# Config for Gumstix Verdex XM4 and XL6P (PXA270) set CHIPNAME verdex source [find target/pxa270.cfg] # The board supports separate reset lines # Override this in the interface config for parallel dongles reset_config trst_and_srst separate # XM4 = 400MHz, XL6P = 600MHz...let's run at 0.1*400MHz=40MHz adapter_khz 40000 # flash bank # XL6P has 32 MB flash flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x02000000 2 2 $_TARGETNAME # XM4 has 16 MB flash #flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x01000000 2 2 $_TARGETNAME