/*************************************************************************** * Copyright (C) 2008 Lou Deluxe * * lou.openocd012@fixit.nospammail.net * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ /* * Command opcodes that can be sent over endpoint 1. * This codifies information provided by Rob Brown . * The buffer can contain several of these, but only one which returns data. * Some of these opcodes have arguments, which follow immediately. * If shorter than the packet size, trailing positions should be zero-filled. */ /* LED update enables: * When enabled, each LED is updated automatically. * When not enabled, each LED can be controlled manually with EP1_CMD_SET_PORTD_LEDS. */ #define EP1_CMD_LEDUE_BOTH (0x05) /* EP1_CMD_LEDUE_NONE has the side effect of turning the LEDs on */ #define EP1_CMD_LEDUE_NONE (0x06) #define EP1_CMD_LEDUE_ERROR (0x17) #define EP1_CMD_LEDUE_BUSY (0x18) #define EP1_CMD_DTC_STOP (0x0b) #define EP1_CMD_DTC_LOAD (0x0c) #define EP1_CMD_DTC_CALL (0x0d) #define EP1_CMD_SET_UPLOAD (0x0f) #define EP1_CMD_SET_DOWNLOAD (0x10) #define EP1_CMD_DTC_WAIT (0x12) #define EP1_CMD_DTC_GET_STATUS (0x15) /* a quick way to just read back one byte */ #define EP1_CMD_DTC_GET_CACHED_STATUS (0x16) /* Writes upper 2 bits (SHDN and SEL) of port D with argument */ #define EP1_CMD_SET_PORTD_VPP (0x19) /* Writes lower 2 bits (BUSY and ERROR) of port D with argument */ #define EP1_CMD_SET_PORTD_LEDS (0x1a) #define EP1_CMD_MEMORY_READ (0x28) #define EP1_CMD_MEMORY_WRITE (0x29) #define EP1_CMD_GET_FWREV (0xfe) #define EP1_CMD_GET_SERIAL (0xff)