target/cortex_m: simplify cortex_m_unset_breakpoint()

[openocd.git] / NEWS

diff --git a/NEWS b/NEWS
index db4485dae172db70034a605b551ca33b28e42594..9df165004a17b561a1a9b7f37a9506a7cfb53a6f 100644 (file)
--- a/NEWS
+++ b/NEWS
@@ -1,63 +1,29 @@
-This file includes highlights of the changes made in the
-OpenOCD 0.5.0 source archive release.  See the repository
-history for details about what changed, including bugfixes
-and other issues not mentioned here.
+This file includes highlights of the changes made in the OpenOCD
+source archive release.
 
 JTAG Layer:
-       New driver for "Bus Pirate"
-       Rename various commands so they're not JTAG-specific
-          There are migration procedures for most of these, but you should
-          convert your scripts to the new names, since those procedures
-          will not be around forever.
-               jtag jinterface ... is now adapter_name
-               jtag_khz        ... is now adapter_khz
-               jtag_nsrst_delay ... is now adapter_nsrst_delay
-               jtag_nsrst_assert_width ... is now adapter_nsrst_assert_width
-       Support Voipac VPACLink JTAG Adapter.
 
 Boundary Scan:
 
 Target Layer:
-       ARM:
-               - basic semihosting support (ARMv7M).
-               - renamed "armv7m" command prefix as "arm"
-       MIPS:
-               - "ejtag_srst" variant removed. The same functionality is
-                 obtained by using "reset_config none".
-               - added PIC32MX software reset support, this means srst is not
-                 required to be connected anymore.
 
 Flash Layer:
-       New "stellaris recover" command, implements the procedure
-               to recover locked devices (restoring non-volatile
-               state to the factory defaults, including erasing
-               the flash and its protection bits, and possibly
-               re-enabling hardware debugging).
-       PIC32MX now uses algorithm for flash programming, this
-               has increased the performance by approx 96%.
-       New 'pic32mx unlock' cmd to remove readout protection.
-       New STM32 Value Line Support.
-       New 'virtual' flash driver, used to associate other addresses
-               with a flash bank. See pic32mx.cfg for usage.
-       New iMX27 NAND flash controller driver.
 
 Board, Target, and Interface Configuration Scripts:
-       Support IAR LPC1768 kickstart board (by Olimex)
-       Support Voipac PXA270/PXA270M module.
-       New $PARPORTADDR tcl variable used to change default
-               parallel port address used.
 
-Core Jim/TCL Scripting:
-       New "add_script_search_dir" command, behaviour is the same
-               as the "-s" cmd line option.
+Server Layer:
 
 Documentation:
 
 Build and Release:
 
-For more details about what has changed since the last release,
-see the git repository history.  With gitweb, you can browse that
-in various levels of detail.
+
+This release also contains a number of other important functional and
+cosmetic bugfixes. For more details about what has changed since the
+last release, see the git repository history:
+
+http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path=
+
 
 For older NEWS, see the NEWS files associated with each release
 (i.e. NEWS-<version>).
@@ -65,4 +31,3 @@ For older NEWS, see the NEWS files associated with each release
 For more information about contributing test reports, bug fixes, or new
 features and device support, please read the new Developer Manual (or
 the BUGS and PATCHES.txt files in the source archive).
-