#daemon configuration telnet_port 4444 gdb_port 3333 # tell gdb our flash memory map # and enable flash programming gdb_memory_map enable gdb_flash_program enable #interface interface ft2232 ft2232_device_desc "Amontec JTAGkey A" ft2232_layout jtagkey ft2232_vid_pid 0x0403 0xcff8 jtag_speed 0 jtag_nsrst_delay 200 jtag_ntrst_delay 200 #use combined on interfaces or targets that can't set TRST/SRST separately reset_config srst_only srst_pulls_trst #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe #target configuration daemon_startup reset #target #target arm7tdmi target arm7tdmi little 0 arm7tdmi target_script 0 reset .\prj\sam7s256_reset.script working_area 0 0x00200000 0x4000 nobackup #flash bank flash bank at91sam7 0 0 0 0 0 # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger