cmsis-dap: print vendor and product id on open failure

[openocd.git] / README

diff --git a/README b/README
index c5c1e62874918927a0803264dd92184ee4613734..68a7ea90724b944a9b08483c30ebf5af1b99d238 100644 (file)
--- a/README
+++ b/README
@@ -7,9 +7,9 @@ layered architecture of JTAG interface and TAP support including:
 - (X)SVF playback to faciliate automated boundary scan and FPGA/CPLD
   programming;
 - debug target support (e.g. ARM, MIPS): single-stepping,
-  breakpoints/watchpoints, etc;
+  breakpoints/watchpoints, gprof profiling, etc;
 - flash chip drivers (e.g. CFI, NAND, internal flash);
-- embedded TCL intepreter for easy scripting.
+- embedded TCL interpreter for easy scripting.
 
 Several network interfaces are available for interacting with OpenOCD:
 telnet, TCL, and GDB. The GDB server enables OpenOCD to function as a
@@ -39,7 +39,11 @@ If you are connecting a particular adapter with some specific target,
 you need to source both the jtag interface and the target configs,
 e.g.:
 
-  openocd -f interface/ftdi/jtagkey2.cfg -f target/ti_calypso.cfg
+  openocd -f interface/ftdi/jtagkey2.cfg -c "transport select jtag" \
+          -f target/ti_calypso.cfg
+
+  openocd -f interface/stlink-v2-1.cfg -c "transport select hla_swd" \
+          -f target/stm32l0.cfg
 
 NB: when using an FTDI-based adapter you should prefer configs in the
 ftdi directory; the old configs for the ft2232 are deprecated.
@@ -101,12 +105,13 @@ JTAG adapters
 -------------
 
 AICE, ARM-JTAG-EW, ARM-USB-OCD, ARM-USB-TINY, AT91RM9200, axm0432,
-BCM2835, Bus Blaster, Buspirate, Chameleon, Cortino, DLC 5,
-DLP-USB1232H, embedded projects, eStick, FlashLINK, FlossJTAG,
-Flyswatter, Flyswatter2, Hoegl, ICDI, ICEBear, J-Link, JTAGkey,
-JTAGkey2, JTAG-lock-pick, KT-Link, Lisa/L, LPC1768-Stick, MiniModule,
-NGX, NXHX, OOCDLink, Opendous, OpenJTAG, Openmoko, OpenRD, OSBDM,
-Presto, Redbee, RLink, SheevaPlug devkit, Stellaris evkits, ST-LINK,
+BCM2835, Bus Blaster, Buspirate, Chameleon, CMSIS-DAP, Cortino, DENX,
+Digilent JTAG-SMT2, DLC 5, DLP-USB1232H, embedded projects, eStick,
+FlashLINK, FlossJTAG, Flyswatter, Flyswatter2, Gateworks, Hoegl, ICDI,
+ICEBear, J-Link, JTAG VPI, JTAGkey, JTAGkey2, JTAG-lock-pick, KT-Link,
+Lisa/L, LPC1768-Stick, MiniModule, NGX, NXHX, OOCDLink, Opendous,
+OpenJTAG, Openmoko, OpenRD, OSBDM, Presto, Redbee, RLink, SheevaPlug
+devkit, Stellaris evkits, ST-LINK (SWO tracing supported),
 STM32-PerformanceStick, STR9-comStick, sysfsgpio, TUMPA, Turtelizer,
 ULINK, USB-A9260, USB-Blaster, USB-JTAG, USBprog, VPACLink, VSLLink,
 Wiggler, XDS100v2, Xverve.
@@ -116,15 +121,16 @@ Debug targets
 
 ARM11, ARM7, ARM9, AVR32, Cortex-A, Cortex-R, Cortex-M,
 Feroceon/Dragonite, DSP563xx, DSP5680xx, FA526, MIPS EJTAG, NDS32,
-XScale.
+XScale, Intel Quark.
 
 Flash drivers
 -------------
 
 ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, Kinetis,
-LPC2000, LPC2900, LPCSPIFI, PIC32mx, Stellaris, STM32, STMSMI, STR7x,
-STR9x; NAND controllers of AT91SAM9, LPC3180, LPC32xx, i.MX31, MXC,
-NUC910, Orion/Kirkwood, S3C24xx, S3C6400.
+LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPCSPIFI, Marvell QSPI,
+Milandr, NuMicro, PIC32mx, PSoC4, SiM3x, Stellaris, STM32, STMSMI,
+STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180, LPC32xx,
+i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400.
 
 
 ==================
@@ -214,7 +220,7 @@ You'll also need:
 
 Additionally, for building from git:
 
-- autoconf >= 2.59
+- autoconf >= 2.64
 - automake >= 1.9
 - texinfo
 
@@ -228,14 +234,16 @@ drivers need either one of:
   - ftd2xx: http://www.ftdichip.com/Drivers/D2XX.htm (proprietary,
     GPL-incompatible)
 
+CMSIS-DAP support needs HIDAPI library.
+
 Permissions delegation
 ----------------------
 
 Running OpenOCD with root/administrative permissions is strongly
 discouraged for security reasons.
 
-For USB devices on GNU/Linux you should use the contrib/openocd.udev
-rules file. It probably belongs somewhere in /etc/udev/rules.d, but
+For USB devices on GNU/Linux you should use the contrib/99-openocd.rules
+file. It probably belongs somewhere in /etc/udev/rules.d, but
 consult your operating system documentation to be sure. Do not forget
 to add yourself to the "plugdev" group.