###################################### # Target: Atmel AT91SAM9G20 ###################################### if { [info exists CHIPNAME] } { set AT91_CHIPNAME $CHIPNAME } else { set AT91_CHIPNAME at91sam9g20 } source [find target/at91sam9.cfg] # Set fallback clock to 1/6 of worst-case clock speed (which would be the 32.768 kHz slow clock). adapter_khz 5 # Establish internal SRAM memory work areas that are important to pre-bootstrap loaders, etc. The # AT91SAM9G20 has two SRAM areas, one starting at 0x00200000 and the other starting at 0x00300000. # Both areas are 16 kB long. #$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 1 $_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x4000 -work-area-backup 1