source archive release.
JTAG Layer:
- * New CMSIS-DAP driver
- * Andes AICE debug adapter support
- * New OpenJTAG driver
- * New BCM2835 (RaspberryPi) driver
- * JTAG VPI client driver (for OpenRISC Reference Platform SoC)
- * Xilinx BSCAN_* for OpenRISC support
- * ST-LINKv2-1 support
- * ST-LINKv2 SWO tracing support (UART emulation)
- * JLink-OB (onboard) support
- * Altera USB Blaster driver rewrite, initial Blaster II
- support
- * ULINK driver ported to libusb-1.0, OpenULINK build fixes
- * Support up to 64 bit IR lengths
- * SVF playback (FPGA programming) fixes
- * "ftdi" interface driver got extensive testing and is now
- recommended over the old ft2232 implementation
+ * SWD support with FTDI, Versaloon, J-Link, sysfsgpio
+ * CMSIS-DAP massive speed and stability improvements
+ * Versaloon driver ported to libusb-1.0
+ * STLink can reestablish communication with a target that was
+ disconnected or rebooted
+ * STLink FAULT and WAIT SWD handling improved
+ * New hla_serial command to distinguish between several HLA
+ adapters attached to a single machine
+ * Serial number support for CMSIS-DAP and J-Link adapters
+ * Support for more J-Link adapters
+ * TAP autoprobing improvements
+ * Big speedup for SVF playback with USB Blaster
Boundary Scan:
Target Layer:
- * New target: Andes nds32
- * New target: OpenRISC OR1K
- * New target: Intel Quark X10xx
- * MIPS EJTAG 1.5/2.0 support
- * MIPS speed improvements
- * Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE
- hosts now
- * XScale vector_catch support, reset fixes
- * dsp563xx ad-hoc breakpoint/watchpoint support
- * RTOS support for embKernel
- * Target profiling improvements
- * Memory access functions testbench
+ * Stability improvements for targets that get disconnected or
+ rebooted during a debug session
+ * MIPS speed and reliability improvements
+ * MIPS 1.5/2.0 fixes
+ * ARMv7-R improvements
+ * Cortex-A improvements, A7, A15 MPCores support
+ * FPU support for ARMv7-M (Cortex-M4F)
+ * TPIU/ITM support (including SWO/SWV tracing), can be
+ captured with external tools or STLink
+ * JTAG Serial Port (Advanced Debug System softcore) support
+ * Profiling support for OpenRISC
+ * ChibiOS/RT 3.0 support (with and without FPU)
+ * FreeRTOS current versions support
+ * Freescale MQX RTOS support
+ * GDB target description support for MIPS
+ * The last created target is auto-selected as the current
Flash Layer:
- * STM32 family sync with reference manuals, other bugfixes
- * STM32F401, STM32F07x support
- * Atmel SAM4L, SAMG5x support
- * at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s,
- at91sam3n0{a,b,0a,0b} support, bugfixes
- * Atmel SAMD support
- * Milandr 1986ВЕ* support
- * Kinetis KL, K21 support
- * Nuvoton NuMicro MINI5{1,2,4} support
- * Nuvoton NUC910 series support
- * NXP LPC43xx, LPC2000 fixes
- * NXP LPC800, LPC810 support
- * More ATmega parts supported
- * Fujitsu MB9Ax family support
- * EFM32 Wonder Gecko family support
- * Nordic nRF51 support
+ * nRF51 async loader to improve flashing performance and stability
+ * Cypress PSoC 41xx/42xx family flash driver
+ * Silabs SiM3 family flash driver
+ * Marvell Wireless Microcontroller SPI flash driver
+ * Kinetis mass erase (part unsecuring) implemented
+ * lpcspifi stability fixes
+ * STM32 family sync with reference manuals, L0 support, bugfixes
+ * LPC2000 driver automatically determines part and flash size
+ * NXP LPC11(x)xx, LPC13xx, LPC15xx, LPC8xx, LPC5410x, LPC407x support
+ * Atmel SAMD, SAMR, SAML21 devices support
+ * Atmel SAM4E16 support
+ * ZeroGecko family support
+ * TI Tiva C Blizzard and Snowflake families support
+ * Nuvoton NuMicro M051 support
Board, Target, and Interface Configuration Scripts:
- * STM32W108xx generic target config
- * STM32F429 discovery board config
- * STM32 Nucleo boards configs
- * DENX M53EVK board config
- * Altera Cyclone V SoC, SoCkit config
- * New TI Launchpads board configs
- * TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board
- configs
- * Marvell Armada 370 family initial support
- * TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts
- * Freescale FRDM-KL25Z, KL46Z board configs
- * Digilent Zedboard config
- * Asus RT-N16, Linksys WRT54GL board configs
- * Atmel Xplained initial support
- * Broadcom bcm28155_ap board config
- * TUMPA, TUMPA Lite interface configs
- * Digilent JTAG-SMT2 interface config
- * New RAM testing functions
- * Easy-to-use firmware recovery helpers targetting ordinary
- users with common equipment
+ * Normal target configs can work with HLA (STLink, ICDI) adapters
+ * STM32 discovery and Nucleo boards configs
+ * Gumstix AeroCore board config
+ * General Plus GP326XXXA target config
+ * Micrel KS869x target config
+ * ASUS RT-N66U board config
+ * Atmel SAM4E-EK board config
+ * Atmel AT91SAM4L proper reset handling implemented
+ * TI OMAP/AM 3505, 3517 target configs
+ * nRF51822-mKIT board config
+ * RC Module К1879ХБ1Я target config
+ * TI TMDX570LS20SUSB board config
+ * TI TMS570 USB Kit board config
+ * TI CC2538, CC26xx target configs
+ * TI AM437x major config improvements, DDR support
+ * TI AM437X IDK board config
+ * TI SimpleLink Wi-Fi CC3200 LaunchPad configs
+ * Silicon Labs EM357, EM358 target configs
+ * Infineon XMC1000, XMC4000 family targets and boards configs
+ * Atheros AR9331 target config
+ * TP-LINK TL-MR3020 board config
+ * Alphascale asm9260t target and eval kit configs
+ * Olimex SAM7-LA2 (AT91SAM7A2) board config
+ * EFM32 Gecko boards configs
+ * Spansion FM4 target and SK-FM4-176L-S6E2CC board configs
+ * LPC1xxx target configs were restructured
+ * IoT-LAB debug adapter config
+ * DP BusBlaster KT-Link compatible config
Server Layer:
- * Auto-generation of GDB target description for ARMv7-M,
- ARM4, nds23, OR1K, Quark
- * GDB File-I/O Remote Protocol extension support
- * Default GDB flashing events handlers to initialise and reset
- the target automatically when "load" is used
+ * Polling period can be configured
+ * "shutdown" command has an immediate effect
+ * The "program" command doesn't lead to a shutdown by
+ default, use optional "exit" parameter for the old behaviour
+ * Proper OS signal handling was implemented
+ * Async target notifications for the Tcl RPC
Documentation:
- * Extensive README* changes
- * The official User's Guide was proofread
- * Example cross-build script
- * RTOS documentation improvements
- * Tcl RPC documentation added
Build and Release:
- * *BSD, OS X, clang, ARM, windows build fixes
- * New pkg-config support changes the way libusb (and other
- dependencies) are handled. Many adapter drivers are now
- selected automatically during the configure stage.
This release also contains a number of other important functional and
cosmetic bugfixes. For more details about what has changed since the
last release, see the git repository history:
-http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path=
+http://sourceforge.net/p/openocd/code/ci/v0.9.0-rc1/log/?path=
For older NEWS, see the NEWS files associated with each release
Code Review / openocd.git / blobdiff