_ir_scan( num_bits, out_bits, in_bits, state); jtag_set_error(retval); } static int jtag_check_value_inner(uint8_t *captured, uint8_t *in_check_value, uint8_t *in_check_mask, int num_bits); static int jtag_check_value_mask_callback(jtag_callback_data_t data0, jtag_callback_data_t data1, jtag_callback_data_t data2, jtag_callback_data_t data3) { return jtag_check_value_inner((uint8_t *)data0, (uint8_t *)data1, (uint8_t *)data2, (int)data3); } static void jtag_add_scan_check(struct jtag_tap *active, void (*jtag_add_scan)( struct jtag_tap *active, int in_num_fields, const struct scan_field *in_fields, tap_state_t state), int in_num_fields, struct scan_field *in_fields, tap_state_t state) { jtag_add_scan(active, in_num_fields, in_fields, state); for (int i = 0; i < in_num_fields; i++) { if ((in_fields[i].check_value) && (in_fields[i].in_value)) { jtag_add_callback4(jtag_check_value_mask_callback, (jtag_callback_data_t)in_fields[i].in_value, (jtag_callback_data_t)in_fields[i].check_value, (jtag_callback_data_t)in_fields[i].check_mask, (jtag_callback_data_t)in_fields[i].num_bits); } } } void jtag_add_dr_scan_check(struct jtag_tap *active, int in_num_fields, struct scan_field *in_fields, tap_state_t state) { if (jtag_verify) jtag_add_scan_check(active, jtag_add_dr_scan, in_num_fields, in_fields, state); else jtag_add_dr_scan(active, in_num_fields, in_fields, state); } void jtag_add_dr_scan(struct jtag_tap *active, int in_num_fields, const struct scan_field *in_fields, tap_state_t state) { assert(state != TAP_RESET); jtag_prelude(state); int retval; retval = interface_jtag_add_dr_scan(active, in_num_fields, in_fields, state); jtag_set_error(retval); } void jtag_add_plain_dr_scan(int num_bits, const uint8_t *out_bits, uint8_t *in_bits, tap_state_t state) { assert(out_bits); assert(state != TAP_RESET); jtag_prelude(state); int retval; retval = interface_jtag_add_plain_dr_scan(num_bits, out_bits, in_bits, state); jtag_set_error(retval); } void jtag_add_tlr(void) { jtag_prelude(TAP_RESET); jtag_set_error(interface_jtag_add_tlr()); /* NOTE: order here matches TRST path in jtag_add_reset() */ jtag_call_event_callbacks(JTAG_TRST_ASSERTED); jtag_notify_event(JTAG_TRST_ASSERTED); } /** * If supported by the underlying adapter, this clocks a raw bit sequence * onto TMS for switching between JTAG and SWD modes. * * DO NOT use this to bypass the integrity checks and logging provided * by the jtag_add_pathmove() and jtag_add_statemove() calls. * * @param nbits How many bits to clock out. * @param seq The bit sequence. The LSB is bit 0 of seq[0]. * @param state The JTAG tap state to record on completion. Use * TAP_INVALID to represent being in in SWD mode. * * @todo Update naming conventions to stop assuming everything is JTAG. */ int jtag_add_tms_seq(unsigned nbits, const uint8_t *seq, enum tap_state state) { int retval; if (!(adapter_driver->jtag_ops->supported & DEBUG_CAP_TMS_SEQ)) return ERROR_JTAG_NOT_IMPLEMENTED; jtag_checks(); cmd_queue_cur_state = state; retval = interface_add_tms_seq(nbits, seq, state); jtag_set_error(retval); return retval; } void jtag_add_pathmove(int num_states, const tap_state_t *path) { tap_state_t cur_state = cmd_queue_cur_state; /* the last state has to be a stable state */ if (!tap_is_state_stable(path[num_states - 1])) { LOG_ERROR("BUG: TAP path doesn't finish in a stable state"); jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE); return; } for (int i = 0; i < num_states; i++) { if (path[i] == TAP_RESET) { LOG_ERROR("BUG: TAP_RESET is not a valid state for pathmove sequences"); jtag_set_error(ERROR_JTAG_STATE_INVALID); return; } if (tap_state_transition(cur_state, true) != path[i] && tap_state_transition(cur_state, false) != path[i]) { LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_name(cur_state), tap_state_name(path[i])); jtag_set_error(ERROR_JTAG_TRANSITION_INVALID); return; } cur_state = path[i]; } jtag_checks(); jtag_set_error(interface_jtag_add_pathmove(num_states, path)); cmd_queue_cur_state = path[num_states - 1]; } int jtag_add_statemove(tap_state_t goal_state) { tap_state_t cur_state = cmd_queue_cur_state; if (goal_state != cur_state) { LOG_DEBUG("cur_state=%s goal_state=%s", tap_state_name(cur_state), tap_state_name(goal_state)); } /* If goal is RESET, be paranoid and force that that transition * (e.g. five TCK cycles, TMS high). Else trust "cur_state". */ if (goal_state == TAP_RESET) jtag_add_tlr(); else if (goal_state == cur_state) /* nothing to do */; else if (tap_is_state_stable(cur_state) && tap_is_state_stable(goal_state)) { unsigned tms_bits = tap_get_tms_path(cur_state, goal_state); unsigned tms_count = tap_get_tms_path_len(cur_state, goal_state); tap_state_t moves[8]; assert(tms_count < ARRAY_SIZE(moves)); for (unsigned i = 0; i < tms_count; i++, tms_bits >>= 1) { bool bit = tms_bits & 1; cur_state = tap_state_transition(cur_state, bit); moves[i] = cur_state; } jtag_add_pathmove(tms_count, moves); } else if (tap_state_transition(cur_state, true) == goal_state || tap_state_transition(cur_state, false) == goal_state) jtag_add_pathmove(1, &goal_state); else return ERROR_FAIL; return ERROR_OK; } void jtag_add_runtest(int num_cycles, tap_state_t state) { jtag_prelude(state); jtag_set_error(interface_jtag_add_runtest(num_cycles, state)); } void jtag_add_clocks(int num_cycles) { if (!tap_is_state_stable(cmd_queue_cur_state)) { LOG_ERROR("jtag_add_clocks() called with TAP in unstable state \"%s\"", tap_state_name(cmd_queue_cur_state)); jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE); return; } if (num_cycles > 0) { jtag_checks(); jtag_set_error(interface_jtag_add_clocks(num_cycles)); } } static int adapter_system_reset(int req_srst) { int retval; if (req_srst) { if (!(jtag_reset_config & RESET_HAS_SRST)) { LOG_ERROR("BUG: can't assert SRST"); return ERROR_FAIL; } req_srst = 1; } /* Maybe change SRST signal state */ if (jtag_srst != req_srst) { retval = adapter_driver->reset(0, req_srst); if (retval != ERROR_OK) { LOG_ERROR("SRST error"); return ERROR_FAIL; } jtag_srst = req_srst; if (req_srst) { LOG_DEBUG("SRST line asserted"); if (adapter_nsrst_assert_width) jtag_sleep(adapter_nsrst_assert_width * 1000); } else { LOG_DEBUG("SRST line released"); if (adapter_nsrst_delay) jtag_sleep(adapter_nsrst_delay * 1000); } } return ERROR_OK; } static void legacy_jtag_add_reset(int req_tlr_or_trst, int req_srst) { int trst_with_tlr = 0; int new_srst = 0; int new_trst = 0; /* Without SRST, we must use target-specific JTAG operations * on each target; callers should not be requesting SRST when * that signal doesn't exist. * * RESET_SRST_PULLS_TRST is a board or chip level quirk, which * can kick in even if the JTAG adapter can't drive TRST. */ if (req_srst) { if (!(jtag_reset_config & RESET_HAS_SRST)) { LOG_ERROR("BUG: can't assert SRST"); jtag_set_error(ERROR_FAIL); return; } if ((jtag_reset_config & RESET_SRST_PULLS_TRST) != 0 && !req_tlr_or_trst) { LOG_ERROR("BUG: can't assert only SRST"); jtag_set_error(ERROR_FAIL); return; } new_srst = 1; } /* JTAG reset (entry to TAP_RESET state) can always be achieved * using TCK and TMS; that may go through a TAP_{IR,DR}UPDATE * state first. TRST accelerates it, and bypasses those states. * * RESET_TRST_PULLS_SRST is a board or chip level quirk, which * can kick in even if the JTAG adapter can't drive SRST. */ if (req_tlr_or_trst) { if (!(jtag_reset_config & RESET_HAS_TRST)) trst_with_tlr = 1; else if ((jtag_reset_config & RESET_TRST_PULLS_SRST) != 0 && !req_srst) trst_with_tlr = 1; else new_trst = 1; } /* Maybe change TRST and/or SRST signal state */ if (jtag_srst != new_srst || jtag_trst != new_trst) { int retval; retval = interface_jtag_add_reset(new_trst, new_srst); if (retval != ERROR_OK) jtag_set_error(retval); else retval = jtag_execute_queue(); if (retval != ERROR_OK) { LOG_ERROR("TRST/SRST error"); return; } } /* SRST resets everything hooked up to that signal */ if (jtag_srst != new_srst) { jtag_srst = new_srst; if (jtag_srst) { LOG_DEBUG("SRST line asserted"); if (adapter_nsrst_assert_width) jtag_add_sleep(adapter_nsrst_assert_width * 1000); } else { LOG_DEBUG("SRST line released"); if (adapter_nsrst_delay) jtag_add_sleep(adapter_nsrst_delay * 1000); } } /* Maybe enter the JTAG TAP_RESET state ... * - using only TMS, TCK, and the JTAG state machine * - or else more directly, using TRST * * TAP_RESET should be invisible to non-debug parts of the system. */ if (trst_with_tlr) { LOG_DEBUG("JTAG reset with TLR instead of TRST"); jtag_add_tlr(); } else if (jtag_trst != new_trst) { jtag_trst = new_trst; if (jtag_trst) { LOG_DEBUG("TRST line asserted"); tap_set_state(TAP_RESET); if (jtag_ntrst_assert_width) jtag_add_sleep(jtag_ntrst_assert_width * 1000); } else { LOG_DEBUG("TRST line released"); if (jtag_ntrst_delay) jtag_add_sleep(jtag_ntrst_delay * 1000); /* We just asserted nTRST, so we're now in TAP_RESET. * Inform possible listeners about this, now that * JTAG instructions and data can be shifted. This * sequence must match jtag_add_tlr(). */ jtag_call_event_callbacks(JTAG_TRST_ASSERTED); jtag_notify_event(JTAG_TRST_ASSERTED); } } } /* FIXME: name is misleading; we do not plan to "add" reset into jtag queue */ void jtag_add_reset(int req_tlr_or_trst, int req_srst) { int retval; int trst_with_tlr = 0; int new_srst = 0; int new_trst = 0; if (!adapter_driver->reset) { legacy_jtag_add_reset(req_tlr_or_trst, req_srst); return; } /* Without SRST, we must use target-specific JTAG operations * on each target; callers should not be requesting SRST when * that signal doesn't exist. * * RESET_SRST_PULLS_TRST is a board or chip level quirk, which * can kick in even if the JTAG adapter can't drive TRST. */ if (req_srst) { if (!(jtag_reset_config & RESET_HAS_SRST)) { LOG_ERROR("BUG: can't assert SRST"); jtag_set_error(ERROR_FAIL); return; } if ((jtag_reset_config & RESET_SRST_PULLS_TRST) != 0 && !req_tlr_or_trst) { LOG_ERROR("BUG: can't assert only SRST"); jtag_set_error(ERROR_FAIL); return; } new_srst = 1; } /* JTAG reset (entry to TAP_RESET state) can always be achieved * using TCK and TMS; that may go through a TAP_{IR,DR}UPDATE * state first. TRST accelerates it, and bypasses those states. * * RESET_TRST_PULLS_SRST is a board or chip level quirk, which * can kick in even if the JTAG adapter can't drive SRST. */ if (req_tlr_or_trst) { if (!(jtag_reset_config & RESET_HAS_TRST)) trst_with_tlr = 1; else if ((jtag_reset_config & RESET_TRST_PULLS_SRST) != 0 && !req_srst) trst_with_tlr = 1; else new_trst = 1; } /* Maybe change TRST and/or SRST signal state */ if (jtag_srst != new_srst || jtag_trst != new_trst) { /* guarantee jtag queue empty before changing reset status */ jtag_execute_queue(); retval = adapter_driver->reset(new_trst, new_srst); if (retval != ERROR_OK) { jtag_set_error(retval); LOG_ERROR("TRST/SRST error"); return; } } /* SRST resets everything hooked up to that signal */ if (jtag_srst != new_srst) { jtag_srst = new_srst; if (jtag_srst) { LOG_DEBUG("SRST line asserted"); if (adapter_nsrst_assert_width) jtag_add_sleep(adapter_nsrst_assert_width * 1000); } else { LOG_DEBUG("SRST line released"); if (adapter_nsrst_delay) jtag_add_sleep(adapter_nsrst_delay * 1000); } } /* Maybe enter the JTAG TAP_RESET state ... * - using only TMS, TCK, and the JTAG state machine * - or else more directly, using TRST * * TAP_RESET should be invisible to non-debug parts of the system. */ if (trst_with_tlr) { LOG_DEBUG("JTAG reset with TLR instead of TRST"); jtag_add_tlr(); jtag_execute_queue(); } else if (jtag_trst != new_trst) { jtag_trst = new_trst; if (jtag_trst) { LOG_DEBUG("TRST line asserted"); tap_set_state(TAP_RESET); if (jtag_ntrst_assert_width) jtag_add_sleep(jtag_ntrst_assert_width * 1000); } else { LOG_DEBUG("TRST line released"); if (jtag_ntrst_delay) jtag_add_sleep(jtag_ntrst_delay * 1000); /* We just asserted nTRST, so we're now in TAP_RESET. * Inform possible listeners about this, now that * JTAG instructions and data can be shifted. This * sequence must match jtag_add_tlr(). */ jtag_call_event_callbacks(JTAG_TRST_ASSERTED); jtag_notify_event(JTAG_TRST_ASSERTED); } } } void jtag_add_sleep(uint32_t us) { /** @todo Here, keep_alive() appears to be a layering violation!!! */ keep_alive(); jtag_set_error(interface_jtag_add_sleep(us)); } static int jtag_check_value_inner(uint8_t *captured, uint8_t *in_check_value, uint8_t *in_check_mask, int num_bits) { int retval = ERROR_OK; int compare_failed; if (in_check_mask) compare_failed = buf_cmp_mask(captured, in_check_value, in_check_mask, num_bits); else compare_failed = buf_cmp(captured, in_check_value, num_bits); if (compare_failed) { char *captured_str, *in_check_value_str; int bits = (num_bits > DEBUG_JTAG_IOZ) ? DEBUG_JTAG_IOZ : num_bits; /* NOTE: we've lost diagnostic context here -- 'which tap' */ captured_str = buf_to_hex_str(captured, bits); in_check_value_str = buf_to_hex_str(in_check_value, bits); LOG_WARNING("Bad value '%s' captured during DR or IR scan:", captured_str); LOG_WARNING(" check_value: 0x%s", in_check_value_str); free(captured_str); free(in_check_value_str); if (in_check_mask) { char *in_check_mask_str; in_check_mask_str = buf_to_hex_str(in_check_mask, bits); LOG_WARNING(" check_mask: 0x%s", in_check_mask_str); free(in_check_mask_str); } retval = ERROR_JTAG_QUEUE_FAILED; } return retval; } void jtag_check_value_mask(struct scan_field *field, uint8_t *value, uint8_t *mask) { assert(field->in_value); if (!value) { /* no checking to do */ return; } jtag_execute_queue_noclear(); int retval = jtag_check_value_inner(field->in_value, value, mask, field->num_bits); jtag_set_error(retval); } int default_interface_jtag_execute_queue(void) { if (!is_adapter_initialized()) { LOG_ERROR("No JTAG interface configured yet. " "Issue 'init' command in startup scripts " "before communicating with targets."); return ERROR_FAIL; } if (!transport_is_jtag()) { /* * FIXME: This should not happen! * There could be old code that queues jtag commands with non jtag interfaces so, for * the moment simply highlight it by log an error and return on empty execute_queue. * We should fix it quitting with assert(0) because it is an internal error. * The fix can be applied immediately after next release (v0.11.0 ?) */ LOG_ERROR("JTAG API jtag_execute_queue() called on non JTAG interface"); if (!adapter_driver->jtag_ops || !adapter_driver->jtag_ops->execute_queue) return ERROR_OK; } struct jtag_command *cmd = jtag_command_queue_get(); int result = adapter_driver->jtag_ops->execute_queue(cmd); while (debug_level >= LOG_LVL_DEBUG_IO && cmd) { switch (cmd->type) { case JTAG_SCAN: LOG_DEBUG_IO("JTAG %s SCAN to %s", cmd->cmd.scan->ir_scan ? "IR" : "DR", tap_state_name(cmd->cmd.scan->end_state)); for (int i = 0; i < cmd->cmd.scan->num_fields; i++) { struct scan_field *field = cmd->cmd.scan->fields + i; if (field->out_value) { char *str = buf_to_hex_str(field->out_value, field->num_bits); LOG_DEBUG_IO(" %db out: %s", field->num_bits, str); free(str); } if (field->in_value) { char *str = buf_to_hex_str(field->in_value, field->num_bits); LOG_DEBUG_IO(" %db in: %s", field->num_bits, str); free(str); } } break; case JTAG_TLR_RESET: LOG_DEBUG_IO("JTAG TLR RESET to %s", tap_state_name(cmd->cmd.statemove->end_state)); break; case JTAG_RUNTEST: LOG_DEBUG_IO("JTAG RUNTEST %d cycles to %s", cmd->cmd.runtest->num_cycles, tap_state_name(cmd->cmd.runtest->end_state)); break; case JTAG_RESET: { const char *reset_str[3] = { "leave", "deassert", "assert" }; LOG_DEBUG_IO("JTAG RESET %s TRST, %s SRST", reset_str[cmd->cmd.reset->trst + 1], reset_str[cmd->cmd.reset->srst + 1]); } break; case JTAG_PATHMOVE: LOG_DEBUG_IO("JTAG PATHMOVE (TODO)"); break; case JTAG_SLEEP: LOG_DEBUG_IO("JTAG SLEEP (TODO)"); break; case JTAG_STABLECLOCKS: LOG_DEBUG_IO("JTAG STABLECLOCKS (TODO)"); break; case JTAG_TMS: LOG_DEBUG_IO("JTAG TMS (TODO)"); break; default: LOG_ERROR("Unknown JTAG command: %d", cmd->type); break; } cmd = cmd->next; } return result; } void jtag_execute_queue_noclear(void) { jtag_flush_queue_count++; jtag_set_error(interface_jtag_execute_queue()); if (jtag_flush_queue_sleep > 0) { /* For debug purposes it can be useful to test performance * or behavior when delaying after flushing the queue, * e.g. to simulate long roundtrip times. */ usleep(jtag_flush_queue_sleep * 1000); } } int jtag_get_flush_queue_count(void) { return jtag_flush_queue_count; } int jtag_execute_queue(void) { jtag_execute_queue_noclear(); return jtag_error_clear(); } static int jtag_reset_callback(enum jtag_event event, void *priv) { struct jtag_tap *tap = priv; if (event == JTAG_TRST_ASSERTED) { tap->enabled = !tap->disabled_after_reset; /* current instruction is either BYPASS or IDCODE */ buf_set_ones(tap->cur_instr, tap->ir_length); tap->bypass = true; } return ERROR_OK; } /* sleep at least us microseconds. When we sleep more than 1000ms we * do an alive sleep, i.e. keep GDB alive. Note that we could starve * GDB if we slept for <1000ms many times. */ void jtag_sleep(uint32_t us) { if (us < 1000) usleep(us); else alive_sleep((us+999)/1000); } #define JTAG_MAX_AUTO_TAPS 20 #define EXTRACT_MFG(X) (((X) & 0xffe) >> 1) #define EXTRACT_PART(X) (((X) & 0xffff000) >> 12) #define EXTRACT_VER(X) (((X) & 0xf0000000) >> 28) /* A reserved manufacturer ID is used in END_OF_CHAIN_FLAG, so we * know that no valid TAP will have it as an IDCODE value. */ #define END_OF_CHAIN_FLAG 0xffffffff /* a larger IR length than we ever expect to autoprobe */ #define JTAG_IRLEN_MAX 60 static int jtag_examine_chain_execute(uint8_t *idcode_buffer, unsigned num_idcode) { struct scan_field field = { .num_bits = num_idcode * 32, .out_value = idcode_buffer, .in_value = idcode_buffer, }; /* initialize to the end of chain ID value */ for (unsigned i = 0; i < num_idcode; i++) buf_set_u32(idcode_buffer, i * 32, 32, END_OF_CHAIN_FLAG); jtag_add_plain_dr_scan(field.num_bits, field.out_value, field.in_value, TAP_DRPAUSE); jtag_add_tlr(); return jtag_execute_queue(); } static bool jtag_examine_chain_check(uint8_t *idcodes, unsigned count) { uint8_t zero_check = 0x0; uint8_t one_check = 0xff; for (unsigned i = 0; i < count * 4; i++) { zero_check |= idcodes[i]; one_check &= idcodes[i]; } /* if there wasn't a single non-zero bit or if all bits were one, * the scan is not valid. We wrote a mix of both values; either * * - There's a hardware issue (almost certainly): * + all-zeroes can mean a target stuck in JTAG reset * + all-ones tends to mean no target * - The scan chain is WAY longer than we can handle, *AND* either * + there are several hundreds of TAPs in bypass, or * + at least a few dozen TAPs all have an all-ones IDCODE */ if (zero_check == 0x00 || one_check == 0xff) { LOG_ERROR("JTAG scan chain interrogation failed: all %s", (zero_check == 0x00) ? "zeroes" : "ones"); LOG_ERROR("Check JTAG interface, timings, target power, etc."); return false; } return true; } static void jtag_examine_chain_display(enum log_levels level, const char *msg, const char *name, uint32_t idcode) { log_printf_lf(level, __FILE__, __LINE__, __func__, "JTAG tap: %s %16.16s: 0x%08x " "(mfg: 0x%3.3x (%s), part: 0x%4.4x, ver: 0x%1.1x)", name, msg, (unsigned int)idcode, (unsigned int)EXTRACT_MFG(idcode), jep106_manufacturer(EXTRACT_MFG(idcode)), (unsigned int)EXTRACT_PART(idcode), (unsigned int)EXTRACT_VER(idcode)); } static bool jtag_idcode_is_final(uint32_t idcode) { /* * Some devices, such as AVR8, will output all 1's instead * of TDI input value at end of chain. Allow those values * instead of failing. */ return idcode == END_OF_CHAIN_FLAG; } /** * This helper checks that remaining bits in the examined chain data are * all as expected, but a single JTAG device requires only 64 bits to be * read back correctly. This can help identify and diagnose problems * with the JTAG chain earlier, gives more helpful/explicit error messages. * Returns TRUE iff garbage was found. */ static bool jtag_examine_chain_end(uint8_t *idcodes, unsigned count, unsigned max) { bool triggered = false; for (; count < max - 31; count += 32) { uint32_t idcode = buf_get_u32(idcodes, count, 32); /* do not trigger the warning if the data looks good */ if (jtag_idcode_is_final(idcode)) continue; LOG_WARNING("Unexpected idcode after end of chain: %d 0x%08x", count, (unsigned int)idcode); triggered = true; } return triggered; } static bool jtag_examine_chain_match_tap(const struct jtag_tap *tap) { if (tap->expected_ids_cnt == 0 || !tap->has_idcode) return true; /* optionally ignore the JTAG version field - bits 28-31 of IDCODE */ uint32_t mask = tap->ignore_version ? ~(0xfU << 28) : ~0U; uint32_t idcode = tap->idcode & mask; /* Loop over the expected identification codes and test for a match */ for (unsigned ii = 0; ii < tap->expected_ids_cnt; ii++) { uint32_t expected = tap->expected_ids[ii] & mask; if (idcode == expected) return true; /* treat "-expected-id 0" as a "don't-warn" wildcard */ if (tap->expected_ids[ii] == 0) return true; } /* If none of the expected ids matched, warn */ jtag_examine_chain_display(LOG_LVL_WARNING, "UNEXPECTED", tap->dotted_name, tap->idcode); for (unsigned ii = 0; ii < tap->expected_ids_cnt; ii++) { char msg[32]; snprintf(msg, sizeof(msg), "expected %u of %u", ii + 1, tap->expected_ids_cnt); jtag_examine_chain_display(LOG_LVL_ERROR, msg, tap->dotted_name, tap->expected_ids[ii]); } return false; } /* Try to examine chain layout according to IEEE 1149.1 §12 * This is called a "blind interrogation" of the scan chain. */ static int jtag_examine_chain(void) { int retval; unsigned max_taps = jtag_tap_count(); /* Autoprobe up to this many. */ if (max_taps < JTAG_MAX_AUTO_TAPS) max_taps = JTAG_MAX_AUTO_TAPS; /* Add room for end-of-chain marker. */ max_taps++; uint8_t *idcode_buffer = calloc(4, max_taps); if (!idcode_buffer) return ERROR_JTAG_INIT_FAILED; /* DR scan to collect BYPASS or IDCODE register contents. * Then make sure the scan data has both ones and zeroes. */ LOG_DEBUG("DR scan interrogation for IDCODE/BYPASS"); retval = jtag_examine_chain_execute(idcode_buffer, max_taps); if (retval != ERROR_OK) goto out; if (!jtag_examine_chain_check(idcode_buffer, max_taps)) { retval = ERROR_JTAG_INIT_FAILED; goto out; } /* Point at the 1st predefined tap, if any */ struct jtag_tap *tap = jtag_tap_next_enabled(NULL); unsigned bit_count = 0; unsigned autocount = 0; for (unsigned i = 0; i < max_taps; i++) { assert(bit_count < max_taps * 32); uint32_t idcode = buf_get_u32(idcode_buffer, bit_count, 32); /* No predefined TAP? Auto-probe. */ if (!tap) { /* Is there another TAP? */ if (jtag_idcode_is_final(idcode)) break; /* Default everything in this TAP except IR length. * * REVISIT create a jtag_alloc(chip, tap) routine, and * share it with jim_newtap_cmd(). */ tap = calloc(1, sizeof(*tap)); if (!tap) { retval = ERROR_FAIL; goto out; } tap->chip = alloc_printf("auto%u", autocount++); tap->tapname = strdup("tap"); tap->dotted_name = alloc_printf("%s.%s", tap->chip, tap->tapname); tap->ir_length = 0; /* ... signifying irlen autoprobe */ tap->ir_capture_mask = 0x03; tap->ir_capture_value = 0x01; tap->enabled = true; jtag_tap_init(tap); } if ((idcode & 1) == 0 && !tap->ignore_bypass) { /* Zero for LSB indicates a device in bypass */ LOG_INFO("TAP %s does not have valid IDCODE (idcode=0x%" PRIx32 ")", tap->dotted_name, idcode); tap->has_idcode = false; tap->idcode = 0; bit_count += 1; } else { /* Friendly devices support IDCODE */ tap->has_idcode = true; tap->idcode = idcode; jtag_examine_chain_display(LOG_LVL_INFO, "tap/device found", tap->dotted_name, idcode); bit_count += 32; } /* ensure the TAP ID matches what was expected */ if (!jtag_examine_chain_match_tap(tap)) retval = ERROR_JTAG_INIT_SOFT_FAIL; tap = jtag_tap_next_enabled(tap); } /* After those IDCODE or BYPASS register values should be * only the data we fed into the scan chain. */ if (jtag_examine_chain_end(idcode_buffer, bit_count, max_taps * 32)) { LOG_ERROR("double-check your JTAG setup (interface, speed, ...)"); retval = ERROR_JTAG_INIT_FAILED; goto out; } /* Return success or, for backwards compatibility if only * some IDCODE values mismatched, a soft/continuable fault. */ out: free(idcode_buffer); return retval; } /* * Validate the date loaded by entry to the Capture-IR state, to help * find errors related to scan chain configuration (wrong IR lengths) * or communication. * * Entry state can be anything. On non-error exit, all TAPs are in * bypass mode. On error exits, the scan chain is reset. */ static int jtag_validate_ircapture(void) { struct jtag_tap *tap; uint8_t *ir_test = NULL; struct scan_field field; int chain_pos = 0; int retval; /* when autoprobing, accommodate huge IR lengths */ int total_ir_length = 0; for (tap = jtag_tap_next_enabled(NULL); tap; tap = jtag_tap_next_enabled(tap)) { if (tap->ir_length == 0) total_ir_length += JTAG_IRLEN_MAX; else total_ir_length += tap->ir_length; } /* increase length to add 2 bit sentinel after scan */ total_ir_length += 2; ir_test = malloc(DIV_ROUND_UP(total_ir_length, 8)); if (!ir_test) return ERROR_FAIL; /* after this scan, all TAPs will capture BYPASS instructions */ buf_set_ones(ir_test, total_ir_length); field.num_bits = total_ir_length; field.out_value = ir_test; field.in_value = ir_test; jtag_add_plain_ir_scan(field.num_bits, field.out_value, field.in_value, TAP_IDLE); LOG_DEBUG("IR capture validation scan"); retval = jtag_execute_queue(); if (retval != ERROR_OK) goto done; tap = NULL; chain_pos = 0; for (;; ) { tap = jtag_tap_next_enabled(tap); if (!tap) break; /* If we're autoprobing, guess IR lengths. They must be at * least two bits. Guessing will fail if (a) any TAP does * not conform to the JTAG spec; or (b) when the upper bits * captured from some conforming TAP are nonzero. Or if * (c) an IR length is longer than JTAG_IRLEN_MAX bits, * an implementation limit, which could someday be raised. * * REVISIT optimization: if there's a *single* TAP we can * lift restrictions (a) and (b) by scanning a recognizable * pattern before the all-ones BYPASS. Check for where the * pattern starts in the result, instead of an 0...01 value. * * REVISIT alternative approach: escape to some tcl code * which could provide more knowledge, based on IDCODE; and * only guess when that has no success. */ if (tap->ir_length == 0) { tap->ir_length = 2; while (buf_get_u64(ir_test, chain_pos, tap->ir_length + 1) == 1 && tap->ir_length < JTAG_IRLEN_MAX) { tap->ir_length++; } LOG_WARNING("AUTO %s - use \"jtag newtap %s %s -irlen %d " "-expected-id 0x%08" PRIx32 "\"", tap->dotted_name, tap->chip, tap->tapname, tap->ir_length, tap->idcode); } /* Validate the two LSBs, which must be 01 per JTAG spec. * * Or ... more bits could be provided by TAP declaration. * Plus, some taps (notably in i.MX series chips) violate * this part of the JTAG spec, so their capture mask/value * attributes might disable this test. */ uint64_t val = buf_get_u64(ir_test, chain_pos, tap->ir_length); if ((val & tap->ir_capture_mask) != tap->ir_capture_value) { LOG_ERROR("%s: IR capture error; saw 0x%0*" PRIx64 " not 0x%0*" PRIx32, jtag_tap_name(tap), (tap->ir_length + 7) / tap->ir_length, val, (tap->ir_length + 7) / tap->ir_length, tap->ir_capture_value); retval = ERROR_JTAG_INIT_FAILED; goto done; } LOG_DEBUG("%s: IR capture 0x%0*" PRIx64, jtag_tap_name(tap), (tap->ir_length + 7) / tap->ir_length, val); chain_pos += tap->ir_length; } /* verify the '11' sentinel we wrote is returned at the end */ uint64_t val = buf_get_u64(ir_test, chain_pos, 2); if (val != 0x3) { char *cbuf = buf_to_hex_str(ir_test, total_ir_length); LOG_ERROR("IR capture error at bit %d, saw 0x%s not 0x...3", chain_pos, cbuf); free(cbuf); retval = ERROR_JTAG_INIT_FAILED; } done: free(ir_test); if (retval != ERROR_OK) { jtag_add_tlr(); jtag_execute_queue(); } return retval; } void jtag_tap_init(struct jtag_tap *tap) { unsigned ir_len_bits; unsigned ir_len_bytes; /* if we're autoprobing, cope with potentially huge ir_length */ ir_len_bits = tap->ir_length ? tap->ir_length : JTAG_IRLEN_MAX; ir_len_bytes = DIV_ROUND_UP(ir_len_bits, 8); tap->expected = calloc(1, ir_len_bytes); tap->expected_mask = calloc(1, ir_len_bytes); tap->cur_instr = malloc(ir_len_bytes); /** @todo cope better with ir_length bigger than 32 bits */ if (ir_len_bits > 32) ir_len_bits = 32; buf_set_u32(tap->expected, 0, ir_len_bits, tap->ir_capture_value); buf_set_u32(tap->expected_mask, 0, ir_len_bits, tap->ir_capture_mask); /* TAP will be in bypass mode after jtag_validate_ircapture() */ tap->bypass = true; buf_set_ones(tap->cur_instr, tap->ir_length); /* register the reset callback for the TAP */ jtag_register_event_callback(&jtag_reset_callback, tap); jtag_tap_add(tap); LOG_DEBUG("Created Tap: %s @ abs position %d, " "irlen %d, capture: 0x%x mask: 0x%x", tap->dotted_name, tap->abs_chain_position, tap->ir_length, (unsigned) tap->ir_capture_value, (unsigned) tap->ir_capture_mask); } void jtag_tap_free(struct jtag_tap *tap) { jtag_unregister_event_callback(&jtag_reset_callback, tap); struct jtag_tap_event_action *jteap = tap->event_action; while (jteap) { struct jtag_tap_event_action *next = jteap->next; Jim_DecrRefCount(jteap->interp, jteap->body); free(jteap); jteap = next; } free(tap->expected); free(tap->expected_mask); free(tap->expected_ids); free(tap->cur_instr); free(tap->chip); free(tap->tapname); free(tap->dotted_name); free(tap); } int jtag_init_inner(struct command_context *cmd_ctx) { struct jtag_tap *tap; int retval; bool issue_setup = true; LOG_DEBUG("Init JTAG chain"); tap = jtag_tap_next_enabled(NULL); if (!tap) { /* Once JTAG itself is properly set up, and the scan chain * isn't absurdly large, IDCODE autoprobe should work fine. * * But ... IRLEN autoprobe can fail even on systems which * are fully conformant to JTAG. Also, JTAG setup can be * quite finicky on some systems. * * REVISIT: if TAP autoprobe works OK, then in many cases * we could escape to tcl code and set up targets based on * the TAP's IDCODE values. */ LOG_WARNING("There are no enabled taps. " "AUTO PROBING MIGHT NOT WORK!!"); /* REVISIT default clock will often be too fast ... */ } jtag_add_tlr(); retval = jtag_execute_queue(); if (retval != ERROR_OK) return retval; /* Examine DR values first. This discovers problems which will * prevent communication ... hardware issues like TDO stuck, or * configuring the wrong number of (enabled) TAPs. */ retval = jtag_examine_chain(); switch (retval) { case ERROR_OK: /* complete success */ break; default: /* For backward compatibility reasons, try coping with * configuration errors involving only ID mismatches. * We might be able to talk to the devices. * * Also the device might be powered down during startup. * * After OpenOCD starts, we can try to power on the device * and run a reset. */ LOG_ERROR("Trying to use configured scan chain anyway..."); issue_setup = false; break; } /* Now look at IR values. Problems here will prevent real * communication. They mostly mean that the IR length is * wrong ... or that the IR capture value is wrong. (The * latter is uncommon, but easily worked around: provide * ircapture/irmask values during TAP setup.) */ retval = jtag_validate_ircapture(); if (retval != ERROR_OK) { /* The target might be powered down. The user * can power it up and reset it after firing * up OpenOCD. */ issue_setup = false; } if (issue_setup) jtag_notify_event(JTAG_TAP_EVENT_SETUP); else LOG_WARNING("Bypassing JTAG setup events due to errors"); return ERROR_OK; } int swd_init_reset(struct command_context *cmd_ctx) { int retval, retval1; retval = adapter_init(cmd_ctx); if (retval != ERROR_OK) return retval; LOG_DEBUG("Initializing with hard SRST reset"); if (jtag_reset_config & RESET_HAS_SRST) retval = adapter_system_reset(1); retval1 = adapter_system_reset(0); return (retval == ERROR_OK) ? retval1 : retval; } int jtag_init_reset(struct command_context *cmd_ctx) { int retval = adapter_init(cmd_ctx); if (retval != ERROR_OK) return retval; LOG_DEBUG("Initializing with hard TRST+SRST reset"); /* * This procedure is used by default when OpenOCD triggers a reset. * It's now done through an overridable Tcl "init_reset" wrapper. * * This started out as a more powerful "get JTAG working" reset than * jtag_init_inner(), applying TRST because some chips won't activate * JTAG without a TRST cycle (presumed to be async, though some of * those chips synchronize JTAG activation using TCK). * * But some chips only activate JTAG as part of an SRST cycle; SRST * got mixed in. So it became a hard reset routine, which got used * in more places, and which coped with JTAG reset being forced as * part of SRST (srst_pulls_trst). * * And even more corner cases started to surface: TRST and/or SRST * assertion timings matter; some chips need other JTAG operations; * TRST/SRST sequences can need to be different from these, etc. * * Systems should override that wrapper to support system-specific * requirements that this not-fully-generic code doesn't handle. * * REVISIT once Tcl code can read the reset_config modes, this won't * need to be a C routine at all... */ if (jtag_reset_config & RESET_HAS_SRST) { jtag_add_reset(1, 1); if ((jtag_reset_config & RESET_SRST_PULLS_TRST) == 0) jtag_add_reset(0, 1); } else { jtag_add_reset(1, 0); /* TAP_RESET, using TMS+TCK or TRST */ } /* some targets enable us to connect with srst asserted */ if (jtag_reset_config & RESET_CNCT_UNDER_SRST) { if (jtag_reset_config & RESET_SRST_NO_GATING) jtag_add_reset(0, 1); else { LOG_WARNING("\'srst_nogate\' reset_config option is required"); jtag_add_reset(0, 0); } } else jtag_add_reset(0, 0); retval = jtag_execute_queue(); if (retval != ERROR_OK) return retval; /* Check that we can communication on the JTAG chain + eventually we want to * be able to perform enumeration only after OpenOCD has started * telnet and GDB server * * That would allow users to more easily perform any magic they need to before * reset happens. */ return jtag_init_inner(cmd_ctx); } int jtag_init(struct command_context *cmd_ctx) { int retval = adapter_init(cmd_ctx); if (retval != ERROR_OK) return retval; /* guard against oddball hardware: force resets to be inactive */ jtag_add_reset(0, 0); /* some targets enable us to connect with srst asserted */ if (jtag_reset_config & RESET_CNCT_UNDER_SRST) { if (jtag_reset_config & RESET_SRST_NO_GATING) jtag_add_reset(0, 1); else LOG_WARNING("\'srst_nogate\' reset_config option is required"); } retval = jtag_execute_queue(); if (retval != ERROR_OK) return retval; if (Jim_Eval_Named(cmd_ctx->interp, "jtag_init", __FILE__, __LINE__) != JIM_OK) return ERROR_FAIL; return ERROR_OK; } void jtag_set_verify(bool enable) { jtag_verify = enable; } bool jtag_will_verify(void) { return jtag_verify; } void jtag_set_verify_capture_ir(bool enable) { jtag_verify_capture_ir = enable; } bool jtag_will_verify_capture_ir(void) { return jtag_verify_capture_ir; } int jtag_power_dropout(int *dropout) { if (!is_adapter_initialized()) { /* TODO: as the jtag interface is not valid all * we can do at the moment is exit OpenOCD */ LOG_ERROR("No Valid JTAG Interface Configured."); exit(-1); } if (adapter_driver->power_dropout) return adapter_driver->power_dropout(dropout); *dropout = 0; /* by default we can't detect power dropout */ return ERROR_OK; } int jtag_srst_asserted(int *srst_asserted) { if (adapter_driver->srst_asserted) return adapter_driver->srst_asserted(srst_asserted); *srst_asserted = 0; /* by default we can't detect srst asserted */ return ERROR_OK; } enum reset_types jtag_get_reset_config(void) { return jtag_reset_config; } void jtag_set_reset_config(enum reset_types type) { jtag_reset_config = type; } int jtag_get_trst(void) { return jtag_trst == 1; } int jtag_get_srst(void) { return jtag_srst == 1; } void jtag_set_nsrst_delay(unsigned delay) { adapter_nsrst_delay = delay; } unsigned jtag_get_nsrst_delay(void) { return adapter_nsrst_delay; } void jtag_set_ntrst_delay(unsigned delay) { jtag_ntrst_delay = delay; } unsigned jtag_get_ntrst_delay(void) { return jtag_ntrst_delay; } void jtag_set_nsrst_assert_width(unsigned delay) { adapter_nsrst_assert_width = delay; } unsigned jtag_get_nsrst_assert_width(void) { return adapter_nsrst_assert_width; } void jtag_set_ntrst_assert_width(unsigned delay) { jtag_ntrst_assert_width = delay; } unsigned jtag_get_ntrst_assert_width(void) { return jtag_ntrst_assert_width; } static int jtag_select(struct command_context *ctx) { int retval; /* NOTE: interface init must already have been done. * That works with only C code ... no Tcl glue required. */ retval = jtag_register_commands(ctx); if (retval != ERROR_OK) return retval; retval = svf_register_commands(ctx); if (retval != ERROR_OK) return retval; retval = xsvf_register_commands(ctx); if (retval != ERROR_OK) return retval; return ipdbg_register_commands(ctx); } static struct transport jtag_transport = { .name = "jtag", .select = jtag_select, .init = jtag_init, }; static void jtag_constructor(void) __attribute__((constructor)); static void jtag_constructor(void) { transport_register(&jtag_transport); } /** Returns true if the current debug session * is using JTAG as its transport. */ bool transport_is_jtag(void) { return get_current_transport() == &jtag_transport; } int adapter_resets(int trst, int srst) { if (!get_current_transport()) { LOG_ERROR("transport is not selected"); return ERROR_FAIL; } if (transport_is_jtag()) { if (srst == SRST_ASSERT && !(jtag_reset_config & RESET_HAS_SRST)) { LOG_ERROR("adapter has no srst signal"); return ERROR_FAIL; } /* adapters without trst signal will eventually use tlr sequence */ jtag_add_reset(trst, srst); /* * The jtag queue is still used for reset by some adapter. Flush it! * FIXME: To be removed when all adapter drivers will be updated! */ jtag_execute_queue(); return ERROR_OK; } else if (transport_is_swd() || transport_is_hla() || transport_is_dapdirect_swd() || transport_is_dapdirect_jtag() || transport_is_swim()) { if (trst == TRST_ASSERT) { LOG_ERROR("transport %s has no trst signal", get_current_transport()->name); return ERROR_FAIL; } if (srst == SRST_ASSERT && !(jtag_reset_config & RESET_HAS_SRST)) { LOG_ERROR("adapter has no srst signal"); return ERROR_FAIL; } adapter_system_reset(srst); return ERROR_OK; } if (trst == TRST_DEASSERT && srst == SRST_DEASSERT) return ERROR_OK; LOG_ERROR("reset is not supported on transport %s", get_current_transport()->name); return ERROR_FAIL; } int adapter_assert_reset(void) { if (transport_is_jtag()) { if (jtag_reset_config & RESET_SRST_PULLS_TRST) jtag_add_reset(1, 1); else jtag_add_reset(0, 1); return ERROR_OK; } else if (transport_is_swd() || transport_is_hla() || transport_is_dapdirect_jtag() || transport_is_dapdirect_swd() || transport_is_swim()) return adapter_system_reset(1); else if (get_current_transport()) LOG_ERROR("reset is not supported on %s", get_current_transport()->name); else LOG_ERROR("transport is not selected"); return ERROR_FAIL; } int adapter_deassert_reset(void) { if (transport_is_jtag()) { jtag_add_reset(0, 0); return ERROR_OK; } else if (transport_is_swd() || transport_is_hla() || transport_is_dapdirect_jtag() || transport_is_dapdirect_swd() || transport_is_swim()) return adapter_system_reset(0); else if (get_current_transport()) LOG_ERROR("reset is not supported on %s", get_current_transport()->name); else LOG_ERROR("transport is not selected"); return ERROR_FAIL; } int adapter_config_trace(bool enabled, enum tpiu_pin_protocol pin_protocol, uint32_t port_size, unsigned int *trace_freq, unsigned int traceclkin_freq, uint16_t *prescaler) { if (adapter_driver->config_trace) { return adapter_driver->config_trace(enabled, pin_protocol, port_size, trace_freq, traceclkin_freq, prescaler); } else if (enabled) { LOG_ERROR("The selected interface does not support tracing"); return ERROR_FAIL; } return ERROR_OK; } int adapter_poll_trace(uint8_t *buf, size_t *size) { if (adapter_driver->poll_trace) return adapter_driver->poll_trace(buf, size); return ERROR_FAIL; }