# NXP LPC2478 ARM7TDMI-S with 512kB flash (8kB used by bootloader) and 98kB SRAM (16kB for ETH, 16kB for DMA, 2kB for RTC), clocked with 4MHz internal oscillator source [find target/lpc2xxx.cfg] # parameters: # - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000 # - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000 proc setup_lpc2478 {core_freq_khz adapter_freq_khz} { # 504kB flash and 64kB SRAM # setup_lpc2xxx setup_lpc2xxx lpc2478 0x4f1f0f0f 0x7e000 lpc2000_v2 0x10000 $core_freq_khz $adapter_freq_khz } proc init_targets {} { # default to core clocked with 4MHz internal oscillator echo "Warning - assuming default core clock 4MHz! Flashing may fail if actual core clock is different." # setup_lpc2478 setup_lpc2478 4000 500 }