# # lm3s icdi pseudo target # if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { set _CHIPNAME lm3s } # Work-area is a space in RAM used for flash programming # By default use 16kB if { [info exists WORKAREASIZE] } { set _WORKAREASIZE $WORKAREASIZE } else { set _WORKAREASIZE 0x4000 } # # possible value are hla_jtag # currently swd is not supported # transport select hla_jtag # do not check id as icdi currently does not support it hla newtap $_CHIPNAME cpu -expected-id 0 set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME hla_target -chain-position $_TARGETNAME $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 # flash configuration ... autodetects sizes, autoprobed flash bank $_CHIPNAME.flash stellaris 0 0 0 0 $_TARGETNAME