# -*- tcl -*- # Target configuration for the Samsung s3c6410 system on chip # Tested on a SMDK6410 # Processor : ARM1176 # Info: JTAG device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0) # [Duane Ellis 27/nov/2008: Above 0x0032409d appears to be copy/paste from other places] # [and I do not believe it to be accurate, hence the 0xffffffff below] if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { set _CHIPNAME s3c6410 } if { [info exists ENDIAN] } { set _ENDIAN $ENDIAN } else { # this defaults to a bigendian set _ENDIAN little } # trace buffer if { [info exists ETBTAPID] } { set _ETBTAPID $ETBTAPID } else { set _ETBTAPID 0x2b900f0f } if { [info exists CPUTAPID] } { set _CPUTAPID $CPUTAPID } else { set _CPUTAPID 0x07b76f0f } #jtag scan chain jtag newtap $_CHIPNAME etb -irlen 4 -expected-id $_ETBTAPID jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm1176 adapter_nsrst_delay 500 jtag_ntrst_delay 500 #reset configuration reset_config trst_and_srst # trace setup ... NOTE, "normal full" mode fudges the real ETMv3.1 mode etm config $_TARGETNAME 16 normal full etb etb config $_TARGETNAME $_CHIPNAME.etb