# SPDX-License-Identifier: GPL-2.0-or-later # # FlossJTAG # # http://github.com/esden/floss-jtag # # This is the pre v0.3 Floss-JTAG compatible config file. It can also be used # for newer versions of Floss-JTAG with empty or not populated EEPROM. If you # have several Floss-JTAG connected you have to use the USB ID to select a # specific one. # # If you have a Floss-JTAG WITH EEPROM that is programmed, use the # flossjtag.cfg file. # echo "WARNING!" echo "This file was not tested with real interface, it is based on code in ft2232.c." echo "Please report your experience with this file to openocd-devel mailing list," echo "so it could be marked as working or fixed." adapter driver ftdi ftdi device_desc "Dual RS232-HS" ftdi vid_pid 0x0403 0x6010 ftdi layout_init 0x0008 0x000b ftdi layout_signal nTRST -data 0x0010 -oe 0x0010 ftdi layout_signal nSRST -data 0x0040 -oe 0x0040