# SPDX-License-Identifier: GPL-2.0-or-later
# NXP LS1046ARDB (Reference Design Board)
# This is for the "console" USB port on the front panel
# You must ensure that SW4-7 is in the "off" position

# NXP K20
# The firmware implements the old CMSIS-DAP v1 USB HID interface
# You must pass --enable-cmsis-dap to ./configure to enable it
source [find interface/cmsis-dap.cfg]

transport select jtag
reset_config srst_only

source [find target/ls1046a.cfg]

# The adapter can't handle 10MHz
adapter speed 5000