#
# Microchip (formerly Atmel) SAM L1x target
#
# Note: These devices support SWD only.
#

transport select swd

if { [info exists CHIPNAME] } {
    set _CHIPNAME $CHIPNAME
} else {
    set _CHIPNAME saml1x
}

if { [info exists WORKAREASIZE] } {
   set _WORKAREASIZE $WORKAREASIZE
} else {
   set _WORKAREASIZE 0x800
}

swd newdap $_CHIPNAME cpu -expected-id 0x0bf11477
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu

set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap

$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0

if {![using_hla]} {
    cortex_m reset_config sysresetreq
}