# # FlossJTAG # # http://github.com/esden/floss-jtag # # This is the v0.3 and v1.0 Floss-JTAG compatible config file. It relies on the # existence of an EEPROM on Floss-JTAG containing a name. If you have several # Floss-JTAG adapters connected you can use the serial number to select a # specific device. # # If your Floss-JTAG does not have an EEPROM, or the EEPROM is empty, use the # flossjtag-noeeprom.cfg file. # echo "WARNING!" echo "This file was not tested with real interface, it is based on code in ft2232.c." echo "Please report your experience with this file to openocd-devel mailing list," echo "so it could be marked as working or fixed." interface ftdi ftdi_vid_pid 0x0403 0x6010 ftdi_device_desc "FLOSS-JTAG" #ftdi_serial "FJ000001" ftdi_layout_init 0x0008 0x180b ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040 ftdi_layout_signal LED -data 0x0800 ftdi_layout_signal LED2 -data 0x1000