# BlueField SoC Target

set _CHIPNAME bluefield

# Specify the target device
#rshim device /dev/rshim0/rshim

# Main DAP
if { [info exists DAP_TAPID] } {
   set _DAP_TAPID $DAP_TAPID
} else {
   set _DAP_TAPID 0x4ba00477
}

adapter speed 1500

swd newdap $_CHIPNAME cpu -expected-id $_DAP_TAPID
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu

# Initialize the target name and command variable.
set _TARGETNAME $_CHIPNAME.cpu
set _smp_command ""

# CTI relative address
set $_TARGETNAME.cti(0) 0xC4020000
set $_TARGETNAME.cti(1) 0xC4120000
set $_TARGETNAME.cti(2) 0xC8020000
set $_TARGETNAME.cti(3) 0xC8120000
set $_TARGETNAME.cti(4) 0xCC020000
set $_TARGETNAME.cti(5) 0xCC120000
set $_TARGETNAME.cti(6) 0xD0020000
set $_TARGETNAME.cti(7) 0xD0120000
set $_TARGETNAME.cti(8) 0xD4020000
set $_TARGETNAME.cti(9) 0xD4120000
set $_TARGETNAME.cti(10) 0xD8020000
set $_TARGETNAME.cti(11) 0xD8120000
set $_TARGETNAME.cti(12) 0xDC020000
set $_TARGETNAME.cti(13) 0xDC120000
set $_TARGETNAME.cti(14) 0xE0020000
set $_TARGETNAME.cti(15) 0xE0120000

# Create debug targets for a number of cores starting from core '_core_start'.
# Adjust the numbers according to board configuration.
set _core_start 0
set _cores 16

# Create each core
for { set _core $_core_start } { $_core < $_core_start + $_cores } { incr _core 1 } {
    cti create cti$_core -dap $_CHIPNAME.dap -baseaddr [set $_TARGETNAME.cti($_core)] -ap-num 0

    set _command "target create ${_TARGETNAME}$_core aarch64 \
                         -dap $_CHIPNAME.dap -coreid $_core -cti cti$_core"

    if { $_core != $_core_start } {
        set _smp_command "$_smp_command ${_TARGETNAME}$_core"
    } else {
        set _smp_command "target smp ${_TARGETNAME}$_core"
    }

    eval $_command
}

# Configure SMP
if { $_cores > 1 } {
    eval $_smp_command
}

# Make sure the default target is the boot core
targets ${_TARGETNAME}0

proc core_up { args } {
	global _TARGETNAME

	# Examine remaining cores
	foreach _core $args {
		${_TARGETNAME}$_core arp_examine
	}
}