openocd: use unique name for struct command_registration

[openocd.git] / README.Windows

diff --git a/README.Windows b/README.Windows
index 9cdd55c5c2236b53de19bbc2384fd7fe3a893a9f..7326a356cab870ae684d3d55245293eba6ea19e6 100644 (file)
--- a/README.Windows
+++ b/README.Windows
@@ -7,6 +7,9 @@ recommended as it doesn't provide enough C99 compatibility).
 Alternatively, one can cross-compile it using MinGW-w64 on a *nix
 host. See README for the generic instructions.
 
+Also, the MSYS2 project provides both ready-made binaries and an easy
+way to self-compile from their software repository out of the box.
+
 Native MinGW-w64/MSYS compilation
 -----------------------------
 
@@ -22,16 +25,20 @@ installation.
 USB adapters
 ------------
 
-You usually need to have WinUSB.sys (or libusbK.sys) driver installed
-for a USB-based adapter. Some vendor software (e.g. for ST-LINKv2)
-does it on its own. For the other cases the easiest way to assign
-WinUSB to a device is to use the latest Zadig installer:
+For the adapters that use a HID-based protocol, e.g. CMSIS-DAP, you do
+not need to perform any additional configuration.
+
+For all the others you usually need to have WinUSB.sys (or
+libusbK.sys) driver installed. Some vendor software (e.g. for
+ST-LINKv2) does it on its own. For the other cases the easiest way to
+assign WinUSB to a device is to use the latest Zadig installer:
 
   http://zadig.akeo.ie
 
-For the old drivers that use libusb-0.1 API you might need to link
-against libusb-win32 headers and install the corresponding driver with
-Zadig.
+When using a composite USB device, it's often necessary to assign
+WinUSB.sys to the composite parent instead of the specific
+interface. To do that one needs to activate an advanced option in the
+Zadig installer.
 
 If you need to use the same adapter with other applications that may
 require another driver, a solution for Windows Vista and above is to