jtag_nsrst_delay 200 jtag_ntrst_delay 200 #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst srst_pulls_trst #LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough jtag_reset 1 1 jtag_reset 0 0 #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag newtap lpc2148 one -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f #target configuration #daemon_startup reset set _TARGETNAME [format "%s.cpu" lpc2148] target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-virt 0 -work-area-backup 0 $_TARGETNAME configure -event reset-init { soft_reset_halt mvb 0xE01FC040 0x01 } flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765