# SPDX-License-Identifier: GPL-2.0-or-later
#
# Driver for the FT2232H JTAG chip on the Espressif DevkitJ board
# (and most other FT2232H and FT232H based boards)
#

adapter driver ftdi
ftdi vid_pid 0x0403 0x6010 0x0403 0x6014

# interface 1 is the uart
ftdi channel 0

# TCK, TDI, TDO, TMS: ADBUS0-3
# LEDs: ACBUS4-7

ftdi layout_init 0x0008 0xf00b
ftdi layout_signal LED -data 0x1000
ftdi layout_signal LED2 -data 0x2000
ftdi layout_signal LED3 -data 0x4000
ftdi layout_signal LED4 -data 0x8000

# ESP32 series chips do not have a TRST input, and the SRST line is connected to the EN pin.
# The target code doesn't handle SRST reset properly yet, so this is commented out:
# ftdi layout_signal nSRST -oe 0x0020
# reset_config srst_only