# K1921VK01T # http://niiet.ru/chips/nis?id=354 source [find target/swj-dp.tcl] source [find mem_helper.tcl] if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { set _CHIPNAME k1921vk01t } set _ENDIAN little # Work-area is a space in RAM used for flash programming if { [info exists WORKAREASIZE] } { set _WORKAREASIZE $WORKAREASIZE } else { set _WORKAREASIZE 0x10000 } #jtag scan chain if { [info exists CPUTAPID] } { set _CPUTAPID $CPUTAPID } else { if { [using_jtag] } { set _CPUTAPID 0x4ba00477 } { # SWD IDCODE set _CPUTAPID 0x2ba01477 } } swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 flash bank $_CHIPNAME.flash niietcm4 0 0 0 0 $_TARGETNAME adapter_khz 2000 adapter_nsrst_delay 100 if {[using_jtag]} { jtag_ntrst_delay 100 } reset_config srst_nogate if {![using_hla]} { # if srst is not fitted use SYSRESETREQ to # perform a soft reset cortex_m reset_config sysresetreq }