* Ka-Ro TRITON starterkit II JTAG cable
* Lattice parallel port JTAG cable
* ST FlashLINK programming cable
+ * Wiggler 2 cable (basically a wiggler with an LED)
- The Amontec JTAG Accelerator. This is a configuration for Amontec's Chameleon
dongle, a parallel port interface based on a Xilinx CoolRunner CPLD. It uses
Another USB JTAG programmer, with freely available schematics. It supports
target voltages from 1.65V to 5.5V.
-* Hitex STR9-comSTICK: http://www.ehitex.de/p_info.php?products_id=292
+* Hitex STR9-comStick: http://www.ehitex.de/p_info.php?products_id=292
A STR912FW44x microcontroller "board" with USB and JTAG functionality.
+* Hitex STM32-PerformanceStick: http://www.hitex.com/stm32-stick/
+A STM32F103RBT6 microcontroller "board" with USB and JTAG functionality.
+
* Luminary Micro development board evb_lm3s811 JTAG interface.
* ASIX PRESTO: http://www.asix-tools.com/prg_presto.htm
The usbprog is a freely programmable USB adapter, which can (among other
things) use a firmware which turns it into a JTAG programmer/debugger.
+* Altium universal JTAG cable
+
All FT2232 based devices may be accessed using either FTDI's proprietary FTD2XX
library (www.ftdichip.com) or using an open-source replacement from
http://www.intra2net.com/de/produkte/opensource/ftdi/index.php, also included
- PXA27x
- IXP42x
+And support for the Marvell Feroceon CPU core as found in the
+Orion SoC family is included as well.
+
3. Host platforms
OpenOCD was originally developed on x86-Linux, but has since then been ported
Documentation for the OpenOCD is hosted in the Berlios OpenFacts Wiki at
http://openfacts.berlios.de/index-en.phtml?title=Open_On-Chip_Debugger.
+There is also and openocd(1) manpage, the 'openocd --help' output and
+an OpenOCD info page (type 'info openocd').
+
5. Licensing
OpenOCD is licensed under the terms of the GNU General Public License, see the